Professional Documents
Culture Documents
Outupt Reactor For AC Drive, Frequency Inverter
Outupt Reactor For AC Drive, Frequency Inverter
English 中⽂
login register Item:0
Search
Product center -->Index > Drives peripheral equipment > Reactor > AC Output Reactor
Drives peripheral equipment allow the motor to run cooler by "smoothing" the motor current waveform.
Filter
Load reactors are also used on the output of AC Drives to reduce the effects of high motor wiring capacitance and to “soften” the dv/dt (high
Braking Unit And Braking
Resistor rates of change of voltage) applied to the motor windings.
Reactor This reactor is used for suppress the capacitive charging current of connection cable between inverter and motor, and passivating the voltage
rising rated of PWM as well. It is mounted at the output side of frequency inverter. When the distance of cable between inverter and motor
Zundrive is a China top over a value, suggest installed output rector to compensate recharge current of line capacitive.
manufacturer of AC drives, variable
speed drive, Solar Pump drive,Soft
Stater,Booster, Speed Controller...
Tel:86-0755-23283620, Product application
MP:86-13249062939
service@zundrive.com • Help meet IEEE 519 criteria by reducing harmonic distortion of the input line current.
• Reduce nuisance drive over-voltage trips caused by transient voltage spikes and power line notches.
• Protect input rectifiers from in-rush current caused by sudden power line surges and sags.
• Extend the life of the DC bus capacitor bank by reducing the internal heating caused by ripple current.
• Protect motor windings from long lead effects when used on the drive output.
The use of line and load reactors increases the reliability, performance, and efficiency of VFD systems, extends the life of both drives and
motors, and reduces the amount of energy consumed by the motor/drive system.
Working condition:
1. Working voltage: 220V/1140V
6. Operation environment: No need derated suing during -10℃to 45℃, if work in above 45℃, the rated current will be reduce 2% for every
1℃rising.
8. Voltage drop: < 4%, if large than this value, the output torque of inverter will be lower.
http://www.zundrive.com/output-reactor.html 1/2
02/05/2019 Outupt reactor for AC drive, frequency inverter
15. Running condition: temperature-25℃to 45℃, comparative moisture not over 90%.
http://www.zundrive.com/output-reactor.html 2/2