Professional Documents
Culture Documents
Grundfosliterature 425617 PDF
Grundfosliterature 425617 PDF
Electronic motor
protection for pumps
One unit for all electrical motors,
from 3 – 999 A
be
think
innovate
One motor protection unit for total One control panel for your convenience
system reliability
Developed especially for pumps by Grundfos pump specialists, Additionally the MP 204 is configurable via Grundfos GO. To be Grundfos has put everything together in one straight-forward
the MP 204 motor protection unit brings you motor protection functional it is required to have a MI cradle suitable for your control panel. The main switch and the LED panel showing
that is as reliable as it is simple to use. In effect, we did all the smartphone. Check out our website for more information on power consumption are all you see on the front. Inside you
hard bits for you. The result is a unit that protects your pump 24 Grundfos GO. find the MP 204 unit and optional communication interface
hours a day and in addition lets you monitor your energy con- units, ready to go.
sumption – and never loses sight of user-friendliness. Ensure system reliability
The MP 204 protects pump motors against under-voltage, over-
Easy installation voltage and other variations in power supply, ensuring your
Installing the MP 204 is extremely easy. It can be mounted by pump continues its steady performance. Your pump motors
means of four screws onto any wall or back plate, or simply slid will also be protected against the overheating that accompa-
into place on a mounting rail. nies such variations and reduces pump lifetime. Stay in touch from a distance
With just one product for all situations, you do not need to We believe in open protocols. That is why your MP 204 solu- Connections can be created either via wired networks or wire-
worry about choosing the right motor protection unit for your In addition to the reliability offered by motor protection, MP tion can be connected to any SCADA system, allowing you less technology such as GPRS/GSM networks. If you choose
pump or motor. The MP 204 covers the range from 3 to 999 204 also acts as a monitoring device for energy consumption, remote access to your pump data anywhere. You can control WebAccess via the Grundfos Remote Management system
amps as well as voltages from 100 to 480 VAC and is easily set meaning you can take measures for optimisation. the pump, change the settings, and access information such (GRM), you can communicate via your computer, the Internet,
up in under two minutes. as energy consumption, alarms and operation data. Grundfos or via mobile phones as you choose. One Grundfos GPRS
solutions can communicate with almost all of the communica- modem/data logger is capable of monitoring up to 10 pumps
tion standards available on the market. protected by MP204.
E 48 E 56 E 48A 48
E 56A 56
E 48A 48
E 56A 56 A 48 A 56 E 64 E 71 E 64A 64
E 71A 71
E 64A 64
E 71A 71 A 64 A 71 E 21 E 21 E 21
If the motor current is outside the Monitoring temperature means the Continually checks the motor’s
required values, the motor will stop. motor shuts down before it overheats power consumption and stops the
Protecting against overload/under- and gives you an early warning for pump if the power falls below a cer-
load lengthens the lifetime and servicing. The TempCon temperature tain level. This could indicate a prob-
improves overall system reliability. transmitter works with SP pumps, and lem and prevents the total motor
the Pt sensor or PTC/thermal switch damage that would otherwise occur
with other pump ranges. if the pump runs dry.
Other monitoring parameters include: • Harmonic distortion • Run and start capacitor (single-phase) • Operating hours and number of starts
96592439/1013/WATER UTILITY/10132-D&I
MP 204
The MP 204 is a Grundfos developed motor protection unit for use
with the Grundfos SP, CR, NB/NK, TP, and BM ranges. These high-
quality pumps cover a wide range of pump application options, from
groundwater supply to wastewater handling.
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide.
Additionally since the Grundfos motor protection unit is a standard
motor protection unit it will be working as a great protection solution
for any motor that needs protection.