Professional Documents
Culture Documents
Industrial Gear Oils Gear Oil Ep: (Available in ISO Viscosity Grades of 100,150,220,257,270,320, 460,680 & 1000)
Industrial Gear Oils Gear Oil Ep: (Available in ISO Viscosity Grades of 100,150,220,257,270,320, 460,680 & 1000)
GEAR OIL EP
These are range of high quality gear oils manufactured from selected Base stocks &
blended with lead soap - Sulpher extreme pressure agents. In addition they contain
additives to increase adhesiveness & present film rupture under shock loading conditions.
They are very stable, have high resistance to foaming, good demulsibility characteristics
& fluidity at low temperature.
Velloils EP lubricants 100 are recommended for high speed single & double helical
gear sets utilizing a circulating system for spray lubrication. They are also suitable for
heavily loaded bearings where straight mineral oil do not have sufficiently high film
strength to provide effective lubrication.
Velloils EP lubricant 150 can be used in helical & spur gear sets having peripheral
speeds of 1000/2500 feet per minute & utilizing spray or splash lubrication. Again it
can be used for heavily loaded bearings requiring an oil of this type. This grade has an
extremely good record of satisfactory lubrication of main pinion gears in rolling mills in
the steel industry.
Velloils EP lubricant 220 & 320 can be used for slower speed gears in the 200-
2500 FPM speed range, and worm gears having rubbing speeds in the range 0-2000
FPM. Velloils EP lubricant 460 is recommended for slow heavily loaded worm, spur
and helical gears where exceptional adhesiveness is required and where shock
loading may be problem.
GEAR OIL EP
Typical Specifications
ISO Viscosity 100 115 150 175 220 320 460 680 1000
Appearance Bright, clear, homogeneous liquid
Spcific Gravity 0.86 to 0.91
0
Kin. Vis.Cst @ 40 C 95- 110- 145- 170- 210- 315- 440- 660- 980
105 120 155 180 230 330 480 700 1030
Viscosity Index, 90 90 90 90 90 90 90 90 90
Falsh point,COC, oC 215 220 230 235 240 245 270 280 280
Timken OK Load, lb. 65 65 65 65 65 65 65 65 65
Rust Prevention Pass Pass Pass Pass Pass Pass Pass Pass Pass
General characteristics
Velloils Gear oil ST are competitively priced gear transmission oils fortified to resist
wear, foam and oxidation while delivering long-lasting, responsive performance in light
to moderately heavy duty high-pressure systems. High viscosity indexes (95 and above)
assure consistent response through a wide temperature range.
Velloils Gear oil ST satisfied the following Standard.
* API GL - 2
Application Requirements
Modern high pressure systems require fluids which have lubricity and film strength to
retard wear in pumps, plus the viscosity stability and anti foaming characteristics to
responsively transmit power to cylinders, motors and gears. Since the systems require
passage of the fluid through critical valves, ports, bearings and other small clearances, the
fluids must have high oxidation resistance to avoid formation of gums and varnish. The
fluids must also have good rust resistance and water reparability, to eliminate the effects
of dilution and contamination from reservoirs and cooling tanks.
GEAR OIL ST
Typical Specifications
Grade SAE 90 140
Sp. Gravity, 20oC 0.892 0.899
Viscosity CST, 40oC 196.1 460
Viscosity CST, 100oC 17.5 31.7
Viscosity Index 96 96
Flash point COC, oC 210 240
Fire point COC, oC 235 260
Pour point, oC - 10 - 10
Color, D1500 L 5.0 L 7.0
Velloils EP Gear Oils meet the requirements of the now obsolete US Military
specification MIL - L - 2105.
GEAR OIL EP
Typical Specifications
(Available in ISO viscosity grades of 100, 150, 220, 257, 270, 320, 460, 680 & 1000)
These are range of high quality gear oils manufactured from selected Base stocks
& blended with ashless extreme pressure agents. In addition they contain additives to
increase adhesiveness & present film rupture under shock loading conditions. Contains
friction modifier. They are very stable, have high resistance to foaming, good
demulsibility characteristics, seal compitable & fluidity at low temperature.
Vellopower EP lubricants 100 are recommended for high speed single & double
helical gear sets utilizing a circulating system for spray lubrication. They are also
suitable for heavily loaded bearings where straight mineral oil do not have
sufficiently high film strength to provide effective lubrication.
Vellopower EP lubricant 150 can be used in helical & spur gear sets having
peripheral speeds of 1000/2500 feet per minute & utilizing spray or splash
lubrication. Again it can be used for heavily loaded bearings requiring an oil of this type.
This grade has an extremely good record of satisfactory lubrication of main pinion gears
in rolling mills in the steel industry.
Vellopower EP lubricant 220 & 320 can be used for slower speed gears in the 200-
2500 FPM speed range, and worm gears having rubbing speeds in the range 0-2000
FPM. Vellopower EP lubricant 460 is recommended for slow heavily loaded worm,
spur and helical gears where exceptional adhesiveness is required and where shock
loading may be problem.
VELLOPOWER- EP
Typical Specifications
ISO Viscosity 100 115 150 175 220 320 460 680 1000
Appearance Bright, clear, homogeneous liquid
Spcific Gravity 0.86 to 0.91
Kin. Vis.Cst @ 40 0C 95- 110- 145- 170- 210- 315- 440- 660- 980
105 120 155 180 230 330 480 700 1030
Viscosity Index, 90 90 90 90 90 90 90 90 90
o
Falsh point,COC, C 215 220 230 235 240 245 270 280 280
Timken OK Load, lb. 65 65 65 65 65 65 65 65 65
Rust Prevention Pass Pass Pass Pass Pass Pass Pass Pass Pass