Professional Documents
Culture Documents
A. String Diagram: Management
A. String Diagram: Management
A. String Diagram: Management
a. String diagram
a. Replace of component
b. Repair of component
c. Service of component
3. A diagram showing the path followed by men and materials while performing a task
is known as.
b. string diagram
d. travel chart
d. A compact estimate of the handling which must be done between various work sections
5 The symbol of rectangle shape represents the process of ________ in the process analysis.
a. Transportation
b. Inspection
c. Operation
d. Delay
6 Buildings for foundries and steel mills are often of the
a. Flat roof
b. Bow string
c. Highbay https://scholarexpress.com/multiple-choice-questions-mcq-on-plant-location-and-
layout/
d. Saw tooth
7 The chart which gives an estimate about the amount of material handling between
a. Flow chart
b. Travel chart
c. Process chart
8 Which of the following industries should be located near the vicinity of raw materials?
a. Cycles
b. Televisions
c. Steel mills
d. Sewing machines
b. Gantt chart
a. operation
b. Inspection
c. transport
d. delay/temporary storage
11 For which of the following industry humid climate is helpful?
a. Cotton
b. Light Bulb
c. Automobile
d. Steel
a. inspection
b. transport
c. operation
d. delay/temporary storage
a. inspection
b. operation
c. transport
d. Holds
14________ process chart is a graphic representation of the sequence of all the operations and
inspections involved in a process or procedure?
a. Flow process
b. Travel
c. Outline
d. Operation http://www.economicsdiscussion.net/engineering-economics/charts-used-in-motion-
study-5-types/21703
a. Man
b. Method http://www.economicsdiscussion.net/engineering-economics/charts-used-in-motion-
study-5-types/21703
c. Material
d. Machine
a. delay/temporary storage
b. transport
c. permanent storage
d. operation
d. All of these
a. Flat roof
b. Saw tooth
c. Monitor https://scholarexpress.com/multiple-choice-questions-mcq-on-plant-location-and-
layout/
d. Highbay
a. Delay
b. Inspection http://scholarexpress.com/multiple-choice-questions-mcq-production-management-
set-2/
c. Operation
d. Transportation
20 Material handling and plant location is analysed by
a. Travel chart
https://studysite.org/Discuss/Question/material_handling_and_plant_location_is_analyzed_by-
14314068.htm
b. Emerson chart
c. Bin chart
d. Gnatt chart
21 In a ………….. Layout all machines or process of the same type are grouped together.
a. Process
b. Fixed position
c. Factory
d. Product
23 This chart is a graphic representation of all the production activities occurring on the shop floor
c. Templates
25. Space available in vertical and horizontal directions is most effectively utilized” is known as
principle of
a. Flow
b. Flexibility
d. Minimum distance