Professional Documents
Culture Documents
CX-U Series Data Sheet
CX-U Series Data Sheet
CX-U Series Data Sheet
CX-U Series
Reducing MNOs transmission costs
OPERATOR BENEFITS:
Memotec’s CX-U Series is a cellular backhaul Reduced OPEX / Minimal CAPEX
platform delivering Radio Access Network Increases backhaul capacity without
added transmission resources
(RAN) Bandwidth Optimization and A/E Voice Reduces transmission capacity
Trunk Compression. The CX-U expands cellular requirement in proportion to the
effective traffic usage
transmission network capacity, enabling new Rapid ROI—often in only a few months
services and additional subscribers now, without
Significant Bandwidth Savings
costly upgrades. The CX-U series support GSM GSM Base Station Abis/Ater traffic:
2G/2.5G (Abis, Ater, A/E, Gb/Gn), 3G (UMTS/W- Minimum 50% bandwidth savings
CDMA), TDM, Pseudowire, Ethernet, IP/MLPPP and Cell site aggregation:
Up to 3:1 backhaul capacity reduction
PSTN voice trunk interfaces. It is suitable for GSM, Voice Trunk Compression: 16:1 to 20:1
CDMA, TDMA and AMPS networks, including bandwidth reduction
2:1 or 3:1
bandwidth
reduction
BSC
A.bis
Single E1
CX-U1240 Leased Line CX-U1240
DCME Voice Compression
A reliable, cost-effective and
efficient means of increasing the
capacity of operator’s transmission
Traffic: INTERNET links without sacrificing service
Voice quality.
GPRS
SIG With its advanced GSM AMR voice
PSTN
codec, Memotec’s DCME solution is
SGSN ideal to relieve network congestion,
Gb
leased or microwave while preserving
voice quality. Particularly efficient for
TDM telephony, it is a must have on any
BSC A MSC
satellite link and offers a cost effective
CX-U1280 CX-U1280 solution for disaster recovery. Memotec
DCME solution also enhances the
compression efficiency of media
gateway trunks. Improved service
reliability is designed to offer 100%
service availability.
Satellite Backhaul CX-U Series Benefits:
• Increased compression ratio up to
16:1 on cellular voice trunks
The satellite transponder is dimentioned for real traffic (including Media Gateway); 20:1
carried by the RAN instead of the individual BTS radio capacity.
for telephony
• Superior carrier-grade voice quality
• Lower cost and reduced footprint
Outbound Multiple returns • Data services handling and interfaces
SCPC to the NGN/3G soft switch network
model
• Fail-safe continuous operation,
including hot swappable
A.bis E1 sub-systems, complete system
1+1 redundancy, housed in
BSC
a NEBS compliant chassis.
CX-U1280
CX-U1010 DCME Features
- Support G.729 ab, G.723.1 and AMR codecs
with variable coding rate
- Silence suppression and DSI
Jointly developed with parent backhaul, making it the system- - T.30 FAX relay (V29/V27ter/V17)
company Comtech EF Data of-choice for your satellite based - Modem relay (V32/V32bis/V22/V22bis)
solutions. As well, the CX-U enables - SS7 signaling transport with optimization
(CEFD), Memotec’s satellite (FISU spoofing)
backhaul solution is un-rivaled you to deploy 2.5G EDGE data services - CCS signaling transport
for backhauling cellular base over existing transmission links with - Transcoder free operation (end-to-end
station traffic over satellite links. minimal or no increase to OPEX and one hope compression)
- Multi-clique, multi-bearer operation
Compared favorably against generating a quick ROI.
- End-to-end continuity tone check, detection
traditional microwave or leased Memotec and CEFD are the undisputed and regeneration
lines terrestrial technologies, leaders in cellular (GSM and CDMA) - Voice channels usage real-time monitoring
Memotec’s solution ties satellite backhaul.
