Professional Documents
Culture Documents
ULMA Piping: Flange Technical Handbook
ULMA Piping: Flange Technical Handbook
ULMA Piping: Flange Technical Handbook
SIONS
ASME
B 16.5
WELDING
NECK
FLANGES
ASME
B 16.5
SLIP-ON
FLANGES
ASME
B 16.5
LAP
JOINT
FLANGES
ASME
B 16.5
BLIND
FLANGES
ASME
B 16.5
SOCKET
WELDING
FLANGES
ASME
B 16.5
THREA-
DED
FLANGES
Ulmz
FLANGE TECHNICAL HANDBOOK ULMA Piping
BRITISH
STD
B.S.
3293
ASME
B 16.47
SERIES
A
ASME
B 16.47
SERIES
B
APPENDIX
ULMA Piping - Headquarters
Registered Name: ULMA Forja, S.Coop.
Bo Zubillaga, 3 - P.O. Box 14
20560 Oñati
Gipuzkoa - Spain
www.ulmapiping.com
NOTICE:
While ULMA undertakes to ensure that the technical specifications contained in this document are as accurate as possible, we cannot guarantee the
absence of typographical or other errors in this catalogue. Customers are advised not to rely exclusively on the information contained herein. ULMA
specifically disclaims any warranty, whether expressed or implied, of fitness for purpose, merchantability or for any other purpose, based on reliance
on the information contained in this catalogue.
DIMEN-
SIONS
5_7 COMPANY PROFILE
8_9 FLANGE TYPES
13 _ 13 PRODUCTION RANGE
14 _ 15 GENERAL SURVEY AND TECHNICAL TERMS OF DELIVERY
ASME
16 _ 23 DIMENSIONS OF WELDED AND SEAMLESS STEEL PIPE B 16.5
25 _ 28 RING JOINT FACINGS
WELDING
29 _ 30 LARGE AND SMALL MALE/FEMALE FACING NECK
FLANGES
LARGE AND SMALL TONGUE/GROOVE FACINGS
150-2500 LB/SQ.IN.
31 _ 32 DIMENSIONAL TOLERANCES
ASME
33 _ 33 FACING/WELDING ENDS B 16.5
SLIP-ON
34 _ 13 WELDING NECK & BLIND FLANGES FLANGES
ACC. TO B 16.5
44 _ 51 SLIP-ON FLANGES
ACC. TO B 16.5
ASME
52 _ 61 LAP JOINT FLANGES B 16.5
ACC. TO B 16.5 LAP
JOINT
62 _ 71 BLIND FLANGES FLANGES
ACC. TO B 16.5
72 _ 75 SOCKET WELDING FLANGES
ACC. TO B 16.5 ASME
76 _ 85 THREADED FLANGES B 16.5
ACC. TO B 16.5 BLIND
FLANGES
ASME
98 _ 111 WELDING NECK AND BLIND FLANGES B 16.5
Ulmz
INDEX
BRITISH
STD
B.S.
3293
ASME
B 16.47
SERIES
A
ASME
B 16.47
SERIES
B
APPENDIX
4
5
www.ulmapiping.com
refining.
The company, established in 1962, is located in the
town of Oñati in the Basque Country of northern Spain,
an area with a deep-rooted industrial tradition.
We are equipped with the most modern facilities and
a highly qualified workforce, enabling us to offer the
widest possible range of flanges. Our product line em-
bodies the highest standards in quality, productivity
and dependability. This, combined with our cutting-
edge technology, experience and tradition of excellen-
ce, has led to our unrivalled reputation for quality and
service. Management systems based on the strictest
quality standards allow ULMA to develop the products
and services that best satisfy our customers’ needs of
flanges and high quality pressure fittings.
6
EFFICIENT PERFORMANCE
Our highly motivated staff, efficient production system and
cutting-edge technology allow us to supply products of the
highest quality with tight turnaround times, enabling us to
meet the demands of our customers under even the most
challenging circumstances.
RELIABLE DELIVERY
8
This group of flanges is designed with a hub on the These flanges are similar to slip-on flanges ex-
backside tapering to a diameter that will match the cept they have a bore diameter equal to that of
pipe to which it will be welded. These flanges are the matching pipe. They also have a counterbore
bored to match the inside diameter of the mating from the hub side slightly larger than the outside
pipe so there will be no restriction of product flow. diameter of the matching pipe. The counterbore
This prevents turbulence at the joint and reduces provides a “socket” into which the end of the pipe
erosion. Welding neck flanges are preferred for is inserted. The flange is then attached to the pipe
use in severe service applications involving high by a fillet weld at the hub. The shoulder made by
pressure, sub-zero and/or elevated temperatu- the difference between the bore and counterbore
res. They also provide excellent stress distribution is the same width as the wall of the pipe, there-
through the tapered hub and are easily radiogra- by providing for an unrestricted flow of product
phed for flaw detection. through the connection. These flanges were initia-
lly developed for use in small diameter, high- pres-
sure lines. Internally welded socket type flanges
are typically used in chemical processes, hydraulic
lines and steam distribution lines.
Used in conjunction with a “Lap Joint Stub End,” Slip-on flanges are designed to slide over the outsi-
these flanges are nearly identical to a slip-on flange de diameter of the pipe to which it will be welded.
with the exception of a radius at the intersection of These flanges are attached to the pipe by fillet wel-
the flange face and the bore to accommodate the ding at the hub and at the end of the pipe inside
flanged portion of the stub end. These flanges are the flange. Because of the low hub and method of
used in applications where the jo int must be fre- attachment, these flanges are not normally used in
quently disassembled for cleaning or where there high stress applications.
is a need to facilitate bolt alignment.
FLANGE TYPES
FLANGE TYPES
9
These flanges are manufactured without a bore Designed for flow metering systems. Two of the-
and used as closures or seals for the ends of piping se flanges with bolts and jack screws are called an
systems. They are also used to provide access co- “orifice flange union” and are used in conjunction
vers for pressure vessels. Blind flanges are provided with an “orifice plate.” The orifice plate is a se-
with or without a hub, depending on customer re- parate commodity and is not sold as a part of the
quirements. Under pressure and bolt loading, the flange assembly. Each flange is provided with a
blind flange is subjected to more stresses than any pair of pressure taps for measurement of pressure
other flange type. However, the maximum stresses drop in the flow through the orifice plate. The taps
are bending stresses at the center and are easily are precisely located with respect to the orifice
absorbed by the flange. plate. Orifice flanges may be provided in one of
three types of flanges: Welding Neck, Slip On and
Threaded.
Threaded flanges are threaded in the bore to Designed for use in changing diameters in a piping
match an external thread on the pipe. The threads system. A reducing flange consists of a flange with
are tapered to create a seal between the flange one specified diameter having a bore of a different
and pipe as the tapers approach the same diame- and smaller, diameter. Except for the bore and hub
ter. These flanges are normally designed for low dimensions, the flange will have dimensions of the
pressure, non-cyclic applications. They are also larger pipe size. Reducing flanges are normally pro-
used in applications where welding is hazardous. vided as one of three types: Welding Neck, Slip On
and Threaded.
FLANGE TYPES
10
Ulmz
11 DIMEN-
SIONS
DIMENSIONS
12 DIMENSIONS DIMENSIONS
DIMENSIONS 13 DIMEN-
SIONS
PRODUCTION RANGE
When using printed standards, the most recent issue of the original version shall prevail
Nominal Pressure
Ib/sq. in.
Orifice 1 300-2500
TYPE OF FLANGE
Nominal Pressure lb/sq. in. 150 300 400 600 900 1500 2500
10,6 21,1 28,1 42,2 63,3 106 176
104 207 276 414 621 1030 1726
Welding Neck Flanges 24” 24” 24” 24” 24” 24” 12”
Lap Joint Flanges 24” 24- 24” 24” 24” 24” 12”
*) for larger flanges than 24- see B. S. 3293, ASME 16.47 Series A and B
Example of Marking
Flanges are marked as required in ASME B 16.5 with the following datas:
Manufacturer’s name or trade mark
B 16
Nominal size
Primary service pressure
Material designation
Heat code
Schedule No.
