Professional Documents
Culture Documents
Soncni Kolektorji Katalog 2004 Ang
Soncni Kolektorji Katalog 2004 Ang
Technical data 6
Wooden crate CPC OEM 8
One-way transportation pallet CPC OEM 8
Connection kit CPC SPEED OEM 8
Connection kit CPC OEM 8
Roof mounting kit for evacuated tube collector CPC OEM 8/9
Flat roof / wall mounting kit for evacuated tube collector CPC OEM 9
Spare parts for evacuated tube collector CPC OEM 9
Technical data 10
One-way transportation pallet CPC w OEM 11
Connection kit CPC w OEM 11
Roof mounting kit for evacuated tube collector CPC w OEM 11
Flat roof / wall mounting kit for evacuated tube collector CPC w OEM 11
Spare parts for evacuated tube collector CPC w OEM 12
Accessories
Solar controller AS 65 13
Filling and rinsing station 14
Sales support
Tube hand sample 15
Collector model 15
Tube case 15
Ritter Solar evacuated tube collectors are mass-produced products made in Baden-Württemberg. Their outstanding design,
professional finishing, top quality and high energy yield, as well as their excellent price/performance ratio make them stand
out. High-quality, corrosion resistant and tested materials ensure smooth operation over a long useful life. The well-known
indestructibility of Ritter solar tubes was confirmed by positive test results in the impact-from-hail test according to DIN EN
12975-2 and the thermal shock test (ITW test report No. 02COL 282).
The evacuated tube collector CPC OEM was developed especially for
solar domestic water heating and for solar backup space heating. The
low pressure loss allows several modules to be connected in series.
The aperture area measurements of 1.0, 2.0 and 3.0 m2 allow accurate
adjustment to water and/or space heating requirements. We also paid
careful attention on details which are important for mounting the
system: the solar installation is delivered with a tentered sun protection
sheet to allow putting the system into operation even during maximum
solar irradiation. Hand straps which can be attached to the collector
frame ensure safe and easy transport onto and across the roof, and can
be used as transport straps for quick crane mounting.
Diffuse irradiation
Direct irradiation
The evacuated tube is a product with improved geometry and perfor-
mance. Two concentric glass tubes are closed on one side, forming a
hemisphere, and fused and hermetically sealed with each other on the
other side (evacuated insulation).
To use solar energy, the internal glass tube is coated with an environ-
mentally friendly, highly selective layer on the outside, thus turning it
into an absorber. The coating is protected in the evacuated space. The
aluminium nitrite sputter coating used is characterized by extremely
low emissions and excellent absorption.
Sharp mirror edges are framed in the aluminium frame profile. The
edges of the collector frame are sealed with rubber profiles. Only
few screws are used in those places which need to be unfastened for
maintenance; rivets are not used.
In the CPC w OEM, the hydraulic connections and the sensor are
located at the centre on top of the collector. The hydraulic connections
to the collector are fastened and unfastened with metal cutting ring
connections. This is the only type of connection which is completely
wear-and-tear-free and gas-proof.
The inlet and outlet pipes may be fitted on the left or the right of the
manifold.
Depending on the location of the inlet pipe the sensor is placed on the
right or the left.
The pipe registers are mass produced with just a minimum number of
soldering points. This results in high leakage-safety and a reduction of
internal scaling.
The heat conducting plates are made of aluminium so that even high
stagnation temperatures have no effect on the metal’s characteristics.
The heat conduction plate is folded into both copper tubes.
The tube holder can be mounted and demounted from the foot rail
without using tools.
Includes:
fully pre-mounted unit consisting of:
• Evacuated tubes according to the thermos principle
• manifold with direct flow heat conduction unit
and dry tube connection
• CPC mirror
• Collectors are packed in individual boxes.
Additional sun protection sheet over evacuated tubes.
Mounting types:
• Roof mounting
• Flat roof/wall mounting
Note: The manifold must always be mounted on top. The
minimum angle for sloped roof and flat roof mounting is 15°.
series slated roof ADM CPC 6 OEM ADM CPC 12 OEM ADM CPC 18 OEM
order No. 88-3020 88-3020 88-3030
Extension set
for connecting 2 or more ADM 6/2 and/or ADM 6/3, comprising 2 x connecting rails with mounting elements.
Type corrugated slab ADM CPC 6 OEM E ADM CPC 12 OEM E ADM CPC 18 OEM E
order No. 88-3021 88-3021 88-3031
series 45° FDM CPC 6 OEM FDM CPC 12 OEM FDM CPC 18 OEM
order No. 88-3011 88-3011 88-3011
series 30/60° FDM CPC 6 OEM FDM CPC 12 OEM FDM CPC 18 OEM
order No. 88-3010 88-3010 88-3010
Includes:
fully pre-mounted unit consisting of:
• Evacuated tubes according to the thermos principle
• manifold with direct flow heat conduction unit
and dry tube connection
• CPC mirror
• Collectors are packed in individual boxes.
Additional sun protection sheet over evacuated tubes.
Mounting types:
• Roof mounting
• Flat roof/wall mounting
Note: The manifold must always be mounted on top.
The minimum angle for sloped roof and flat roof mounting is 15°.
Includes:
• 2 (resp. 3) angle frames, weight 10 kg / frame
• L-bar, 35 x 35 x 3 mm, galvanized
• small parts
Solar controller AS 65
Scope of delivery:
• Solar controller
• 1 collector feeler Pt 1000,
high-temperature resistant,
1.5 m silicone cable
• 2 memory feelers Pt 1000, 2.5 m cable
• 1 accessories bag (screws, pegs, spare fuse)
Technical data
functions switch-on and switch-off temperature difference,
tube collector pushing function, thermostat switch-on and
switch-off function, freeze protection function (with
operation of the solar system without antifreeze), memory
maximum temperature limitation, operational monitoring.
operating voltage 210-250 V (AC), 50...60Hz
power consumption approx. 2 VA
protection class IP 40 / DIN 40050
housing plastics, PC-ABS and PMMA
dimensions, H x W x D 172 x 110 x 46 mm
assembly wall mounting
display LCD, multi-functional combination display with 8 pictograms,
two text fields with two digits, and two 7-segment displays
with four digits, 2-color LED.
operation three push-button actuators in housing front
input 3 feeler inputs Pt 1000
output 2 relay output
ambient temperature 0....40 °C
contact rating output solar pump max. 4 A
contact rating output reheating max. 4 A
total switching current max. 4 A
fuse in the controller pot fuse 4 AT
dimensions, L x W x H 460 x 350 x 580 mm
order No. RL-1065
Includes:
• filling and rinsing station with 20 l stainless steel tank
• centrifugal pump
• mains connection cable with switch
• pressure hose 1/2" x 3 m
• 2 reflow hoses 1/2" x 3 m
• inflow baffle inside the tank
• drain cock with hose
• pressure reducer
• safety valve 6 bar
• manometer
• fine and rough filter
Technical data
working pressure 6 bar at 5 l/min.
motor 230 V/50 Hz, 370 W
tank volume 20 l
safety valve 6 bar
pressure reducer 0,7 to 6 bar, adjustable
manometer 10 bar
temperature resistance max. 80 °C, short term
weight 23 kg with hoses
measurements LxWxH 460 x 350 x 580 mm
order No. 08-5609
Collector model
Collector model with 3 tubes,
fully functioning miniature tube collector.
L x W = 400 x 400 mm
Tube case
Tube with CPC mirror,
heat conduction plate and pipe register
in aluminium case with lid.
Suitable for transport and display.