Professional Documents
Culture Documents
Folio Installation
Folio Installation
Folio Installation
First we need to install the prerequisite softwares to successfully install Event Plus Folio Plus. To do that
Follow the steps below.
1. . Open the Folio Installer folder, from there you will see the softwares needed to run Event Plus and Folio
Plus
2. Install 1_connector.
c. On Setup Type, If you are using “Deepfreeze”, click on Custom, you need to
change the installation path to another partition which is not protected by
Deepfreeze, for example, Drive D: , IF NOT, just choose Typical then click Next.
To Change the Installation Path do the following
e. Click Finish
MySQL Configuration window will appear after the installation.
a. Click Next
b. Click Next
.
h. Click Execute i. Click Finish
c. Click Install
d. Click Setup to continue e. Then click Install to proceed
Event Plus
a. Double click Event b. Click Next to proceed
e. Click Close.
Folio Plus
a. Double click Folio b. Click Next
c. Do the following.
1. If you are using DeepFreeze, you need to browse for MySQL 2. On “Database For:”, click on the drop
path located on the drive where you install MYSQL, if NOT, you down button then choose Event
don’t have to change the path
3. On Database name:
type the name of your 4. Click Create
database,
for example, academe1
c. Do the following.
1. If you are using DeepFreeze, you need to browse for MySQL 2. On “Database For:”, click on the drop
path located on the drive where you install MYSQL, if NOT, you down button then choose Hotel
don’t have to change the path
3. On Database name:
type the name of your 4. Click Create
database,
for example, academe1
c. Do the following.
1. If you are using DeepFreeze, you need to browse for MySQL 2. On “Database For:”, click on the drop
path located on the drive where you install MYSQL, if NOT, you down button then choose Resto
don’t have to change the path