Professional Documents
Culture Documents
Catalog 100 Control and Load Switches For Higher Capacities: CAD, CA and C Type Up To 315 A L Type Up To 2400 A
Catalog 100 Control and Load Switches For Higher Capacities: CAD, CA and C Type Up To 315 A L Type Up To 2400 A
02/2019
BLUE LINE
Blue Line products are protected by numerous patents through-
out the industrial world. They are built to national and international
standards and designed to withstand adverse temperatures and
climates.
Blue Line products are accepted and universally recognized for their
quality and workmanship. They are supported by a worldwide sales
and service organization.
WORLDWIDE SYMBOL
FOR QUALITY SWITCHGEAR
Disconnectors and Main Switches acc. to IEC 60947-3 see Catalog 500
Contents Page
Construction Data 4
Dimensions and
Nominal Ratings 5
How to order 6, 7
Types of Mounting
Panel Mounting 33-37
Base Mounting 38
Wall Mounting 39
Handles 42
Dimensions
Panel Mounting 49-53
Base Mounting 53, 54
Wall Mounting 55
Overall Switch Lengths 55, 56
The load switches of the C, CA and CAD-series offer a solution for most CA and CAD Switches (CA4-CA25B)
cam switch applications. Different contact designs, contact materials and
terminals allow for their use as control switches, instrumentation switches
and motor control switches, as well as in electronic circuitry and in
aggressive environments according to IEC 60947-3 and
VDE 0660 part 107.
The stage is the basis for all switches and can be supplied with a maxi-
mum of 2 contacts. The terminals are accessible from the side. CA and
CAD switches are supplied with open terminals to facilitate wiring and
are protected against accidental finger contact according to EN 50274,
VDE 0660 part 514 and DGUV V3. Switches up to type CA25B are
supplied with captive screws with clamping plates. The switch types
CA40-CA63 are supplied with box terminals. Captive plus-minus terminal
screws and integrated screwdriver guides facilitate wiring.
If a positive manual operation or a higher DC rating is required, many of
these switches can be fitted with a snap action latching mechanism -
suffix „S“ - to the switch type.
The cam-operated switches of the L-series are continuous current rated CA Switches (CA40-CA63)
for off-load switching. They may be used to switch resistive or low induc-
tive loads.
Four-hole mounting. . . . . . . . . . . . . . . E
Latching mechanism determines or single -hole mounting 22 mm dia. . . FT
the switch positon 20, 30, 45, 60, 90 Degree or base mount. . . . . . . . . . . . . . . . . . . . VE
or DIN rail mounting. . . . . . . . . . . . . . VE1
Frame
Face Plate
Stages
Up to 12
Shaft
4
Nominal Ratings
C26 690 32 15 11
C32 690 50 22 15
C42 690 63 30 18,5
CA40 690 40 18,5 15
CA50 690 50 22 18,5
CA63 690 63 30 18,5
The type of switch required may be The code numbers for standard switches Types of mounting are shown on pages
easily selected by referring to the table shown on pages 8-32 indicate the switch 33-39. Catalog 101 describes enclosu-
on page 5 which shows the thermal function, face plate, handle and any res and optional extras.
current, power rating and dimensions optional extras.
of each switch. For further technical Specify the mounting code to indicate
details, refer to pages 44-47. Variations Additional coding to modify type and required mounting.
of contacts and terminals are shown color of handle and face plate is explai-
below. ned below.
CA10 A202 VE
Type of Switch
Example: Coding for switch type CA10 with gold contacts is CA10-1.
1 2
Technical data on request. Additional length for switches with B, C, S, amendments refer page 54.
6
How to order
When ordering special switches and face plates it is advisable to use our order form, as illustrated. The customer’s requirements
are shown in blue as an example.
For technical reasons, it may not be possible to follow the sequence of contacts requested by the customer. The final contact
development which is sent with every switch will show the customer’s original terminal markings.
MOTOR 1
O
1 2 3 4 5 7 9
H
G001
CA20
R K S
A
O x
M004 /02 1A 0 60
VE
< back to table of contents >
H x x x
x x x x
A x x x
7
8
Notes:
Type/Handle
Escutch. CA4 CAD.. CA40
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C26-
CAD4-1 CA25 CA25B C315
Dimensions p. 56
ON/OFF Switches with 60° Switching
1 pole I I I I A200 1
2 pole I I I I A201 1
3 pole I I I I A202 2
4 pole I I I I A203 2
4 pole 1 pole preclose 6° 1
F070
I I I I WAA653 2
5 pole I I I I WAA341 3
6 pole I I I I A342 3 1-12 pole
7 pole I I I I A343 4
8 pole I I I I A344 4
8 pole 2 pole preclose 6° 1 I I I I WAA654 4
9 pole I I I I WAA345 5
10 pole I I I I A346 5
11 pole I I I K WAA347 6
12 pole I I I K A348 6
4 pole 1 pole preclose 6°
F062
1 pole I WAA100 1
2 pole I WAA101 1
3 pole I WAA102 2 1-4 pole
4 pole F169 I WAA103 2
Type/Handle
Escutch. CA4 CAD.. CA40
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C26-
CAD4-1 CA25 CA25B C315
Dimensions p. 56
Double-throw Switches without „OFF“ 60° Switching
1 pole I I I I A220 1
2 pole I I I I A221 2
3 pole I I I I A222 3
4 pole F072 I I I I A223 4
4 pole 1 pole preclose 6° 2 I I I I WAA673 4 1-4 pole 4 pole 1 pole preclose 6°
5 pole I I I I A369 5
6 pole I I I I A370 6
7 pole I I I I A371 7
8 pole I I I I A372 8
8 pole 2 pole preclose 6° 2 I I I I WAA972 8 5 pole
9 pole I I I I WAA373 9
10 pole I I I WAA374 10
11 pole I I I WAA375 11
12 pole I I I WAA376 12
6 and 7 pole
8 and 9 pole
10 and 11 pole
12 pole
1 pole I I I I A720 1
2 pole I I I I A721 2 1-4 pole
3 pole I I I I A722 3
4 pole F072 I I I I A723 4
4 pole 1 pole preclose 6° 2 I I I I WAA973 4 4 pole 1 pole
preclose 6°
1 pole I WAA120 1
2 pole I WAA121 2
3 pole I WAA122 3
4 pole F026 I WAA123 4
1-4 pole
1 2
not available for switch type CA25 for use in a three phase four-wire system with switched neutral
10
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD..
