Professional Documents
Culture Documents
Hta (Halfen Deha)
Hta (Halfen Deha)
Page
1
Item
1
The design - including the static values - does only apply to the designated HALFEN product. The
load bearing capacity of third party products, appearing to be identical in construction, might
differ. For this reason, the software provider does not extend warranty if external products are
used.
Input data
Anchor channel HTA-CE 52/34 - FV - 800 / 4, 4 anchors
Channel bolt HS 50/30 M 16 FV 4.6
Approval / Design method CEN/TS 1992-4, ETA-09/0339
Shear force without lever arm
Concrete C30/37, cracked
Reinforcement no dense reinforcement
edge reinforcement no edge reinforcement
NEd,1
h
l
xs1
VEd,1
© HALFEN GmbH, Langenfeld, Germany
h = 200 mm l = 800 mm
cnom = 20 mm
HTA 2.50
22/02/2018
Project ProNo. Page
2
Item
1
Calculation Summary
Verifications:
Steel
Channel bolt
Maximum tension load (bolt): Bolt 1
NRk,s,s [kN] Ms NRd,s,s [kN] NEd [kN] N
HTA 2.50
22/02/2018
Project ProNo. Page
3
Item
1
Flexure of channel
Decisive span between anchors 2 and anchors 3
30 400
2 2
NEd [kN] N VEd [kN] V N + V
Concrete
HTA 2.50
22/02/2018
Project ProNo. Page
4
Item
1
25.7 1
N0Rk,c [kN] scr,N [mm] s,N ccr,N [mm] e,N c,N re,N ucr,N
s,N(cp) k5
0.77 2
Combined loading
most unfavourable anchor: 1, load position xs1 = 35 mm
VRk,cp [kN] Mcp VRd,cp [kN] VEd [kN]
K5 NRk,c [kN]
© HALFEN GmbH, Langenfeld, Germany
2 86.87
1,5 1,5
N V N + V
HTA 2.50
22/02/2018