Professional Documents
Culture Documents
d6t Track-Type Tractor STD, XL Differential Steering Gct00001-Up (Machine) Powered by c9 Engine (Sebp4963 - 45) - Barra Equalizadora - Montar
d6t Track-Type Tractor STD, XL Differential Steering Gct00001-Up (Machine) Powered by c9 Engine (Sebp4963 - 45) - Barra Equalizadora - Montar
d6t Track-Type Tractor STD, XL Differential Steering Gct00001-Up (Machine) Powered by c9 Engine (Sebp4963 - 45) - Barra Equalizadora - Montar
Tela anterior
Bem-vindo: lnobrega
produtos: TRATOR DE TRACK-TYPE
Modelo: DCT TRACTOR TIPO TRACKOR GCT
Configuração: D6T TRATOR TIPO TRACK STD, XL Direção Diferencial
GCT00001-UP (MÁQUINA) MOVIDADO POR C9 Engine
i06660810
Procedimento de Montagem
tabela 1
Ferramentas Requeridas
D 1P-0520 Motorista 1
E 4C-4032 Bearing Mount 1
1P-1836 Bearing Puller Adapter 1
6V-3175 Double Acting Cylinder 1
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 1/5
10/03/2019 D6T TRACK-TYPE TRACTOR STD, XL Differential Steering GCT00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4963 - 4…
1. Make sure that the sealing surfaces of the seals and of the equalizer bar are smooth and clean.
Illustration 1 g01261050
Illustration 2 g00820096
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 2/5
10/03/2019 D6T TRACK-TYPE TRACTOR STD, XL Differential Steering GCT00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4963 - 4…
Illustration 3 g01261052
3. Use Tooling (B) to install bearing (9) until the bearing contacts retaining ring (7). Make sure that
bearing (9) is oriented square to the bore before you apply pressure with Tooling (B).
4. Use Tooling (A) to install retaining ring (7) in the equalizer bar.
5. Apply Tooling (E) to the outside surface of seals (8). Use Tooling (D) to install seals (8) in the
equalizer bar.
Illustration 4 g01261056
7. Place center bearing (10) in position. Make sure that bearing (10) is oriented square to the bore before
you apply pressure.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 3/5
10/03/2019 D6T TRACK-TYPE TRACTOR STD, XL Differential Steering GCT00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4963 - 4…
Illustration 5 g01261061
8. Use Tooling (F) to install two bearings (9) even with the front of the equalizer bar.
Note: You must adjust Tooling (F) several times during the installation of the center bearing.
Note: The seals for the center pin are different sizes. Make sure that the seals are installed in the
correct bores.
Illustration 6 g01261062
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 4/5
10/03/2019 D6T TRACK-TYPE TRACTOR STD, XL Differential Steering GCT00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4963 - 4…
Illustration 7 g01261066
11. Install plug (2), fitting (4), and O-ring seal (3).
End By:
a. Install the equalizer bar. Refer to Disassembly and Assembly, "Equalizer Bar - Install".
Direitos Autorais 1993 - 2019 Caterpillar Inc. Sun Mar 10 2019 06:54:13 GMT-0300 (Horário Padrão de Brasília)
Todos os Direitos Reservados.
lnobrega
Rede Particular Para Licenciados SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/productsearch/productheaderinfoframeset.jsp&called… 5/5