Professional Documents
Culture Documents
R2 Structure Quantities of Beawar Pali NH-14 12 April 2010.zip
R2 Structure Quantities of Beawar Pali NH-14 12 April 2010.zip
165 m Span
1.2
0.18 A
0.042 B
1.73 C
0.825
Section of Girder at ends
3.1
0.825 0.3
1.2
0.45 0.45
0.30
0.18 A
0.1 B
1.228 C
0.2 D
0.24 E
0.263 0.263
0.825
Section of Girder in intermediate portion
1.25
0.18 A
0.042 B
1.44 C
0.825
Section of Girder at ends
2.7
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.942 C
0.2 D
0.24 E
0.263 0.263
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.042 B
1.72 C
0.825
Section of Girder at ends
3.0
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
1.217 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.042 B
1.12 C
0.83
Section of Girder at ends
2.2
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.619 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.042 B
1.15 C
0.83
Section of Girder at ends
2.2
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.651 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.15 C
0.83
Section of Girder at ends
2.2
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.660 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.01 C
0.83
Section of Girder at ends
2.0
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.510 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.48 C
0.83
Section of Girder at ends
2.8
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.980 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
0.96 C
0.83
Section of Girder at ends
1.9
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.454 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.07 C
0.83
Section of Girder at ends
2.1
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.571 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.31 C
0.83
Section of Girder at ends
2.5
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.808 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.00 C
0.83
Section of Girder at ends
1.9
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.501 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.07 C
0.83
Section of Girder at ends
2.1
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.565 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.07 C
0.83
Section of Girder at ends
2.1
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.571 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.28 C
0.83
Section of Girder at ends
2.4
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.775 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.24 C
0.83
Section of Girder at ends
2.4
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.736 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.16 C
0.83
Section of Girder at ends
2.2
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.654 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.48 C
0.83
Section of Girder at ends
2.7
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.975 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.16 C
0.83
Section of Girder at ends
2.2
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.652 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
0.99 C
0.83
Section of Girder at ends
1.9
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.483 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
0.99 C
0.83
Section of Girder at ends
1.9
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.483 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
0.97 C
0.83
Section of Girder at ends
1.9
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
0.468 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.25
0.18 A
0.037 B
1.94 C
0.83
Section of Girder at ends
3.4
0.825 0.3
1.25
0.475 0.475
0.30
0.18 A
0.1 B
1.436 C
0.2 D
0.24 E
0.2625 0.2625
0.83
Section of Girder in intermediate portion
1.2
0.18 A
0.042 B
1.75 C
0.825
Section of Girder at ends
3.0
0.825 0.3
1.2
0.45 0.45
0.30
0.18 A
0.1 B
1.251 C
0.2 D
0.24 E
0.263 0.263
0.825
Section of Girder in intermediate portion
0
0 A
0 B
1.11 C
0.625
Section of Girder at ends
0.9
0.625 0.375
0.625
0.125 0.125
0.375
0.25 A
0.15 B
0.31 C
0.15 D
0.25 E
0.125 0.125
0.625
Section of Girder in intermediate portion
0
0 A
0 B
1.11 C
0.625
Section of Girder at ends
0.9
0.625 0.375
0.625
0.125 0.125
0.375
0.25 A
0.15 B
0.31 C
0.15 D
0.25 E
0.125 0.125
0.625
Section of Girder in intermediate portion
0
0 A
0 B
1.01 C
0.625
Section of Girder at ends
0.9
0.625 0.375
0.625
0.125 0.125
0.375
0.25 A
0.15 B
0.21 C
0.15 D
0.25 E
0.125 0.125
0.625
Section of Girder in intermediate portion
0
0 A
0 B
1.26 C
0.625
Section of Girder at ends
0.9
0.625 0.375
0.625
0.125 0.125
0.375
0.25 A
0.15 B
0.46 C
0.15 D
0.25 E
0.125 0.125
0.625
Section of Girder in intermediate portion
BILL OF QUANT
7. Bridge/ Structure Works
Item
Description of Item Unit Rate
No.
A. Dismantling
6.01 Dismantling of
a) Brick Masonry Cum -
b) Stone Masonry Cum -
c) PCC Cum -
d) RCC Cum -
e) Wearing course/Pavement Cum -
6.02 Dredging and disposing of silting Cum -
B. Foundations -
6.03 Earthwork in excavation -
a) In all types of Soil/Clay Cum -
b) In ordinary Rock Cum -
c) In hard Rock Cum -
6.04 PCC of Grade M 15 Cum -
6.05 PCC of Grade M20 in cut off walls Cum -
6.06 RCC in open foundations -
a) Grade M 25 Cum -
b) Grade M 30 Cum -
6.07 Piles of 1200 mm diameter -
a) 0-10m depth Lm -
b) 10-20m depth Lm -
c) 20-30m depth Lm -
6.08 Carrying out load test on any pile -
