Professional Documents
Culture Documents
Nozzle Loading - EIL
Nozzle Loading - EIL
ALLOWABLE A307-0IG-16-46-ST-0038
PIPING LOADS Rev. 0
Page 2 of 5
NOTES:
1.1 Each process nozzle of equipment shall be analysed for the loads provided in this
standard.
1.2 These loads shall be considered to be acting simultaneously with internal/external design
pressure. Allowable stress shall be as per applicable Design code.
1.3 Stress calculations shall be carried out as per WRC Bulletin No. 107/297. WRC 107 shall
be used for Nozzles on Dished ends and WRC 297 shall be used for Nozzles on
Cylindrical Shell.
1.4 In case of failure due to WRC, FEM analysis/PD 5500 analysis can be carried out to
establish the adequacy of provided configuration.
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
Page 206 of 291
DOCUMENT No.
ALLOWABLE A307-0IG-16-46-ST-0038
PIPING LOADS Rev. 0
Page 3 of 5
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
Page 207 of 291
DOCUMENT No.
ALLOWABLE A307-0IG-16-46-ST-0038
PIPING LOADS Rev. 0
Page 4 of 5
NOZZLE SIZE FA FL FC MT ML MC
(NB)
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
Page 208 of 291
DOCUMENT No.
ALLOWABLE A307-0IG-16-46-ST-0038
PIPING LOADS Rev. 0
Page 5 of 5
ALL CLASSES
NOZZLE FA FL FC MT ML MC
SIZE (NB)
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
Page 209 of 291
DOCUMENT No.
MECHANICAL DATA SHEET
FOR A307-0IG-16-46-DS-4105
SILENCER Rev. A
Page 1 of 3
DATA SHEET
FOR
SILENCER
(IG-LZ-105)
Format No. EIL 1641-1924 Rev. 1 Copyright EIL – All rights reserved
Page 210 of 291