Professional Documents
Culture Documents
JP CombiChem GB
JP CombiChem GB
C e n t r i f u g a l p u m p s a c c o r d i n g t o I S O 519 9 a n d I S O 2 8 5 8 / E N 2 2 8 5 8 ( D I N 2 4 2 5 6 )
The SPX Johnson Pump Combi system
CombiChem – No limits to reliability!
is a modular programme of single stage
The Combi pumps cover an extensive series chemical industry. It is one of the most outstanding pump types of the
Combi-system. The Combi-system is a modular programme of single stage
of centrifugal pumps which can be supplied
centrifugal pumps with a high degree of interchangeability of parts between
as horizontal, vertical and submerged
the different pump constructions.
pumps. A number of standards were taken
into account in the designing of this pump CombiChem represents a range of horizontal centrifugal pumps, designed to
ISO 2858 / EN 22858 (DIN 24256), suitable for handling low viscosity, clean
series; EN 733 (DIN 24255), EN 22858
or slightly contaminated liquids.
(ISO 2858 / DIN 24256), ISO 5199 and
API 610. The design of CombiChem complies entirely to ISO 5199. The CombiChem
offers a great variety of possible shaft sealings, bearing constructions and
also a wide range of different materials, such as stainless steel, bronze,
nodular cast iron or cast iron.
www.spxflow.com
J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6
Typical product applications
From know-how to
finding solutions
Chemical Industry
K E Y F E AT U R E S The CombiChem is, as the
• Suitable for a wide range of duties name says, perfectly suited
• Available in several materials for operation in chemical
• Only 4 bearing brackets for the whole range industries. The pump has
been designed entirely
• Mechanical seals according to EN 12756 (DIN 24960)
according to ISO 5199. The
• Single and double cartridge seals
ISO 5199 standard defines
• Back Pull Out principle important technical details of
• Pump cover options for cylindrical bore and tapered bore centrifugal pumps according
to ISO 2858 / EN 22858
(DIN 24256), used in
chemical industries.
General Industry
CombiChem’s availability
in several materials, the
ample choice of shaft
TA P E R E D B O R E S E A L
sealing options and the rigid
CHAM B E R OPTION
bearing construction makes
The CombiChem pumps offer a tapered it a very reliable pump for
bore seal chamber option to improve the general industrial purposes.
service life of the mechanical seal. Complying to ISO 2858,
ISO 5199 and EN 22858
The conical seal chamber diverts solids (DIN 24256): CombiChem
and slurry away from the mechanical seal offers you the best solution.
and provides for better cooling of the seal
which will increase the life of the seal.
tapered bore seal
Ribs in the chamber effectively disrupt
ch a m b e r o p t i o n
any vortex formation.
J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6 3
Features and Benefits
I M P E L L E R BAC K VA N E S
• flat cover for hydraulic balancing
• back vanes for hydraulic balancing
• extended bearing life
• keeps solids away from shaft sealing area
M AT E R I A L O P T I O N S
• available in cast iron, nodular • circulation flow over mechanical seal
cast iron, bronze and stainless
steel and other materials, such
as duplex, upon request
S U CTI ON
• suitable for a wide range of
CA PA B I L I T I E S applications
• smooth suction entry in
pump casing
• smooth surface
• optimum NPSH
• anti rotation vane
• minimal flow distortion
giving better suction
capabilities
I M PE LLE R
• closed impeller with casing wear ring
• half-open impeller with wear plate
P U M P CA S I N G
• flanges according to ISO 7005 PN 16 or ISO
7005 PN 20 (ANSI B16.5 150 lbs)
• max. working pressure 16 bar
• wide range of applications
• large drain opening
• complete and fast draining of the casing
I M P E L L E R LO C K I N G
• stainless steel impeller cap F OOT
nut with flat gasket
• machined foot
• reliable locking
• exact positioning on baseplate and in
pipework
4 J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6
S HAFT S EALI NG S HAFT
• 7 possible mechanical EN-seal, plus cartridge seal • stainless steel or steel alloy
options
• shaft deflection local to the
• sealing rings and elastomers in several possible shaft seal stays within FORCE S AN D
combinations 0,05 mm
MOM E NTS
• sealing cover with quench and flush connections • prolonged seal life • the permissible forces
• 3 possible gland packing options e.g. with cooling • rigid, reliable shaft and moments comply with