a) Initial Load Test on test pile for 2.0 times the design load -
1.2 m Dia Pile MT -
b) Routine pile load test on working pile for a test load of 1.5 times -
1.2 m Dia Pile (2% of piles in total). MT -
c) Initial Horizontal pile load test on test pile for a test load of 2.0 times -
1.2 m Dia Pile MT -
6.09 RCC grade M 35 in pile cap Cum -
6.10 Cutting edge for well foundations MT -
1 of 150
The Louis Berger Group, Inc
BILL OF QUANT
6.11 RCC of Grade M30 in well curbs Cum -
6.12 RCC of Grade M30 in well steining Cum -
6.13 Sinking of well foundations -
a) 7.0 m dia. Well -
(i) 0 - 3m depth Lm -
(ii) 3 - 10m depth Lm -
(iii) 10 - 15m depth Lm -
(iv) 15 - 20m depth Lm -
b) 6.0 m dia. Well -
(i) 0 - 3m depth Lm -
(ii) 3 - 10m depth Lm -
(iii) 10 - 15m depth Lm -
(iv) 15 - 20m depth Lm
6.14 RCC grade M 25 in bottom Plug Cum -
6.15 filling sand in the dredge holes of the wells Cum -
6.16 RCC grade M 25 in Top / Intermediate Plug Cum -
6.17 RCC grade M 30 in well cap Cum -
6.18 Providing & fixing in position HYSD (TMT) Fe 500 grade reinforcement
bars in open foundations,Pile, Pile caps, Well caps, well steining ,box MT -
cell structures and well kerb
C. Substructures -
6.19 RCC in piers, pier cap, pedestals, cantilever/counterfort abutments,
abutment cap, dirt walls, wing walls, retaining walls, median wall etc -
a) Grade M 30 Cum -
b) Grade M 35 Cum -
6.20 RCC in box cell structures -
a) Grade M 25 Cum -
b) Grade M 30 Cum -
6.21 HYSD (TMT) Fe 500 grade reinforcement bars in abutment wall,
abutment cap, dirt wall, pier, pier caps and retaining wall, box cell etc. MT -
6.22 Back filling behind abutments, wing walls, return wall etc. Cum -
6.23 Filter media behind abutment, retaining wall and return wall Cum -
6.24 100mm diameter PVC pipe for weep holes in retaining wall, abutment
Nos. -
wall, wing/return wall, median wall
D. Superstructures -
6.25 RCC grade M-35 in Solid Slab Cum -
6.26 HYSD (TMT) Fe 500 grade reinforcement bars in RCC Solid Slab MT -
6.27 RCC M-35 in T-beam Girders, cross girders and deck slab Cum -
6.28 HYSD (TMT) Fe 500 grade reinforcement bars in T-beam Girders,
MT -
cross girders and deck slab
6.29 Cast-in-situ grade M-45 in deck slab and cross-griders for Pre-stressed
Cum -
Concrete girders
6.30 HYSD (TMT) Fe 500 grade reinforcement bars in in deck slab, girders
MT -
and cross-griders of PSC girder superstructure
6.31 Pre-stressed Concrete in Pre-cast I beam girders Cum -
2 of 150
The Louis Berger Group, Inc
BILL OF QUANT
6.32 High tensile steel wires/strands MT -
6.33 Structural Steel MT
E. Miscellaneous -
6.34 Wearing Coat Sqm -
6.35 Bearings -
a) POT cum PTFE -
(i) Fixed Bearing Nos. -
(ii)Free/Guided Bearing Nos. -
b) Elastomeric Bearings Cu Cm -
c) Tar paper bearing Sqm -
6.36 Expansion Joints -
a) Filler type joints Lm -
b) Strip seal type Lm -
6.37 Drainage spouts Nos. -
6.38 RCC grade M40 in crash barrier Cum -
6.39 PCC grade M 15 below approach slabs Cum -
6.40 RCC grade M 30 in approach slabs Cum -
6.41 PVC downtake and runner pipe Lm -
6.42 Painting structure Nos. -
6.43 Hand packed boulder pitching on slopes of embankment Cum -
6.44 Filter material underneath stone pitching Cum -
6.45 Rigid apron Cum -
6.46 Boulder apron Cum -
6.47 RCC M20 in head walls Cum -
6.48 sub soil investigation/confirmatory boreholes Lm -
a) Depth between 0m to 10m m 1,000
b) Depth between 10m to 20m m 1,200
c) Depth between 20m to 30m m
d) Depth between 30m to 40m m
G. Rehabilitation of Structures -
6.49 Cleaning and removal of vegetation growth from structures, channel
Sqm.
and protective works as per directions of the Engineer.
6.50 Replacement of RCC railing including reinforcement as per MORT&H
Specifications Section 1500, 1600, 1700, 2200, 2815 and Clause 2703
3 of 150
The Louis Berger Group, Inc
OF QUANTITIES
Bridge at Bridge at
Minor Bridge at Km
Minor Bridge at Km 35.860
22.680
- -
- -
- -
- -
- -
- -
- -
- -
354 354 1,416.89 - 533 298 298 533
- -
- -
12 12 47.23 - 13 7 7 13
- -
- -
- -
106 106 425.72 - 120 49 49 120
- -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- -
- -
- - - - - - - -
- -
- - - - - - - -
- -
- - - - - - - -
- - - - - - - -
- - - - - - - -
4 of 150
The Louis Berger Group, Inc
OF QUANTITIES
- - - - - - - -
- - - - - - - -
- -
- -
- - - - - - - -
- - - - - - - -
- -
- - - - - - - -
- - - - - - - -
- -
- - - - - - - -
- - - - - - - -
- -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
9 9 10 4 4 10
34.06 -
- -
- -
- -
138 138 553.99 - 145 69 69 145
- -
- -
- - - - - - - -
17 17 18 9 9 18
67.04 -
618 618 2,470.69 - 598 - - 598
72 72 286.03 - 57 1 1 57
51 51 37 37
202.40 -
- -
154 - 308.09 - 148 148 148 -
14 - 27.73 - 13 13 13 -
- - - - - - - -
- - - - - -
- -
- - - - - -
- -
- - - - - -
- -
- - - - - - - -
5 of 150
The Louis Berger Group, Inc
OF QUANTITIES
- - - - - - - -
- -
- -
205 - 410.74 - 204 127 127 -
- -
- -
- - - - - - - -
- - - - - - - -
- - - - - - - -
7 7 28.80 - 7 8 8 7
- -
14 14 55.43 - 16 16 16 16
- - - - - - - -
3 - 5.84 - 3 3 3 -
11 - 22.40 - 11 7 7 -
6 6 25.92 - 6 6
13 13 50.40 - 13 - - 13
- - - - - - - -
1 - 2.00 - 1 - - -
18 18 70.80 - 14 - - 14
9 9 35.40 - 7 - - 7
- -
- -
- - - - - - - -
- - - - - -
10 20.00 20,000.00 10 10
5 10.00 12,000.00 5 5
- -
- -
- - - - - - - -
- - 300 575 575 300
- -
- - - - - -
- -
- - - - 37 37 37 -
6 of 150
The Louis Berger Group, Inc
1 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
7. Bridge/ Structure Works
Item
Description of Item Unit
No.
