Professional Documents
Culture Documents
Full Wave Rectifiers - Claudio Bryllian 175060301111039 - Rizky Zuhri 175060301111033 - Muhammad Fauzan 17506030011129 PDF
Full Wave Rectifiers - Claudio Bryllian 175060301111039 - Rizky Zuhri 175060301111033 - Muhammad Fauzan 17506030011129 PDF
BY:
CLAUDIO BRYLLIAN ADAM
RIZKY ZUHRI
MUHAMMAD FAUZAN
4.1 The brigde rectifiers, as shown in this figure below:
Has the value of Vm: 100 V with 60 Hz and a series RL load , with R: 10 ohm L: 10mH.
a. Determine the average current in the load
b. Estimate peak to peak variation in load current
c. Determine the power absorbed by the load and the power factorof the circuit
d. Determine the average and rms currents in the diode
Analysis:
a.
2 x 3,39A = 6.78 A
4.3 For the full wave bridge rectifier circuit of figure below
Analysis:
To find the power absorbed, we have to find the I average and I rms
Io = 14,1 A
Irms = 15,9 A
Analysis:
a. For 5 ohm
The average value of Io and Voutput is 14,2 A and 71 V
So for RMS value is
Io = 2,11 A
V = 105,7 V
Io = 8,821 A
But in the calculation we get the value of
P= 967,4 W
While in the calculation we get