Ring Number only when using Ring Joint Flanges
DIMENSIONS 15 DIMEN-
SIONS
f 1)
R 0,06” ±0,03”
ASME B 16.5
23º + 1/2º F+ 0,008”=0,2 mm R 1,6 mm ±0,8 mm
-
p E F r
3/4” 3/4” 1/2” R13 1,688 0,250 0,344 0,03 2,50 2,56
42,9 6,4 8,7 0,8 63,5 65,0
11/4” 11/4” 11/4” 1” R18 2,375 0,250 0,344 0,03 3,12 3,19 3,25
60,3 6,4 8,7 0,8 79,2 81,0 82,6
11/2” 11/2” 11/2” R20 2,688 0,250 0,344 0,03 3,55 3,62
68,3 6,4 8,7 0,8 90,4 91,9
f 1)
R 0,06” ±0,03”
ASME B 16.5
23º + 1/2º F+ 0,008”=0,2 mm R 1,6 mm ±0,8 mm
-
*) For ring joint with lapped flanges in the 300 and 600 lb standards ring and groove number R30 are used instead of R31.
DIMENSIONS 27 DIMEN-
SIONS
f 1)
R 0,06” ±0,03”
ASME B 16.5
23º + 1/2º F+ 0,008”=0,2 mm R 1,6 mm ±0,8 mm
-
10” 10” 10” 10” R53 12,750 0,312 0,469 0,03 14,00 14,25
323,9 7,9 11,9 0,8 355,6 362,0
12” 12” 12” 12” R57 15,000 0,312 0,4691 0,03 16,25 16,50
381,0 7,9 11,9 0,8 412,8 419,1
f 1)
R 0,06” ±0,03”
ASME B 16.5
23º + 1/2º F+ 0,008”=0,2 mm R 1,6 mm ±0,8 mm
-
s g s g
T g T U g U
small large small large
male male male male small large smallsmall and
largelarge small and large
tongue tongue tongue tongue
tonque tonque
ASME B 16.5
0,19”=4,8mm 0,19”=4,8mm
0,25”=6,4 mm 0,25”=6,4 mm
0,25”=6,4 mm 0,25”=6,4 mm 0,19”=4,8mm 0,19”=4,8mm
s g s g K Y L KW Y Z L W Z
T g T U g U K X W LK X W L
small large small large small largesmall small and
large
large small and large
male male male male small large smallsmall and
largelarge small
small and large large small large groove groove
groove groove
groove groove
tongue tongue tongue tonque
tongue tonque female femalefemale female
Nom. Outside diameter in/ mm Inside Outside diameter in./ Inside diameter
Pipe dia. mm dia. of raised Face
size 0,19”=4,8mm
of Large
0,19”=4,8mm
of Large min. in./ mm
0,19”=4,8mm
dN
0,19”=4,8mm
Large small small and Large small small and
Male Male tongue small Fema- Female groove small small Large
and Tongue le and groove Female Female
Large in/mm Large in./ mm and gro- and
Tongue K Y L KW Y Z L W Z
groove ove groove
K X W LK X W L
small largesmall small and
large
large small and large
small large small large groove groove
groove groove
groove groove
female femalefemale female
g s T U W x y Z k L
1/2” 1,38 0,72 1,38 1,00 1,44 0,78 1,44 0,94 1,75 1,81
35,1 18,3 35.1 25,4 36,6 19,8 36,6 23,9 44,5 46,0
3/4” 1,69 0,941 1,69 1,31 1,75 1,00 1,75 1,25 2,06 2,12
42,9 23,9 42,9 33,3 44,5 25,4 44,5 31,8 52,3 53,8
1” 2,00 1,19 1,88 1,50 2,06 1,25 1,94 1,44 2,25 2,44
50,8 30,2 47,8 38,1 52,3 31,8 49,3 36,6 57,2 62,0
11/4” 2,50 1,50 2,25 1,88 2,56 1,56 2,31 1,81 2,62 2,94
63,5 38,1 57,2 47,8 65,0 39,6 58,7 46,0 66,5 74,7
11/2” 2,88 1,75 2,50 2,12 2,94 1,81 2,56 2,06 2,88 3,31
73,2 44,5 63,5 53,8 74,7 46,0 65,0 52,3 73,2 84,1
2” 3,62 2,25 3,25 2,88 3,69 2,31 3,31 2,81 3,62 4,06
91,9 57,2 82,6 73,2 93,7 58,7 84,1 71,4 91,9 103,1
21/2“ 4,12 2,69 3,75 3,38 4,19 2,75 3,81 3,31 4,12 4,56
104,6 68,3 95,3 85.9 106,4 69,9 96,8 84.1 104,6 115,8
3” 5,00 13,31 4,62 4,25 5,06 3,38 4,69 4,19 5,00 5,44
127,0 84,1 117,3 108,0 128,5 85,9 119,1 106,4 127,0 138,2
31/2” 5,50 3,81 5,12 4,75 5,56 3,88 5,19 4,69 5,50 5,94
139,7 96,8 130,0 120,7 141,2 98,6 131,8 119,1 139,7 150,9
4” 6,19 4,31 5,69 5,19 6,25 4,38 5,75 5,12 6,19 6,62
157,2 109,5 144,5 131,8 158,8 111,3 146,1 130,0 157,2 168,1
Large male and female face and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
30 DIMENSIONS DIMENSIONS
s g s g
T g U T g U
small large small large
male male male male small large small and large small large small and large
tongue tongue tonque tongue tongue tonque
ASME B 16.5
0,19”=4,8mm 0,19”=4,8mm
0,25”=6,4 mm 0,25”=6,4 mm
0,19”=4,8mm 0,25”=6,4 mm 0,19”=4,8mm 0,25”=6,4 mm
s g s g K Y L W Z K Y L W Z
K X WT L g U K X T W L g U
small large small large small large small and large small large small and large
male male male male small large
small large small
small and large largegroove
small large groove
small and largegroove groove groove groove
female female
tongue tongue tonque female female tongue
tongue tonque
Nom. Outside diameter in./ mm Inside Outside diameter in./ mm Inside diameter
Pipe dia. dia. of raised Face
size of Large
0,19”=4,8mm
Large small
0,19”=4,8mm
small of Large min. in./ mm
ON0,19”=4,8mm 0,19”=4,8mm and Female Female groove and
Large small small small and small small Large
Male Male Tongue Tongue Large groove Female Female
and in./ groove in./ mm and gro- and gro-
Large mm ove ove
K X W
Tongue
L K X W L
K Y L W Z K Y L W Z
small large small and large small large small and large
small large small large groove groove groove groove groove groove
female female female female
g s T U W x y Z k L
5” 7,31 5,38 6,81 6,31 7,38 5,44 6,88 6,25 7,31 7,75
185,7 136,7 173,0 160,3 187,5 138,2 174,8 158,8 185,7 196,9
6” 8,50 6,38 8,00 7,50 8,56 6,44 8,06 7,44 8,50 8,94
215,9 162,1 203,2 190,5 217,4 163,6 204,7 189,0 215,9 227,1
8” 10,62 8,38 10,00 9,38 10,69 8,44 10,06 9,31 10,62 11,06
269,7 212,9 254,0 238,3 271,5 214,4 255,5 236,5 269,7 280,9
10” 12,75 10,50 12,00 11,25 12,81 10,56 12,06 11,19 12,75 13,19
323,9 266,7 304,8 285,8 325,4 268,3 306,3 284,2 323,9 335,0
12” 15,00 12,50 14,25 13,50 15,06 12,56 14,31 13,44 15,00 15,44
381,0 317,5 362,0 342,9 382,5 319,0 363,5 341,4 381,0 392,2
14” 16,25 13,75 15,50 14,75 16,31 13,81 15,56 14,69 16,25 16,69
412,8 349,3 393,7 374,7 414,3 350,8 395,2 373,1 412,8 423,9
16” 18,50 15,75 17,62 16,75 18,56 15,81 17,69 16,69 18,50 18,94
469,9 400,1 447,5 425,5 471,4 401,6 449,3 423,9 469,9 481,1
18” 21,00 17,75 20,12 19,25 21,06 17,81 20,19 19,19 21,00 21,44
533,4 450,9 511,0 489,0 534,9 452,4 512,8 487,4 533,4 544,6
20” 23,00 19,75 22,00 21,00 23,06 19,81 22,06 20,94 23,00 23,44
584,2 501,7 558,8 533,4 585,7 503,2 560,3 531,9 584,2 595,4
24” 27,25 23,75 26,25 25,25 27,31 23,81 26,31 25,19 27,25 27,69
692,2 603,3 666,8 641,4 693,7 604,8 668,3 639,8 692,2 703,3
Large male and female face and large tongue and groove are not applicable to Class 150 because of potential dimensional conflicts.