A. Dismantling
6.01 Dismantling of
a) Brick Masonry Cum
b) Stone Masonry Cum
c) PCC Cum
d) RCC Cum
e) Wearing course/Pavement Cum
6.02 Dredging and disposing of silting Cum
B. Foundations
6.03 Earthwork in excavation
a) In all types of Soil/Clay Cum
b) In ordinary Rock Cum
c) In hard Rock Cum
6.04 PCC of Grade M 15 Cum
6.05 PCC of Grade M20 in cut off walls Cum
6.06 RCC in open foundations
a) Grade M 25 Cum
b) Grade M 30 Cum
6.07 Piles of 1200 mm diameter
a) 0-10m depth Lm
b) 10-20m depth Lm
c) 20-30m depth Lm
6.08 Carrying out load test on any pile
a) Initial Load Test on test pile for 2.0 times the design load
1.2 m Dia Pile MT
b) Routine pile load test on working pile for a test load of 1.5 times
1.2 m Dia Pile (2% of piles in total). MT
c) Initial Horizontal pile load test on test pile for a test load of 2.0 times
1.2 m Dia Pile MT
6.09 RCC grade M 35 in pile cap Cum
6.10 Cutting edge for well foundations MT
2 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.11 RCC of Grade M30 in well curbs Cum
6.12 RCC of Grade M30 in well steining Cum
6.13 Sinking of well foundations
a) 7.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
b) 6.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
6.14 RCC grade M 25 in bottom Plug Cum
6.15 filling sand in the dredge holes of the wells Cum
6.16 RCC grade M 25 in Top / Intermediate Plug Cum
6.17 RCC grade M 30 in well cap Cum
6.18 Providing & fixing in position HYSD (TMT) Fe 500 grade reinforcement
bars in open foundations,Pile, Pile caps, Well caps, well steining ,box MT
cell structures and well kerb
C. Substructures
6.19 RCC in piers, pier cap, pedestals, cantilever/counterfort abutments,
abutment cap, dirt walls, wing walls, retaining walls, median wall etc
a) Grade M 30 Cum
b) Grade M 35 Cum
6.20 RCC in box cell structures
a) Grade M 25 Cum
b) Grade M 30 Cum
6.21 HYSD (TMT) Fe 500 grade reinforcement bars in abutment wall,
abutment cap, dirt wall, pier, pier caps and retaining wall, box cell etc. MT
6.22 Back filling behind abutments, wing walls, return wall etc. Cum
6.23 Filter media behind abutment, retaining wall and return wall Cum
6.24 100mm diameter PVC pipe for weep holes in retaining wall, abutment
Nos.
wall, wing/return wall, median wall
D. Superstructures
6.25 RCC grade M-35 in Solid Slab Cum
6.26 HYSD (TMT) Fe 500 grade reinforcement bars in RCC Solid Slab MT
6.27 RCC M-35 in T-beam Girders, cross girders and deck slab Cum
6.28 HYSD (TMT) Fe 500 grade reinforcement bars in T-beam Girders,
MT
cross girders and deck slab
6.29 RCC Cast-in-situ grade M-45 in deck slab and cross girders of PSC
Cum
Girders
6.30 HYSD (TMT) Fe 500 grade reinforcement bars in RCC cast-in-situ
MT
deck slab, girders and Cross Girders
3 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.31 Pre-stressed Concrete in Pre-cast I beam girders and cross girders
Cum
6.32 High tensile steel wires/strands in Girders MT
6.33 Structural Steel MT
E. Miscellaneous
6.34 Wearing Coat Sqm
6.35 Bearings
a) POT cum PTFE
(i) Fixed Bearing Nos.
(ii) Free/Guided Bearing Nos.
b) Elastomeric Bearings Cu Cm
c) Tar paper bearing Sqm
6.36 Expansion Joints
a) Filler type joints Lm
b) Strip seal type Lm
6.37 Drainage spouts Nos.
6.38 RCC grade M40 in crash barrier Cum
6.39 PCC grade M 15 below approach slabs Cum
6.40 RCC grade M 30 in approach slabs Cum
6.41 PVC downtake and runner pipe Lm
6.42 Painting structure Nos.
6.43 Hand packed boulder pitching on slopes of embankment Cum
6.44 Filter material underneath stone pitching Cum
6.45 Rigid apron Cum
6.46 Boulder apron Cum
6.47 RCC M20 in head walls Cum
6.48 Sub soil investigation/confirmatory boreholes Lm
a) Depth between 0m to 10m m
b) Depth between 10m to 20m m
c) Depth between 20m to 30m m
d) Depth between 30m to 40m m
G. Rehabilitation of Structures
6.49 Cleaning and removal of vegetation growth from structures, channel
Sqm.
and protective works as per directions of the Engineer.
6.50 Replacement of RCC railing including reinforcement as per MORT&H
Specifications Section 1500, 1600, 1700, 2200, 2815 and Clause 2703
4 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.53 Providing Reinforced cement concrete M-30 grade in approach slab
including reinforcement for existing bridges complete as per drawing
and MORT&H Specifications sections 1500, 1600, 1700 and clause Cum.
2704.