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C80-
CAD4-1 CA25 CA63 C315
Dimensions p. 56
Double-throw Switches with Center „OFF“ 60° Switching
1 pole I I I I A210 1
2 pole I I I I A211 2
3 pole I I I I A212 3
4 pole F071 I I I I A213 4
4 pole 1 pole preclose 6° 3 I I I I WAA913 4 1-4 pole
5 pole I I I I A361 5
6 pole I I I K A362 6
7 pole I I I K WAA363 7
8 pole I I K K WAA364 8
8 pole 2 pole preclose 6° 3 I I K K WAA664 8
5 pole
< back to table of contents >
6 and 7 pole
8 pole
1 pole I I I I A218 1
2 pole I I I I A219 2
3 pole I I I I11 WAA299 3
4 pole 1 pole preclose 60°3 F057 I I I I WAA294 4 1-4 pole
1 pole I I I I A710 1
2 pole I I I I A711 2 1-4 pole
3 pole I I I I A712 3
4 pole F071 I I I I A713 4
4 pole 1 pole preclose 6° 3 I I I I WAA963 4
4 pole 1 pole
preclose 6°
1 pole with spring return I I I I 2 A714 1
2 pole to center I I I A715 2
1 and 2 pole
F025
1 2 3
switch type C315 with K handle not available for switch type C315 for use in a three phase four-wire system with switched neutral
11
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA40
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C26-
CAD4-1 CA25 CA25B C315
Dimensions p. 56
Double-throw Switches with Spring Return to Center
1-3 pole
1-3 pole
3 pole
3 pole
3 pole
1 2 3
not available for switch type CA25 not available for switch type C315 available only up to switch type CA63
12
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CA10 CA40
Function Code Stages Connection Diagram
Plate CA4-1 CA11 CA10B- C26-
CAD4-1 CA12 CA25B C315
Dimensions p. 56
Coding Switches/Binary Code
0-7 I I A540 2
360° rotation
F322
0 - 7 complement I I WAA541 2
360° rotation
F322
0 - 7 + complement I I WAA542 3
360° rotation
F322
< back to table of contents >
0-9 I I A550 2
F007
0 - 9 complement I I WAA551 2
F007
0 - 9 + complement I I WAA552 4
F007
0 - 11 I I A543 2
360° rotation
F009
0 - 11 + complement I I WAA545 4
360° rotation
F009
13
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD..
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C80-
CAD4-1 CA25 CA63 C315
Dimensions p. 56
Multi-step Switches without „OFF“
3 pole
4- and 5 pole
6 pole
4-6 pole
3 pole
F010
F011
F012
Type/Handle
Escutch. CA4 CAD..
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C80-
CAD4-1 CA25 CA63 C315
Dimensions p. 56
Multi-step Switches without „OFF“ with electrically isolated contacts
F076 1 pole
2 pole I I I I A750 3
2 pole
F077 1 pole
2 pole I I I I A751 4
< back to table of contents >
2 pole
1-6 pole
3 pole
4 pole
5 pole
15
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD..
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C80-
CAD4-1 CA25 CA63 C315
Dimensions p. 56
Multi-step Switches with „OFF“
1-4 pole
1-3 pole
1-3 pole
1 pole 2 pole
F006
F007
F008
16
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B-
CAD4-1 CA25 CAD.. CA25B
Dimensions p. 56
Voltmeter Switches without „OFF“
F792
2 pole I S S S WAA002 1
360° rotation
F170-PRL
F775
I S S S WAA011 2
F212-PRL
17
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B-
CAD4-1 CA25 CAD.. CA25B
Dimensions p. 56
Voltmeter Switches with „OFF“
F779
F782
F786
18
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA10B-
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA63 C43-
CAD4-1 CA25 C32 C125
Dimensions p. 56
Ammeter Switches
F058
F181-PRL
F172-PRL
2 pole I I I WAA037 3
2 current transformers
F057
1
available only up to switch type CA25B
19
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA10B-
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA63- C43-
CAD4-1 CA25 C42 C125
Dimensions p. 56
Ammeter Switches
2 pole I S S1 WAA019 5
3 current transformers
F181-PRL
I I I I A038 5
F059
2 pole I I I I WAA039 6
F060
1
available only up to switch type CA25B
20
Switch Function and Configuration C, CA, CAD Switches
Type/Griff
Type/Handle C26-
Escutch.
Front- CA4 CAD.. C43 Fluch-
Function
Funktion Code Stages
ten
Connection
Anschlussbild
Diagram
schild CA4-1 CA10- CA10B-
Plate CA40-
CAD4-1 CA25 CA25B CA63
Dimensions p. 56
Volt-ammeter Switches
F101
I I I I 1 WAA028 7
F077
3 wire
F174-PRL
Control Switches
F022
F023
F024
F024
1
available only up to switch type CA25B
21
Switch Function and Configuration C, CA, CAD Switches
Type/Handle C26-
Escutch. CA4 CAD.. C43
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- CA40-
CAD4-1 CA25 CA25B CA63
Dimensions p. 56
Control Switches
F144-PRL
F119
F143-PRL
1 2 3
Advise the indicator device, described in Catalog 101, page 9. not available for switch types CA25 and CA25B incl. slip clutch
4
22 available only up to switch type CA40
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA..B
Function Code Stages Connection Diagram
Plate CA4-1 CA10- C26- C43 C80-
CAD4-1 CA25 CA40-CA63 C315
Dimensions p. 56
Motor Reversing Switches
2 pole I I I I A400 2
F071
3 pole I I I I A401 3
F071
2 speed I I I I WAA451 3
2 winding
0-A-B s or d
F073
3 speed I I I K WAA457
2 winding
0-A-B s or d 6
F109
1 2 3
not available for switch type CA25 not available for switch types C26-C43, CA40-CA63 available only up to switch type CA50
23
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA40
Function Code Stages Connection Diagram
Plate CA4-1 CA10- CA10B- C26-
CAD4-1 CA25 CA25B C315
Dimensions p. 56
Motor Control Switches
F073
F072
F105
F073
1
incl. slip clutch
24
Switch Function and Configuration C, CA, CAD Switches
Type/Handle
Escutch. CA4 CAD.. CA..B
Function Code Stages Connection Diagram
Plate CA4-1 CA10- C26-C43 C80-
CAD4-1 CA25 CA40-CA63 C315
Dimensions p. 56
Star-delta Switches
OFF-star-delta I I I I A410 4
F080
Reversing I I I I WAA413 5
F112
F080
F061
Split-phase
F119 Start FLD
1
not available for switch type CA25
25
Switch Function and Configuration L Switches
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
ON/OFF Switches with 60° Switching
