Professional Documents
Culture Documents
Mongoose Pro Shaker BR
Mongoose Pro Shaker BR
In today’s high-cost, high-octane onshore and With the MONGOOSE PRO† shaker, both
your drilling budget and the environment
offshore drilling environments, an optimum come out ahead. The generous throughput
capacity of the shaker can handle large
solids control package is imperative to reducing cuttings volumes generated by high
ROP, saving both rig time and chemical
costly non-productive time (NPT) while meeting consumption. The normal mode recovers
greater amounts of valuable drilling fluid
increasingly strict environmental regulations. and produces drier cuttings that reduce
As the rate of penetration (ROP) changes disposal costs and prolong screen life.
Since it processes drill solids more
during drilling, your shakers must be able to thoroughly than conventional shakers,
the cuttings require much less treatment
keep pace and handle a wide range of solids for disposal while reduced dilution means
a smaller waste stream.
and fluid compositions. When using premium
drilling fluids, you also need a shaker that
delivers maximum recovery to convert what
otherwise would be waste to beneficial reuse.
Combining the power of dual motion
with configuration flexibility
APPROXIMATE LOCATION
OF ELECTRICAL CONNECTION
(3/4" FNPT)
O [ 10.1
257 ]
112.6 O [ 8.1
206 ]
[ 2860 ]
O [ 6.1
156 ]
B B
37.4
[ 951 ]
REMOVABLE INSPECTION
COVERS 10" 30.0
(2 PLCS) [ 762 ]
10" INLET
29.0
[ 737 ]
8" INLET
REMOVABLE 28.0
[ 711 ]
FEEDER LID 6" INLET
10.5
[ 267 ] RECTANGULAR COVER
31.5 PLATE AT BYPASS
[ 800 ] RECTANGULAR TO PIPE
TRANSISTION AVAILABLE
MOTOR ROTATION
REAR VIEW
PLATE
DECK ANGLE
INDICATOR
(2 PER SHAKER)
54.9 [1394] +3 °
47.2 APPROX [ 52.4
1330 ] 0 °
1.5 [ 1199 ] 49.9 [1267] -3 ° 43.4
4X O [ 38 ] [ 1102 ]
29.0
23.6 [ 737 ]
[ 599 ] WEIR HEIGHT
APPROX C.G.
13.0
[ 330 ]
APPROVED SKID HEIGHT
LIFTING
POINT 30.3
(4 PLCS) [ 770 ] REMOVABLE MUD EARTH GROUNDING
APPROX C.G. OUTLET COVER 36.5 18.3 POINT (2 PLCS)
63.0 (2 PLCS) [ 927 ] [ 464 ]
[ 1600 ]
SKID WIDTH 48.4
[ 1230 ]
64.2 APPROX C.G.
[ 1630 ]
92.9
[ 2359 ]
68.9 SKID LENGTH
[ 1749 ]
OVERALL 119.8
WIDTH [ 3044 ]
OVERALL
LENGTH
These renderings are for information purposes only and are not actual schematics.
MONGOOSE PRO Dual, Triple and Quad Shakers
take performance to a new dimension
Applications often arise that are so slide gates, and a bypass valve that either MONGOOSE PRO dual shaker
challenging that even the ultra-efficient balances or completely diverts flow ■■ Length: 124 in. (3,150 mm)
MONGOOSE PRO shaker needs a boost. from a shaker. Multiple configurations of ■■ Width: 145 in. (3,689 mm)
For those applications that require even mud cleaners also can be added to the
more capabilities, two, three, or four dual, triple, or quad shakers. In addition,
■■ Height at 0°: 52.4 in. (1,330 mm)
MONGOOSE PRO shakers can be pre- interconnected walkways between shakers ■■ Weir height: 29 in. (737 mm)
aligned at the factory and mounted together allow safe and easy access. ■■ Weight: 9,400 lb (4,264 kg)
on a single skid. The unit is engineered to be
moved by a single lift, reducing the time and Available options: MONGOOSE PRO triple shaker
costs associated with rig moves. ■■ Multiple header boxes ■■ Length: 124in. (3,150 mm)
The dual and triple units include a common ■■ Mud cleaner/s ■■ Width: 230 in. (5,842 mm)
possum belly, a single flowline connection ■■ Lifting frame ■■ Height at 0°: 56.4 in. (1,330 mm)
to the individual shakers, integral feeder
■■ Weir height: 33 in. (838 mm)
■■ Weight: 15,000 lb (6,804 kg)
MONGOOSE PRO Mud Cleaners
available for all configurations
To enhance efficiencies even more, the The MONGOOSE PRO mud cleaners MONGOOSE PRO mud cleaner
flexible design of the MONGOOSE PRO are designed with a low profile of ■■ Length: 119.8 in. (3,044 mm)
shaker allows for the installation of approximately 64 in. (1,626 mm) to the ■■ Width: 93.8 in. (2,381 mm)
mud cleaners for single, dual, triple or top of the trough. This compact
quad configurations. Our mud cleaning design minimizes height requirement
■■ Height: 98.6 in. (2,503 mm)
technology includes d-sander† units in and the overall rig-site footprint. ■■ Weir height: 29 in. (737 mm)
two or three 12-in. hydroclone assemblies, The integral bypass between the shaker ■■ Weight: 6,200 lbs (2,820 kg)
and d-silter† units available in six, eight and d-sander/d-silter allows for
or ten 4-in. twin-hydroclone assemblies. inspection and maintenance without
The MONGOOSE PRO mud cleaners ladders or scaffolds.
operate independently as d-sanders,
d-silters and flowline shakers.
MONGOOSE PRO Composite
Screens provide longer
life, more usable area
The intrinsic cost-effective performance of These highly engineered screens also
the MONGOOSE PRO shaker is enhanced provide resistance to corrosive drilling
even more when combined with the fluids. Composite construction creates
M-I SWACO high-capacity composite an ultra-tight seal between the screen
shaker screens, the most rugged, long- and screen bed, eliminating costly solids
lasting and most efficient screens available. bypass. The unique screen locking
mechanism wedges the screen firmly
Standard to the MONGOOSE PRO shaker
in place and allows for simple and safe
and unique in the industry, the proven
removal of the screen for repair or
composite screens offer significant fluid
replacement.
capacity, excellent resistance to blinding,
drier solids discharge and a large net usable
screen area.
MONGOOSE PRO Shaker
proves itself in the field
This information is supplied solely for informational purposes and M-I SWACO makes no guarantees or
warranties, either expressed or implied, with respect to the accuracy and use of this data. All product
warranties and guarantees shall be governed by the Standard Terms of Sale. Nothing in this document
is legal advice or is a substitute for competent legal advice.