Professional Documents
Culture Documents
Konzolne Dizalice PDF
Konzolne Dizalice PDF
Konzolne Dizalice PDF
37729
1
Pillar and wall-mounted slewing jib cranes we speak from experience
31454
2
32996 32007 36517
3
Get into the swing...
4
...of higher productivity and quality
33881
5
You cant bridge the gap between problem and solution any better
High lifting capacity and long If required, anchorages and templates All-round service
outreach, a varied range to meet can also be supplied as extras. Our service begins long before you buy
your needs a Demag jib crane with objective advice,
Thanks to the wide range of designs As pillar and wall-mounted slewing jib planning and design. We perform assem-
and sizes, we can adapt our pillar and cranes can be easily assembled with the bly and com-missioning on request.
wall-mounted slewing jib cranes to a help of conventional tools, you can install Our service technicians are available at
wide variety of demands as regards the them yourself without any problems. any time after that.
lifting capacity, slewing range, outreach
and equipment to provide the optimum High reliability and economy
solution even including a crane with Our pillar and wall-mounted slewing
two jibs. We thus offer you exactly what cranes meet the requirements of
you need. DIN 15 018, Lifting Class H 2, Load
Group 3, and comply with European
Simple mounting and installation Machinery Directive 98/37/EEC.
Demag pillar and wall-mounted slewing
jib cranes can be mounted on walls or All components are series-produced
workshop pillars, installed as free-stand- with maximum precision as standardised
ing units or attached to machines and products of outstanding quality.
systems. They are supplied as complete We can thus guarantee you an optimum
units, including the hoist and electrical cost-to-benefit ratio, maximum operating
equipment. reliability and constant availability.
6
Crane selection: the entire range at a glance
S WL
(kg) 2 3 4 5
Outreach (m)*
6 7 8 9 10 Pillar-mounted cranes
80 For use with chain hoists
12 5
16 0 Slewing range 270°/300°
200 Type KBK 100 slewing range = 270°
2 50 Classified to H2B3
3 15 See technical data sheet 201 426 44
40 0
50 0 Type KBK I/II slewing range = 300°
630 Classified to H2B3
80 0 See technical data sheet 201 426 44
1.000 Type GSX slewing range = 270°
1.600 Classified to H2B2
2.000 See technical data sheet 201 957 44
2.500
S WL
(kg) 2 3 4 5
Outreach (m)*
6 7 8 9 10 Pillar-mounted cranes
80 Slewing range n x 360°
12 5
200 Type GSL manual slewing
2 50 Classified to H2B2
40 0 See technical data sheet 201 961 44
50 0
Type ZSL manual slewing
80 0
or with electric slewing drive
1.000
Classified to H2B2
1.600
For use with chain hoist
2.000
See technical data sheet 201 965 44
2.500
3.200 Type ZSD manual slewing
4.000 or with electric slewing drive
5.000 Classified to H2B3
6.300 For use with chain hoist
8.000 See technical data sheet 201 969 44
10.000 Type ZSDS slewing with electrical
*Intermediate lengths are possible
slewing drive
Classified to H2B3
For use with rope hoists
See technical data sheet 201 973 44
S WL
(kg) 2 3 4 5
Outreach (m)*
6 7 8 9 10 Wall-mounted cranes
80 For use with chain hoists
12 5
16 0 Slewing range 180°/270°
200 Type KBK 100 manual slewing
2 50 Slewing range = 270°
3 15 Classified to H2B3
40 0 See technical data sheet 201 427 44
50 0
630 Type KBK I/II manual slewing
80 0 Slewing range = 270°
1.000 Classified to H2B3
1.600 See technical data sheet 201 427 44
2.000
Type GWL manual slewing
2.500
Slewing range = 180°
3.200
Classified to H2B2
4.000 See technical data sheet 201 977 44
5.000
*Intermediate lengths are possible Type ZWL manual slewing
or with electric slewing drive
Slewing range = 180°
Classified to H2B2