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
ON/OFF Switches with 90° Switching
F062
1 pole L600 K WAA290 3
2 pole K WAA291 3
3 pole K WAA292 6
4 pole 1 pole preclose 60° F056 H WAA293 6
1-3 pole 4 pole
F056
F056
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
Double-throw Switches without „OFF“ 60° Switching
F072
F072
F072
F072
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
Double-throw Switches with Center „OFF" 60° Switching
1-4 pole
4 pole F071 H WAA213 12
F071
F071
F071
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
Multi-step Switches single pole without „OFF“
F076
F076
F076
F077
F077
F078
F078
F078
F079
F079
30
Switch Function and Configuration L Switches
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
Multi-step Switches single pole without „OFF“
F079
F110
F110
F110
F111
F111
F111
F010
F010
F010
F011
31
Switch Function and Configuration L Switches
L350 L351
Escutch. Double Connection L630
Function/Type Handle Code Stages L631
Plate Latching Diagram L1000
Dimensions p. 56
Multi-step Switches single pole without „OFF“
F011
F011
F012
F012
F013
F013
F013
32
Mounting CA4, CA4-1, CAD4-1
CA4
Terminals
Two Hole Panel Mount or Mosaic Mount rotated 90°
Code CA4-1
CAD4-1
Panel Mount
Two hole EF
< back to table of contents >
Mosaic Mount
33
Mounting C, CA, CAD, L Switches
C43
CAD.. CA10B- C80- C315
Terminals
Two or Four Hole Panel Mount rotated 90°
Code CA10- CA63 C200-4 L400-
CA25 C42 L350 L2000
Size S2 Size S2
Panel Mount
Four hole, E
Protection IP 40 E-V
Four hole, EF
Protection IP 66/67/69k EF-V
34
Mounting C, CA, CAD Switches
C32
CA10B
CAD.. C42
CA11B
Two or Four Hole Panel Mount Code CA10-
CA20B
CA40 C43
CA25 CA50
CA25B
CA63
Four hole
Protection front IP 40 EC1
rear IP 42
Two hole
Protection front IP 66/69k ED22 CAD..
rear IP 42 CA10-
CA25
35
Mounting C, CA, CAD Switches
CA4 CAD..
Terminals
Single Hole Mount rotated 90°
Code CA4-1 CA10-
CAD4-1 CA25
36
Mounting C, CA, CAD, L Switches
Base Mount
Snap-on for DIN Rail EN 60715, VE1
Protection IP 40
37
Mounting C, CA, CAD, L Switches
CA4 CAD..
Base Mount Code CA4-1 CA10-
CAD4-1 CA25
VE21V CA25
38
Mounting C, CA, CAD Switches
CAD..
Mounting Plates for Plaster Depth Boxes acc. to DIN 49073 and ÖNORM E8608 Code CA10-
CA25
39
Face plates
Square and rectangular face plates are available for each size of switch. The face
plate consists of a frame and a faceplate having the switch positions which is than
embossed with hot-foil backing. The face plate frame is an essential part of the switch
and serves as a bearing surface for the handle. If the switch is to be mounted without
an face plate we would recommend for size S1, S2 and S3 the handle bearing plate
T100-04.
30° switching
F022 F141 F158 F703 F023 F137 F142 F159 F701 F704 F152 F709 F026 F035 F153 F169 F024 F143
F160 F221 F222 F224 F025 F034 F036 F037 F038 F039 F139 F144 F147 F149 F150 F151 F219 F258
F259 F273 F280 F329 F384 F708 F053 F161 F297 F298 F306 F307 F001 F040 F052 F229 F355 F018
F712 F002 F021 F033 F041 F055 F305 F319 F054 F003 F042 F138 F255 F299 F308 F353 F350 F351
F004 F014 F017 F020 F027 F028 F031 F032 F043 F049 F135 F156 F157 F162 F167 F168 F187 F189
F303 F304 F336 F337 F347 F348 F710 F713 F714 F734 F005 F044 F136 F140 F702 F006 F010 F045
F015 F050 F007 F011 F046 F008 F012 F047 F016 F051 F009 F013 F048 F748
45° switching
F747 F295 F742 F743 F215 F216 F738 F744 F746 F792 F793 F107 F109 F114 F115 F212 F213 F214
F217 F267 F289 F330 F375 F376 F383 F408 F409 F410 F411 F412 F413 F426 F427 F430 F729 F752
F775 F776 F777 F778 F779 F780 F781 F796 F797 F798 F105 F108 F112 F113 F117 F118 F293 F429
F739 F741 F419 F789 F790 F791 F794 F795 F110 F106 F116 F294 F317 F414 F415 F416 F417 F418
F782 F783 F784 F785 F786 F787 F788 F799 F111 F210 F211 F284 F285 F296 F322 F727 F740
40
Face plates
60° switching
F070 F087 F088 F089 F133 F197 F198 F232 F243 F247 F263 F268 F310 F311 F323 F328 F352 F367
F379 F380 F470 F754 F072 F163 F164 F192 F193 F196 F230 F231 F234 F244 F257 F262 F264 F282
F288 F291 F313 F382 F441 F705 F721 F722 F750 F757 F758 F075 F076 F098 F220 F223 F356 F357
F377 F723 F071 F073 F080 F081 F085 F086 F090 F091 F092 F093 F094 F104 F194 F235 F237 F239
F240 F241 F249 F260 F269 F274 F281 F290 F292 F312 F314 F315 F316 F324 F331 F344 F354 F358
F359 F364 F370 F371 F373 F381 F385 F442 F444 F469 F732 F735 F759 F077 F100 F101 F102 F309
< back to table of contents >
F342 F343 F361 F362 F363 F365 F366 F078 F191 F325 F326 F720 F074 F082 F096 F097 F195 F724
F256 F079 F083 F084 F095 F099 F185 F190 F199 F233 F236 F238 F242 F283 F725 F730 F731 F736
F737
90° switching
F056 F063 F068 F134 F201 F251 F252 F346 F456 F058 F065 F069 F177 F178 F182 F208 F253 F254
F340 F360 F378 F458 F443 F700 F743 F057 F061 F064 F067 F171 F181 F205 F207 F209 F320 F349
F437 F445 F715 F719 F059 F060 F062 F066 F170 F172 F173 F174 F175 F176 F179 F180 F186 F188
F202 F204 F206 F250 F265 F266 F286 F318 F327 F338 F339 F425 F716 F717 F718 F726 F733 F751
F755 F756
Miscellaneous
F119 F130 F122 F126 F125 F129 F225 F248 F261 F341 F345 F287 F123 F127 F145 F146 F148 F706
F707 F245 F120 F124 F128 F131 F121 F132 F749 F990 F991 F801 F802 F803 F804
F805 F806 F807 F808 F809 F810 F811 F812 F813 F814 F815 F816 F817 F818 F819 F820 F821 F822
INTERRUPTEUR PRINCIPAL INTERRUTTORE GENERALE INTERRUPTOR PRINCIPAL
OUVERTURE EN POSITION 0 APRIRE SOLO CON MANIGLIA SU 0 ABRIR ARMARIO SOLO EN POS. ’’0’’
1 2 3
F823 F824 F825 F826 F827 F828 F829 F830 F831 F832 F833 F834 F835 F837 F838 F839 F840 F841
1
INTERRUPTEUR PRINCIPAL, OUVERTURE EN POSITION 0 2INTERRUTTORE GENERALE, APRIRE SOLO CON MANIGLIA SU 0
3
INTERRUPTOR PRINCIPAL, ABRIR ARMARIO SOLO EN POS. ’’0’’ 41
Handles
S00 S0-S3
—
F-Handle black G221 B-Handle black G521 — — —
—
red G222 red G522 — — —
S0 S1
S0 S1-S3
42
International Standards and Approvals
1
USA Underwriters
Laboratories Inc.