transponder capacity to the
effective traffic usage instead of Satellite Backhaul Features
the deployed base station radio - Point-to-Point and Point-to-Multipoint
backhaul
capacity (TRXs). - Single Carrier / Multiple Carriers operation
Whether your application is an - Support IP, Frame-Relay or TDM VSAT
networks
individual remote cell site or cell - SCPC and TDMA/DAMA IP modem
cluster, a low density rural area, technology
or a challenging remote region, the
CX-U offers embedded features for
supporting satellite 2G/3G GSM
Product Specifications About Memotec
Interfaces - Digital T1/E1: unframed, fractional, channelized, voice, data, TDM Memotec is an innovative supplier
- T1 line type: ANSI T1.403 (PRI), AT&T TR62411 (D4), and TR 54016 (ESF), of optimization solutions
Telcordia GR-499-CORE
- T1 encoding: JBZS (AT&T), AMI, B8ZS for cellular backhaul and GSM/
- E1 line type : CEPT (PRI), G.703/G.704 with or without CRC4 & MF CDMA networks. Its flagship
- E1 encoding: HDB3, AMI product, the CX Series, enables
- T1/E1 interface choice of:
- Balanced 120 Ohms: RJ21 “Centronics” operators to dramatically reduce
and RJ-48 individual connectors
- Unbalanced 75 Ohm: BT43 or 1.0/2.3 Mini Siemens connector
network operating expenses
- NFAS, AIS and RDI bits/alarm relay by cutting transmission costs
- Serial interface: EIA-530/V35 (DB25) up to 8 Mb/s and expanding existing
- Ethernet: 10/100 Mb/s, RJ 45 infrastructure capacity from
- RS232 Serial craft interface
the RAN (BTS/Abis links) to the
Standards - T1/E1 Interface: ITU-T G.703, G.704, G.706, G.732, G.733, G.823, G.824 public switched network interface
- Echo: ITU-T G.168
- Voice: ITU-T G.711, G.723.1, G.729 a+b
(PSTN-MSC-BSC, A/E links).
- Ethernet Interface: IEEE 802.1, 802.3, 802.3u Memotec’s CX-U Series leverages the
Capacity CX-U1010 CX-U1220 CX-U1240 CX-U1280 satellite modem expertise of parent
T1/E1 4 12 12 12 company Comtech EF Data, offering
Bearer up to 2 up to 4 up to 4 up to 4
User Trunks up to 4 2 to 12 4 to 12 8 to 12 GSM operators a cost-effective,
Abis TRXs (Xpress)* up to 60 up to 180 up to 180 up to 180 yet proven solution for deploying
Abis TRXs (EdgePlus)** up to 60 up to 90 up to 120 up to 180
Voice Channels (DCME) up to 120 up to 180 up to 240 up to 360 profitable voice & data services in
Serial 1 1 1 1 rural, low density or geographically
Ethernet 4+1 4+1 4+1 4+1
On-board DSP 1 2 4 8
challenging areas.
- Each model has 2 expansion slots that can be fitted with DLP or DDLP modules. Each module With hundreds of deployed and
can support up to 4 E1 depending on application
(* Xpress) Recommended for terrestrial application to minimize end-to-end delay. operational cellular sites across both
(** EdgePlus) Recommended for satellite application to increase bandwidth optimization
satellite and terrestrial transport
Management - Centralized EMS with GUI, interactive help networks in Latin America, the Middle
and CLI ASCII script file generation East, Africa and Asia, Memotec’s
- Open standard SNMP, MIB based NMS platform
- CLI interface (local or Telnet remote access) solutions are proven globally.
- SNMP based Open EMS (Configuration & Software management),
alarm and performance monitoring
- Abis and Voice interface detailed alarm and performance monitoring
with KPI (CXMON)
- Secured in-band node management (IP based) Legal Note
- T1/E1 alarms: red, yellow, near/far end LOS, AIS, LOF, LOMF, test, loop Memotec is a trademark of Memotec Inc.
All information is proprietary to Memotec Inc.
Synchronization - ETSI PDH ITU-T G.823/G.824/G.825 and is subject to change without notice.
and ETSI SDH SEC / ITU-T G.813 clock synchronization compliant
For current information about Memotec’s CX-U Series
- 10MHz, 2.048 MHz, 1.544 Mbps (BITS), and 2.048 Mbps G.703
external clock reference input (BNC 75 Ohm connector) and its product specifications, contact us at COE@
- 2.048 MHz, 1.544 Mbps (BITS), and 2.048 Mbps G.703 clock memotec.com. Memotec Inc. is a wholly owned
reference output (BNC 75 Ohm connector) subsidiary of Comtech EF Data Corp. and its parent
- Better than Stratum 3 TCXO local clock reference (250ppb 24 hours holdover company Comtech Telecommunications Corp.
over temperature range) (NASDAQ: CMTL).
- Optional embedded GPS clock reference
COE@memotec.com
1209