Professional Documents
Culture Documents
CH 05 - RAC - 0011810000800MA02 - 3 - 0
CH 05 - RAC - 0011810000800MA02 - 3 - 0
TRAINING COURSE
MSSR MODE-S RACK
(DOUBLE FRAME)
Warning of Confidentiality
Date: 30/03/2009
any purpose other than that for which it is supplied. It must not be reproduced either wholly or
partially, copied or transmitted to any person without the authorization of Indra.
2
MSSR MODE-S RACK (DOUBLE FRAME)
DOCUMENTATION CONTROL
PAGE EDITION REVISION EDITION REVISION DATE AFFECTED PAGES REASON OF THE CHANGES
ACRONYMS
Edition: 3 Revision: 0
MEX Mode S Extractor Unit
Date: 30/03/2009
MSSR Monopulse Secondary Surveillance Radar
MVEX Mode S Extractor Ventilation Unit
5
MSSR MODE-S RACK (DOUBLE FRAME)
ACRONYMS
INDEX
01 General Description
Elements and Location
Functional Description
Housed Equipment
02 Description of Elements
Power Distribution Circuit
Power Relay Control (PRC) Unit
Radio Frequency Switch (RRF) Device
Rear Connections (PAN) Panel
GENERAL DESCRIPTION
Elements & Location
GENERAL DESCRIPTION
Functional Description
Edition: 3 Revision: 0
Date: 30/03/2009
9
MSSR MODE-S RACK (DOUBLE FRAME)
GENERAL DESCRIPTION
Functional Description
GENERAL DESCRIPTION
Housed Equipment
IRS-20MP/S System
Date: 30/03/2009
11
MSSR MODE-S RACK (DOUBLE FRAME)
GENERAL DESCRIPTION
Housed Equipment
Edition: 3 Revision: 0
Date: 30/03/2009
12
MSSR MODE-S RACK (DOUBLE FRAME)
INDEX
01 General Description
Elements and Location
Functional Description
Housed Equipment
02 Description of Elements
Power Distribution Circuit
Power Relay Control (PRC) Unit
Radio Frequency Switch (RRF) Device
Rear Connections (PAN) Panel
DESCRIPTION OF ELEMENTS
Power Distribution Circuit: Block Diagram
TFU1 TFU2
A B C
TPS1 TPS2
MEX 1 MEX2
MVEX1 MVEX2
NTP1 NTP2
TB-1
Edition: 3 Revision: 0
POWER
Date: 30/03/2009
SIGNAL
FRONT AUXILIARY
SOCKET STRIPS
■ Mains signal: 3-phases (380 ACV) + neutral + ground.
■ Socket Strips signal: mono-phase (220 ACV). 14
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Power Distribution Circuit: Description
Edition: 3 Revision: 0
test instruments.
Date: 30/03/2009
The third mono-phase power signal is used to supply power to channel 2
devices places inside right frame, which are the following:
• TFU2, TPS2, MEX2, MVEX2, SWITCH2 and NTP2. 15
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Power Relay Control (PRC) Unit: Front Panel
Antenna Rotation
Control LED & Key
16
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Power Relay Control (PRC) Unit: Description
It is mainly used:
• To distribute the mains power signal (3-phases) between the two frames of the
MSSR Mode S Rack.
• To route the DC voltage and control signals to the RF Switch unit.
It has a front panel, which contains the following elements:
• Three Power Switches, which are called as: A, B and C.
• One Timing Counter, which is used to indicate the number of hours the system
is powered on.
• One Control Key, which is used to control antenna rotation.
Each one of the three Power Switches is associated to one phase of the
Edition: 3 Revision: 0
• A Power Switch: provides a mono-phase power signal to the channel 1
Date: 30/03/2009
devices placed inside left frame.
• B Power Switch: provides a mono-phase power signal to the particular
subsystem devices placed inside any frame of rack and to the front socket
strips of rack frames. 17
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Power Relay Control (PRC) Unit: Front Panel
The Control Key has associated one LED diode, which indicates the
Edition: 3 Revision: 0
This key generates a control signal, which is sent to the
Date: 30/03/2009
Antenna Drive System through one connector of the
MSSR Mode S rack rear panel (PAN).
18
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Radio Frequency Switch (RRF) Device
REAR PART OF
RIGHT FRAME RF Switch
(RRF) Device.
Antenna-Pedestal
RF Connections.
Channel 1 RF
Channel 2 RF
Connections.
Connections.
19
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Radio Frequency Switch (RRF) Device
Date: 30/03/2009
CHANNEL
LOADS 20
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Rear Connections (PAN) Panel
DESCRIPTION OF ELEMENTS
Rear Connections (PAN) Panel
Date: 30/03/2009
connections):
CTRL ANT: It provides the antenna rotation control signal generated by
the PRC unit, to the Antenna Drive System. 22
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Rear Connections (PAN) Panel
Edition: 3 Revision: 0
Main state.
Date: 30/03/2009
• ARP PPI: It provides the ARP signal generated by the Interrogator Channel in
Main state.
23
MSSR MODE-S RACK (DOUBLE FRAME)
DESCRIPTION OF ELEMENTS
Rear Connections (PAN) Panel
Edition: 3 Revision: 0
Date: 30/03/2009
• COM 1 - COM 4: Serial ASTERIX MSSR and Mode S output lines, for sending
data to the ATC. Both channels are connected to each COM port, but only data
from channel in main state are sent.
24
MSSR MODE-S RACK (DOUBLE FRAME)
INDEX
01 General Description
Elements and Location
Functional Description
Housed Equipment
02 Description of Elements
Power Distribution Circuit
Power Relay Control (PRC) Unit
Radio Frequency Switch (RRF) Device
Rear Connections (PAN) Panel
OPERATION
Power ON-OFF Procedures
Power ON procedure:
• Put the A Power Switch of the PRC Unit in ON.
• Put the B Power Switch of the PRC Unit in ON.
• Put the C Power Switch of the PRC Unit in ON.
Edition: 3 Revision: 0
• Put the C Power Switch of the PRC Unit in OFF.
Date: 30/03/2009
26
Systems Engineering
ATM / CNS
Edition: 3 Revision: 0
Madrid Spain
Date: 30/03/2009
F +34 91 627 10 05
www.indracompany.com
27