2
3
6
Canada UL investigated
acc. to CSA
1
C
2
3
C
Switzerland Schweizerischer + + + + + + + + + +
Elektrotechnischer + + + + + + + + + + +
Verein + + + + + + + + + + +
Denmark Danmarks Elektriske + + + + + + + + + +
Materiellkontrol + + + + + + + + + + +
+ + + + + + + + + + +
Norway Norges Elektriske + + + + + + + + + +
Materiellkontroll + + + + + + + + + + +
< back to table of contents >
+ + + + + + + + + + +
Sweden Svenska Elektriska + + + + + + + + + +
Materielkontroll- + + + + + + + + + + +
anstalten + + + + + + + + + + +
Finland Sähkötar- + + + + + + + + + +
kastuskeskus + + + + + + + + + + +
+ + + + + + + + + + +
Austria Österreichischer + + + + + + + + + +
Verband für + + + + + + + + + + +
Elektrotechnik + + + + + + + + + + +
4 + + + + + + + + + +
Federal Verband Deutscher VDE 0660
Republic Elektrotechniker + + + + + + + + + + +
of Germany + + + + + + + + + + +
Great British Standards BS + + + + + + + + + +
Britain Institution EN 60947 4 + + + + + + + + + + +
+ + + + + + + + + + +
5 + + + + + + + + + +
International Electrical IEC 60947
Commission (IEC) + + + + + + + + + + +
Recommendation + + + + + + + + + + +
China China Quality
Certification Centre
Russia Eurasian Conformity + + + +
Belarus + + +
Kazakhstan + + +
Russian Russian Maritime
Federation Register of Shipping
Germanischer Lloyd + + + + + + + + + +
+ + + + + + + + + + +
+ + + + + + + + + + +
Lloyds Register EMEA + + + + + + + +
+ + + + + + + + + + +
+ + + + + + + + + + +
Switch approved + Switch conforms to requirements + No approval required
1
Approved under the “Component Program” (UL-Recognized Industrial Component). File No. E35541, Category Control No. NLRV2 (U.S.) and NLRV8 (Canada)
resp. File No. E60262, Category Control Number NRNT2 (U.S.) and NRNT8 (Canada).
2
Approved under the “Listing Program”. File No. E35541, Category Control No. NLRV (U.S.) resp. NLRV7 (Canada).
3
Switch types CAD11/CAD12 approved under the “Listing Program”. File No. E60262, Category Control No. NRNT (U.S.) resp. NRNT7 (Canada).
4
It is not required for Industrial Switchgear to bear a symbol but must conform to requirements. By stating the specific standard no. on the product the manufacturer
declares that all requirements of the product standard are met.
5
IEC does not operate an approval scheme.
6
File No. 13002ass No. 3211-05 resp. 4652-04.
43
Technical Data C, CA Switches
CA4
CA10
CA11
CA20
CA25 C42 C315
Selection Data CA4-1 CA10B CA11B CA20B CA25B C26 C32 C43 CA40 CA50 CA63 C80 C125 C200-4 C316
SEV3 380 V A 10 16 16 25 32 32 40 63 40 50 63 100 160 – 315
660 V A – 12 12 25 32 32 40 63 40 50 63 – – – 315
UL/Canada A 10 20 20 30 30 40 50 65 45 55 65 100 150 – 240
3
Pilot Duty UL/Canada Heavy VAC A300 A300 A600 A600 A300 A600 A600 A600 A600 A600 A600 – – – A600
Resistive load/motor load CEE A 4/2 10/6 10/6 16/10 – 25/10 32/10 40/10 – – – 63/10 – – –
2
NEMKO A 6/4 10/6 – 20/10 – – – – – – – – – – –
Breaking capacity 220 V-240 V A 50 150 150 200 280 280 380 550 290 330 440 860 1100 1100
2000
380 V-440 V A 50 150 150 200 250 250 360 550 290 330 440 860 1100 1100
2000
660 V-690 V A – 80 80 125 150 150 270 365 170 200 260 400 490 490 340
Power loss per contact at Iu W 0,4/0,9 0,9 0,9 0,9 0,7 1.3 1.3 1.7 1 1,8 2,8 5,8 3,8 6,7 17
Min. Ambient Temperature of Stages -25 °C (valid only without optional extra, C315/C316 on request)
5, 7
Max. Ambient Temperature of Stages open at 100 % Iu/Ith 55 °C during 24 hours with peaks up to 60 °C
enclosed at 100 % Ithe 35 °C during 24 hours with peaks up to 40 °C
1
Valid for lines with grounded common neutral termination, overvoltage category III, pollution degree 3. Values for other supply systems on request.