See technical data sheet 201 981 44
7
The right solution for every application
*Intermediate lengths are possible Manual slewing For use with chain hoists
Classification to H2B3
*Intermediate lengths are possible Manual slewing For use with chain hoists
Classification to H2B2
*Intermediate lengths are possible Manual slewing For use with chain hoists
Classification to H2B3
*Intermediate lengths are possible Manual slewing For use with chain hoists
Classification to H2B2
8
S WL Outreach (m)* Slewing range Wall-mounted slewing jib crane GWL
(kg) 2 3 4 5 6 7 8 9 10 G WL G SX
80
Pillar-mounted slewing jib crane GSX
12 5
200
2 50
40 0
50 0
180 ° 270°
80 0
10 0 0
16 0 0
2000
2 50 0
*Intermediate lengths are possible Manual slewing For use with chain hoists
Classification to H2B2
*Intermediate lengths are possible Manual or electric slewing For use with chain hoists
Classification to H2B2
*Intermediate lengths are possible Manual or electric slewing For use with chain hoists
Classification to H2B3
*Intermediate lengths are possible Electric slewing For use with rope hoists
Classification to H2B3
9
The stand-alone models:
Pillar-mounted slewing jib cranes SSK-KBK
33879
10
Pillar-mounted slewng jib cranes SSK-KBK
Lifting Outreach Lifting Hook path Jib bottom h e1 Weight
capacity l speed H edge
GH 1) H0
kg m m/min mm mm mm mm kg
2 4/1 10 7
2 6 50 3 0 15 260
80 3 8/2 1880 113
5 14/3.5 3005 3 52 5 46 0 293
2 17 8
3 2 115 2 50 5 3025 395 183
4/1 19 3
4
12 5 8/2 2 83
14/3.5 2625 3005 3 52 5 46 0
5 3 58
6 513
2790 3 180 40 50 59 0
7 543
2 50 5 3025 395 17 8
2
2060 3005 3 52 5 46 0 268
2 50 5 3025 395 183
3 4/1
273
2 50 8/2 2 56 0 3005 3 52 5 46 0
4 14/3.5 333
5 49 3
2735 3 180 59 0
6 40 50 513
7 2 7 40 3 185 6 40 723
2 0 45 2 50 5 3025 47 0 17 8
2
2 545 268
3005 3 52 5 540
2 555 3 13
3 2730 3 180 660 448
4/1
2735 3 185 7 40 628
50 0 8/2
12.5/3.1 2730 3 180 40 50 660 46 8
4
2735 3 185 7 40 6 48
2730 3 180 660 49 3
5
673
2735 3 185 40 55 7 40
6 693
4/1 2665 3 180 40 50 660 453
3
8/2 633
10 0 0
4 9/2.2 2670 3 185 40 55 7 40 6 58
5 12.5/3.1 708
1) With two-fall chain hoist
11
The outstanding models:
Wall-mounted slewing jib cranes WSK-KBK
36139
12
Wall-mounted slewing jib cranes WSK-KBK
Lifting Outreach Lifting b Weight
capacity l speed
GH
kg m m/min mm kg
2 4/1 38
50 0
80 3 8/2 44
5 14/3.5 660 110
2 88
3 93
4/1 660
4 10 3
12 5 8/2
5 14/3.5 17 8
6 2 18
10 2 0
7 2 48
2 88
3 660 93
4/1
4 153
2 50 8/2
5 14/3.5 19 8
6 10 2 0 2 18
7 2 48
2 670 88
3 4/1 660 13 3
50 0 4 8/2 17 3
5 12.5/3.1 10 2 0 19 8
6 2 18
3 4/1 158
10 0 0 4 9/2.2 10 3 5 183
5 12.5 233
13
Up to the last centimetre:
KBK low-headroom slewing jib cranes
36572
14
Low-headroom KBK pillar-mounted slewing jib cranes
Lifting Outreach
capacity l
GH
kg mm
3.460
80
3.860
2.760
12 5
3.060
1.960
2 50
2.260
1.260
50 0
1.560
80 3.860
12 5 3.060
2 50 2.260
50 0 1.560
15
Twice the benefit:
KBK pillar-mounted slewing jib cranes with two jibs
16 36517
1. Jibs arranged opposite each other 3. Pillar-mounted slewing jib crane with
bracket for wall-mounted slewing jib crane;
jibs arranged opposite each other, one
above the other
2. Jibs arranged next to each other 4. Jibs arranged one above the other
0°
17
Ideal for low headroom:
Slewing jib cranes GSX and GWL
Pillar-mounted slewing jib cranes GSX The slewing range of the pillar-mounted
and wall-mounted slewing jib cranes slewing jib crane GSX is 270°, that of the
GWL provide maximum hook paths wall-mounted slewing jib crane GWL 180°.
wherever only low headroom dimensions
Pillar-mounted slewing jib cranes GSX
are available. They are fitted with low-
and wall-mounted slewing jib cranes GWL
headroom T beams as trolley runways
are classified in H2B2 to DIN 15 018.
and feature a light-weight design.