5 of 150
The Louis Berger Group, Inc
6 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
Rate
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
7 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
9 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
10 of 150
The Louis Berger Group, Inc
1 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
7. Bridge/ Structure Works
Item
Description of Item Unit
No.
A. Dismantling
6.01 Dismantling of
a) Brick Masonry Cum
b) Stone Masonry Cum
c) RCC Cum
d) RCC Cum
e) Wearing course/Pavement Cum
6.02 Dredging and disposing of silting Cum
B. Foundations
6.03 Earthwork in excavation
a) In all types of Soil/Clay Cum
b) In ordinary Rock Cum
c) In hard Rock Cum
6.04 PCC of Grade M 15 Cum
6.05 PCC of Grade M20 in cut off walls Cum
6.06 RCC in open foundations
a) Grade M 25 Cum
b) Grade M 30 Cum
6.07 Piles of 1200 mm diameter
a) 0-10m depth Lm
b) 10-20m depth Lm
c) 20-30m depth Lm
6.08 Carrying out load test on any pile
a) Initial Load Test on test pile for 2.0 times the design load
1.2 m Dia Pile MT
b) Routine pile load test on working pile for a test load of 1.5 times
1.2 m Dia Pile (2% of piles in total). MT
c) Initial Horizontal pile load test on test pile for a test load of 2.0 times
1.2 m Dia Pile MT
6.09 RCC grade M 35 in pile cap Cum
6.10 Cutting edge for well foundations MT
2 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.11 RCC of Grade M30 in well curbs Cum
6.12 RCC of Grade M30 in well steining Cum
6.13 Sinking of well foundations
a) 7.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
b) 6.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
6.14 RCC grade M 25 in bottom Plug Cum
6.15 filling sand in the dredge holes of the wells Cum
6.16 RCC grade M 25 in Top / Intermediate Plug Cum
6.17 RCC grade M 30 in well cap Cum
6.18 Providing & fixing in position HYSD (TMT) Fe 500 grade reinforcement
bars in open foundations,Pile, Pile caps, Well caps, well steining ,box MT
cell structures and well kerb
C. Substructures
6.19 RCC in piers, pier cap, pedestals, cantilever/counterfort abutments,
abutment cap, dirt walls, wing walls, retaining walls, median wall etc
a) Grade M 30 Cum
b) Grade M 35 Cum
6.20 RCC in box cell structures
a) Grade M 25 Cum
b) Grade M 30 Cum
6.21 HYSD (TMT) Fe 500 grade reinforcement bars in abutment wall,
abutment cap, dirt wall, pier, pier caps and retaining wall, box cell etc. MT
6.22 Back filling behind abutments, wing walls, return wall etc. Cum
6.23 Filter media behind abutment, retaining wall and return wall Cum
6.24 100mm diameter PVC pipe for weep holes in retaining wall, abutment
Nos.
wall, wing/return wall, median wall
D. Superstructures
6.25 RCC grade M-35 in Solid Slab Cum
6.26 HYSD (TMT) Fe 500 grade reinforcement bars in RCC Solid Slab MT
6.27 RCC M-35 in T-beam Girders, cross girders and deck slab Cum
6.28 HYSD (TMT) Fe 500 grade reinforcement bars in T-beam Girders,
MT
cross girders and deck slab
6.29 RCC Cast-in-situ grade M-45 in deck slab and cross girders of PSC
Cum
Girders
6.30 HYSD (TMT) Fe 500 grade reinforcement bars in RCC cast-in-situ
deck slab, girders and Cross Girders MT
6.31 Pre-stressed Concrete in Pre-cast I beam girders Cum
3 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.32 High tensile steel wires/strands in Girders MT
6.33 Structural Steel MT
E. Miscellaneous
6.34 Wearing Coat Sqm
6.35 Bearings
a) POT cum PTFE
(i) Fixed Bearing Nos.
(ii) Free/Guided Bearing Nos.
b) Elastomeric Bearings Cu Cm
c) Tar paper bearing Sqm
6.36 Expansion Joints
a) Filler type joints Lm
b) Strip seal type Lm
6.37 Drainage spouts Nos.
6.38 RCC grade M40 in crash barrier Cum
6.39 PCC grade M 15 below approach slabs Cum
6.40 RCC grade M 30 in approach slabs Cum
6.41 PVC downtake and runner pipe Lm
6.42 Painting structure Nos.
6.43 Hand packed boulder pitching on slopes of embankment Cum
6.44 Filter material underneath stone pitching Cum
6.45 Rigid apron Cum
6.46 Boulder apron Cum
6.47 RCC M20 in head walls Cum
6.48 Sub soil investigation/confirmatory boreholes
a) Depth between 0m to 10m Lm
b) Depth between 10m to 20m Lm
c) Depth between 20m to 30m Lm
d) Depth between 30m to 40m Lm
G. Rehabilitation of Structures
6.49 Cleaning and removal of vegetation growth from structures, channel
Sqm.
and protective works as per directions of the Engineer.
6.50 Replacement of RCC railing including reinforcement as per MORT&H
Specifications Section 1500, 1600, 1700, 2200, 2815 and Clause 2703
4 of 150
The Louis Berger Group, Inc
75.6 160
0
0.0
0.0
80 80
140 140
40 40
36 36
8 8
0.7 0.7
5 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
Rate
- - -
- - -
- - -
- - -
- - -
- - -
-
-
- 393 364
-
-
- 11 10
- - -
-
-
- 125 160
-
- - -
- - -
- - -
-
-
- - -
-
- - -
-
- - -
- - -
- - -
6 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- - -
- - -
-
-
- - -
-
- - -
- - -
- - -
- - -
- - -
- - -
- 10 13
-
- 57 48
-
-
- - -
- 9 8
- - -
- - -
- - -
-
- - -
- - -
- - -
- - -
- 120 120
- 36 36
- 140 140
7 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- 8 8
-
- 409 332
-
-
-
-
- 38,400 76,800
- - -
-
- - -
- 12 12
- 8 8
- 22 18
6
- 13 -
- 36 36
- 1 -
- - -
- - -
- - -
- - -
- - -
-
10 10
5 5
- -
-
- -
- -
- -
- -
- -
- -
8 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
7. Bridge/ Structure Works
Item
Description of Item Unit
No.