2
Valid for CA4 only. 3International Standards and Approvals, refer to page 43. 4For electromagnetic optional extras see additional data in Catalog 101.
44 5
Storage temperature: -40 °C to 85 °C (in case of temperature below -5 °C no shock load permissible).
Technical Data C, CA Switches
CA4
CA10
CA11
CA20
CA25 C42 C315
Selection Data CA4-1 CA10B CA11B CA20B CA25B C26 C32 C43 CA40 CA50 CA63 C80 C125 C200-4 C316
AC-2 Slip ring motor starting, 3 phase 220 V-240 V kW 2,5 4 4 5,5 7,5 8 10 18,5 10 11 18,5 30 37 37 55
reversing and plugging, 3 pole 380 V-440 V 4,5 7,5 7,5 11 15 15 18,5 30 18,5 22 30 45 55 55 90
star-delta starting 500 V – 10 10 15 18,5 18,5
22 40 22 30 40 55 75 75 110
CA4-CA50 660 V-690 V – 10 10 13 15 15 22 37 22 30 37 55 55 55 55
Direct-on-line starting,
AC-3 3 phase 220 V-240 V kW 1,5 3 3 4 5,5 5,5 7,5 11 7,5 11 11 15 22 22 37
star-delta starting 3 pole 380 V-440 V 2,2 5,5 5,5 7,5 11 11 15 18,5 15 18,5 18,5 30 37 37 55
CA63-C315 500 V – 5,5 5,5 7,5 11 11 15 18,5 15 18,5 18,5 30 37 37 55
660 V-690 V – 5,5 5,5 7,5 11 11 15 18,5 15 18,5 22 30 30 30 37
1 phase 110 V-120 V kW 0,3 0,6 0,6 1,5 2,2 2,2 2,5 3 2,5 3 3 3,7 5,5 5,5 11
2 pole 220 V-240 V 0,55 2,2 2,2 3 4 4 5,5 6 5,5 6 6 7,5 11 11 22
380 V-440 V 0,75 3 3 3,7 5,5 5,5 7,5 11 7,5 11 11 13 18,5 18,5 30
Direct-on-line starting,
AC-4 3 phase 220 V-240 V kW 0,37 0,55 0,55 1,5 2,5 2,7 3,7 5,5 3,7 4 5,5 6 10 10 15
< back to table of contents >
reversing, plugging and 3 pole 380 V-440 V 0,55 1,5 1,5 3 5,5 5,5 6 7,5 6 7 7,5 11 15 15 25
inching 500 V – 1,5 1,5 3 5,5 5,5 6 7,5 6 7 7,5 11 15 15 25
660 V-690 V – 1,5 1,5 3 5,5 5,5 6 7,5 6 7,5 9 11 15 15 22
AC-23A Frequent switching of 3 phase 220 V-240 V kW 1,8 3,7 3,7 5,5 7,5 7,5 11 15 7,5 11 15 30 37 37 75
motors or other high 3 pole 380 V-440 V 3 7,5 7,5 11 15 15 22 30 18,5 22 30 45 75 75 132
inductive loads 500 V – 7,5 7,5 11 15 15 30 45 18,5 22 30 55 90 90 132
660 V-690 V – 7,5 7,5 11 15 15 22 40 18,5 22 30 45 55 55 37
1 phase 110 V-120 V kW 0,37 0,75 0,75 1,5 2,2 2,2 2,5 4 2,2 2,5 4 5,5 11 11 18,5
2 pole 220 V-240 V 0,75 2,5 2,5 3 4 4 5,5 10 4 5,5 10 15 22 22 37
380 V-440 V 1,1 3,7 3,7 5,5 7,5 7,5 11 18,5
7,5 11 18,5 22 37 37 55
Ratings UL/Canada
Standard motor load 3 phase 110 V-120 V HP 0,75 1,5 1,5 3 5 5 7,5 7,5 7,5 7,5 7,5 10 15 – 30
DOL-Rating 3 pole 220 V-240 V 1 3 3 7,5 10 10 15 15 15 15 15 20 25 – 75
(similar AC-3) 440 V-480 V – – 5 10 – 20 25 25 25 25 30 30 40 – 75
550 V-600 V – – 5 10 – 25 30 30 25 30 30 40 50 – 60
1 phase 110 V-120 V HP 0,33
0,5 0,5 1,5 2 2 3 3 3 3 3 5 7,5 – 15
2 pole 220 V-240 V 0,75
1 1 3 5 5 7,5
7,5 7,5 7,5 7,5 10 15 – 40
277 V 0,75
2 2 3 5 5 7,5
7,5 7,5 7,5 10 10 15 – 40
440 V-480 V – – 2 5 – 10 15 15 15 15 15 20 25 – 50
550 V-600 V – – 2 5 – 15 20 20 15 20 20 25 30 – 50
1 phase 110 V-120 V HP – 0,17 0,17 0,33 1,5 1,5 1,5 2 – – – 3 5 – 7,5
2 pole 220 V-240 V – 0,5 0,5 0,75 3 3 3 5 – – – 7,5 10 – 15
277 V – 0,6 0,6 1 3 3 3 5 – – – 7,5 10 – 15
45
Technical Data C, CA Switches
CA4
CA10
CA11
CA20
CA25 C42 C315
Selection Data CA4-1 CA10B CA11B CA20B CA25B C26 C32 C43 CA40 CA50 CA63 C80 C125 C200-4 C316
Nm 0,4 0,6 0,6 1,3 1,3 1,3 2,2 3 1,8 1,8 1,8 4 4,5 8 14
Ib-in 3,5 5 5 12 12 12 19,5
26,4
16 16 16 35 39,8 70 125
contacts in series:: 1 2 3 4 5 6 8 CA4 CA10 CA10S CA20 CA20S CA25 CA25S CA40S CA63S
Permissible voltage in volts
Utilization category 24 48 – – – – – A – 3 – 4 – 5 – – –
DC-13 48 96 – – – – – A – 1,7 – 2,4 – 3 – – –
Control of electromagnets 60 120
– – – – – A – 1,4 – 1,8 – 2,5 – – –
Time constant L/R≤100ms 110
220
– – – – – A – 0,7 – 1 – 1,5 – – –
220
440
– – – – – A – 0,15 – 0,35 – 0,5 – – –
1
Cable lug must accept M8 (C200-4) and M12 (C315/C316) screw. 2Values for switches with spring return on request.
