The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.
The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.
The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.
The document reports on test results from a CPC device with serial number FH175L (V1) on April 15, 2019. It performed two test cards: a Quick test that had no overloads or assessment, and a TanDelta test that measured capacitance, dissipation factor, and frequency at different voltages and had no overloads. The TanDelta test used a RJ185X CPTD calibrated on September 22, 2018 to take the measurements.