Professional Documents
Culture Documents
CV Europass 20190131 Marano en
CV Europass 20190131 Marano en
CV Europass 20190131 Marano en
WORK EXPERIENCE
Current Activities:
▪ Flexible Multibody Simulation of conventional powertrain
▪ Target definition and NVH Analysis of new E-Axles
▪ Optimization of Gear microgeometry to minimize gear whine noise
▪ High torque misaligned spline couplings design. (Supervisor of a Master Thesis with INSA Lyon)
PERSONAL SKILLS
English C1 C1 C1 C1 C1
Cambridge First Certificate
French A1 A1 A1 A1 A1
Levels: A1 and A2: Basic user - B1 and B2: Independent user - C1 and C2: Proficient user
Common European Framework of Reference for Languages
Communication skills ▪Excellent interaction skills in teamwork and ability to adapt to any situation;
▪Collaborative spirit and desire to compete in a team for the common purpose of achieving the
ultimate goal, always available to listen to the colleagues' advices;
▪Ability to work also alone, if necessary, accepting any kind of responsibility.
Job-related skills ▪ CAE - Multibody: Recurdyn V8R5, AVL Excite, MSC Adams, AMESim, Siemens VirtualLab Motion
▪ CAE - Structural Dynamics: Abaqus 6.14, Comsol Multiphysics, Altair Hyperworks 2017,
Optistruct, Nastran, Altair SimLab
▪ Transmission Design: KISSSoft, KYSSSys, MASTA, Helical 3D
▪ NVH: LMS VirtualLab
▪ Programming: MATLAB/Simulink, Mathematica, Microsoft Excel
▪ Microsoft Office Suite
Driving licence A, B
ADDITIONAL INFORMATION
Publications ▪ D. Marano,T. Tanev, A. Cammarata, R. Sinatra Elastostatic Model of a New Hybrid Minimally-
Invasive-Surgery Robot, IFToMM World Congress, Oct. 25-30, 2015, Taipei, Taiwan
▪ D. Marano, G. Fichera, A. Cammarata, R. Sinatra, D. Prati Modeling of a three-axes MEMS
gyroscope with feedforward PI quadrature compensation, International Joint Conference on
Mechanics, Design Engineering & Advanced Manufacturing 2016
▪ D.Marano, F. Pellicano, A.O.Andrisano Multiphysic modeling of a MEMS gyroscope, X Giornata di
Studi E. Funaioli, UNIBO, 2016
▪ D. Marano, A. Piantoni, L. Tabaglio, M. Lucchi, M. Barbieri, F. Pellicano Effects of gear
manufacturing errors on rack and pinion steering meshing, World Congress on Condition
Monitoring, London June 2017
▪ D. Marano, E. Pallara, F. Pellicano Modeling and Simulation of Rack-Pinion Gears, International
CAE Conference, 2017
▪ D. Marano, E. Pallara, F. Pellicano Modeling and Simulation of Rack-Pinion Steering Systems with
Manufacturing Errors for Performance Prediction, International Journal of Vehicle Systems
Modelling and Testing, 2018
Projects ▪ METAGEAR European project - Development of an open source FEM for gear analysis and
optimization – University of Modena, Department "Enzo Ferrari", Vibrations and Powertrain Lab.
(2015-2016)
▪ BIODIVALUE European project - Software development for roll and pitch stabilization of a towfish –
University of Catania, Department of Industrial Engineering
Teaching Responsibilities ▪ Taught assistent for Applied Mechanics course, Mechanical Engineering BSc, University of
Modena and Reggio Emilia, Prof. Francesco Pellicano; member of the examining board of this
session
▪ AY 2015-2016: Taught assistent for Mechatronics course, Mechanical Engineering MSc, University
of Catania, Prof. Rosario Sinatra
▪ AY 2014-2015: Tutor for Mechanics of materials course, Industrial Engineering BSc, University of
Catania, Prof. Massimo Cuomo
▪ AY 2013-2014: Tutor for Mathematical Analysis course, Civil Engineering BSc, University of
Catania Prof. Salvatore D’Asero