46
Technical Data L Switches
Selection Data
L350 L630
L351 L400 L600 L631 L800 L1000 L1200 L1600 L2000
min. voltage V on request
UL/Canada2 A
350 400 630 630 800 1000 1200 1600 2000
Anschlussklemmen
for Cable lug or copper bus
connection screw
M12 M12 M16 M16 M16 M16 M16 2xM16 4xM16
length mm 20 30 40 30 40 40 40 50 50
1
Valid for lines with grounded common neutral termination, overvoltage category III, pollution degree 3. Values for other supply systems on request.
2
International Standards and Approvals, refer to page 43. 3For electromagnetic optional extras see additional data in Catalog 101. 4Storage temperature:
-40 °C to 85 °C (in case of temperature below -5 °C no shock load permissible).
47
Technical Data CAD Switches
min. voltage V 17 1 6
AC-1
Resistive or low SEV2 1 V/6 V A – 5/3 –/5
inductive loads 12 V/24 V A – 2/1 5/5
48 V/110 V A – 0,8/0,4 4/3
220 V/380 V A – 0,2/0,13 2/1,3
440 V/500 V A – 0,1/0,08 1/0,8
600 V A – 0,05 0,5
2x 2x 2x
Flexible wire mm2 1,5 2,5 2,5
(sleeving in accordance with DIN 46228) (1) (2,5) (2,5)
Flexible AWG wires (without sleeve) AWG 16 14 14
Min. Ambient Temperature of Stages -25 °C (valid only without optional extra)
Max. Ambient Temperature of Stages 4, 6 open at 100 % Iu/Ith 55 °C during 24 hours with peaks up to 60 °C
enclosed at 100 % Ithe 35 °C during 24 hours with peaks up to 40 °C
1
Valid for lines with grounded common neutral termination, overvoltage category III, pollution degree 3. Values for other supply systems on request.
2
International Standards and Approvals, refer to page 43. 3Max. 300 V. 4For electromagnetic optional extras see additional data in Catalog 101.
48 5
Values for switches with spring return on request. 6Storage temperature: -40 °C to 85 °C (in case of temperature below -5 °C no shock load permissible).
7
Values with lower voltages on request.
mm
Dimensions inch
E E
for CA4, CA4-1, E-V
CAD4-1 ER
E-V
for CA4, CA4-1,
CAD4-1
CA10
CA4 CA11 CA10B CA403 C3154
CA4-1 CAD11 CA11B CA503 C125 L switches L switches
CAD4-1 CAD12 CA20 CA253 CA20B CA25B C26 C32 C423 C43 CA633 C80 C200-4 Size S2 Size S3
0 48 48 48 (64) 64 64 64 64 64 (88) 88 64 (88) 88 88 88 130
A 1.18 1.89 1.89 1.89 (2.52) 2.52 2.52 2.52 2.52 2.52 (3.46) 3.46 2.52 (3.46) 3.46 3.46 3.46 5.12
29,5 43 45 46 56 56 58 60 66 84 55,5x64 84 88 88 126
B 1.16 1.69 1.77 1.81 2.20 2.20 2.28 2.36 2.60 3.30 2.19x2.52 3.30 3.46 3.46 4.96
< back to table of contents >
2
M, additional length for mounting ER only
3 4
Dimensions in ( ) for ER mounting plate only Dimensions in ( ) for L800, L1200, L1600
EF EF
for CA4, CA4-1, EF-V
CAD4-1 ERF
EF-V
for CA4, CA4-1,
CAD4-1
CA10
CA4 CA11 CA10B CA403 C3154
CA4-1 CAD11 CA11B CA503 C125 L switches L switches
CAD4-1 CAD12 CA20 CA253 CA20B CA25B C26 C32 C423 C43 CA633 C80 C200-4 Size S2 Size S3
30 48 48 48 (64) 64 64 64 64 64 (88) 88 64 (88) 88 88 88 130
A 1.18 1.89 1.89 1.89 (2.52) 2.52 2.52 2.52 2.52 2.52 (3.46) 3.46 2.52 (3.46) 3.46 3.46 3.46 5.12
29,5 43 45 46 56 56 58 60 66 84 55,5x64 84 88 88 126
B 1.16 1.69 1.77 1.81 2.20 2.20 2.28 2.36 2.60 3.30 2.19x2.52 3.30 3.46 3.46 4.96
4 4 4 4 4 4 4 4 4 5,5 4 5,5 5,5 5,5 7
C .16 .16 .16 .16 .16 .16 .16 .16 .16 .22 .16 .22 .22 .22 .28
3,2 5 5 5 5 5 5 5 5 (6) 6 5 (6) 6 6 6 7
D1 .13 .20 .20 .20 .20 .20 .20 .20 .20 (.24) .24 .20 (.24) .24 .24 .24 .28
8-11 15-19 15-19 15-19 19-22 19-22 19-22 19-22 19-22 26-30 19-22 26-30 26-30 26-30 22-25
D2 .31-.43 .59-.75 .59-.75 .59-.75 .75-.87 .75-.87 .75-.87 .75-.87 .75-.87 1.02-1.18 .75-.87 1.02-1.18 1.02-1.18 1.02-1.18 .87-.98
- 36 36 36 (48) 48 48 48 48 48 (68) 68 48 (68) 68 68 68 104
E - 1.42 1.42 1.42 (1.89) 1.89 1.89 1.89 1.89 1.89 (2.68) 2.68 1.89 (2.68) 2.68 2.68 2.68 4.09
M2 - 4,5 4,5
- .18 .18
5,5
.22
5 5,5 7,5
.20 .22 .30
7,5
.30
7,5 7,5 7,6 9,4 27,5
.30 .30 .30 .37 1.08
27,5 11,9 (32)
1.08 .47 (1.26)