cover the curves represented in
• shaft sleeve (extended impeller ISO 5199
• suitable for many applications key ensures co-rotation of the
shaft)
• suitable for many liquids
• ‘dry’ shaft: no contact between
• also suitable for high temperatures
shaft and pumped liquid
• Tapered bore seal chamber with or without flush
plan
O I L L U B R I CAT I O N PU M P
• breather / filling plug on top PE R FOR MANCE
• oil bath • optimised volute design
• oil sight glass • high efficiency
• constant level oiler • smooth surfaces
• large drain plug • minimal internal losses
• closed impeller, half-open
impeller with wear plate
• wide variety of applications
B EAR I NG S
• bearing life is at least 17,500 hours for the
entire Q-H curve up to 1.25 QBEP
• extended MTBF E A SY A N D L OW C O S T
• oil bath lubricated or grease lubrication MAI NTE NANCE
• bearing lock-up by means of shaft nut with • Back Pull Out principle
lock washer
• reduced maintenance
• very reliable bearing lock-up downtimes, quick and easy
impeller replacement
• rigid cast iron bearing bracket construction
• all gland packing options
• minimum bearing movement
with shaft sleeve
• machined fits
• no shaft damage from
• exact alignment packing
• adjustable bearings • mechanical seals according
to EN 12756 (DIN 24960)
• clearances for half-open impeller and wear
plate can be adjusted • reduced maintenance costs
• changeable wear ring
PU M P COVE R • reduced maintenance costs
• flat gasket, fully chambered
• no gasket blow-out
• machined fits
• perfect alignment of all components
• integrated stuffing box/mechanical seal chamber with cylindrical bore
t a p e r e d b o r e s e a l ch a m b e r o p t i o n
• fewer parts
• integrated pump cover with tapered bore seal chamber with flow-guiding ribs
• optimize seal life through improved heat dissipation
J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6 5
Shaft sealings
M E C H A N I CA L S E A L O P T I O N S :
M 2 M G 12 / M 7 N M 3 H J 9 2 N / H J 977 G N M Q 2 M G 12 / M 7 N M Q 3 H J 9 2 N / H J 977 G N
single mechanical seal single mechanical seal single mechanical seal, single mechanical seal, dry-
unbalanced balanced dry-running protection running protection or pressure-
or pressure-less quench, less quench, balanced
unbalanced
M W 2 M G 12 / M 7 N M W 3 H J 9 2 N / H J 977 G N CA R T R I D G E S E A L S
single mechanical seal, single mechanical seal, cooling/ single, single with quench
cooling/heating jacket, heating jacket, balanced and double cartridge seals
unbalanced
G L A N D PAC K I N G O P T I O N S :
S2 S3 S4
stuffing box with shaft stuffing box with shaft stuffing box with shaft
sleeve sleeve and lantern ring sleeve, and cooling cover
6 J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6
Technical data
Max. capacity 800 m3/h
Q Q
[m3/h]
[m3/h]
3000 rpm 15 0 0 r p m
160 100
80 150-400
120 70 100-400
125-400
32-250 40-250 50-250 65A-250 80-250 60
80-400
100 50 65-315 150-315
40A-315 50-315 80-315
80 40 100-315 125-315
70 32-200 40C-200 65C-200 80-2
80C-200 30 50
32-160 32C-200 50C-200 32-250 40-250 50-250 65A-250 100C-250
60 25 80A-250 125-250
65 10 20 25
0-2 0-20
50 C- 20 0C
H 25-160 16 H 32-200 40C-200 65C-200 -2 00 0
0 80C-200 00
[m] 32C-160 40C-160 50C-160 [m] 15 32-160 32C-200 50C-200
40 32A-160 65
80C-160 25-160
C-
16
0
32C-160 40C-160 50C-160
10 32A-160
30 80C-160
8
25
25-125 32-125 32C-125 50C-125 65C-125 7
40C-125 6 25-125 32-125 32C-125 50C-125 65C-125
20 40C-125
5
4
15
3
10 2
4 5 6 7 8 10 15 20 30 40 50 60 80 100 150 200 250 350 2 3 4 5 6 7 8 10 15 20 30 40 5060 80100 150 200 300 400 600 800
Q
3600 rpm 18 0 0 r p m Q
[m3/h]
[m3/h]
Subject to alterations
J P _ 4 1 4 _ G B V E R S I O N : 0 3 / 2 01 6 I S S U E D : 0 3 / 2 01 6 7
CombiChem
Centrifugal pumps
according to ISO 5199 and
ISO 2858 / EN 22858 (DIN 24256)
Bearing
The CombiChem has two bearing arrangements:
1. two deep-groove ball bearings (grease lubricated “sealed for life”)
2. a double-row (two single – bearing group 4) angular contact ball bearing in combination with a roller bearing
2 2
2
2
Oil lubrication
adjustable
S PX F LO W T E C H N O L O GY A S S E N B . V.
SPX FLOW, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed
in writing. Please contact your local sales representative for product availability in your region. For more information visit www.spxflow.com and www.johnson-pump.com.
The green “>” is a trademark of SPX FLOW, Inc..
JP_414_GB Version: 03/2016 Issued: 03/2016
COPYRIGHT © 2016 SPX FLOW, Inc.