Professional Documents
Culture Documents
Manufacured in China
Manufacured in China
版本Version: 01
日期Date: 2018年2月27日
质量控制部
Quality Control Department
注意:
1、如无特殊说明,轴类及锻件超声及磁粉探伤按照JB/T5000.15 3级探伤进行检验;铸件超声及磁粉探伤按照GB/T7233-2009 3级
执行;焊缝类UT GB/T11345-1998 BⅡ级执行, DP/MP按照 JB/T4730.4-2005 Ⅱ级执行
2、所有铸件壳体、轴承座外观要进行严格把控,不允许有明显外观缺陷,不允许有打腻子现象发生
3、焊缝要均匀饱满,融合良好,无明显咬边、焊瘤、焊渣、飞溅等缺陷
4、壳体拆分件,要根据标准要求开坡口
5、外观要求,下料及机加工要杜绝毛边毛刺,火焰切割面要打磨干净
6、喷砂喷漆要严格按照合同要求进行
Project 工程名称: ×××××××××××××
Tianjin Cement Industry Design and Research institute Co.,Ltd
Quality Control Plan(QCP) Plant Department 车间名称:
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Kiln Shell 窑筒体
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1. Raw Material Certificates and recheck report 原材料材质证明、复查报告
DP Dye Penetrant 着色探伤 2.Ultrasonic Test Report 超声波探伤报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.Dimension Inspection Report 尺寸检查报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Checking of material 材料检查 CA+MT+UT A+1 100% CC+CR
Cutting,Belding and Welding
2 VC+DIM+UT A+1 100%
下料、卷制、焊接
3 Single Section Machining单段节加工 VC+DIM 1 100%
Big Section Joint Welding UT 100% check on the welding seams as per GB11345-1989.
4 VC+DIM+UT A+1+2 100% CR
大段节组对焊接 UT 100%按照GB11345-1989的BⅡ级
Big Section Machining
5 VC+DIM A+1+2 100% CR DIM as per drawings 按照图纸
大段节机加工
根据合同规定的包装方案
7 Packing 包装 VC A+1 100%
As per the packing plan stated in the contract
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Support roller(casting type)
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 铸造托轮 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1.CA and MT report 化学成分分析及机械性能测试报告
DP Dye Penetrant 着色探伤 2.Heat Treatment Report 热处理报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.UT and MP Report 超声波和磁粉探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Dimension Inspection Report 尺寸检查报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号: 5.Hardness Inspection Report 硬度检查报告
SC Special Control 特殊控制 3=Owner/representative 业主代表 6.Roughness Inspection Report 粗糙度检查报告
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Casting 铸造 CA 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Thrust roller (Casting type)
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 挡轮(铸造结构) Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1.CA and MT report 化学成分分析及机械性能测试报告
DP Dye Penetrant 着色探伤 2.Heat Treatment Report 热处理报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.UT and MP Report 超声波和磁粉探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Dimension Inspection Report 尺寸检查报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号: 5.Pressure Test Report 压力测试报告
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Casting 铸造 CA 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Support Roller Shaft and Thrust
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 Roller Shaft 托轮轴、挡轮轴 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1.Thermal Treatment Reports 热处理报告
DP Dye Penetrant 着色探伤 2.CA and MT Reports化学成分分析及机械性能测试报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.UT、MP Reports 超声波、磁粉探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Dimension Inspection Report 尺寸检查报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号: 5.Hardness Inspection Report 硬度检查报告
SC Special Control 特殊控制 3=Owner/representative 业主代表 6.Roughness Inspection Report 粗糙度检查报告
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Forging 锻造 VC+CA 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Pinion and Pinion Shaft
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 小齿轮、小齿轮轴 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1.Thermal Treatment Reports 热处理报告
DP Dye Penetrant 着色探伤 2.CA and MT Reports化学成分分析及机械性能测试报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.UT、MP Reports 超声波、磁粉探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Dimension Inspection Report 尺寸检查报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号: 5.Hardness Inspection Report 硬度检查报告
SC Special Control 特殊控制 3=Owner/representative 业主代表 6.Roughness Inspection Report 粗糙度检查报告
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Forging 锻造 VC+CA 1 100% CC
2 Thermal Treatment热处理 TT+MT 1 100% MT:hardness test 硬度检查
6 Anti-Corrosion防腐处理 VC 1 100%
7 Packing包装 VC 1 100%
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Girth Gear (Casting type)
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 大齿圈(铸造结构) Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1.Thermal Treatment Reports 热处理报告
DP Dye Penetrant 着色探伤 2.CA and MT Reports化学成分分析及机械性能测试报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.UT、MP Reports 超声波、磁粉探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Dimension Inspection Report 尺寸检查报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号: 5.Hardness Inspection Report 硬度检查报告
SC Special Control 特殊控制 3=Owner/representative 业主代表 6.Roughness Inspection Report 粗糙度检查报告
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Casting 铸造 CA 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: bearing bush and convex sphere
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 衬瓦、球面瓦 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 1. Raw Material Certificates 原材料材质证明
DP Dye Penetrant 着色探伤 2.Dimension Inspection Report 尺寸检查报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号: 3.Dye Penetrant Report 着色探伤报告
UT Ultrasonic Test 超声波探伤 1=Supplier供货方 4.Pressure Test Report 压力测试报告
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
Material of Convex Sphere
1 VC+CA+MT 1 100% CC
球面瓦材质
Water Pressure Test for Convex Sphere SC:0.6Mpa keep at least 10 minutes, no leakage allowed.