1 - - - - - - - - - - - - - -
M1 .04 - - - - - - - - - - - - - -
2
M, additional length for mounting ERF only
3 4
Dimensions in ( ) for ERF mounting plate only Dimensions in ( ) for L800, L1200, L1600
1
see page 56
49
mm
Dimensions inch
E22
E22-V
EG
EGF
CA10 C125
CA11 CA40 C200-4
CAD11 CA50 L switches
CAD12 CA20 CA25 C26 C32 C42 CA63 C80 Size S2
64 64 64 88 88 88 88 130 130
A 2.52 2.52 2.52 3.46 3.46 3.46 3.46 5.12 5.12
43 45 46 58 60 66 55,5x64 84 88
B 1.69 1.77 1.81 2.28 2.36 2.60 2.19x2.52 3.30 3.46
4 4 4 5,5 5,5 5,5 5,5 7 7
C .16 .16 .16 .22 .22 .22 .22 .28 .28
5 5 5 6 6 6 6 7 7
D1 .20 .20 .20 .24 .24 .24 .24 .28 .28
10-22 10-22 10-22 13-30 13-30 13-30 13-30 15,5-25 15,5-25
EG D2 .39-.87 .39-.87 .39-.87 .51-1.18 .51-1.18 .51-1.18 .51-1.18 .61-.98 .61-.98
19-22 19-22 19-22 26-30 26-30 26-30 26-30 22-25 22-25
EGF D2 .75-.87 .75-.87 .75-.87 1.02-1.18 1.02-1.18 1.02-1.18 1.02-1.18 .87-.98 .87-.98
48 48 48 68 68 68 68 104 104
E 1.89 1.89 1.89 2.68 2.68 2.68 2.68 4.09 4.09
6,7 6,7 6,7 0,5 0,5 0,5 0,5 2 2
M .26 .26 .26 .02 .02 .02 .02 .08 .08
1
see page 56
50
mm
Dimensions inch
E9
E91
E92
CA4
CA4
CAD4-1
29,5
1.16
B
< back to table of contents >
CA4
E93
CA4-1
E94 CAD4-1 E9 E91 E92 E93 E94
6 6,35 - - -
D .24 .25 - - -
12 12,8 - - -
F .47 .50 - - -
15,4 17,4 32,5 28,5 32,5
G .61 .69 1.28 1.12 1.28
4,7 5,5 - - -
K .19 .22 - - -
- - - 4 -
M - - - .16 -
KN1
KD1
KN2
1
see page 56
51
mm
Dimensions inch
ED22 EC
ED
EC1
ED1
52
mm
Dimensions inch
CA10
CA4 CA11
CA4-1 CAD11
CAD4-1 CAD12 CA20 CA25
FS1... FH3... FT3... 30 48 48 48
A/E 1.18 1.89 1.89 1.89
FS2... FH4... FT4...
- 64 64 64
FS4... FT1... FH3... - 2.52 2.52 2.52
FT2... - 64 64 64
FH4... - 2.52 2.52 2.52
FT6... B 28 43 45 46
1.10 1.69 1.77 1.81
5 6 6 6
C .20 .24 .24 .24
29,5 39 39 39
D 1.16 1.54 1.54 1.54
< back to table of contents >
F 39 59 59 59
1.54 2.32 2.32 2.32
FH4... - 78,5 78,5 78,5
- 3.09 3.09 3.09
M 12,5 18,2 18,2 18,2
.49 .72 .72 .72
FH3... - 25,2 25,2 25,2
- .99 .99 .99
FH4... - 25,2 25,2 25,2
- .99 .99 .99
VE VE22
VE-V VE22V
VF VF22
VF-V VF22V
CA10
CA11 CA10B CA402 C3153
CAD11 CA11B CA502 C125 L switches L switches
CAD12 CA20 CA252 CA20B CA25B C26 C32 C422 C43 CA632 C80 C200-4
Size S2 Size S3
48 48 48 (64) 64 64 64 64 64 (88) 88 64 (88) 88 88 88 128
A 1.89 1.89 1.89 (2.52) 2.52 2.52 2.52 2.52 2.52 (3.46) 3.46 2.52 (3.46) 3.46 3.46 3.46 5.04
43 45 46 56 56 58 60 66 84 55,5x64 84 88 88 126
B 1.69 1.77 1.81 2.20 2.20 2.28 2.36 2.60 3.30 2.19x2.52 3.30 3.46 3.46 4.96
10,5 10,5 10,5 13,5 13,5 13,5 13,5 13,5 16 13,5 16 16 16 19,3
C .41 .41 .41 .53 .53 .53 .53 .53 .63 .53 .63 .63 .63 .76
4,1 4,1 4,1 4,1 4,1 4,1 4,1 5,4 5,4 5,4 5,4 5,4 5,4 7
D1 .16 .16 .16 .16 .16 .16 .16 .21 .21 .21 .21 .21 .21 .28
5 5 5 5 5 5 5 5 6 5 (6) 6 6 6 7
D2 .20 .20 .20 .20 .20 .20 .20 .20 .24 .20 (.24) .24 .24 .24 .28
8-19 8-19 8-19 10-22 10-22 10-22 10-22 10-22 13-30 10-22 13-30 13-30 13-30 15,5-25
D3 .31-.75 .31-.75 .31-.75 .39-.87 .39-.87 .39-.87 .39-.87 .39-.87 .51-1.18 .39-.87 .51-1.18 .51-1.18 .51-1.18 .61-.98
36 36 36 (48) 48 48 48 48 48 (68) 68 48 (68) 68 68 68 104
E 1.42 1.42 1.42 (1.89) 1.89 1.89 1.89 1.89 1.89 (2.68) 2.68 1.89 (2.68) 2.68 2.68 2.68 4.09
2,2 2,2 3,2 2,5 2,5 5 5 5 7 5,1 8,9 8,9 27 11,4 (31.9)
M .09 .09 .13 .10 .10 .20 .20 .20 .28 .21 .35 .35 1.06 .45 (1.25)
2 3
Dimensions in ( ) for revertive mounting plate Dimensions in ( ) for L800, L1200, L1600
1
see page 56
53
mm
Dimensions inch
Base Mounting
VE1 CA10
CA11 CA10B CA40
CAD11 CA11B CA50
CAD12 CA20 CA25 CA20B CA25B C26 C32 C42 CA63
48 48 48 64 64 64 64 64 64
A 1.89 1.89 1.89 2.52 2.52 2.52 2.52 2.52 2.52
43 45 46 56 56 58 60 66 55,5x64
B 1.69 1.77 1.81 2.20 2.20 2.28 2.36 2.60 2.19x2.52
10,5 10,5 10,5 13,5 13,5 13,5 13,5 13,5 13,5
C .41 .41 .41 .53 .53 .53 .53 .53 .53
5 5 5 5 5 5 5 5 5
D1 .20 .20 .20 .20 .20 .20 .20 .20 .20
