Professional Documents
Culture Documents
4597-AAB-SC-09 R0v1 38
4597-AAB-SC-09 R0v1 38
⌂ This subsec on sets the input forces for the connec on under inves ga on.
≡
Considering the same forces and moments as in Sec on A}:
F1 = 11.48⋅ kN ← Force Along X Axis Note: All set of forces from all load combina ons
are checked in this design sheet. However,
F2 = 0.40⋅ kN ← Force Along Y Axis only the most cri cal with the over-all most
onerous effect is presented! For cross
F3 = 0.00⋅ kN ← Force Along Z Axis checking refer to so ware's file.
Adjus ng the forces and moments to account for the eccentricity from the point of applica on of the forces to the centroid of the fastener and/or weld group:
( eF1 )
eF2 eF3 := ( 447.00 0.00 100.00 ) ⋅ mm ← Eccentricity from the Point of
Applica on of Forces to the Centroid of
the Fastener and/or Weld Group
38 of 72
TempVer20.0_012018 | Engineer: D. Dumapit | Checked: S.M. Lomboy Jr.