4 VC+SC A+1+2 100% CR
球面瓦水压试验 0.6MPa保压10分钟,球面瓦和管路系统各处应无渗漏
5 Anti-Corrosion防腐处理 VC 1 100%
根据合同规定的包装方案
6 Packing包装 VC 1 100%
As per the packing plan stated in the contract
Type of Control 控制类型 Documents 文件 Equipment 设备名称: 回转窑 Rotary Kiln Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Kiln Inlet and Outlet heat
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 resistace plate、bearing house Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号: 窑头、窑尾护板,轴承座及瓦座 1. Raw Material Certificates 原材料材质证明
DP Dye Penetrant 着色探伤 2.Dimension Inspection Report 尺寸检查报告
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum of
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 Check Criteria 执行标准
日期 报告
检查比例
1 Casting 铸造 VC+CA+DIM 1 100% CC
根据合同规定的包装方案
4 Packing 包装 VC A+1 100%
As per the packing plan stated in the contract
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chemistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test运转测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械性能 设备: 辊压机
VC Vision check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension inspection尺寸检查 C=certificate合格证 供货商: Date: Revision
TT Heat treament热处理 A=control point控制点 Part designation: frame 版本
DP Color up penetrate test着色探伤 部件名称: 支架
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultrasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
1 material CA 1 CC
2 weding VC 1 CR
3 machining DIM 1
4 assemble VC+DIM 1 CR
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chemistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test运转测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械性能 设备: 辊压机
VC Vision check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension inspection尺寸检查 C=certificate合格证 供货商: Date: Revision
TT Heat treament热处理 A=control point控制点 Part designation: roller sleeve 版本
DP Color up penetrate test着色探伤 部件名称: 辊套
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultrasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chenistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test连续测试 CC=certificate/C合格证 Equipment: roller press
MT Machinery test机械测试 设备: 辊压机
VC Surface check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension insepect空间检查 C=certificate合格证 供货商: Date: Revision
TT heat treament热处理 A=control point控制点 Part designation: shaft 日期 版本
DP Color up penetrate test着色探伤 部件名称: 轴
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chenistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test连续测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械测试 设备: 辊压机
VC Surface check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension insepect空间检查 C=certificate合格证 供货商: Date: Revision
TT heat treament热处理 A=control point控制点 Part designation: bearing housing 日期 版本
DP Color up penetrate test着色探伤 部件名称: 轴承座
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chenistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test连续测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械测试 设备: 辊压机
VC Surface check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension insepect空间检查 C=certificate合格证 供货商: Date: Revision
TT heat treament热处理 A=control point控制点 Part designation: Torque plate 日期 版本
DP Color up penetrate test着色探伤 部件名称: 扭矩板
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chenistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test连续测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械测试 设备: 辊压机
VC Surface check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension insepect空间检查 C=certificate合格证 供货商: Date: Revision
TT heat treament热处理 A=control point控制点 Part designation: Complete machine 日期 版本
DP Color up penetrate test着色探伤 部件名称: 整机
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chenistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test连续测试 CC=certificate/C合格证 Equipment: Roller press
MT Machinery test机械测试 设备: 辊压机