A. Dismantling
6.01 Dismantling of
a) Brick Masonry Cum
b) Stone Masonry Cum
c) RCC Cum
d) RCC Cum
e) Wearing course/Pavement Cum
6.02 Dredging and disposing of silting Cum
B. Foundations
6.03 Earthwork in excavation
a) In all types of Soil/Clay Cum
b) In ordinary Rock Cum
c) In hard Rock Cum
6.04 PCC of Grade M 15 Cum
6.05 PCC of Grade M20 in cut off walls Cum
6.06 RCC in open foundations
a) Grade M 25 Cum
b) Grade M 30 Cum
6.07 Piles of 1200 mm diameter
a) 0-10m depth Lm
b) 10-20m depth Lm
c) 20-30m depth Lm
6.08 Carrying out load test on any pile
a) Initial Load Test on test pile for 2.0 times the design load
1.2 m Dia Pile MT
b) Routine pile load test on working pile for a test load of 1.5 times
1.2 m Dia Pile (2% of piles in total). MT
c) Initial Horizontal pile load test on test pile for a test load of 2.0 times
1.2 m Dia Pile MT
6.09 RCC grade M 35 in pile cap Cum
6.10 Cutting edge for well foundations MT
1 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.11 RCC of Grade M30 in well curbs Cum
6.12 RCC of Grade M30 in well steining Cum
6.13 Sinking of well foundations
a) 7.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
b) 6.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
6.14 RCC grade M 25 in bottom Plug Cum
6.15 filling sand in the dredge holes of the wells Cum
6.16 RCC grade M 25 in Top / Intermediate Plug Cum
6.17 RCC grade M 30 in well cap Cum
6.18 Providing & fixing in position HYSD (TMT) Fe 500 grade reinforcement
bars in open foundations,Pile, Pile caps, Well caps, well steining ,box MT
cell structures and well kerb
C. Substructures
6.19 RCC in piers, pier cap, pedestals, cantilever/counterfort abutments,
abutment cap, dirt walls, wing walls, retaining walls, median wall etc
a) Grade M 30 Cum
b) Grade M 35 Cum
6.20 RCC in box cell structures
a) Grade M 25 Cum
b) Grade M 30 Cum
6.21 HYSD (TMT) Fe 500 grade reinforcement bars in abutment wall,
abutment cap, dirt wall, pier, pier caps and retaining wall, box cell etc. MT
6.22 Back filling behind abutments, wing walls, return wall etc. Cum
6.23 Filter media behind abutment, retaining wall and return wall Cum
6.24 100mm diameter PVC pipe for weep holes in retaining wall, abutment
Nos.
wall, wing/return wall, median wall
D. Superstructures
6.25 RCC grade M-35 in Solid Slab Cum
6.26 HYSD (TMT) Fe 500 grade reinforcement bars in RCC Solid Slab MT
6.27 RCC M-35 in T-beam Girders, cross girders and deck slab Cum
6.28 HYSD (TMT) Fe 500 grade reinforcement bars in T-beam Girders,
MT
cross girders and deck slab
6.29 Cast-in-situ grade M-45 in deck slab and cross girders of PSC Girders
Cum
6.30 HYSD (TMT) Fe 500 grade reinforcement bars in RCC cast-in-situ
MT
deck slab, girders and Cross Girders
2 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.31 Pre-stressed Concrete in Pre-cast I beam girders and cross girders
Cum
6.32 High tensile steel wires/strands in Girders MT
6.33 Structural Steel MT
E. Miscellaneous
6.34 Wearing Coat Sqm
6.35 Bearings
a) POT cum PTFE
(i) Fixed Bearing Nos.
(ii) Free/Guided Bearing Nos.
b) Elastomeric Bearings Cu Cm
c) Tar paper bearing Sqm
6.36 Expansion Joints
a) Filler type joints Lm
b) Strip seal type Lm
6.37 Drainage spouts Nos.
6.38 RCC grade M40 in crash barrier Cum
6.39 PCC grade M 15 below approach slabs Cum
6.40 RCC grade M 30 in approach slabs Cum
6.41 PVC downtake and runner pipe Lm
6.42 Painting structure Nos.
6.43 Hand packed boulder pitching on slopes of embankment Cum
6.44 Filter material underneath stone pitching Cum
6.45 Rigid apron Cum
6.46 Boulder apron Cum
6.47 RCC M20 in head walls Cum
6.48 Sub soil investigation/confirmatory boreholes Lm
a) Depth between 0m to 10m m
b) Depth between 10m to 20m m
c) Depth between 20m to 30m m
d) Depth between 30m to 40m m
G. Rehabilitation of Structures
6.49 Cleaning and removal of vegetation growth from structures, channel
Sqm.
and protective works as per directions of the Engineer.
6.50 Replacement of RCC railing including reinforcement as per MORT&H
Specifications Section 1500, 1600, 1700, 2200, 2815 and Clause 2703
3 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.53 Providing Reinforced cement concrete M-30 grade in approach slab
including reinforcement for existing bridges complete as per drawing
and MORT&H Specifications sections 1500, 1600, 1700 and clause Cum.
2704.
