| 4 DLE
OPERATING PRESSURE NOTED FOR 150 F SELES
Technical Data
Burst Pressure vs. Temperature for Safeline’s 2" Kynar (PVDF) Metal Detec-
tion Tube.
All Safeline Metal Detection Tubes are made of high quality Kynar. This
tubing represents a mating of U.S.D.A. and F.D.A. Approved steam cleanable
polymer. For use with system temperatures from -40° up to 240°F. st
115
NOTES: baa
Burst pressure based on
tensile strength:
BLP. =(2)(T.S.)(WALL)
0.0.
y
To calculate working pressure
divide burst pressure by a
safety factor of 3.
3
2
‘Temperatures for PVDF are
rated between -40° and 240° F
BURST PRESSURE X 100 (psi)
s
Pressure for tubing only.
Connections and ends must be |
calculated separately ci a ERE GRE EE ET)
TEMPERATURE °F
In actual testing all results were comparable to the above chart. All pressures
were held for a period of time. Upon request, we will have a rating and test result
accompany your individual order.