Following steel shot blasting to DIN 55 928,
Our wall-mounted slewing jib cranes a 2K single coat of chrome yellow paint
are used if sufficiently dimensioned (RAL 1007) is applied. The electrical equip-
reinforced concrete walls or pillars are ment included in the supply is complete,
available. The crane hook path can be the mains power switch can be locked.
determined according to the installation
The scope of supply includes the manufac-
height. They can be easily fitted using
turers or conformity declaration as well as
through bolts and counterpart plates or
a test and inspection booklet. If required,
clamping arrangements (not included
we can supply anchor bolts and a template
in the scope of supply, agree mounting
in advance.
arrangement with structural engineer).
18
Pillar-mounted slewing jib crane GSX Wall-mounted slewing jib crane GWL
Lifting Outreach Lifting Chain hoist + Hook path Height Bottom edge Crane Height Height Crane
capacity speed push travel trolley H h of j i b weight h b weight
GH I or standard HO * *
kg m m/min type height mm mm mm approx. kg mm mm approx. kg
2 2.680 12 0 40
3 140 660 236 50
RU DKUN 1-100 2.145 2.700
4 16 0 70
80 8/2 KV1 F4 1/1 2.500
5 15,5 kg 2.720 220 276 10 0
80 0
6 2.760 2 80 3 16 150
2.135
7 2.770 3 10 900 3 41 200
2 2.680 12 0 40
660 236
3 2.145 2.700 140 50
4 RU DKUN 1-125 2.720 200 276 80
12 5 8/2 KV1 F4 1/1 2.500 80 0
5 15,5 kg 2.760 260 3 16 13 0
6 2.135 2.750 320 321 150
900
7 2.790 390 3 41 200
2 2.680 12 0 660 236 40
3 2.085 2.700 17 0 80 0 276 70
4 RU DKUN 1-100 2.730 260 301 10 0
200 4/1 KV1 F4 2/1 2.500
5 16,5 kg 2.770 3 10 900 321 13 0
6 2.080 390 3 41 17 0
2.810
7 50 0 1.115 416 230
2 2.680 12 0 660 236 40
2.085
3 2.720 180 80 0 296 80
4 RU DKUN 1-125 2.750 270 321 110
2 50 4/1 KV1 F4 2/1 2.500 900
5 16,5 kg 330 3 41 150
2.080 2.790
6 440 416 230
1.115
7 2.840 540 43 6 300
2 2.060 2.700 16 0 80 0 276 50
3 2.750 2 50 321 90
RU DKUN 2-200 900
4 2.790 300 3 41 12 0
40 0 4/1 KV1 F4 2/1 2.500
5 30 kg 2.065 2.810 43 0 416 200
6 2.840 50 0 1.115 43 6 260
7 2.900 6 40 46 6 330
2 2.720 16 0 80 0 296 60
3 2.750 2 50 900 321 90
4 RU DKUN 2-250 2.790 3 80 416 180
50 0 4/1 KV1 F4 2/1 2.055 2.500
5 30 kg 2.840 46 0 1.115 43 6 230
6 2.900 580 46 6 300
7 2.880 730 1.215 47 0 330
2 2.770 2 10 900 321 70
3 2.790 3 10 416 150
RU DKUN 2-400 1.115
4 2.840 330 43 6 200
80 0 4/1 KV1 F4 2/1 2.050 2.500
5 32 kg 2.850 50 0 47 0 260
6 2.910 56 0 1.215 50 0 330
7 2.940 600 53 0 43 0
2 2.770 3 10 396 110
3 RU DKUN 5-500 2.810 370 1.115 43 6 16 0
1.000 4 4/1 KV1 F4 2/1 2.000 2.870 2.500 450 46 6 220
5 45 kg 2.940 730 50 0 290
1.215
6 2.980 850 53 0 3 80
2 2.810 330 1.115 416 12 0
3 EU DKUN 10-800 2.850 53 0 47 0 180
1.600 4.5/1.1 KV1 F4 2/1 2.005 2.500
4 70 kg 2.910 630 1.215 50 0 2 40
5 2.940 730 56 0 370
2 EU DKUN 10-1000 2.810 330 1.115 43 6 13 0
2.000 3 4.5/1.1 KV1 F4 2/1 1.885 2.880 2.500 550 50 0 200
70 kg 1.215
4 2.910 630 53 0 270
2 EU DKUN 10-1250 2.850 49 0 47 0 140
2.500 4.5/1.1 1.885 2.500 1.215
3 KV1 F4 2/1 79 kg 2.910 580 53 0 220
* The crane weight is determined from the pillar/bracket and jib.
