Professional Documents
Culture Documents
Slab Design Cantilever One Way Two Way Continuous PDF
Slab Design Cantilever One Way Two Way Continuous PDF
Slab Design Cantilever One Way Two Way Continuous PDF
Design Calculations: -
CANTILEVER SLAB
Moment & Depth Check Calculations: -
The following calculations are not applicable, Design it as Doubly Reinforced Section
Reinforcement Calculations: -
Spacing Calculations: -
lx 2900 mm
ly 2900 mm
Moment, M 83.58 KN-m (Wu*Leff.²)/8
Depth check, d 173.63 mm sqrt(M/(R*b)) R=(0.36*fck*(Xumax/d))*(1-(0.412*(Xumax/d)))
Reinforcement Calculations: -
Spacing Calculations: -
Spacing for main bars #NUM! mm
Spacing for distribution bars 696.275 mm
CONTINUOUS SLAB
Moment & Depth Check Calculations: -
Reinforcement Calculations: -
Spacing Calculations: -
Spacing for main bars at span #NUM! mm
Spacing for main bars at support #NUM! mm
Spacing for distribution bars 696.275 mm
CONTINUOUS SLAB
This shall be Designed as Two Way Slab
Moment & Depth Check Calculations: -
Spacing Calculations: -
Spacing for Mx -ve #DIV/0! mm
Spacing for Mx +ve 411.88 mm
Spacing for My -ve #DIV/0! mm
Spacing for My +ve 553.45 mm
lx 2150 mm
ly 2900 mm
ly/lx 1.35
αx 0.037 } depending upon the type of panel and (Ref. IS 456 D-1.1 & Tb-26)
αy 0.028 moments considered conditions Pg-90 & 91
Mx 8.55163 KN-m αx*W*lx²
My 6.4715 KN-m αy*W*lx²
Max. Moment, M 8.55163 KN-m
depth check, d 55.54 mm sqrt(M/(R*b)) R=(0.36*fck*(Xumax/d))*(1-(0.412*(Xumax/d)))
90 150
Reinforcement Calculations: - 122
Design Calculations:-
Steel Reinforcement:-
Compression Reinf.:-
Spacing:-