Professional Documents
Culture Documents
Bolting Guidelines SOM For R-3001 R-5301!2!3 R-6505-6
Bolting Guidelines SOM For R-3001 R-5301!2!3 R-6505-6
Bolting Guidelines SOM For R-3001 R-5301!2!3 R-6505-6
Bolt-tightening Guidelines
Revision: 00 Status: Draft
Document Type: PRO Subdepartment: Inspections Department: TSS Rev. Date: 3-June-15
Department Document Number: TLF-TSS-DCC-PRO-000001 Page 13 of 28
Other reference
• If target torque values for different target prestress levels are necessary,
these may be obtained by reducing the values in
This document is the property of STAATSOLIE. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
SOM Document Number:
Technical Services TLF-TSS-DCC-PRO-000001
Bolt-tightening Guidelines
Revision: 00 Status: Draft
Document Type: PRO Subdepartment: Inspections Department: TSS Rev. Date: 3-June-15
Department Document Number: TLF-TSS-DCC-PRO-000001 Page 15 of 28
Other reference
This document is the property of STAATSOLIE. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
SOM Document Number:
Technical Services TLF-TSS-DCC-PRO-000001
Bolt-tightening Guidelines
Revision: 00 Status: Draft
Document Type: PRO Subdepartment: Inspections Department: TSS Rev. Date: 3-June-15
Department Document Number: TLF-TSS-DCC-PRO-000001 Page 17 of 28
Other reference
d. Continue tightening the bolts, but on circular clockwise pattern at the Final torque values
as provided in
This document is the property of STAATSOLIE. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
SOM Document Number:
Technical Services TLF-TSS-DCC-PRO-000001
Bolt-tightening Guidelines
Revision: 00 Status: Draft
Document Type: PRO Subdepartment: Inspections Department: TSS Rev. Date: 3-June-15
Department Document Number: TLF-TSS-DCC-PRO-000001 Page 20 of 28
Other reference
Table 5 Recommended Torque Values1 for A193-B7, B16, A320-L7 if additional tightening is necessary for
Prestress 60 ksi/ Lubrication friction factor 0.12 SPW, RJ, kamprofile, MJ-G and solid metal gaskets
Table 6 Recommended Torque Value1 for A193-B, B16, A320-L7, if additional tightening is necessary for
Prestress 60 ksi/ Lubrication friction factor 0.16 SPW, RJ, kamprofile, MJ-G and solid metal gaskets