ee me ae
LYCEUM OF THE PHILIPPINES UNIVERSITY
Cavite Campus
DEPARTMENT OF ENGINEERING
Digital Communications (DICLOIE)
‘Suopect
INDIVIDUAL REPORT
EXPERIMENT NO. _2_
—
| |
| |
LL)
eauing:
Frequency Shift Keying
—_—_
TITLE OF EXPERIMENT
Quirante, Nikki Paul DC.
SUBMITTED BY:
suemittep to: — Engr. teah@. Santos |
DATE SUBMITTED: April it, 20194.
Objectives
* To be able to implement the VCO method of generating
an FSK signal.
* To be able torecover the data by using a filter to pick-
out one of the sinewayes in the FSK signal.
To be able to demodulate the FSK signal using an
ervelope detector.
To be ab/e to familiarize the behavior of the FSKsignal’s
distortion and use a.com parator to restore the data.
Questions
What's the name for the VCO output frequency thot
corresponds with logic-ts in the digital data?
~ The VCO output frequency that corresponds with
logic-ts is called the'mark frequency!
2. What's the name for the VCO output frequency that
corresponds with logic-Os in the digital data?
- The VCO output frequency that corresponds with
logic-Os is called the'space frequency”
5. Based on your observations of the FSK signal, which of
the twois the higher frequency? Explain your answer.
Based on my opservation, the mark frequency is
higher than the space frequency. Also, the mark
frequency is higher than the carrier frequency, which is
higher than the space frequency.
4. Which of the FSK signal's two sinewaves is the filter
letting through?
The filter is picking both frequencies, the markand
space frequencies.MM.
5. What does the filtered FSK signal now look like?
The filtered signal looks like the message but
reversed areal sine wave, However, the tota/ shape is
similar to the original signal.
6 What can be used to cleanup the recovered digital
signal?
A digital comparator could be used to clear-up
recovered signal and make equal to the original signal.
7. How does the comparator turn the slow-rising voltages
of the recovered digital signal into shar p transitions?
This is done by filtering the recovered message
signal and then com paring with the original voltage.
Data and results
Sample Rate: 500.00 kS/s
CHO: RMS:1920V— Freq: /.046kH2 = ~Vp-p:3861V
CHI: RMS: L4/3V Freq: /3.946kHz Vp-p: 4.002V
Sample Rate: 500.00 kS/s
CHO: RMS:/920V Freq: L046 kHz.
CHI: RMS: 4.524V Freq: 963.649Hz.