Professional Documents
Culture Documents
Bundle Instructions
Bundle Instructions
Bundle Instructions
STEP 2: Rub the top of the transfer sheet firmly against the
decal with your finger, a rubber squeegee, or a credit card to
ensure it is completely adhered to the decal.
STEP 3: Carefully peel the clear transfer sheet from the white
backing paper. The decal should stick to the clear transfer paper.
Matte, Satin, & Gloss decals adhere really well, but Carbon
Fiber, Matrix, & Brushed vinyl need to be peeled very carefully
to ensure they stick. If the vinyl begins to lift from the transfer
paper, try peeling from a different angle. The top “arc” piece is
very fragile, so take extra care with it.
STEP 4: Present the decal to the emblem on the car. Use the
bottom point of the “V" at the top of the decal as your 1st
alignment point. Then use the bottom point of the decal as your
2nd alignment point. Once you are satisfied with the alignment,
lightly touch the decal to the emblem Align (1st)
so it barely sticks. Inspect to ensure
there is a uniform amount of silver
showing around the perimeter of the
decal. If it needs to be re-aligned,
gently lift the transfer tape and decal
and realign it to the proper location.
(2nd)