DIMENSIONS 31 DIMEN-
SIONS
DIMENSIONAL TOLERANCES mø
371/2”
lø h
Jø
gø
kø
Dø
ASME B 16.5
mø kø
aø mø
0,06”=1,6mm
Jø
lø
371/2”
p
h
lø h
b
Jø
b
cø
gø gø
kø
Dø Dø
kø
D Outside Diameter
mø
1) When OD is 24” or less ± 0,06”
When OD is over 24” ± 0,12”
Jø ± 1,6 mm
lø ± 3,2 mm
p
J,c Inside Diameter 2) 10” and
h smaller +0,03”
12”bto 18” +0,06”
20” and larger +0,12” - 0,06”
cø +0,8 mm
+ 1,6 mm
gø
+3,2 mm - 1,6 mm
Dø
0.8mm
1.6 mm
h Overall Length through Hub 4” and smaller ± 0,06”
5” to 10” +0,06”, -0,12”
12” and larger +0,12”, -0,18”
± 1,6mm
+ 1,6 mm, -3,2 mm
+3,2mm, -4,6mm
b Thickness 18” and smaller +0,12”
20” and larger +0,19”
+3,2 mm
+4,8 mm
DIMENSIONAL mø
TOLERANCES lø
Jø
kø
Dø
ASME B 16.5
± 1,6 mm
± 0,8 mm
0,8 mm
1,6 mm
h 18” and smaller +0,12” - 0,03”
Overall Length of 20” and larger +0,19” - 0,03”
Hub 1) +3,2 mm - 0,8 mm
+4,8 mm - 1,6 mm
FACINGS
Facing is made by mechanical turning, resulting the following surface conditions:
Ra ‹=3,2
,6
‹1
Ra[µm]
Ra [µm]
FACINGS
DICHTFLÄCHENBEARBEITUNG
WELDING ENDS
WELDING ENDS
a = Outside diameter of pipe
aø
J = Inside diameter of pipe aø
t
t
t = Wall thickness of pipe 0,06” ±0,03” =
0,06” ±0,03” =
1,6mm ±0,8mm
37 1/2 º ± 2 1/2º 1,6mm ±0,8mm 37 1/2 º ± 2 1/2º
min.Radius 0,12”=3,0mm
Jø min.0,25”=6,4mm
Jø
min.0,25”=6,4mm
7ºmax 0,75”
19mm 10º±1º
45ºmax 7º max
45ºmax
mø
mø
Bevel for Wall Thicknesses (t) 0,19” to 0,88” inclusive Bevel for Wall Thicknesses (t) greater than 0,88”
34
Ulmz
35
0,06” ±1,6mm
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx
Face Weight
3/4” 1,05 3,88 0,82 0,44 2 1,05 1 ,50 1,69 4 0,62 2,75 0,71
26,7 98,6 20,8 11,1 50,7 26,7 38,1 42,9 15,7 69,9
1” 1,315 4,25 1,05 0,5 2,13 1,315 1,94 2,00 4 0,62 3,12 1,01
33.4 108,0 26,7 12,6 54 33.4 49,3 50,8 15,7 79,2
11/4” 1,66 4,62 1,38 0,56 2,19 1,66 2,31 2,50 4 0,62 3,50 1,33
42,2 117,3 35,1 14,1 55,6 42,2 58,7 63,5 15,7 88,9
11/2” 1,90 5,00 1,61 0,63 2,38 1,90 2,56 2,88 4 0,62 3,88 1,72
48,3 127,0 40,9 15,9 60,4 48,3 65,0 73,2 15,7 98,6
2” 2,375 6,00 2,07 0,69 2,44 2,375 3,06 3,62 4 0,75 4,75 2,58
60,3 152.4 52,6 17,5 61,9 60,3 77,7 91,9 19,1 120,7
21/2” 2,875 7,00 2,47 0,82 2,69 2,875 3,56 4,12 4 0,75 5,50 4,11
73,0 177,8 62,7 20,8 68,3 73,0 90.4 104,6 19,1 139,7
3” 3,50 7,50 3,07 0,88 2,69 3,50 4,25 5,00 4 0,75 6,00 4,92
88,9 190,5 78,0 22,3 68,3 88,9 108,0 127,0 19,1 152.4
31/2” 4,00 8,50 3,55 0,88 2,75 4,00 4,81 5,50 8 0,75 7,00 6,08
101,6 215,9 90,2 22,3 69,8 101,6 122,2 139,7 19,1 177,8
4” 4,50 9,00 4,03 0,88 2,94 4,50 5,31 6,19 8 0,75 7,50 6,84
114,3 228,6 102.4 22,3 74,6 114,3 134,9 157,2 19,1 190,5
5” 5,563 10,00 5,05 0,88 3,44 5,563 6.44 7,31 8 0,88 8,50 8,56
141,3 254,0 128,3 22,3 87,3 141,3 163,6 185,7 22.4 215,9
6” 6,625 11,00 6,07 0,94 3,44 6,625 7,56 8,50 8 0,88 9,50 10,6
168,3 279.4 154,2 23,8 87,3 168,3 192,0 215,9 22.4 241,3
8” 8,625 13,50 7,98 1,06 3,94 8,625 9,69 10,62 8 0,88 11,75 17,6
219,1 342,9 202,7 26,8 100 219,1 246,1 269,7 22.4 298,5
10” 10,75 16,00 10,02 1,13 3,94 10,75 12,00 12,75 12 1,00 14.25 24,0
273 406.4 254,5 28,6 100 273 304,8 323,9 25.4 362,0
12” 12,75 19,00 12,00 1,19 4,44 12,75 14,38 15,00 12 1,00 17,00 36,5
323,8 482,6 304,8 30,2 112,7 323,8 365,3 381,0 25.4 431,8
14” 14,0 21,00 1,32 4,94 14,0 15,75 16,25 12 1,12 18,75 48.4
To be specified by the purchaser
16” 16,0 23,50 1,38 4,94 16,0 18,00 18,50 16 1,12 21,25 60,6
406,4 596,9 35 125,4 406,4 457,2 469,9 28.4 539,8
18” 18,0 25,00 1,5 5,44 18,0 19,88 21,00 16 1,25 22,75 68,3
457,2 635,0 38 138,1 457,2 505,0 533.4 31,8 577,9
20” 20,0 27,50 1,63 5,63 20,0 22,00 23,00 20 1,25 25,00 84,5
508 698,5 41,3 142,9 508 558,8 584,2 31,8 635,0
24” 24,0 32,00 1,82 5,94 24,0 26,12 27,25 20 1,38 29,50 115
609,6 812,8 46,2 150,8 609,6 663.4 692,2 35,1 749,3
DIMEN-
WELDING NECK FLANGES 37 SIONS
WELDING
NECK
WELDING NECk FLANGES 150
300
0,06” ±1,6mm
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1,05 4,62 0,82 0,56 2,19 1,05 1,88 1,69 4 0,75 3,25 1,26
26,7 117,3 20,8 14,1 55,6 26,7 47,8 42,9 19,1 82,6
1” 1,315 4,88 1,05 0,63 2,38 1,315 2,12 2,00 4 0,75 3,50 1,52
33,4 124,0 26,7 15,9 60,4 33,4 53,8 50,8 19,1 88,9
11/4” 1,66 5,25 1,38 0,69 2,5 1,66 2,50 2,50 4 0,75 3,88 2,03
42,2 133,4 35,1 17,5 63,4 42,2 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,61 0,75 2,63 1,90 2,75 2,88 4 O,88 4,50 2,89
48,3 155,4 40,9 19 66,7 48,3 69,9 73,2 22,4 114,3
2” 2,375 6,50 2,07 0,82 2,69 2,375 3,31 3,62 8 0,75 5,00 3,40
60,3 165,1 52,6 20,8 68,3 60,3 84,0 91,9 19,1 127,0
21/2” 2,875 7,50 2,47 0,94 2,94 2,875 3,94 4,12 8 O,88 5,88 5,17
73,0 190,5 62,7 23,8 74,6 73,0 100,1 104,6 22,4 149,4
3” 3,50 8,25 3,07 1,06 3,06 3,50 4,62 5,00 8 0,88 6,62 6,93
88,9 209,6 78,0 26,8 77,6 88,9 117,3 127,0 22,4 168,1
31/2” 4,00 9,00 3,55 1,13 3,13 4,00 5,25 5,50 8 0,88 7,25 8,67
101,6 228,6 90,2 28,6 79,4 101,6 133,4 139,7 22,4 184,2