VC Surface check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension insepect空间检查 C=certificate合格证 供货商: Date: Revision
TT heat treament热处理 A=control point控制点 Part designation: Other 日期 版本
DP Color up penetrate test着色探伤 部件名称: 其它
Observatio
MP Magnetism powder test磁性粒子检测 Participants 参与方
Specification ref: ns: 观察报告
UT Ultasonic test超声波检测 1=Supplier供货方 规格型号:
RD Radar detectX光照相术 2=TCDRI Item number:
SC Special control特殊控制 3=Owner/representative 业主代表 设备号:
2 moter 电机 CC A+1 CC
3 bearing轴承 CC 1 CC
1 check on material原料检查 CA 1 CC
2 welding焊接 DIM 1 CR
4 check on packing包装检验 VC 1 CR
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chemistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test运转测试 CC=certificate/C合格证 Equipment: Preheater
MT Machinery test机械性能 设备: 预热器
VC Vision check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension inspection尺寸检查 C=certificate合格证 供货商: Date: Revision
inner chute of
TT Heat treament热处理 A=control point控制点
Part designation: preheater/ dip 日期 版本
DP Color up penetrate test着色探伤 部件名称: 内筒
MP Magnetism powder test磁性粒子检测 participants参与方 Specification ref: Observations:
观察报告
UT Ultrasonic test超声波检测 1=supplier供货方 规格型号:
RD Radar detectX光照相术 2=Owner/representative 业主代表 Item number:
SC Special control特殊控制 设备号:
reference equipment drawing number.
manufacturing operations制造控制 interventions 干预
n°phasis operations制造内容 controls控制 participants参与方 date日期 report n° remarks标注
1 check on material原料检查 CA 1 CR
3 Packing 1
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程: ×××××××××××××
质量控制计划
type of control控制类型 documents文件 Plant department:
CA Chemistry analyzed化学分析 CR=control report控制报告 车间:
RT Run test运转测试 CC=certificate/C合格证 Equipment: Preheater
MT Machinery test机械性能 设备: 预热器
VC Vision check表面测试 Inspection content检查内容 Supplier: Q.C.P ref
DIM Dimension inspection尺寸检查 C=certificate合格证 供货商: Date: Revision
TT Heat treament热处理 A=control point控制点
Part designation: anger 日期 版本
DP Color up penetrate test着色探伤 部件名称: 扒钉
MP Magnetism powder test磁性粒子检测 participants参与方 Specification ref: Observations:
观察报告
UT Ultrasonic test超声波检测 1=supplier供货方 规格型号:
RD Radar detectX光照相术 2=Owner/representative 业主代表 Item number:
SC Special control特殊控制 设备号:
reference equipment drawing number.
manufacturing operations制造控制 interventions 干预
n°phasis operations制造内容 controls控制 participants参与方 date日期 report n° remarks标注
1 check on material原料检查 CA 1 CR
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Boom Belt
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 皮带悬架 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC+CR
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Beam
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 梁 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Rake Structure
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 料耙 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC+CR
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
Central Column
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称:
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 中柱 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC
根据合同规定的包装方案
9 Packing 包装 VC A+1 100%
As per the packing plan stated in the contract
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: shaft
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 轴(包括链轮轴及车轮轴) Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: rolor and wheel
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 车轮+链轮 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
1 Checking Material 原材料检查 CA+MT 1 100% CC
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Stacker and Reclaimer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 堆取料机 2018.02.27
RT Run Test 试车测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Mechanical Property Test 机械性能测试
VC Visual Inspection 外观检查 Inspection Content 检查内容 Part Designation 部件名称: Hydraulic & lubrication system
