Professional Documents
Culture Documents
COD (MR) - IBD18011207 Haji Pashtoon
COD (MR) - IBD18011207 Haji Pashtoon
COD (MR) - IBD18011207 Haji Pashtoon
General
1 Type of Lift VR 2 Control Simplex fill in group units and lift no.
Hoistway
12 Hoistway Size (Inner) 2000 mm(Width) × 2000 mm(Depth) 13 Nosing Without
18 Machine Room Size mm(Width) × mm(Depth) × mm(Height) Fill 18,19 items,if the lift has machine
19 Machine Room Heightened Partly No(Std) ( )mm room
20 Other If under pit people can overpass or hoistway safety gate is needed,Pl fill this item
Cabin
21 Cabin Size (Inner) ...... mm(Width) × .......... mm(Depth) × 2300 mm(Height) Net
22 Cabin Type U-CR088 If fill in, no need to fill below wall information unless there is different requirement
28 Mirror None(STD)
29 NOTE:
Door system
30 Clear Open Size 800 mm(Width) × 2100 mm(Height) 31 Open Type 2P-C.O
32 Door Protector WECO Infrared Curtain(STD) 33 Landing Door Fire Rated Require STD(No-Fire Rated)
34 Car Door Hairline ST.ST(443) TYPE jarless-con 35 Wide Jamb Type None(STD)
Landing Door Hairline ST.ST(443) STD(No-Fire Rated) 1 Hairline ST.ST(443) STD(No-Fire Rated) 11
Note:Side Opening Definition: Stand inside of the car and face the door,the door opening from left to right is 2P-RS.O;otherwise is 2P-LS.O
38 Faceplate Hairline(STD)
41 Language English
42 Brand XIZI Otis Pls supply brand type if you choose "OEM" .
Hall Operation Panel
43 HOP TYPE U-ZW1600
44 Faceplate Hairline(STD)
Duplex G2C (HB & HPI Separated ) Duplex G2C (HB & HPI Separated ) Other *
At floors At floors
49 Note
Functions
EFO YES EFS YES ARD YES Open Door in advance NO
50 B/A Reservation NO Attendant Service NO Independent Service NO Voice Announcement NO
Auto releveling NO EMS NO IC Card NO
G 3600 ① Places
CHANGES
⑤ Places
Remaks: 1) Pls confirm the location and quantity of fan if the ceilling is solved locally
2) Pls provide fixed the size of the door protection if it is solved locally,or consider according to no protection
3) Pls fill the wide jamb ODF if you choose wide Jamb
4) Different lift type should be fill separate COD. Unfilled item will be based on standard of part A.
5) The production will be according to this COD after confirming by both parties.