4” 4,50 10,00 4,03 1,19 3,32 4,50 5,75 6,19 8 0,88 7,88 11,2
114,3 254,0 102,4 30,2 84,3 114,3 146,1 157,2 22,4 200,2
5” 5,563 11,00 5,05 1,32 3,82 5,563 7,00 7,31 8 O,88 9,25 15,1
141,3 279,4 128,3 33,5 97 141,3 177,8 185,7 22,4 235,0
6” 6,625 12,50 6,07 1,38 3,82 6,625 8,12 8,50 12 0,88 10,62 19,1
168,3 317,5 154,2 35 97 168,3 206,2 215,9 22,4 269,7
8” 8,625 15,00 7,98 1,56 4,32 8,625 10,25 10,62 12 1,00 13,00 29,9
219,1 381,0 202,7 39,5 109,7 219,1 260,4 269,7 25,4 330,2
10” 10,75 17,50 10,02 1,82 4,56 10,75 12,62 12,75 16 1,12 15,25 42,7
273 444,5 254,5 46,2 115,7 273 320,5 323,9 28,4 387,4
12” 12,75 20,50 12,00 1,94 5,06 12,75 14,75 15,00 16 1,25 17,75 61,8
323,8 520,7 304,8 49,2 128,4 323,8 374,7 381,0 31,8 450,9
14” 14,00 23,00 2,06 5,56 14,00 16,75 16,25 20 1,25 20,25 85,8
To be specified by the purchaser
16” 16,00 25,50 2,19 5,69 16,00 19,00 18,50 20 1,38 22,50 106
406,4 647,7 55,6 144,5 406,4 482,6 469,9 35,1 571,5
18” 18,00 28,00 2,32 6,19 18,00 21,00 21,00 24 1,38 24,75 131
457,2 711,2 58,9 157,2 457,2 533,4 533,4 35,1 628,7
20” 20,00 30,50 2,44 6,32 20,00 23,12 23,00 24 1,38 27,00 158
508 774,7 61,9 160,5 508 587,2 584,2 35,1 685,8
24” 24,00 36,00 2,69 6,56 24,00 27,62 27,25 24 1,62 32,00 230
609,6 914,4 68,2 166,5 609,6 701,5 692,2 41,1 812,8
38 DIMENSIONS WELDING NECK FLANGES
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1.05
26,7
1” 1,315
33,4
11/4” 1,66
42,2
Use 600 Ib dimensions for these sizes
11/2” 1,90
48,3
2” 2,375
60,3
21/2” 2,875
73,0
3” 3,50
88,9
31/2” 4,00
101,6
4” 4,50 10,00 1,38 3,50 4,50 5,75 6,19 8 1,00 7,88 12,8
114,3 254,0 35,1 88,9 114,3 146,1 157,2 25,4 200,2
5” 5,563 11,00 1,50 4,00 5,563 7,00 7,31 8 1,00 9,25 16,9
141,3 279,4 38,1 101,6 141,3 177,8 185,7 25,4 235,0
6” 6,625 12,50 1,62 4,06 6,625 8,12 8,50 12 1,00 10,62 22,0
168,3 317,5 41,1 103,1 168,3 206,2 215,9 25,4 269,7
8” 8,625 15,00 1,88 4,62 8,625 10,25 10,62 12 1,12 13,00 34,7
219,1 381,0 47,8 117,3 219,1 260,4 269,7 28,4 330,2
To be specified by the purchaser
10” 10,75 17,50 2,12 4,88 10,75 12,62 12,75 16 1,25 15,25 48,5
273 444,5 53,8 124,0 273 320,5 323,9 31,8 387,4
12” 12,75 20,50 2,25 5,38 12,75 14,75 15,00 16 1,38 17,75 69,6
323,8 520,7 57.2 136,7 323,8 374,7 381,0 35,1 450,9
14” 14,0 23,00 2,38 5,88 14,0 16.75 16,25 20 1,38 20,25 95,5
355,6 584,2 60,5 149,4 355,6 425,5 412,8 35,1 514,4
16” 16,0 25,50 2,50 6,00 16,0 19,00 18,50 20 1,50 22.50 118
406,4 647,7 63,5 152,4 406,4 482,6 469,9 38,1 571,5
18” 18,0 28,00 2,62 6,50 18,0 21,00 21,00 24 1,50 24,75 145
457,2 711,2 66.5 165,1 457,2 533,4 533,4 38,1 628,7
20” 20,0 30.50 2,75 6,62 20,0 23,12 23,00 24 1,62 27,00 173
508 774,7 69,9 168,1 508 587,2 584,2 41,1 685,8
24” 24,0 36,00 3,00 6,88 24,0 27,62 27,25 24 1,88 32,00 249
609,6 914,4 76,2 174,8 609,6 701,5 692,2 47,8 812,8
DIMEN-
WELDING NECK FLANGES 39 SIONS
WELDING
NECK
WELDING NECk FLANGES 400
600
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1,05 4,62 0,62 2,25 1,05 1,88 1,69 4 0,75 3,25 1,45
26,7 117,3 15,7 57,2 26,7 47,8 42,9 19,1 82,6
1” 1,315 4,88 0,69 2,44 1,315 2,12 2,00 4 0,75 3,50 1,76
33,4 124,0 17,5 62,0 33,4 53,8 50,8 19,1 88,9
11/4” 1,66 5,25 0,81 2,62 1,66 2,50 2,50 4 0,75 3,88 2,49
42,2 133,4 20,6 66,5 42,2 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 0,88 2,75 1,90 2,75 2,88 4 0,88 4,50 3,49
48,3 155,4 22,4 69,9 48,3 69,9 73,2 22,4 114,3
2” 2,375 6,50 1,00 2,88 2,375 3,31 3,62 8 0,75 5,00 4,36
60,3 165,1 25,4 73,2 60,3 84,1 91,9 19,1 127,0
21/2” 2,875 7,50 1,12 3,12 2,875 3,94 4,12 8 0,88 5,88 6,43
73,0 190,5 28,4 79,2 73,0 100,1 104,6 22,4 149,4
3” 3,50 8,25 1,25 3,25 3,50 4,62 5,00 8 0,88 6,62 8,53
88,9 209,6 31,8 82,6 88,9 117,3 127,0 22,4 168,1
31/2” 4,00 9,00 1,38 3,38 4,00 5,25 5,50 8 1,00 7,25 10,7
101,6 228,6 35,1 85,9 101,6 133,4 139,7 25,4 184,2
To be specified by the purchaser
4” 4,50 10,75 1,50 4,00 4,50 6,00 6,19 8 1,00 8,50 17,4
114,3 273,1 38,1 101,6 114,3 152,4 157,2 25,4 215,9
5” 5,563 13,00 1,75 4,50 5,563 7,44 7,31 8 1,12 10,50 29,2
141,3 330,2 44,5 114,3 141,3 189,0 185,7 28,4 266,7
6” 6,625 14,00 1,88 4,62 6,625 8,75 8,50 12 1,12 11,50 34,9
168,3 355,6 47,8 117,3 168,3 222,3 215,9 28,4 292,1
8” 8,625 16,50 2,19 5,25 8,625 10,75 10,62 12 1,25 13,75 53,9
219,1 419,1 55,6 133,4 219,1 273,1 269,7 31,8 349,3
10” 10,75 20,00 2,50 6,00 10,75 13,50 12,75 16 1,38 17,00 86,5
273 508,0 63,5 152,4 273 342,9 323,9 35,1 431,8
12” 12,75 22,00 2,62 6,12 12,75 15,75 15,00 20 1,38 19,25 103
323,8 558,8 66,5 155,4 323,8 400,1 381,0 35,1 489,0
14” 14,0 23,75 2,75 6,50 14,0 17,00 16,25 20 1,50 20,75 122
355,6 603,3 69,9 165,1 355,6 431,8 412,8 38,1 527,1
16” 16,0 27,00 3,00 7,00 16,0 19,50 18,50 20 1,62 23,75 170
406,4 685,8 76,2 177,8 406,4 495,3 469,9 41,1 603,3
18” 18,0 29,25 3,25 7,25 18,0 21,50 21,00 20 1,75 25,75 204
