Professional Documents
Culture Documents
IBM Itdt How To Create A Dump File Windows
IBM Itdt How To Create A Dump File Windows
This document describes the procedure of creating an IBM LTO tape drive dump file with the Windows application ‘itdt’.
1. Prerequisites
- Please download the application ‘itdt’ from the FTS download portal*).
- Open a command line and extract the downloaded file by executing it.
- Stop all services concerning the backup software and the Windows service ‘Removable Storage’ if applicable.
*) The FTS download portal is found at http://ts.fujitsu.com/support/downloads.html .
- start ‘itdt’
C:\FTS\itdt.exe
Service Facts Issue: January 26, 2011 Category: PRIMERGY Server Content: How To
Use: <Customer> Page 2 / 3
- Hint: After starting the application for the first time, it is necessary to read the license agreement and accept it.
- Scan the system for available drives by entering ‘S’ (for ‘Scan for tape drives…’), followed by [ENTER].
- Select the drive by entering the number of the drive (first row of the device list) and hit [ENTER].
…and is used for creating the tape drive dump file. Enter ‘D’ (for ‘Dump’) in order to continue.
- The files are located in the /output folder where ‘itdt’ was started.
All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to Published by department:
availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be Fujitsu Technology Solutions
trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may Technical Support
Phone: +49 821 804 5397
infringe the rights of such owner. For further information see http://ts.fujitsu.com/terms_of_use.html
technical.support@ts.fujitsu.com
Copyright © FUJITSU Technology Solutions GmbH 2010