Professional Documents
Culture Documents
Structure With A Circular Slab Data
Structure With A Circular Slab Data
Data:
1.Geometry Creation :
Select Top portion of ring beam New view Plan view (top view)
Select surface meshing Select all the nodes along periphery one by one using
surface meshing Change No. of divisions=3 Ok. Go to whole structure.
2. Member Property :
Click General Property Define Circle YD=0.45m (Column) Add.
4. Loading :
Click Load case Details Add.
Primary Number :1 Loading type: none Title: Load case 1 Add .
Click Load case 1 details Add.
Self weight Y Factor=-1 Add.
Plate loadsPressure on Full Plates W1=-1KN/m2 GY Add.
Highlight selfweight Select geometry cursor & select entire structure Assign to
selected beam/plates Assign Yes.
5. Analysis Type:
Click Analysis/print No print Add Close.
Click post print Define commands Load list select Load comb AddClick
analysis Results Add Close,
Note: Save the File before Run the Program.
6. Design :
Click Design ConcreteCurrent code : IS456 Define Parameters
Fc=20,000KN/m2 Add.
Click Design commands Design slab elements AddClose.
Highlight Fck=20000 and select plate cursor and select entire structure
Assign to selected beams/plates Assign Yes.
Highlight Design of slab elements Top plan view Select a triangular portion of
one or two portion Assign to selected beams/plates Assign Yes.
7. Analysis:
From Main Menu ` Analysis Run Analysis Done.
8.Results :
Go to post processing mode.
Select load case 1 Ok. Click Summary of results of max. and Mini. Displacement
for nodes given in Table form.
Fig. 12 Result- summary Max. and mini. Displacement of nodes
Results Plate stress contour Select Load case 1 Stress Type: Mx (Local)
Apply Ok.
Results Plate stress contour Select Load case 1 Stress Type: My (Local)
Apply Ok. Go to Top view. You can see almost Mx=My (Because of circular
shape of slab). Deflection =9mm.
Fig. 14 Max. and mini. Bending moment My (local)
Go to Staad output Click Concrete design and see the reinforcement of circular
slab. +Z-top slab reinforcement. Longitudinal reinforcement is at bottom.
Fig. 16 Slab Element Design summary -Min. & Max. reinforcement area for
bending moment Mx and My