457,2 743,0 82,6 184,2 457,2 546,1 533,4 44,5 654,1
20” 20,0 32,00 3,50 7,50 20,0 24,00 23,00 24 1,75 28,50 254
508 812,8 88,9 190,5 508 609,6 584,2 44,5 723,9
24” 24,0 37,00 4,00 8,00 24,0 28,25 27,25 24 2,00 33,00 358
609,6 939,8 101,6 203,2 609,6 717,6 692,2 50,8 838,2
40 DIMENSIONS WELDING NECK FLANGES
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1,05
26,7
1” 1,315
33,4
11/2” 1,90
48,3
2” 2,375
60,3
21/2“ 2,875
73.0
3” 3,50 9,50 1,50 4,00 3,50 5,00 5,00 8 1,00 7,50 13,7
88,9 241,3 38,1 101,6 88,9 127,0 127,0 25,4 190,5
4” 4,50 11,50 1,75 4,50 4,50 6,25 6,19 8 1,25 9,25 22,5
114,3 292,1 44,4 114,3 114,3 158,7 157,2 31,8 234,9
5” 5,563 13,75 2,00 5,00 5,563 7,50 7,31 8 1,38 11,00 37,4
141,3 349,3 50,8 127,0 141,3 190,5 185,7 35,1 279,4
6” 6,625 15,00 2,19 5,50 6,625 9,25 8,50 12 1,25 12,50 47,7
To be specified by the purchaser
8” 8,625 18,50 2,50 6,38 8,625 11,75 10,62 12 1,50 15,50 81,3
219,1 469,9 63,S 162,1 219,1 298,5 269,7 38,1 393,7
10” 10,75 21,50 2,75 7,25 10,75 14,50 12,75 16 1,50 18,50 119
273 546,1 69,9 184,2 273 368,3 323,9 38,1 469,9
12” 12,75 24,00 3,12 7,88 12,75 16,50 15,00 20 1,50 21,00 157
323,8 609,6 79,2 200,2 323,8 419,1 381,0 38,1 533,4
14” 14,0 25,25 3,38 8,38 14,0 17,75 16,25 20 1,62 22,00 180
355,6 641,4 85,9 212,9 355,6 450,9 412,8 41,1 558,8
16” 16,0 27,75 3,50 8,50 16,0 20,00 18,50 20 1.75 24,25 217
406,4 704,9 88,9 215,9 406,4 508,0 469,9 44,5 616
18” 18,0 31,00 4,00 9,00 18,0 22,25 21,00 20 2,00 27,00 292
457,2 787,4 101,6 228,6 457,2 565,2 533,4 50,8 685,8
20” 20,0 33,75 4,25 9,75 20,0 24,50 23,00 20 2,12 29,50 362
508 857,3 108 247,7 508 622,3 584,2 53,8 749,3
24” 24,0 41,00 5,50 11,50 24,0 29,50 27,25 20 2,62 35,50 665
609,6 1041,4 139,7 292,1 609,6 749,3 692,2 66,5 901 ,7
DIMEN-
WELDING NECK FLANGES 41 SIONS
WELDING
NECK
WELDING NECk FLANGES 900
1500
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1,05 5,12 1,00 2,75 1,05 1,75 1,69 4 0,88 3,50 2,56
26,7 130,0 25,4 69,9 26,7 44, 5 42,9 22,4 88,9
1” 1,315 5,88 1,12 2,88 1,315 2,06 2,00 4 1,00 4,00 3,74
33,4 149,4 28,4 73,2 33,4 52,3 50,8 25,4 101,6
11/4” 1,66 6,25 1,12 2,88 1,66 2,50 2,50 4 1,00 4,38 4,33
42,2 158,8 28,4 73,2 42,2 63,5 63,5 25,4 111,3
11/2” 1,90 7,00 1,25 3,25 1,90 2,75 2,88 4 1,12 4,88 5,94
48,3 177,8 31,8 82,6 48,3 69,9 73,2 28,4 124
2” 2,375 8,50 1,50 4,00 2,375 4,12 3,62 8 1,00 6,50 10,8
60,3 215,9 38,1 101,6 60,3 104,6 91,9 25,4 165,1
21/2“ 2,875 9,62 1,62 4,12 2,875 4,88 4,12 8 1,12 7,50 15,0
73,0 244,3 41,1 104,6 73,0 124 104,6 28,4 190,5
3” 3,50 10,50 1,88 4,62 3,50 5,25 5,00 8 1,25 8,00 19,9
88,9 266,7 47,8 117,3 88,9 133,4 127,0 31,8 203,2
To be specified by the purchaser
4” 4,50 12,25 2,12 4,88 4,50 6,38 6,19 8 1,38 9,50 29,9
114,3 311,2 53,8 124 114,3 162,1 157,2 35,1 241,3
5” 5,563 14,75 2,88 6,12 5,563 7,75 7,31 8 1,62 11,50 55,4
141,3 374,7 73,2 155,4 141,3 196,9 185,7 41,1 292,1
6” 6,625 15,50 3,25 6,75 6,625 9,00 8,50 12 1,50 12,50 68,4
168,3 393,7 82,6 171,5 168,3 228,6 215,9 38,1 317,5
8” 8,625 19,00 3,62 8,38 8,625 11,50 10,62 12 1,75 15,50 117
219,1 482,6 91,9 212,9 219,1 292,1 269,7 44,5 393,7
10” 10,75 23,00 4,25 10,00 10,75 14,50 12,75 12 2,00 19,00 194
273 584,2 108,0 254,0 273 368,3 323,9 50,8 482,6
12” 12,75 26,50 4,88 11,12 12,75 17,75 15,00 16 2,12 22,50 288
323,8 673,1 124 282,4 323,8 450,9 381,0 53,8 571,5
14” 14,0 29,50 5,25 11,75 14,0 19,50 16,25 16 2,38 25,00 380
355,6 749,3 133,4 298,5 355,6 495,3 412,8 60,5 635,0
16” 16,0 32,50 5,75 12,25 16,0 21,75 18,50 16 2,62 27,75 485
406,4 825,5 146,1 311,2 406,4 552,5 469,9 66,5 704,9
18” 18,0 36,00 6,38 12,88 18,0 23,50 21,00 16 2,88 30,50 644
457,2 914,4 162,1 327,2 457,2 596,9 533,4 73,2 774,7
20” 20,0 38,75 7,00 14,00 20,0 25,25 23,00 16 3,12 32,75 775
508 984,3 177,8 355,6 508 641,4 584,2 79,2 831,9
24” 24,0 46,00 8,00 16,00 24,0 30,00 27,25 16 3,62 39,00 1232
609,6 1168,4 203,2 406,4 609,6 762,0 692,2 91,9 990,6
42 DIMENSIONS WELDING NECK FLANGES
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
3/4” 1,05 5,50 1,25 3,12 1,05 2,00 1,69 4 0,88 3,75 3,70
26,7 139,7 31,8 79,2 26,7 50,8 42,9 22,4 95,3
1” 1,315 6,25 1,38 3,50 1,315 2,25 2,00 4 1,00 4,25 5,24
33,4 158,8 35,1 88,9 33,4 57,2 50,8 25,4 108,0
11/4” 1,66 7,25 1,50 3,75 1,66 2,88 2,50 4 1,12 5,12 7,74
42,2 184,2 38,1 95,3 42,2 73,2 63,5 28,4 130,0
11/2” 1,90 8,00 1,75 4,38 1,90 3,12 2,88 4 1,25 5,75 10,9
48,3 203,2 44,5 111,3 48,3 79,2 73,2 31,8 146,1
2” 2,375 9,25 2,00 5,00 2,375 3,75 3,62 8 1,12 6,75 16,2
To be specified by the purchaser
21/2“ 2,875 10,50 2,25 5,62 2,875 4,50 4,12 8 1,25 7,75 23,7
73,0 266,7 57,2 142,7 73,0 114,3 104,6 31,8 196,9
3” 3,50 12,00 2,62 6,62 3,50 5,25 5,00 8 1,38 9,00 36,2
88,9 304,8 66,5 168,1 88,9 133,4 127,0 35,1 228,6
4” 4,50 14,00 3,00 7,50 4,50 6,50 6,19 8 1,62 10,75 55,3
114,3 355,6 76,2 190,5 114,3 165,1 157,2 41,1 273,1