8-15 8-15 8-15 10-15 10-15 10-15 10-15 10-15 10-15
D2 .31-.59 .31-.59 .31-.59 .39-.59 .39-.59 .39-.59 .39-.59 .39-.59
.39-.59
36 36 36 48 48 48 48 48 48
E 1.42 1.42 1.42 1.89 1.89 1.89 1.89 1.89 1.89
48 48 48 70 70 70 70 70 70
F 1.89 1.89 1.89 2.76 2.76 2.76 2.76 2.76 2.76
60 60 60 60 60 60 60 60 60
G 2.36 2.36 2.36 2.36 2.36 2.36 2.36 2.36 2.36
UE1 Lamp
UE2
UE3
Face plates for mounting E, EF, ER, ERF, EG, EGF, KN1, KD1, KN2, EC, EC1, ED, ED1, VE, VE1, VF
< back to table of contents >
Size A C
30 5,5
S00 1.18 .22
48 6,3
S0 1.89 .25 Size A B C
64 7,4 30 39 5,5
S1 2.52 .29 S00 1.18 1.54 .22
88 8,5 48 59 6,7
S2 3.46 .33 S0 1.89 2.32 .26
130 11,5 64 78 7,4
S3 5.12 .45 S1 2.52 3.07 .29
CA10
CA11 CA40
CAD11 CA20 CA50
Amendment CAD12 CA25 C26 C32 C42 CA63
S0 switches with latching mechanism size S1 5,4 - - - - -
B .21 - - - - -
S1 switches with latching mechanism size S2 - - 9,2 9,2 - 8,2
C - - .36 .36 - .32
with snap action - 17,3 12,2 12,2 12,2 12,2
S - .68 .48 .48 .48 .48
55
mm
Dimensions inch
Additional Length
C200-4
L351
L350 L631
L630
L1000 C315
C316
L400
L600
L800
L1200
L1600
Length L
C125
CA4 CA10 CA40 C200-4 C315
CA4-1 CAD11 CA50 L switches L switches
Stages CAD4-1 CAD12 CA11 CA20 CA25 CA10B CA11B CA20B CA25B C26 C32 C42 C43 CA63 C80 Size S2 Size S3
30 33,5 36,7 37,7 39 38,9 42,1 43,1 44,4 42 46,8 50,8 59 42,5 61,5 67,5 78,6
1 1.18 1.32 1.44 1.48 1.51 1.53 1.66 1.70 1.75 1.65 1.84 2.00 2.32 1.67 2.42 2.66 3.09
38 43 49,4 50,4 53 48,4 54,8 55,8 58,4 54,7 64,3 72,3 80,5 55,2 88,0 100 117,2
2 1.50 1.69 1.94 1.98 2.09 1.91 2.16 2.20 2.30 2.15 2.51 2.85 3.17 2.17 3.46 3.94 4.61
46 52,5 62,1 63,1 67 57,9 67,5 68,5 72,4 67,4 81,8 93,8 102 67,9 114,5 132,5 155,8
3 1.81 2.07 2.44 2.48 2.64 2.28 2.66 2.70 2.85 2.65 3.22 3.69 4.02 2.67 4.51 5.22 6.13
54 62 74,8 75,8 81 67,4 80,2 81,2 86,4 80,1 99,3 115,3 123.5 80,6 141 165 194,4
4 2.13 2.44 2.94 2.98 3.19 2.65 3.16 3.20 3.40 3.15 3.91 4.54 4.86 3.17 5.55 6.50 7.65
62 71,5 87,5 88,5 95 76,9 92,9 93,9 100,4 92,8 116,8 136,8 145 93,3 167,5
197,5 233
5 2.44 2.81 3.44 3.48 3.74 3.03 3.66 3.70 3.95 3.65 4.60 5.39 5.71 3.67 6.59 7.78 9.17
70 81 100,2 101,2 109 86,4 105,6 106,6 114,4 105,5 134,3 158,3 166,5 106 194 230 271,6
6 2.76 3.19 3.94 3.98 4.29 3.40 4.16 4.20 4.50 4.15 5.29 6.23 6.56 4.17 7.64 9.06 10.69
78 90,5 112,9 113,9 123 95,9 118,3 119,3 128,4 118,2 151,8 179,8 188 118,7 220,5 262,5 310,2
7 3.07 3.56 4.44 4.48 4.84 3.78 4.66 4.70 5.05 4.65 5.98 7.08 7.40 4.67 8.68 10.33 12.21
86 100 125,6 126,6 137 105,4 131 132 142,4 130,9 169,3 201,3 209,5 131,4 247 295 348,8
8 3.39 3.94 4.94 4.98 5.39 4.15 5.16 5.20 5.60 5.15 6.67 7.93 8.25 5.17 9.72 11.61 13.73
94 109,5 138,3 139,3 151 114,9 143,7 144,7 156,4 143,6 186,8 222,8 231 144,1 273,5 327,5 387,4
9 3.70 4.31 5.44 5.48 5.94 4.52 5.66 5.70 6.15 5.65 7.36 8.77 9.09 5.67 10.77 12.89 15.25
- 119 151 152 165 124,4 156,4 157,4 170,4 156,3 204,3 244,3 252,2 156,8 300 360 426
10 - 4.68 5.94 5.98 6.50 4.90 6.16 6.20 6.70 6.15 8.04 9.62 9.54 6.17 11.81 14.17 16.77
- 128,5 163,7 164,7 179 133,9 169,1 170,1 184,4 169 221,8 265,8 274 169,5 326,5 392,5 464,6
11 - 5.06 6.44 6.48 7.05 5.27 6.66 6.70 7.25 6.65 8.73 10.46 10.79 6.67 12.85 15.45 18.29
- 138 176,4 177,4 193 143,4 181,8 182,8 198,4 181,7 239,3 287,3 295,5 182,2 353 425 503,2
12 - 5.43 6.94 6.98 7.60 5.65 7.16 7.20 7.80 7.15 9.42 11.31 11.63 7.17 13.90 16.73 19.81
56
< back to table of contents >
Notes:
57
The Range of “Blue Line” Switchgear
Technical literature covering the following products is available on request.
Catalog
Number
We reserve the right to make technical and dimensional changes without prior notice.
58
SALES AND SERVICE ORGANIZATION
Great Britain
Kraus & Naimer Ltd.
115 London Road
NEWBURY/BERKSHIRE RG14 2AH
Tel: +44 1635 262626, Fax: 37807
sales-uk@krausnaimer.com
Contact us:
www.krausnaimer.com