19
All-round activity:
Pillar-mounted slewing jib cranes GSL
37684-4
Where no walls, pillars or similar obstacles bearings guarantee convenient operation The electrical equipment included in
obstruct movement of the jib, pillar- and maximum operating reliability. the supply is complete, the mains power
mounted slewing jib cranes GSL offer a switch can be locked.
decisive advantage: they have a slewing Pillar-mounted slewing jib cranes GSL
range of n x 360°. are classified in H2B2 to DIN 15 018. The scope of supply includes the manu-
Following steel shot blasting to facturers or conformity declaration as
Depending on the length of the jib, an DIN 55 928, a 2K single coat of chrome well as a test and inspection booklet.
area of approx. 150 m2 can be served. yellow paint (RAL 1007) is applied. If required, we can supply anchor bolts
The compact slewing head with a slip Access from above makes it possible and a template in advance.
ring, lift-off prevention and anti-friction to install the crane quickly and easily.
20
Pillar-mounted slewing jib crane GSL
Lifting Outreach Lifting Chain hoist + Hook path Height Bottom edge Crane
capacity speed push travel trolley H h of j i b weight
GH I HO
kg m m/min type mm mm mm approx. kg
2 10 0
2.660
3 10 6
4 RU DKUN 1-100 17 0
80 8/2 2.145 2.700 2.500
5 KV1 F4 1/1 2 40
6 2.740 300
7 2.720 370
2 2.660 10 0
3 2.145 150
2.700
4 RU DKUN 1-125 220
12 5 8/2 2.500
5 KV1 F4 1/1 2.760 290
6 2.135 2.740 370
7 2.780 46 0
2 2.680 13 0
3 2.085 2.700 200
4 RU DKUN 1-100 2.720 3 10
200 4/1 2.500
5 KV1 F4 2/1 2.760 370
6 2.080 46 0
2.810
7 57 0
2 2.700 140
3 2.085 2 10
RU DKUN 1-125 2.720
2 50 4 4/1 2.500 3 10
KV1 F4 2/1
5 42 0
2.080 2.810
6 50 0
2 2.700 180
2.060
3 RU DKUN 2-200 2.720 2 80
40 0 4/1 2.500
4 KV1 F4 2/1 410
2.080 2.760
5 49 0
2 2.720 19 0
RU DKUN 2-250
50 0 3 4/1 2.080 2.740 2.500 300
KV1 F4 2/1
4 2.810 42 0
2 RU DKUN 2-400 2.740 270
80 0 4/1 2.050 2.500
3 KV1 F4 2/1 2.810 390
RU DKUN 5-500
1.000 2 4/1 2.000 2.760 2.500 2 80
KV1 F4 2/1
21
Ideal with electric drives:
Pillar-mounted slewing jib cranes ZSL,
wall-mounted slewing jib cranes ZWL
33003
With the optional electric slewing and The pillar-mounted slewing jib crane ZSL The scope of supply includes the manu-
trolley travel drives, pillar-mounted has a slewing range of n x 360°, the facturers or conformity declaration as
slewing jib cranes ZSL and wall-mounted wall-mounted slewing jib crane ZWL well as a test and inspection booklet.
slewing jib cranes ZWL provide ideal features a slewing range of 180°. If required, we can supply anchor bolts
working conditions above all for higher and a template in advance.
lifting capacities and longer outreach With their anti-friction bearings, ZSL and
dimensions. If the work requires the ZWL guarantee convenient operation and
jib to be moved frequently, while the maximum operating reliability. They are
trolley remains close to the pivot point, easy to install.
a slewing drive is virtually indispensable.