5” 5,563 16,50 3,62 9,00 5,563 8,00 7,31 8 1,88 12,75 92,5
141,3 419,1 91,9 228,6 141,3 203,2 185,7 47,8 323,9
6” 6,625 19,00 4,25 10,75 6,625 9,25 8,50 8 2,12 14,50 143
168,3 482,6 108,0 273,1 168,3 235,0 215,9 53,8 368,3
8” 8,625 21,75 5,00 12,50 8,625 12,00 10,62 12 2,12 17,25 215
219,1 552,5 127,0 317,5 219,1 304,8 269,7 53,8 438,2
10” 10,75 26,50 6,50 16,50 10,75 14,75 12,75 12 2,62 21,25 406
273 673,1 165,1 419,1 273 374,7 323,9 66,5 539,8
12” 12,75 30,00 7,25 18,25 12,75 17,38 15,00 12 2,88 24,38 572
323,8 762,0 184,2 463,6 323,8 441,5 381,0 73,2 619,3
DIMEN-
WELDING NECK FLANGES 43 SIONS
ASME
B 16.5
WELDING
NECK
2500
ASME B 16.5
44
Ulmz
45
ASME B 16.5
Pipe Flange Hub rai- drilling Template Approx
sed Weight
Face
3/4” 1 ,05 3,88 1,09 0,44 0,56 1 ,50 1 ,69 4 0,62 2,75 0,56
26,7 98,6 27,7 11,1 14,1 38,1 42,9 15.7 69,9
1” 1 ,315 4,25 1 ,36 0,5 0,63 1 ,94 2,00 4 0,62 3,12 0,78
33,4 108,0 34,5 12,6 15,9 49,3 50,8 15.7 79,2
11/4” 1 ,66 4,62 1 ,70 0,56 0,75 2,31 2,50 4 0,62 3,50 1,03
42,2 117,3 43,2 14,1 19 58,7 63,5 15,7 88,9
11/2” 1,90 5,00 1,95 0,63 0,82 2,56 2,88 4 0,62 3,88 1,32
48,3 127,0 49,5 15,9 20,8 65,0 73,2 15,7 98,6
2” 2,375 6,00 2,44 0,69 0,94 3,06 3,62 4 0,75 4,75 2,06
60,3 152,4 62,0 17,5 23,8 77,7 91,9 19,1 120,7
21/2” 2,875 7,00 2,94 0,82 1,06 3,56 4,12 4 0,75 5,50 3,28
73,0 177,8 74,7 20,8 26,8 90,4 104,6 19,1 139,7
3” 3,50 7,50 3,57 0,88 1,13 4,25 5,00 4 0,75 6,00 3,85
88,9 190,5 90,7 22,3 28,6 108,0 127,0 19,1 152,4
31/2” 4,00 8,50 4,07 0,88 1,19 4,81 5,50 8 0,75 7,00 4,81
101,6 215,9 103,4 22,3 30,2 122,2 139,7 19,1 177,8
4” 4,50 9,00 4,57 0,88 1,25 5,31 6,19 8 0,75 7,50 5,30
114,3 228,6 116,1 22,3 31,7 134,9 157,2 19,1 190,5
5” 5,563 10,00 5,66 0,88 1,38 6,44 7,31 8 0,88 8,50 6,07
141,3 254,0 143,8 22,3 35 163,6 185,7 22,4 215,9
6” 6,625 11,00 6,72 0,94 1,5 7,56 8,50 8 0,88 9,50 7,45
168,3 279,4 170,7 23,8 38 192,0 215,9 22,4 241,3
8” 8,625 13,50 8,72 1,06 1,69 9,69 10,62 8 0,88 11,75 12,1
219,1 342,9 221,5 26,8 42,9 246,1 269,7 22,4 298,5
10” 10,75 16,00 10,88 1,13 1,88 12,00 12,75 12 1,00 14,25 16,5
273 406,4 276,4 28,6 47,7 304,8 323,9 25,4 362,0
12” 12,75 19,00 12,88 1,19 2,13 14,38 15,00 12 1,00 17,00 26,2
323,8 482,6 327,2 30,2 54 365,3 381,0 25,4 431,8
14” 14,0 21,00 14,14 1,32 2,19 15,75 16,25 12 1,12 18,75 34,6
355,6 533,4 359,2 33,5 55,6 400,1 412,8 28,4 476,3
16” 16,0 23,50 16,16 1,38 2,44 18,00 18,50 16 1,12 21,25 44,8
406,4 596,9 410,5 35 61,9 457,2 469,9 28,4 539,8
18” 18,0 25,00 18,18 1,5 2,63 19,88 21,00 16 1,25 22.75 48,9
457,2 635,0 461,8 38 66,7 505,0 533,4 31,8 577,9
20” 20,0 27,50 20,20 1,63 2,82 22,00 23,00 20 1,25 25,00 61,9
508 698,5 513,1 41,3 71,6 558,8 584,2 31,8 635,0
24” 24,0 32,00 24,25 1,82 3,19 26,12 27,25 20 1,38 29,50 86,9
609,6 812,8 616,0 46,2 81 663,4 692,2 35,1 749,3
SLIP ON FLANGES 47
ASME
B 16.5
SLIP-ON
3/4” 1,05 4,62 1,09 0,56 0,94 1,88 1,69 4 0,75 3,25 1,12
26,7 117,3 27,7 14,1 23,8 47,8 42,9 19,1 82,6
11/4” 1,66 5,25 1,70 0,69 1 2,50 2,50 4 0,75 3,88 1,68
42,2 133,4 43,2 17,5 25,3 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,95 0,75 1,13 2,75 2,88 4 0,88 4,50 2,49
48,3 155,4 49,5 19 28,6 69,9 73,2 22,4 114,3
2” 2,375 6,50 2,44 0,82 1,25 3,31 3,62 8 0,75 5,00 2,87
60,3 165,1 62,0 20,8 31,7 84,1 91,9 19,1 127,0
21/2” 2,875 7,50 2,94 0,94 1,44 3,94 4,12 8 0,88 5,88 4,32
73,0 190,5 74,7 23,8 36,5 100,1 104,6 22,4 149,4
3” 3,50 8,25 3,57 1,06 1,63 4,62 5,00 8 0,88 6,62 5,85
88,9 209,6 90,7 26,8 41,3 117,3 127,0 22,4 168,1
31/2” 4,00 9,00 4,07 1,13 1,69 5,25 5,50 8 0,88 7,25 7,34
101,6 228,6 103,4 28,6 42,9 133,4 139,7 22,4 184,2
4“ 4,50 10,00 4,57 1,19 1,82 5,75 6,19 8 0,88 7,88 9,61
114,3 254,0 116,1 30,2 46,2 146,1 157,2 22,4 200,2
5“ 5,563 11,00 5,66 1,32 1,94 7,00 7,31 8 0,88 9,25 12,3
141,3 279,4 143,8 33,5 49,2 177,8 185,7 22,4 235
8” 8,625 15,00 8,72 1,56 2,38 10,25 10,62 12 1,00 13,00 24,2
219,1 381,0 221,5 39,5 60,4 260,4 269,7 25,4 330,2
10 “ 10,75 17,50 10,88 1,82 2,56 12,62 12,75 16 1,12 15,25 34,1
273 444,5 276,4 46,2 64,9 320,5 323,9 28,4 387,4
12 “ 12,75 20,50 12,88 1,94 2,82 14,75 15,00 16 1,25 17,75 49,8
323,8 520,7 327,2 49,2 71,6 374,7 381,0 31,8 450,9
14 “ 14,0 23,00 14,14 2,06 2,94 16,75 16,25 20 1,25 20,25 69,9
355,6 584,2 359,2 52,2 74,6 425,5 412,8 31,8 514,4
16 “ 16,0 25,50 16,16 2,19 3,19 19,00 18,50 20 1,38 22,50 88,1
406,4 647,7 410,5 55,6 81 482,6 469,9 35,1 571,5
18 “ 18,0 28,00 18,18 2,32 3,44 21,00 21,00 24 1,38 24,75 109
457,2 711,2 461,8 58,9 87,3 533,4 533,4 35,1 628,7
20 “ 20,0 30,50 20,20 2,44 3,69 23,12 23,00 24 1,38 27,00 134
508 774,7 513,1 61,9 93,7 587,2 584,2 35,1 685,8
24 “ 24,0 36,00 24,25 2,69 4,13 27,62 27,25 24 1,62 32,00 201
609,6 914,4 616,0 68,3 104,8 701,5 692,2 41,1 812,8
48 DIMENSIONS SLIP ON FLANGES
ASME B 16.5
Pipe Flange Hub rai- drilling Template Approx.
