Professional Documents
Culture Documents
Glass Beeads Class Potters
Glass Beeads Class Potters
PRODUCT SCOPE
Cataphos Glass Beads TYPE (ii) is Reflective glass beads, these beads are
especially made for use in road marking paints and thermoplastics to provide
excellent night retro-reflective.
PRODUCT COMPOSITION
Cataphos Glass Beads TYPE (ii) is manufactured under AASHTO M247 TYPE II:
with following properties:
TECHNICAL INFORMATION
Round, clean, transparent & free of bubbles & foreign
Appearance
matters
Specific Gravity 2.40~2.60g/cm3
Index of refraction: 1.5
Spherical beads >70%
Sieve Analysis
MESH size (μm) Percent passing (%)
600 μm 100%
425 μm 90~100%
300 μm 50~75%
180 μm 0~5%
SURFACE PREPARATION
Road surface should be dry & free from mud, sand, oil, foreign matter or any other loose
substrate or material. When lying on old film check the existing paint is fit. If not then it should
be removed prior to new lying.
Page 1 of 2
o As long as container is firmly sealed and stored under recommended storage conditions,
product can be used within 06-Months of manufacturing date without deterioration.
FIRST AIDS
SPILLAGE HANDLING
Page 2 of 2