Pillar-mounted slewing jib cranes ZSL
and wall-mounted slewing jib cranes ZWL
are classified in H2B2 to DIN 15 018.
Following steel shot blasting to DIN 55 928,
a 2K single coat of chrome yellow paint
(RAL 1007) is applied. The electrical
equipment included in the supply is
complete, the mains power switch can be
locked.
22
Pillar-mounted slewing jib crane ZSL Wall-mounted slewing jib crane ZWL
Lifting Outreach Lifting Chain hoist + Hook path Height Bottom edge Crane weight Height Height Crane
capacity I speed push travel trolley H h of j i b * h b weight
GH HO *
kg m m/min type mm mm mm approx. kg mm mm approx. kg
2 3 50 12 4
3.220 370
3 370 150
4 RU DKUN 2-250 3.260 42 0 410 200
50 0 4/1 2.555 3.000 1.300
5 KV1 F4 2/1 3.310 50 0 43 0 2 50
6 3.370 620 46 0 2 40
7 3.340 770 49 0 40 0
2 3.220 3 50 370 13 0
3 3.240 3 80 410 17 0
1.300
4 RU DKUN 2-400 3.340 49 0 43 0 220
80 0 4/1 2.550 3.000
5 KV1 F4 2/1 3.310 6 50 46 0 2 80
6 3.370 770 49 0 360
1.600
7 3.440 9 40 52 0 450
2 3.220 3 50 390 13 0
3 3.260 40 0 1.300 43 0 19 0
4 RU DKUN 5-500 3.370 52 0 46 0 2 40
1.000 4/1 2.500 3.000
5 KV1 F4 2/1 3.340 6 80 49 0 3 10
1.600
6 810 52 0 40 0
3.400
7 1.020 2.100 550 510
2 3.260 370 43 0
1.300 200
3 3.280 550 46 0
EU DKUN 10-800
1.600 4 4.5/1.1 2.385 3.370 3.000 660 52 0 300
KV1 F4 2/1 1.600
5 80 0 550 390
3.440
6 1.020 2.100 59 0 510
2 3.280 3 80 1.300 43 0 150
3 3.310 57 0 1.600 49 0 220
EU DKUN 10-1000
2.000 4 4.5/1.1 2.385 3.400 3.000 690 52 0 300
KV1 F4 2/1
5 3.440 9 50 2.100 550 390
6 3.490 1.100 59 0 510
2 3.280 52 0 46 0 16 0
1.600
3 EU DKUN 10-1250 3.340 59 0 52 0 2 50
2.500 4.5/1.1 2.385 3.000
4 KV1 F4 2/1 3.400 850 550 3 40
2.100
5 3.490 1.020 59 0 450
2 3.310 53 0 1.600 49 0 180
EU DKUN 20-1600
3.200 3 4/1 2.190 3.340 3.000 7 40 550 2 80
KV1 F4 2/1 2.100
4 3.440 89 0 59 0 3 80
* The crane weight is determined from the pillar/bracket and j i b.