sed Weight
Face
3/4” 1,05
26,7
1” 1,315
33,4
11/4” 1,66
42,2
2” 2,375
60,3
21/2” 2,875
73,0
3” 3,50
88,9
31/2” 4,00
101.6
4” 4,50 10,00 4,57 1,38 2,00 5,75 6,19 8 1,00 7,88 11,1
114,3 254,0 116,1 35,1 50,8 146,1 157,2 25,4 200,2
5” 5,563 11,00 5,66 1,50 2,12 7,00 7,31 8 1,00 9,25 13,9
141,3 279,4 143,8 38,1 53,8 177,8 185,7 25,4 235,0
6” 6,625 12,50 6,72 1,62 2,25 8,12 8,50 12 1,00 10,62 18,3
168,3 317,5 170,7 41,1 57,2 206,2 215,9 25,4 269,7
8” 8,625 15,00 8,72 1,88 2,69 10,25 10,62 12 1,12 13,00 28,6
219,1 381,0 221,5 47,8 68,3 260,4 269,7 28,4 330,2
10” 10,75 17,50 10,88 2,12 2,88 12,62 12,75 16 1,25 15,25 39,2
273 444,5 276,4 53,8 73,2 320,5 323,9 31,8 387,4
12 “ 12,75 20,50 12,88 2,25 3,12 14,75 15,00 16 1,38 17,75 57,0
323,8 520,7 327,2 57,2 79,2 374,7 381,0 35,1 450,9
14 “ 14,0 23,00 14,14 2,38 3,31 16,75 16,25 20 1,38 20,25 79,1
355,6 584,2 359,2 60,5 84,1 425,5 412,8 35,1 514,4
16 “ 16,0 25,50 16,16 2,50 3,69 19,00 18,50 20 1,50 22,50 101
406,4 647,7 410,5 63,5 93,7 482,6 469,9 38,1 571,5
18 “ 18,0 28,00 18,18 2,62 3,88 21,00 21,00 24 1,50 24,75 123
457,2 711,2 461,8 66,5 98,6 533,4 533,4 38,1 628,7
20 “ 20,0 30,50 20,20 2,75 4,00 23,12 23,00 24 1,62 27,00 146
508 774,7 513,1 69,9 101,6 587,2 584,2 41,1 685,8
24 “ 24,0 36,00 24,25 3,00 4,50 27,62 27,25 24 1,88 32,00 219
609,6 914,4 616,0 76,2 114,3 701,5 692,2 47,8 812,8
SLIP ON FLANGES 49
ASME
B 16.5
SLIP-ON
3/4” 1,05 4,62 1,09 0,62 1 ,00 1 ,88 1,69 4 0,75 3,25 1 ,27
26,7 117,3 27,7 15,7 25,4 47,8 42,9 19,1 82,6
1” 1 ,315 4,88 1 ,36 0,69 1,06 2,12 2,00 4 0,75 3,50 1,52
33,4 124,0 34,5 17.5 26,9 53,8 50,8 19,1 88,9
11/4” 1,66 5,25 1,70 0,81 1,12 2,50 2,50 4 0,75 3,88 2,03
42,2 133,4 43,2 20,6 28,4 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,95 0,88 1,25 2,75 2,88 4 0,88 4,50 2,96
48,3 155,4 49,5 22,4 31,8 69,9 73,2 22,4 114,3
2” 2,375 6,50 2,44 1,00 1,44 3,31 3,62 8 0,75 5,00 3,62
60,3 165,1 62,0 25,4 36,6 84,1 91,9 19,1 127,0
21/2” 2,875 7,50 2,94 1,12 1,62 3,94 4,12 8 0,88 5,88 5,28
73,0 190,5 74,7 28,4 41,1 100,1 104,6 22,4 149,4
3” 3,50 8,25 3,57 1,25 1,81 4,62 5,00 8 0,88 6,62 7,00
88,9 209,6 90,7 31,8 46,0 117,3 127,0 22,4 168,1
31/2” 4,00 9,00 4,07 1,38 1,94 5,25 5,50 8 1,00 7,25 8,84
101,6 228,6 103,4 35,1 49,3 133,4 139,7 25,4 184,2
4“ 4,50 10,75 4,57 1,50 2,12 6,00 6,19 8 1,00 8,50 14,5
114,3 273,1 116,1 38,1 53,8 152,4 157,2 25,4 215,9
5“ 5,563 13,00 5,66 1,75 2,38 7,44 7,31 8 1,12 10,50 24,4
141,3 330,2 143,8 44,5 60,5 189,0 185,7 28,4 266,7
6“ 6,625 14,00 6,72 1,88 2,62 8,75 8,50 12 1,12 11,50 28,7
168,3 355,6 170,7 47,8 66,5 222,3 215,9 28,4 292,1
8“ 8,625 16,50 8,72 2,19 3,00 10,75 10,62 12 1,25 13,75 43,4
219,1 419,1 221,5 55,6 76,2 273,1 269,7 31,8 349,3
10 “ 10,75 20,00 10,88 2,50 3,38 13,50 12,75 16 1,38 17,00 70,3
273 508,0 276,4 63,5 85,9 342,9 323,9 35,1 431,8
12 “ 12,75 22,00 12,88 2,62 3,62 15,75 15,00 20 1,38 19,25 84,2
323,8 558,8 327,2 66,5 91,9 400,1 381,0 35,1 489,0
14 “ 14,0 23,75 14,14 2,75 3,69 17,00 16,25 20 1,50 20,75 98,7
355,6 603,3 359,2 69,9 93,7 431,8 412,8 38,1 527,1
16 “ 16,0 27,00 16,16 3,00 4,19 19,50 18,50 20 1,62 23,75 142
406,4 685,8 410,5 76,2 106,4 495,3 469,9 41,1 603,3
18 “ 18,0 29,25 18,18 3,25 4,62 21,50 21,00 20 1,75 25,75 173
457,2 743,0 461,8 82,6 117,3 546,1 533,4 44,5 654,1
20 “ 20,0 32,00 20,20 3,50 5,00 24,00 23,00 24 1,75 28,50 220
508 812,8 513,1 88,9 127,0 609,6 584,2 44,5 723,9
24 “ 24,0 37,00 24,25 4,00 5,50 28,25 27,25 24 2,00 33,00 312
609,6 939,8 616,0 101,6 139,7 717,6 692,2 50,8 838,2
50 DIMENSIONS SLIP ON FLANGES
ASME B 16.5
Pipe Flange Hub rai- drilling Template Approx.
sed Weight
Face
3/4” 1,05
26,7
1” 1,315
33,4
11/2” 1,90
48,3
2” 2,375
60,3
21/2” 2,875
73,0
3“ 3,50 9,50 3,57 1,50 2,12 5,00 5,00 8 1,00 7,50 11,6
88,9 241,3 90,7 38,1 53,8 127,0 127,0 25,4 190,5
4“ 4,00 11,50 4,57 1,75 2,75 6,25 6,19 8 1,25 9,25 19,7
101,6 292,1 116,1 44,4 69,9 158,8 157,2 31,8 235
5“ 5,563 13,75 5,66 2,00 3,12 7,50 7,31 8 1,38 11,00 31,9
141,3 349,3 143,8 50,8 79,2 190,5 185,7 35,1 279.4
6“ 6,625 15,00 6,72 2,19 3,38 9,25 8,50 12 1,25 12,50 41,1
168,3 381,0 170,7 55,6 85,9 235 215,9 31,8 317,5
8“ 8,625 18,50 8,72 2,50 4,00 11,75 10,62 12 1,50 15,50 70,7
219,1 469,9 221,5 63,5 101,6 298,5 269,8 38,1 393,7
10 “ 10,75 21,50 10,88 2,75 4,25 14,50 12,75 16 1,50 18,50 101
273 546,1 276,4 69,9 107,9 368,3 323,8 38,1 469,9
12 “ 12,75 24,00 12,88 3,12 4,62 16,50 15,00 20 1,50 21,00 133
323,8 609,6 327,2 79,2 117,3 419,1 381,0 38,1 533,4
14 “ 14,0 25,25 14,14 3,38 5,12 17,75 16,25 20 1,62 22,00 153
355,6 641.4 359,2 85,9 130,0 450,9 412,8 41,1 558,8
16 “ 16,0 27,75 16,16 3,50 5,25 20,00 18,50 20 1,75 24,25 185
406.4 704,9 410,5 88,9 133,4 508,0 469,9 44,5 616
18 “ 18,0 31,00 18,18 4,00 6,00 22,25 21,00 20 2,00 27,00 258
457,2 787,4 461,8 101,6 152.4 565,2 533.4 50,8 685,8
20 “ 20,0 33,75 20,20 4,25 6,25 24,50 23,00 20 2,12 29,50 317
508 857,3 513,1 108,0 158,8 622,3 584,2 53,8 749,3
24 “ 24,0 41,00 24,25 5,50 8,00 29,50 27,25 20 2,62 35,50 606
609,6 1041,4 616 139,7 203,2 749,3 692,2 66,5 901,7
SLIP ON FLANGES 51
ASME
B 16.5
SLIP-ON
3/4” 1,05 5,12 1,09 1,00 1,38 1,75 1,69 4 0,88 3,50 2,34
26,7 130,0 27,7 25,4 35,1 44,5 42,9 22,4 88,9
1” 1,315 5,88 1,36 1,12 1,62 2,06 2,00 4 1,00 4,00 3,44
33,4 149,4 34,5 28,4 41,1 52,3 50,8 25,4 101,6
11/4” 1,66 6,25 1,70 1,12 1,62 2,50 2,50 4 1,00 4,38 3,91
42,2 158,7 43,2 28,4 41,1 63,5 63,5 25,4 111,3
11/2” 1,90 7,00 1,95 1,25 1,75 2,75 2,88 4 1,12 4,88 5,36
48,3 177,8 49,5 31,8 44,5 69,9 73,2 28,4 124
2” 2,375 8,50 2,44 1,50 2,25 4,12 3,62 8 1,00 6,50 9,85
60,3 215,9 62,0 38,1 57,2 104,6 91,9 25,4 165,1
21/2” 2,875 9,62 2,94 1,62 2,50 4,88 4,12 8 1,12 7,50 13,7
73,0 244,3 74,7 41,1 63,5 124 104,6 28,4 190,5
52
Ulmz
53
ASME B 16.5
Pipe Flange Hub drilling Template Approx.
