RCA TO IP-BUS INTER CONNECTEUR
INTER CONNECTOR RCA A IP-BUS
CD-RB2O
OWNER’S MANUAL
MODE D’EMPLOI
‘Thank you for purchasing this PIONEER product. Before
attempting operation, be sure to read this manual.
Nous vous rermercions'd’avoir acheté cet appareil
PIONEER. Avant de I'utiliser, prendre soin de lire ce
manuel.
Vielen Dank fiir den Kauf dieses PIONEER Produkts, Diese
Bedienungsanleitung vor der Inbetriebnahme sorgfaitig
durchlesen.
Muchas gracias por la adquisicién de este producto
PIONEER. Antes de tratar de operarlo, lea atentamente
este manual.
Grazie per aver acquistato questo prodotto PIONEER.
Legere attentamente queste istruzioni prima di usare
questa unit,
@Q PIONEER’
The Art of Entertainment WG
<94K00FOGO1>
EFig. 1 Abb. 1
This product is an RCA/IP-BUS converting con-
nector designed to be used to connect devises
with RCA output (car navigation units, VCRs,
DAT decks, etc.) to the IP-BUS main unit.
Installation
+ Before finally installing the unit, connect the
wiring temporarily and make sure the unit
and the system work properly.
Location
+ Install the unit where it does not get in the
driver's way and cannot injure a passenger
if there is a sudden stop, like an emergency
stop.
+ Do not mount the player near the heater out-
let, where it would be affected by heat, or
near the doors, where rainwater might
splash onto it.
Installing the unit
Mounting with Velcro tapes
(Fig. 1)
(1 Car mat
[2] Velcro tape
Attach Velcro tape to the bottom of the
unit and the carpet of the vehicle.
In case of trouble
When the unit does not operate properly,
contact your dealer or the nearest autho-
rized PIONEER Service Station.
Specifications
Power source
sess. 14.4V DC (10.8 — 15.6 V allowable)
Grounding system ... . Negative type
Max. current consumption .... 50 mA
Maximum rated input level ...... 2 WV
Dimensions ...... 84 (W) x 30 (H) x 87 (D) mm.
Weight ..... fees ade eee e st OOO g:
Note:
Specifications and the design are subject to
possible modification without prior notice due
to improvements.Fig. 2 Abb. 2