Professional Documents
Culture Documents
32-06 Lead in - Lead Out
32-06 Lead in - Lead Out
In three related exercises (31-01, 31-02 and 31-03), the subject of plane selection is the focus. The objective is to
understand the differences between planes, particularly when circular interpolation and cutter radius offset are part
of the CNC program.
1. Make a complete program for one toolpath in the direction of A-B-C-D-E-F in YZ plane
2. Make a complete program for one toolpath in the direction of F-E-D-C-B-A in YZ plane
G19 R1.25
R0.3 Z R0.3
0.2419
C D 0.2419
Y
B E
A F
2.5000
2.5000
1.2264
1.2264
1.5207
1.5207
TOOL PROFILE