Professional Documents
Culture Documents
Manual Biostar 2
Manual Biostar 2
Adding a User
2. Select the device that you want to enroll with in the Device dropdown menu. If you are
suing a BioMini, ensure that you have installed its driver and that the USB Device Agent
is running. A download link for the USB device agent can be found in BioStar's settings
under USB Agent.
3. Beside Quality, you can set the enrollment quality. Any enrollment score below the one
selected will be rejected. The default enrollment quality is 80. If needed, based on the
user's enrollment experience, you can set the quality to 40 or 60.
4. To add a fingerprint, click Add. Up to 10 fingerprints can be added per user.
5. To enroll a finger, click Scan.
6. Follow the instructions on the screen. If fingerprints are enrolled incorrectly, fingerprint
authentication may become inconsistent and very difficult.
7. When you have at least two fingers scanned, you can select duress fingers that will set
off silent alarms when used to authenticate by using the checkbox under
the Validate button.
8. When you are finished scanning fingerprints, click Enroll.
9. To save your settings, click Apply.
Adding a Card
2. In the Card Type dropdown, select the card type that you want to add.
3. In the Card Data Format dropdown, select the format of the card you want to add.
4. In the Registration Option dropdown, you can choose to read the card information from a
device, to assign it from a previously read card, or to enter the information manually.
a. If you select the first option, make sure to select with device you are using in
the Device dropdown. Only devices that can read the selected card type will appear.
Ensure that the Wiegand settings of the device match that of your card or the device
won't be able to read it. Then, click Read Card and place your card near the reader.
5. Once you have obtained your card information, click Enroll.
6. To save your settings, click Apply.
Adding a User Group
1 Click USER.
2)
Note
▪ User groups may be created in up to 8 levels.
▪ Up to 48 characters may be entered for a user group name.
TIME ATTANDANCE
You can set the time code, time segment for time code, schedule template, and overtime
rule. These are the main components of T&A management.
TIME CODE
You can set the time code to be used for worktime calculation. It can be set for T&A
records, time code for overtime, and time code for vacation management.
You can assign and use a different time rate for each time code.
No
Item Description
.
1 Name Enter the desired time code name.
Descriptio
2 Enter a brief description of the time code.
n
Set the time code type.
▪ Attendance management: You can set the time code to be used for the T&A record.
3 Type
▪ Overtime management: You can set the time code to be used for overtime.
▪ Leave management: You can set the time code to be used for go out, outside work, b
Note
▪ If the time code currently used by shift, Type cannot be changed.
4 Time Rate Set the time rate according to the time code. 1 is the default time rate. If 2 is set, it is ca
3) To save settings, click Apply. To add a service rule, click Apply & Add Shift.
SHIFT
You can create a shift by applying a different time code for each hour based on a
24 hour cycle. You can select either a fixed working shift or flexible working shift,
and you can set the start time of day and ding rule.
3 Type Fixed: You can set the fixed service to attend and leave
▪ at a fixed time.
Flexible: You can set the flexible service with no fixed
▪ attendance and leave times.
4 Day Start Time Set the start time of day.
When Yes is set, the first user authentication time is
recorded as check-in time, and the last user
authentication time is recorded as check-out time.
First check-in &
5 Note
Last check-out
If the First check-in & Last check-out is set to Yes,
Break by Punch should be set for recording the us’s
break time.
When Fixed is selected for Type,
6 Time segment
Select the salary code set as T&A record and then set
Start time, End time and Min. Duration. You can also
set Grace and Automatic meal deduction. When setting
is finished, click Add.
Note
You can only add one time code set as Attendance
▪ management to the service rule.
For the time code set as Overtime management, you
▪ can only set Start time and End time.
Note
If Flexible is selected for Type, the overtime service
▪ salary code cannot be added.
You can set the time rounding rule. Unit is the time to
round off to and Point is the time to apply rounding off.
For example, 10 minutes are set for Unit and 7 minutes
are set for Point, an event occurring at 8:05 is considered
to have occurred at 8 and an event occurring at 8:08 is
considered to have occurred at 8:10.
Select the item which you intend to use, and then set Unit
and Point.
7 Rounding Punch in: You can set the rounding rule to process the
registered time when an attendance event is registered
▪ earlier/later than the set start time.
Punch out: You can set the rounding rule to process the
registered time when a leave event is registered
▪ earlier/later than the set end time.
Note
Rounding applies in preference
▪ to Grace.
When Break by Punch is used, break/break end should
be registered on the time & attendance registration device
8 Break by Punch
when a user takes a break during working hours.
When Break by Punch is activated, Max. allowed break
time can be set.
3. To save settings, click Apply. To add a schedule template, click Apply &
Add Schedule Template.
Adding Schedule
You can create a service schedule by assigning the set schedule template,
overtime service rule, period, and holiday to a user.
You can also add a temporary schedule or personal vacation to the created service
schedule.
Note
4 Schedule Template
If there is no desired schedule template, set one by
referring to the Schedule Template.
▪ Once schedule template is set, it cannot be changed.
Set the period to collect T&A events.
Note
5 Period Once the start date is set, it cannot be changed. The
end date can be changed, and when it is changed to a
date which is earlier than the set date, leave events
for the changed period will be deleted.
Select the set vacation schedule. If you do not wish
use it, set None.
6 Holiday Note
If there is no desired vacation schedule, add a
▪ vacation schedule by referring to the Schedule.
7 User Add a user to apply the rule.