Professional Documents
Culture Documents
Link Click
Link Click
Offshore exploration and production are fast developing into deeper waters.
The requirements for the mooring of floating units are therefore changing towards
a set of demands that focuses on less weight, higher strength, ultra high holding
power and HSE-friendliness.
A NEW BENCHMARK
STEVPRIS NEW GENERATION
1
1 Fully redesigned anchor head for 2
improved strength and handling.
2 Shackle is protected inside the anchor
head, allowing free pass of the chaser.
3 Wider spread shank and redesigned
geometry for better penetration and
improved strength.
4 Greater stability on stern roller
benefits safety on board.
5 Fluke angle easily adjustable 3
to soil conditions.
6 Larger fluke surface assures
higher holding capacity.
7 Redesigned fluke for better
stability and penetration.
8 Hollow fluke for
4
ballasting
if needed.
8 5
6
7
Easy Handling Uplift Capability
The Stevpris New Generation also features The Stevpris NG can take considerable uplift
specific characteristics to facilitate handling making it suitable for deployment in deep
on the Anchor Handling Vessel as well as water. On a case to case basis uplift is
during installation and retrieval. The shank allowed of 5 degrees in the intact condition
plates were placed wide apart as to assure and 10 degrees in damaged condition.
the anchor arrives correctly at the stern New API recommendations suggest an uplift
roller. The anchor shackle is located between of 20 degrees, proven in tests to be possible
the shank plates as to prevent interference without reduction in holding power.
with the chaser. The fluke/shank angle can
easily be adjusted without welding on deck
to three different positions to accommodate
for different soil conditions.
EASY HANDLING
STEVPRIS INSTALLATION
First Application
The Stevpris New Generation saw its first
applications in the end of 2004 for mooring a
multiple of floating structures in various parts
of the world. The versatility of the anchor in
combination with its truly superior characteristics
will soon make it the new standard for drag
embedment anchors.
Pre-laid Moorings Lease/purchase
MODU operators can significantly reduce Vryhof's anchors can be supplied on a purchase
mob/demob costs by installing the mooring or on a lease/purchase basis. Within a strategic
spread in advance of the rig's arrival. The alliance with major mooring component
MODU can hook-up in only a fraction of the manufacturers, Vryhof can design and supply
time otherwise required to pay out a full spread. complete mooring systems. Leasing a complete
By relocating mooring spreads ahead of and (pre-laid) mooring system could well be a
independently from the rig's movements, the consideration for your next project.
operator can save on expensive operational
days in a drilling program to a considerable
percentage of the overall project costs.
The easy retrieval of the Stevpris New Generation
anchor makes it the preferred anchor for pre-laid
catenary moorings.
PERFORMANCE STATISTICS
in metric tons
rd
ha y
cla
d& m
the equation UHC= A*(W)0.92 with UHC as the an diu
ns e )
Ci nm ud
UH C i y (m
UH cla
ultimate holding capacity in tonnes and A a so
f t
ry
ve
in
parameter depending on soil, anchor and anchor UHC
in meters
clay
edium
. in m
in mrt
drag
clay
hard
nd &
In very soft soils the optimum fluke/shank angle is drag in
mrt . in sa
ay
surface increasing by 1.5 kPa per meter depth or ard cl
and h
sand
tration in
pene
in the equation Su = 4+1.5*z. with Su in kPa and z
being the depth in meters below seabed.
In sand and hard clay the optimal fluke/shank angle The medium clay design line represents soils such
is 32°. The Stevpris NG design line is based on a silica as silt and firm to stiff clays. The fluke/shank angle
sand with a medium density. should be set at 32° for optimal performance.
Since the beginning of exploration of oil & gas offshore the
art of anchoring has taken a dramatic turn. Vryhof Anchors
was one of the pioneers and achieved holding powers up
to 25 times an anchor's own weight. Consequently the
company soon emerged as market leader in anchor design
and manufacturing and with over 7500 units sold, its
anchors are the most applied offshore.
This sets the stage for Vryhof, who under new private
ownership and with a presence in major offshore arena’s
will continue to responsibly introduce quality designs in
pace with industry's requirements; to explore opportunities
to approach clients in an open, sincere, professional manner
and take its world class services well into a new era for the
benefit and satisfaction of its clients.
Vryhof Anchors BV
P.O. Box 109
2900 AC Capelle a/d Yssel
The Netherlands
Phone: +31 10 266 8900
Fax: +31 10 266 8999
E-mail: vryhof@vryhof.com
www.vryhof.com