Professional Documents
Culture Documents
Studio 3 Process Help: Click Here
Studio 3 Process Help: Click Here
Introduction
Notes
Example
Errors
Introduction
How to use
The perimeters are either on horizontal benches or on vertical sections, parallel to the axes of the model. The starting perimeter, the
distance between perimeters and the number of perimeters are defined by parameter. All perimeters are open and clockwise for
perimeters surrounding model cells. For empty areas (voids), perimeters are created to isolate the void, and then linked to the non-void
zone.
More specifically, If a set of cells completely surrounds a void then this is dealt with by creating an anti-clockwise perimeter around the
void. This is then linked to the enclosing clockwise perimeter with a two-way bridge of zero width.
More than one perimeter will be created for each plane if there are disjoint groups of cells.
Input Files
Output Files
Parameters
mk:@MSITStore:C:\Program%20Files%20(x86)\Datamine\Studio3\Help\DatamineStu... 7/03/2019
blkper Page 2 of 3
Controls perimeter
generation (0):
Option Description
Join cell
0
SMOOTH corners; No 0 0,1 0,1
Join the
midpoints of cell
1 sides in order to
smooth the
outline.
Option Description
Do not connect
internal and
0 external
perimeter
CONNECT connections. No 1 0,2 0,2
Connect internal
perimeters to
1 external
perimeters as a
single perimeter.
Create only
2 internal
perimeters.
Notes
No additional notes.
Example
!BLKPER &IN(FEMODEL), &OUT(PERIMS), @DIRECT=1, @STARTPOS= -45, @STEPSIZE=10, @NUMPLANE=10, @SMOOTH=0, Fe>46
mk:@MSITStore:C:\Program%20Files%20(x86)\Datamine\Studio3\Help\DatamineStu... 7/03/2019
blkper Page 3 of 3
mk:@MSITStore:C:\Program%20Files%20(x86)\Datamine\Studio3\Help\DatamineStu... 7/03/2019