DIM Dimension Inspection 尺寸检查 C=Witness Point 见证点 润滑及液压系统 Observations 观察报告
TT Thermal Treatment 热处理 A=Control Point 控制点 Drawing Number 图号:
DP Dye Penetrant 着色探伤
MP Magnetic Particles Test 磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic Test 超声波探伤 1=Supplier供货方
RD Radiographic Inspection 射线探伤 2=TCDRI Item Number 设备号:
SC Special Control 特殊控制 3=Owner/representative 业主代表
Quantum
Date Report
No.序号 Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
日期 报告
检查比例
Run test for 1 hour, no leakage. Pressure test at the rated
pump pressure. 在泵的额定压力下试验一个小时无泄漏。
1 Function Test 功能测试 VC+RT+SC A+1+2 100% CR Welding qualification and cleanlily for Oil Station
焊接质量和油箱内的清洁程度
Check temperatures+noise level 测试温度, 噪音
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Process valve, two-way valve etc. Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 工艺阀门 2018.02.27
RT Run test运转测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Machinery test机械性能
VC Vision check外观检查 Inspection content检查内容 Part Designation 部件名称:
DIM Dimension inspection尺寸检查 C=certificate合格证 Observations 观察报告
TT Heat treament热处理 A=control point控制点 Drawing Number 图号:
DP Color up penetrate test着色探伤
MP Magnetism powder test磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic test超声波探伤 1=Supplier供货方
RD Radar detectX射线探伤 2=TCDRI Item Number 设备号:
SC Special control特殊控制 3=Owner/representative 业主代表
n°phasis operations制造内容 controls控制 participants参与方 date日期 report n° remarks标注
2 welding DIM 1
4 run-test RT A+1+2 CR
5 painting VC A+1+2 CR
Type of Control 控制类型 Documents 文件 Equipment 设备名称: Air Compressor and dryer Date 日期
CA Chemical Analysis 化学成分分析 CR=Control Report 控制报告 空压机及冷干机 2018.02.27
RT Run test运转测试 CC=Certificate/C 合格证 Supplier 供货商:
MT Machinery test机械性能
VC Vision check外观检查 Inspection content检查内容 Part Designation 部件名称:
DIM Dimension inspection尺寸检查 C=certificate合格证 Observations 观察报告
TT Heat treament热处理 A=control point控制点 Drawing Number 图号:
DP Color up penetrate test着色探伤
MP Magnetism powder test磁粉探伤 Participants 参与方 Specification 规格型号:
UT Ultrasonic test超声波探伤 1=Supplier供货方
RD Radar detectX射线探伤 2=TCDRI Item Number 设备号:
SC Special control特殊控制 3=Owner/representative 业主代表
Quantum
No.序 Date Report
Operations 制造内容 Controls 控制 Participants 参与方 of Check Criteria 执行标准
号 日期 报告
检查比例
1 Checking of Material 原材料检查 CA+MT 1 100% CC
3 Water pressure test SC A+1 CR+CC SC: means water pressure test
Sandblasting and Painting As per the painting specification stated in the contract
5 VC A+1+2 100% CR
喷砂、喷漆 按照合同规定的喷涂方案
根据合同规定的包装方案
6 Packing 包装 VC A+1 100%
As per the packing plan stated in the contract
Project : ×××××××××××××
QUALITY CONTROL PLAN (Q.C.P)
工程名称: ×××××××××××××
质量控制计划
尺寸精度检查 (DPI) 符合性检验 (CI) CR=Control report 控制报告 设备名称: MV MOTORS Date:日期: Revision 版本
主轴探伤 (PT) 外观结构检验 (VI) CC=Certificate/C 合格证 Supplier:
机械特性检验 (MI) 供货厂商:
电气测试 (ET) Part designation:
耐压测试 (DT)Inspection content检查内容 部件名称:
绝缘测试 (IT)C=Certificate 合格证 Drawing number:
=Control point 控制点
接地回路检验 (ECIA) 图号: Observations:
观察报告
接线正确性检查(WI) Specification ref:
动平衡测试 (BT) participants 参与方 规格型号:
1=Supplier 供货方
噪声、震动测试(BVT) Item number:
直流电阻测试 (DRT2=sinoma-tcdri
) 天津院 设备号:
manufacturing operations 制造控制 interventions干预
n°phasis operations 制造内容 controls 控制 participants 参与方 date 日期 report n° remarks 标注
1 supply order and drawing conformity checking 1 CR
供货与合同和图纸的一致性检查
2 resistance value of winding 2+1
measurement at ambient temp CR
环境温度下,绕组的电阻测量
3 winding temperature value measurement 2+1 CR
and bearing shell temperature value cooling
绕组和轴承的温升测量
4 turning field locating and direction of 2+1 CR
rotation way (terminal locating)
指示方向与旋转方向检查
5 off-load losses ,off-load current and 2+1 CR
off-load voltage measurements
空载损耗、空载电流、空载电压的测量
6 Locked-rotor test 2+1 CR
堵转试验
7 insulation tests 2+1 CR
绝缘测试
8 over-voltage tests at 2U+1000volts 2+1 CR
2U+1000V耐压测试
9 general mechanical checking 2+1 CR
常规设备检查
10 noise level 1 CR
噪音测量