4 of 150
The Louis Berger Group, Inc
Rate
- - - -
- - - -
- - - -
- - - -
- - - -
- 788 788 973 973 838 838
- - - -
- - - -
- 373 373 452 452 394 394
- - - -
- - - -
- 33 33 40 40 35 35
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
5 of 150
The Louis Berger Group, Inc
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- 622 622 757 757 659 659
- 62 62 76 76 66 66
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
6 of 150
The Louis Berger Group, Inc
- - - -
- - - -
- - -
- - - -
- 414 414 468 468 428 428
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- 55 55 68 68 59 59
- - - -
- 2 2 2 2 2 2
- 11 11 13 13 12 12
26 26 26 26 26 26
- 58 58 58 58 58 58
- 10 10 10 10 10 10
- 1 1 1 1 1 1
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
10 10 10 10 10 10
5 5 5 5 5 5
- - -
- - -
- - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
7 of 150
The Louis Berger Group, Inc
- - - - - -
8 of 150
The Louis Berger Group, Inc
Underpass
- - -
- - -
- - -
- - -
- - -
788 788 788 788 450 450
- - -
- - -
373 373 373 373 190 190
- - -
- - -
33 33 33 33 20 20
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
9 of 150
The Louis Berger Group, Inc
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
622 622 622 622 308 308
62 62 62 62 25 25
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
10 of 150
The Louis Berger Group, Inc
- - -
- - -
- - -
- - -
414 414 414 414 306 306
- - -
- - -
- - -
- - -
- - -
- - -
- - -
55 55 55 55 55 55
- - -
2 2 2 2 2 2
11 11 11 11 8 8
26 26 26 26 26 26
58 58 58 58 58 58
10 10 10 10 9 9
1 1 1 1 1 1
- - -
- - -
- - -
- - -
- - -
- - -
10 10 10 10 10 10
5 5 5 5 5 5
- - -
- - -
- - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
11 of 150
The Louis Berger Group, Inc
- - - - - -
12 of 150
The Louis Berger Group, Inc
- - -
- - -
- - -
- - -
- - -
450 450 450 450 450 450
- - -
- - -
191 191 190 190 190 190
- - -
- - -
20 20 20 20 20 20
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
13 of 150
The Louis Berger Group, Inc
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
316 316 308 308 308 308
25 25 25 25 25 25
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
14 of 150
The Louis Berger Group, Inc
- - -
- - -
- - -
- - -
307 307 306 306 306 306
- - -
- - -
- - -
- - -
- - -
- - -
- - -
55 55 55 55 55 55
- - -
2 2 2 2 2 2
8 8 8 8 8 8
26 26 26 26 26 26
58 58 58 58 58 58
9 9 9 9 9 9
1 1 1 1 1 1
- - -
- - -
- - -
- - -
- - -
- - -
10 10 10 10 10 10
5 5 5 5 5 5
- - -
- - -
- - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
15 of 150
The Louis Berger Group, Inc
- - - - - -
16 of 150
The Louis Berger Group, Inc
5.0
0.5
-
-
-
-
-
450 450
-
-
190 190
-
-
20 20
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
17 of 150
The Louis Berger Group, Inc
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
308 308
25 25
-
-
-
-
-
-
-
-
18 of 150
The Louis Berger Group, Inc
-
-
-
-
306 306
-
-
-
-
-
-
-
55 55
-
2 2
8 8
26 26
58 58
9 9
1 1
-
-
-
-
-
-
10 10
5 5
-
-
-
- -
- -
- -
- -
- -
19 of 150
The Louis Berger Group, Inc
- -
20 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
7. Bridge/ Structure Works
Item
Description of Item Unit
No.
A. Dismantling
6.01 Dismantling of
a) Brick Masonry Cum
b) Stone Masonry Cum
c) PCC Cum
d) RCC Cum
e) Wearing course/Pavement Cum
6.02 Dredging and disposing of silting Sqm
B. Foundations
6.03 Earthwork in excavation
a) In all types of Soil/Clay Cum
b) In ordinary Rock Cum
c) In hard Rock Cum
6.04 PCC of Grade M 15 Cum
6.05 PCC of Grade M20 in cut off walls Cum
6.06 RCC in open foundations
a) Grade M 25 Cum
b) Grade M 35 Cum
6.07 Piles of 1200 mm diameter
a) 0-10m depth Lm
b) 10-20m depth Lm
c) 20-30m depth Lm
6.08 Carrying out load test on any pile
a) Initial Load Test on test pile for 2.0 times the design load
1.2 m Dia Pile MT
b) Routine pile load test on working pile for a test load of 1.5 times
1.2 m Dia Pile (2% of piles in total). MT
c) Initial Horizontal pile load test on test pile for a test load of 2.0 times
1.2 m Dia Pile MT
6.09 RCC grade M 35 in pile cap Cum
6.10 Cutting edge for well foundations MT
6.11 RCC of Grade M30 in well curbs Cum
6.12 RCC of Grade M30 in well steining Cum
6.13 Sinking of well foundations
a) 7.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
b) 6.0 m dia. Well
(i) 0 - 3m depth Lm
(ii) 3 - 10m depth Lm
1 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
(iii) 10 - 15m depth Lm
(iv) 15 - 20m depth Lm
6.14 RCC grade M 25 in bottom Plug Cum
6.15 filling sand in the dredge holes of the wells Cum
6.16 RCC grade M 25 in Top / Intermediate Plug Cum
6.17 RCC grade M 30 in well cap Cum
6.18 Providing & fixing in position HYSD (TMT) Fe 500 grade reinforcement
bars in open foundations,Pile, Pile caps, Well caps, well steining ,box MT
cell structures and well kerb
2 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
C. Substructures
6.19 RCC in piers, pier cap, pedestals, cantilever/counterfort abutments,
abutment cap, dirt walls, wing walls, retaining walls, median wall etc
a) Grade M 30 Cum
b) Grade M 35 Cum
6.20 RCC in box cell structures
a) Grade M 25 Cum
b) Grade M 30 Cum
6.21 HYSD (TMT) Fe 500 grade reinforcement bars in abutment wall,
abutment cap, dirt wall, pier, pier caps and retaining wall, box cell etc. MT
6.22 Back filling behind abutments, wing walls, return wall etc. Cum
6.23 Filter media behind abutment, retaining wall and return wall Cum
6.24 100mm diameter PVC pipe for weep holes in retaining wall, abutment
Nos.
