GB Awh 735 Programme Chart: E B H G

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GB AWH 735 PROGRAMME CHART

A. Programme selector This washing machine is equipped with


B. Programme sequence indicator automatic safety functions which detect and
B diagnose faults at an early stage and react
G appropriately:
E
H F. “Service” indication
C. “Start/Pause” button
F
G. “Water tap closed” indication
D. “Reset” button H. “Clean pump” indication
E. “Door open” indication D
1) Do not use liquid detergent.
2) For improved garment care, spin speed is restricted
A C to 400 rpm in this programme.

Max. Type of wash / Notes Detergents and Additives Special options Max.
Load Pre- Main Softener Half No Spin
Care wash Wash load spin Speed
Programme
Labels
Media Exclusión de
kg - for temperature selection, respect the manufacturer's recommendations on the care label carga Centrifugado rpm
Cotton with rewash 5.0 Heavily soiled whites such as bed linen, table linen, underwear and towels made of cotton and linen. Yes Yes 1)    500
95 °C 95°C

Cotton Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
5.0 – Yes    500
40 - 60 - 95 °C 40 - 60 - 95°C linen.

Synthetics with prewash Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
2.5 Yes Yes 1)    500
60 °C 60°C (Perlon, Nylon) or blends with cotton.

Synthetics Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
2.5 – Yes    500
30 - 40 - 60 °C 30 - 40 - 60°C Nylon) or blends with cotton.

Delicates 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. – Yes  –  500
30 °C 30°C
Quick wash 3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. – Yes  –  500
30 °C 30°C
Wool
1.0 Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. – Yes  –  500
Cold - 40 °C - 40°C
Handwash 1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. – Yes  –  400 2)
30 - 40 °C 30 - 40°C
Rinse & Spin – 5.0 Same as the last rinse and the final spin in the “Cotton” programme. – –  –  500

Spin – 5.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – – –  500

Gentle Spin – 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – – –  500

Drain – – Drain only - no spinning. – – – – – –

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

5019 612 10153


CONSUMPTION DATA PROGRAMME START PROGRAMME END
Temperature Load Water Energy Approx. Programme Open the tap and press the “Start/Pause” button. • All the lights of the programme sequence indicator
Programme Duration The indication lamp next to the “Start/Pause” button are off, and the “Door open” indication lights up.
(°C) (kg) (l) (kWh) (hours : minutes) lights up. The programme sequence indicator shows 1. Turn the programme selector to the “Off/O”
the current programme phase, running from left to right position.
Cotton 95 5.0 50* 1.70 2:05
through Wash, Rinse, Spin/Drain. When the programme 2. Close the water tap.
Cotton** 60 5.0 49 0.95 2:10 phrase is finised, the corresponding indication goes out. 3. Open the lid and drum and unload the machine.
Cotton 40 5.0 55 0.55 2:00 • Note: If there is a power interruption or if the 4. Leave the lid open for some time to allow the
appliance is disconnected during the cycle, the interior of the machine to dry.
Synthetics 60 2.5 50* 0.80 1:30
programme will run again from the point where it
Synthetics 40 2.5 45 0.45 1:15 was interrupted. CHANGE PROGRAMME AND/OR OPTIONS
Delicates 40 1.5 50 0.55 0:45 AFTER PROGRAMME START
“DOOR OPEN” INDICATION
Quick wash 30 3.0 35 0.40 0:30 1. Press the “Start/Pause” button to pause the
Before starting and after end of a programme, the lamp programme. The light flashes.
Wool 40 1.0 55 0.55 0:45 lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and 2. Select the new programme, any options and another
Handwash 40 1.0 40 0.40 0:35 spin speed if you want.
must on no account be forced open. In case you have
Prewash cycle increases programme duration by aproximately 20 min. Consumption values were measured in normalized conditions in 3. Press the “Start/Pause” button again. The new
compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to
an urgent need to open it during a running programme,
the water supply pressure and temperature, the load and the type of wash. refer to “Cancel (Reset) a running programme before programme continues at the same position where
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water the end”. the previous programme was interrupted. Do not
out. add detergent for this programme.
** Reference Programme for Energy Label.
RED INDICATIONS
CANCEL (RESET) A RUNNING PROGRAMME
“Service”
PREPARATION OF THE WASH CYCLE SELECT THE DESIRED OPTION(S) BEFORE THE END
Lighting up of the “Service” indication can be caused
1. Load the machine, close the drum doors and check Selecting or deselecting an option can be done at by a fault in an electrical component. Refer to the The “Reset” button cancels a programme before the
that they are properly locked. any time during the programme. The option will be “Troubleshooting Guide” in your “Instructions for Use”; end. Press the “Reset” button for at least 3 seconds.
2. Add detergent and additives into the dispenser to applied as long as the corresponding programme if the fault persists, contact our After Sales Service. Any existing water is drained out before the door can be
no more than the “MAX” level mark, as follows: phase has not been executed yet. opened.
“Water tap closed”
• Programme with pre and main wash “Half load” button
• Reduces water consumption, above all during rinsing. The appliance has no or insufficient water supply. Open
• Main wash programme without prewash the water tap: if the indications still lights up, refer to the
• Fabric softeners and conditioners • Suitable for lightly soiled laundry and small loads
(max. 3 kg for cotton, max. 1 kg for synthetics). “Troubleshooting Guide” in the Instructions for Use.
• Stain remover agents
• Anti-scale agents (if necessary) “No spin” button “Clean pump”
3. Close the lid. • Especially for delicate garments to avoid wear and Waste water is not pumped out. Check whether the
tear caused by the spin. drain hose is kinked or the filter must be cleaned: in the
4. Turn the programme selector to the desired
Note: with the “Cotton” and “Synthetics” latter case refer to the Instructions for Use (“Removing
programme and temperature. The lamp next to the
programmes, a short spin cycle is provided in any the Filter”).
“Start/Pause” button flashes. case, even if the “No spin” option has been selected,
in order to optimize rinsing results.

5019 612 10153

You might also like