23
Take the right turn:
Pillar-mounted slewing jib cranes ZSD
24
Pillar-mounted slewing jib crane ZSD
Lifting Outreach Lifting Chain hoist + Hook path Height Bottom edge Crane
capacity I speed push travel trolley H h of j i b weight
GH HO
kg m m/min type mm mm mm approx. kg
2 370
3.260
3 390
4 3.280 440
5 53 0
RU DKUN 2-250 3.340
50 0 6 4/1 2.555 3.000 720
KV1 F4 2/1
7 3.370 82 0
8 3.400 1.080
9 3.440 1.220
10 3.490 1.420
2 370
3.260
3 40 0
4 3.310 6 10
5 3.340 6 80
RU DKUN 2-400
80 0 6 4/1 2.550 3.000 810
KV1 F4 2/1 3.400
7 1.020
8 3.440 1.160
9 3.490 1.340
10 3.540 1.800
2 3.260 370
3 43 0
3.310
4 6 10
5 3.370 7 10
RU DKUN 5-500
1.000 6 4/1 2.500 3.400 3.000 970
KV1 F4 2/1
7 3.440 1.100
8 1.260
3.490
9 1.580
10 3.590 1.960
2 3.280 3 80
3 3.310 57 0
4 3.400 690
5 9 50
EU DKUN 10-800 3.440
1.600 6 4.5/1.1 2.385 3.000 1.280
KV1 F4 2/1
7 3.490 1.420
8 3.540 1.600
9 3.590 2.080
10 3.640 2.390
2 3.310 53 0
3 3.340 59 0
4 3.370 810
5 EU DKUN 10-1000 3.440 9 50
2.000 4.5/1.1 2.385 3.000
6 KV1 F4 2/1 3.490 1.340
7 3.540 1.520
8 3.590 1.980
9 3.640 2.240
2 3.280 52 0
3 3.370 760
4 3.440 89 0
EU DKUN 10-1250
2.500 5 4.5/1.1 2.385 3.490 3.000 1.260
KV1 F4 2/1
6 3.540 1.420
7 3.590 1.860
8 3.640 2.100
2 3.340 540
3 3.400 790
4 EU DKUN 20-1600 3.440 1.140
3.200 4/1 2.190 3.000
5 KV1 F4 2/1 3.490 1.260
6 3.540 1.660
7 3.640 2.140
25
For maximum lifting capacities:
Pillar-mounted slewing jib cranes ZSDS
26
Pillar-mounted slewing jib crane ZSDS
Lifting Outreach Lifting Lifting unit Hook path Height Bottom edge Crane
capacity I speed H h of j i b weight
GH HO
kg m m/min type mm mm mm approx. kg
2 3.610 57 0
3 3.670 810
4 3.670 1.120
5 EKDH 166 H12 2.980 3.740 1.260
2.500 5.6/1.4 3.300
6 4/1 KV2 F4 3.840 1.740
7 3.890 1.940
8 3.940 2.380
9 2.940 3.830 3.420
2 3.640 580
3 3.700 83 0
4 3.740 1.180
2.980
5 EKDH 168 H12 3.790 1.580
3.200 4.5/1.1 3.300
6 4/1 KV2 F4 3.840 1.740
7 3.940 2.240
8 3.830 3.280
2.940
9 3.930 3.640
2 3.700 790
3 3.700 1.100
4 3.790 1.260
5 EKDH 210 H16 3.840 1.660
4.000 5.6/1.4 2.920 3.300
6 4/1 KV2 F4 3.890 2.040
7 3.830 3.140
8 3.880 3.400
9 3.930 4.040
2 3.740 1.060
3 3.790 1.180
4 3.840 1.580
5 EKDH 212 H16 3.940 2.020
5.000 4.5/1.1 2.920 3.300
6 4/1 KV2 F4 3.830 3.000
7 3.880 3.240
8 3.930 3.860
9 3.980 4.160
2 3.790 1.080
2.780
3 3.790 1.440
4 EKDH 316 H12 3.890 1.820
6.300 3.1/0.5 3.300
5 4/1 KV1 F6 3.780 2.740
2.715
6 3.830 3.340
7 3.880 3.580
2 3.730 1.460
3 3.830 1.700
EKDH 320 H12
8.000 4 3.1/0.5 2.715 3.730 3.300 2.540
4/1 KV2 F6
5 3.780 3.100
6 3.880 3.400
2 3.730 2.280
3 EKDH 425 H12 3.780 2.460
10.000 4/0.6 2.630 3.300
4 4/1 KV3 F6 3.830 3.020
5 3.830 3.180
27
Fax service The first step towards your
(01295)271408 slewing jib crane
Contact
Telephone / Extension
Telefax
Data Data
on the planned wall-mounted slewing jib crane type on the planned wall-mounted slewing jib crane type
Weight of the goods to be transported GH: kg Weight of the goods to be transported GH: kg
Mounted on: steel pillar Mounting material: Foundation: with anchor bolts
reinforced concrete pillar already available
reinforced concrete wall please quote concrete floor with intermediate plate
DK hoist: DK hoist:
37693-8
32282-13
37688-7
37692-1
Not liable for errors or omissions. Subject to change.
30