wall, wing/return wall, median wall
D. Superstructures
6.25 RCC grade M-35 in Solid Slab Cum
6.26 HYSD (TMT) Fe 500 grade reinforcement bars in RCC Solid Slab MT
6.27 RCC M-35 in T-beam Girders, cross girders and deck slab Cum
6.28 HYSD (TMT) Fe 500 grade reinforcement bars in T-beam Girders,
MT
cross girders and deck slab
6.29 RCC Cast-in-situ grade M-45 in deck slab and cross girders of PSC
Cum
Girders
6.30 HYSD (TMT) Fe 500 grade reinforcement bars in RCC cast-in-situ
MT
deck slab, girders and Cross Girders
6.31 Pre-stressed Concrete in Pre-cast I beam girders and cross girders
Cum
6.32 High tensile steel wires/strands in Girders MT
6.33 Structural Steel MT
E. Miscellaneous
6.34 Wearing Coat Sqm
6.35 Bearings
a) POT cum PTFE
(i) Fixed Bearing Nos.
(ii) Free/Guided Bearing Nos.
b) Elastomeric Bearings Cu Cm
c) Tar paper bearing Sqm
6.36 Expansion Joints
a) Filler type joints Lm
b) Strip seal type Lm
6.37 Drainage spouts Nos.
6.38 RCC grade M40 in crash barrier Cum
6.39 PCC grade M 15 below approach slabs Cum
6.40 RCC grade M 30 in approach slabs Cum
6.41 PVC downtake and runner pipe Lm
6.42 Painting structure Nos.
3 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
6.43 Hand packed boulder pitching on slopes of embankment Cum
6.44 Filter material underneath stone pitching Cum
6.45 Rigid apron Cum
6.46 Boulder apron Cum
6.47 RCC M20 in head walls Cum
6.48 Sub soil investigation/confirmatory boreholes
a) Depth between 0m to 10m m
b) Depth between 10m to 20m m
c) Depth between 20m to 30m m
d) Depth between 30m to 40m m
4 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
G. Rehabilitation of Structures
6.49 Cleaning and removal of vegetation growth from structures, channel
Sqm.
and protective works as per directions of the Engineer.
6.50 Replacement of RCC railing including reinforcement as per MORT&H
Specifications Section 1500, 1600, 1700, 2200, 2815 and Clause 2703
5 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
c) Replacement of Damaged Bearings by elastomeric bearings
conforming to IRC 83 (Part II) Section IV after lifting the span by
suitable arrangement, all complete job with all accessories as per Cu.cm.
MORT&H Specifications Clause 2005 and approved by Engineer.
6.62 Providing and fixing new drainage spouts in replacement of existing
damaged drainage spouts for bridges complete as per Drawing and No.
MORT&H Specifications Clause 2705.
6.63 Supplying and fixing filler type expansion joints of 20 mm. wide
complete as per drawing and MORT&H Specifications Section 2600. m
6 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- -
6,228 -
650 -
8,658 -
422 -
2.0 -
77,942 -
- -
- -
2,523 -
- -
- -
27,009 -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
-
- -
7 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- -
- -
- -
- -
- -
- -
2,161 -
8 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- -
17,037 -
- -
4,830 -
2,598 -
58,199 -
5,174 -
3,248 -
2,397 -
216 -
1,505 -
271 -
8,939 -
2,514 -
9,035 -
543 -
175 -
39,295 -
1 -
5 -
8,563,200 -
328 -
1,192 -
1,997 -
745 -
2,146 -
1,150 -
2,308 -
885 -
83 -
9 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
1,483 -
742 -
- -
- -
- -
-
1,620
810
-
-
10 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
24,660 -
251 -
- -
1,160 -
- -
345 -
- -
- -
- -
- -
380 -
- -
- -
- -
11 of 150
The Louis Berger Group, Inc
BILL OF QUANTITIES
- -
5 -
- -
- -
- -
25
742
Sum -
12 of 150
BOT BOQ
Bill of Quantities
1. Telephone Lines m
2. Low tension Electric Lines m
3. OFC Cables m
4. Water lines m
5. Gas Pipelines (encasing in concrete and protective m
measures)
6. Shifting High tension Electric Lines m
7. Shifting High Tension Towers No.
1.07 Milling of existing bituminous surface with milling
machine mounted on 4 wheel with rear loading
conveyor system and mechanical drum drive complete
as per MORT&H specifications clause 202 and Cu.m.
additioanl specifications.
Sub Total
Sub Total
Bill No. 3 GRANULAR SUB-BASE AND BASE COURSES
3.01 Providing, laying & compacting Granular Sub-base at
OMC complete as per MORT&H Specifications Clause
401 (Grading–I of Table–400-1). Cu.m.
Sub Total
Bill No. 4 BITUMINOUS COURSES
4.01 Scarifying exisging bituminous road surface 50-70mm
along with pre-mix carpet and surface dressing but
without disturbing the base as per MORT&H Sqm.
specifications clause 501.
Sub Total
Bill No : 5 CULVERTS
5.01 Earthwork in excavation of foundation for structures
including pipe culverts in all types of soil including
lead & lifts complete as per drawings and MORT&H Cum.
specifications clauses 304 & 2903.
a) 900mm dia m
b) 1000mm dia m
c) 1200mm dia m
5.13 Providing & laying stone boulder apron complete as
per drg. & MORT&H specifications section 2500. Cum.
