=
Komatsu Hydraulic Oil (HO5S6-HE)
Multi grade hydraulic oil HOS6-HE has been formulated to keep high
components in Komatsu Machines.
efficiency on the hydrauli
Applications
Al Komatsu machines asking for
products meeting KES 07.841.1
Performance Features
elmproved High pressure Hydraulic
components Protection
Komatsu KOMHYDRO MV Hydraulic Oil
has been formulated to keep the Komatsu
‘machines in the best condition.
elmprove efficiency for piston
pump and motor and hydraulic
circuit.
The oil viscosity at high temperature
bring out high efficiency , and the
oil viscosity at low temperature
reduce hyd, circuit fluid resistance.
Performance Specifications
KESO7.841.1
Health & Safety
‘Guidance on Health and Safety are available
‘on the appropriate Komatsu product Material
Safety Data Sheet,
Protect the environment
‘Take used oil to an authorized collection point.
Do not discharge into drains, soil or water.
‘Typical Physical Characteristics
Komatsu Genuine High effosincy
Hydrauile Oil HOS6-HE
[SAE Viscosity Grade ‘ew30
Low temperature [4200 (-30"0)]
Viscosity
Jess Viscosity moa.e
kinematic Viscosity
J@so' mats 583
J@too% mmats 119
Viscosity index 205
|(asTM 02270)
Total Acd Number 4
ImakoHva
[Cotor 25
(ASTM 01500)
[Density @ 15°C 083
gems
[Flash Point (COC)
Jc (ASTM D99) 262
[Pour Point
to casTM D97) 45
High Pressure Piston
[Pump Test pass,
‘These charectenistcs are typical of
Current production
KOMATSUL&
STS
a
Axle oil (AXO80)
Komatsu genuine Axle Oil (AXO80) has been formulated as lubricating
Oil for wheel loader axles and articulate dump truck axles.
‘Typical Physical Characteristics
Applications .
‘AulKomateu whoo! Loaders and [Komateu Genuine Axle Oil
articulate dump trucks asking for ‘Ax080
products meeting KES 07.866 SAE Viscosity Grade | _5W30
Performance Features po viocsity
Specie! high pert 1 [20° mPa-sicP) | Below 4000
Special high performance oi 20% mPa: [Betow 60000]
developed for axle units with lastu Den ad
integrated brake system. Kinematic ncoahy
‘There stall be no noise and seizure ofthe wet |@4o° mmaie sr0
type breke and limited slip diferential (LSD) l@too%e male 9s
inte afore oadersand arcu gary pan
Viscosity index 154
‘elmproved compatibility to bevel last 02270)
gear unit. [Color 55
astm 01500)
Te sp evel gar sald to om Donal G15 aaa
ler
Performance Specifications [Flash Pomeo(coo) | 210
KESO7 886 astm ps2)
Health & Safety [Pour Point °6 Below 40
Guidance on Health and Safety are available —_|(ASTM097)
on the appropriate Komatsu Safety Data [Coefficient of fiction
Sheet. Micro-cluch test pass
Protect the environment KES 07-802
‘Take used alto an authorized collection point. “These charactorsts are ypicl of
Do not discharge into drains, soll or water. Curent producton.
KOMATSUKomatsu Supercoolant AF-NAC 50/50
Komatsu Genuine Supercoolant AF-NAC 50/50 is 50 vol% solution which
keep high efficiency for the cooling components on Construction machines.
‘Typical Physical Characteristics
Applications [Komatsu Genuine Supercoolant
Al Komatsu machines asking for |aF-NAC 50/50 Pre-Diluted
products meeting
[Density @anre 782
Performance & Features
Excellent rust prevention, Anti IGator Blue clear
corrosion and long life.
Komatsu genuine coolant contains highly
hheat-tolerantlonguife additive to achieve Freezing point
longstanding rust prevention and ant s0voI% Solution 312
corrosion , and can prevent corrosion any ‘0voI% Solution 157
kind of trouble in the cooling system. a
‘High performance to prevent sore Soames Ls
‘cavitation - [Bolling Point
With special additives blended in, Lmscrmited solution Hes}
this coolant suppresses cavitation [Cavitation Test
damage to engine cylinder liner , in ‘Cost iron (F120) Pass
addition , it extends the life of each Auumimum (Ac4A) | _ Pass.
cooling system component on heavy Corrosion test
duty construction machines [Mass Change mglem2 | Auminum-0.0|
Performance Specifications Cast ron -0.04|
KESO7.892, ASTM 0.9306 Rust Prevention Test 7
Health & Safety Cast ron
Guidance on Health and Safety are available _[Engine Test
‘on the appropriate Komatsu product Material | pitting Test Pass
cae iene Durability Test Pass
Protect the environment
‘These characteristics are typical of
“Take used coolant to an authorized collection point. [nese haecters
Do not discharge into drains, soll or water.
KOMATSU