Professional Documents
Culture Documents
User Data Edit and Update 1 Sat Edit Interface
User Data Edit and Update 1 Sat Edit Interface
○
1 Article tools operating instructions.
We can operate file, edit satellite or TP.
○
2 Select serial port.
If we connect machine to PC, the edit tool will auto check the serial Port. Please
select the correct serial port.
○
3 read data
If we click the button, the tool will down load data from machine.
○
4 write data
If we click the button, the data will up load to machine.
○
5 data file bar
Display the current data file address.
○
6 satellite and TP selection box
○
7 satellite and TP NUM indicate
○
8 satellite edit
Satellite Parametric Edit, edit the satellite then press ok button to save.
○
9 TP edit
TP Parametric edit, edit the TP then press ok button to save.
○
10 Tool operation progress bar
2 RS232—USB drive.
1, connect machine to PC. Note: we must connect machine then open tool, then press serial Port
button to select the correct port.
2, select file>open file, select the data from “userdata” file. Example: Europe.csv. Note if the
satellite number more than 100, will omit
3 edit the data, then open machine, click “write data”, the data will up load to machine
Note: now tool don’t support Satellite sorting, please edit in office excel tool, then load it
4 read data
Refer to write data, please click read data, the file will load from the machine.