Sub Total
Bill No : 6 BRIDGES / FLY OVERS / UNDER PASSES / ROBS
6.01 Earthwork in excavation of foundations for structures
including all leads and lifts complete as per drawings
and MORT&H specifications clause 304.
a) Well curb
i) M-35 grade Cum. -
ii) M-30 grade Cum. -
b) Well steining
i) M-30 grade Cum. -
ii) M-25 grade Cum. -
c) Well cap
i) M-35 grade Cum. -
ii) M-30 grade Cum. -
d) Intermediate plug
i) M-25 grade Cum. -
e) Top plug Cum. -
i) M-25 grade Cum. -
6.07 Sinking of wells through all types of strata (other than
pneumatic method of sinking) for all water depths as
per site conditions complete as per drg. and MORT&H
specifications section 1200.
a) Solid slab
i) M-30 grade Cum. -
ii) M-35 grade Cum. 2,397
iii) M-40 grade Cum. -
b) T-beam and slab
i) M-30 grade Cum. -
ii) M-35 grade Cum. 1,505
iii) M-40 grade Cum. -
6.13 Providing & laying structural cement concrete for
prestressed concrete in super-structure including form
work but excluding the cost of reinforcement complete
as per drg. and MORT&H specifications sections
1500, 1700, 1800 & 2300.
a) Sliding bearing
i) Capacity 5000 KN No. -
ii) Capacity 3500 KN No. -
iii) Capacity 2000 KN No. 5
iv) Capacity 1750 KN No. -
v) Capacity 1200 KN No. -
vi) Capacity 1000 KN No. -
b) Fixed bearing
i) Capacity 5000 KN No. -
ii) Capacity 3500 KN No. -
iii) Capacity 2000 KN No. -
iv) Capacity 1750 KN No. 1
v) Capacity 1200 KN No. -
vi) Capacity 1000 KN No. -
c) Pin bearing
i) Capacity 5000 KN No. -
ii) Capacity 3500 KN No. -
iii) Capacity 2000 KN No. -
iv) Capacity 1750 KN No. -
v) Capacity 1200 KN No. -
vi) Capacity 1000 KN No. -
6.19 Providing & fixing of expansion joints complete as per
drg. and MORT&H specifications section 2600
Sub Total
Bill No. 8 TOLL PLAZA
a) 200mm dia m
8.25 Providing & Laying of Cement Concrete M-15 grade in
foundation for RCC drain as per drg. and MORT&H Cum.
specifications section 1500 & 1700.
8.26 Construction of brick masonry manhole chamber of
internal size 600 x 900 mm including reinforced
cement concrete M-20 grade cover slab with medium
duty MS manhole frame and cover, inside cement No.
plaster 1:3 with neat cement punning, C.C. benching
and pipe connections complete as per drawings and
direction of Engineer.
Sub Total
Bill No. 9 BUS BAYS
9.01 Clearing and grubbing road land including uprooting
rank vegetation, grass, bush scrubs, saplings and
trees of girth up to 300mm, removal and stacking of
serviceable material up to 100m from road boundary Ha
as per MORT&H specification clause 201.
Sub Total
Bill No. 10 TRUCK LAY BYES
10.01 Clearing and grubbing road land including uprooting
rank vegetation, grass, bush scrubs, saplings and
trees of girth up to 300mm, removal and stacking of
serviceable material up to 100m from road boundary Ha
as per MORT&H specification clause 201.
Sub Total
Bill No. 11 JUNCTIONS AND INTERSECTIONS
11.01 Clearing and grubbing road land including uprooting
rank vegetation, grass, bush scrubs, saplings and
trees of girth up to 300mm, removal and stacking of
serviceable material up to 100m from road boundary Ha
as per MORT&H specification clause 201.
Sub Total
Bill No. 12 TRAFFIC SIGNS, MARKINGS AND ROAD APPURTENCES.
12.01 Pavement marking with hot applied thermoplastic
paints with reflectorising glass beads conforming to
ASTM D36/BS-3262 (Part - I) as per drawing &
MORT&H Specifications Clause 803.
C) Informatory Signs
a) Kerb. Cum.
b) Kerb with channel Cum.
12.07 Providing and laying cement concrete M-15 in
foundation complete as per drawings and MORT&H
Specifications clause 408.
a) Kerb Lm
b) Kerb with channel. Lm
12.08 Providing and fixing reinforced cement concrete M-20
grade stones including excavation, foundation
concrete and reinforcement and inscription etc. all
complete as per MORT&H Specifications Section 800.
Sub Total
13.19 Providing & fixing 1.2 meters high G.I. barbed wire
fencing with 1.8m angle iron posts 40mm x 40mm x
6mm placed every metres contre to centre founded in
M-15 grade cement concrete, 0.6 metre below ground m
level, every 15th post, last but one end post and c
Sub Total
Bill No. 14 HIGHWAY LIGHTING
For 2 Leg Lighting
14.01 Project roads in urban / semi urban areas. Km
14.02 Approaches to fly over
14.03 Major junctions Nr.
14.04 Toll Plaza
14.05 Truck lay byes Nr.
14.06 Underpass Nr.
14.07 Base camp Nr.
For 1 Leg Lighting
14.01 Project roads in urban / semi urban areas. Km
14.02 Approaches to fly over
14.03 Major junctions
14.04 Toll Plaza
14.05 Truck lay byes
14.06 Bus bays
14.07 Base camp
Sub Total
Bill No. 15 ENVIRONMENT MITIGATION MEASURES
(As per D.P.R.)
1 Environmental monitoring during construction and 3
years thereafter = 48.96 lakhs considering 2/3 for
construction period only.
3 Compensatory afforestation.
4 Cost of planting new trees = Nos.
5 Plantation on water logged areas.
6 Plantation at Bus Parks / Truck Parks
Sub Total