Weight
3/4” 1,05 3,88 1,11 0,50 0,62 0,12 1,50 4 0,62 2,75 0,55
26,7 98,6 28,2 12,7 15,7 3,0 38,1 15,7 69,9
1” 1,315 4,25 1,38 0,56 0,69 0,12 1,94 4 0,62 3,12 0,76
33,4 108,0 35,1 14,2 17,5 3,0 49,3 15,7 79,2
11/4” 1,66 4,62 1,72 0,62 0,81 0,19 2,31 4 0,62 3,50 1,01
42,2 117,3 43,7 15,7 20,6 4,8 58,7 15,7 88,9
11/2” 1,90 5,00 1,97 0,69 0,88 0,25 2,56 4 0,62 3,88 1,30
48,3 127,0 50,0 17,5 22,4 6,4 65,0 15,7 98,6
2” 2,375 6,00 2,46 0,75 1,00 0,31 3,06 4 0,75 4,75 2,03
60,3 152,4 62,5 19,1 25,4 7,9 77,7 19,1 120,7
21/2” 2,875 7,00 2,97 0,88 1,12 0,31 3,56 4 0,75 5,50 3,25
73,0 177,8 75,4 22,4 28,4 7,9 90,4 19,1 139,7
3” 3,50 7,50 3,60 0,94 1,19 0,38 4,25 4 0,75 6,00 3,81
88,9 190,5 91,4 23,9 30,2 9,7 108,0 19,1 1 52,4
31/2” 4,00 8,50 4,10 0,94 1,25 0,38 4,81 8 0,75 7,00 4,76
101,6 215,9 104,1 23,9 31,8 9,7 122,2 19,1 177,8
4“ 4,50 9,00 4,60 0,94 1,31 0,44 5,31 8 0,75 7,50 5,25
114,3 228,6 116,8 23,9 33,3 11,2 134,9 19,1 190,5
5“ 5,563 10,00 5,69 0,94 1,44 0,44 6,44 8 0,88 8,50 6,02
141,3 254,0 144,5 23,9 36,6 11,2 163,6 22,4 215,9
6“ 6,625 11,00 6,75 1,00 1,56 0,50 7,56 8 0,88 9,50 7,40
168,3 279,4 171,5 25,4 39,6 12,7 192,0 22,4 241,3
8“ 8,625 13,50 8,75 1,12 1,75 0,50 9,69 8 0,88 11,75 12,1
219,1 342,9 222,3 28,4 44,5 12,7 246,1 22,4 298,5
10 “ 10,75 16,00 10,92 1,19 1,94 0,50 12,00 12 1,00 14,25 16,4
273 406,4 277,4 30,2 49,3 12,7 304,8 25,4 362,0
12 “ 12,75 19,00 12,92 1,25 2,19 0,50 14,38 12 1,00 17,00 26,1
323,8 482,6 328,2 31,8 55,6 12,7 365,3 25,4 431,8
14 “ 14,0 21,00 14,18 1,38 3,12 0,50 15,75 12 1,12 18,75 34,5
355,6 533,4 360,2 35,1 79,2 12,7 400,1 28,4 476,3
16 “ 16,0 23,50 16,19 1,44 3,44 0,50 18,00 16 1,12 21,25 44,6
406,4 596,9 411,2 36,6 87,4 12,7 457,2 28,4 539,8
18 “ 18,0 25,00 18,20 1,56 3,81 0,50 19,88 16 1,25 22,75 48,7
457,2 635,0 462,3 39,6 96,8 12,7 505,0 31,8 577,9
20 “ 20,0 27,50 20,25 1,69 4,06 0,50 22,00 20 1,25 25,00 61,6
508 698,5 514,4 42,9 103,1 12,7 558,8 31,8 635,0
24 “ 24,0 32,00 24,25 1,88 4,38 0,50 26,12 20 1,38 29,50 86,6
609,6 812,8 616,0 47,8 111,3 12,7 663,4 35,1 749,3
LAP JOINT FLANGES 55
ASME B 16.5
Pipe Flange Hub drilling Template Approx.
ASME
Weight B 16.5
LAP
JOINT
FLANGES
Nom. Od d J b h r m Num- I k kilo
size in. in. in. in. in. in. in. ber in. in. 150
dN mm mm mm mm mm mm mm mm mm 300
1/2” 0,84 3,75 0,90 0,56 0,88 0,12 1,50 4 0,62 2,62 0,62
21,3 95,3 22,9 14,2 22.4 3,0 38,1 15,7 66,6
3/4” 1,05 4,62 1,11 0,62 1,00 0,12 1,88 4 0,75 3,25 1,10
26,7 117,3 28,2 15,7 25.4 3,0 47,8 19,1 82,6
1” 1,315 4,88 1,38 0,69 1,06 0,12 2,12 4 0,75 3,50 1,33
33,4 124 35,1 17,5 26,9 3,0 53,8 19,1 88,9
11/4” 1,66 5,25 1,72 0,75 1,06 0,19 2,50 4 0,75 3,88 1,65
42,2 133,4 43,7 19,1 26,9 4,8 63,5 19,1 98,6
11/2” 1,90 6,12 1,97 0,81 1,19 0,25 2,75 4 0,88 4,50 2,44
48,3 155,4 50,0 20,6 30,2 6.4 69,9 22,4 114,3
2” 2,375 6,50 2,46 0,88 1,31 0,31 3,31 8 0,75 5,00 2,83
60,3 165,1 62,5 22,4 33,3 7,9 84,1 19,1 127,0
21/2” 2,875 7,50 2,97 1,00 1,50 0,31 3,94 8 0,88 5,88 4,25
73,0 190,5 75,4 25.4 38,1 7,9 100,1 22,4 149,4
3” 3,50 8,25 3,60 1,12 1,69 0,38 4,62 8 0,88 6,62 5,78
88,9 209,6 91,4 28,4 42,9 9,7 117,3 22,4 168,1
31/2” 4,00 9,00 4,10 1,19 1,75 0,38 5,25 8 0,88 7,25 7,27
101,6 228,6 104,1 30,2 44,5 9,7 133,4 22,4 184,2
4“ 4,50 10,00 4,60 1,25 1,88 0,44 5,75 8 0,88 7,88 9,55
114,3 254,0 116,8 31,8 47,8 11,2 146,1 22,4 200,2
5“ 5,563 11,00 5,69 1,38 2,00 0,44 7,00 8 0,88 9,25 12,2
141,3 279,4 144,5 35,1 50,8 11,2 177,8 22,4 235
6“ 6,625 12,50 6,75 1.44 2,06 0,50 8,12 12 0,88 10,62 15,5
168,3 317,5 171,5 36,6 52,3 12,7 206,2 22,4 269,7
8“ 8,625 15,00 8,75 1,62 2,44 0,50 10,25 12 1,00 13,00 24,1
219,1 381,0 222,3 41,1 62 12,7 260,4 25,4 330,2
10 “ 10,75 17,50 10,92 1,88 3,75 0,50 12,62 16 1,12 15,25 34.4
273 444,5 277,4 47,8 95,3 12,7 320,5 28,4 387,4
12 “ 12,75 20,50 12,92 2,00 4,00 0,50 14,75 16 1,25 17,75 50,4
323,8 520,7 328,2 50,8 101,6 12,7 374,7 31,8 450,9
14 “ 14,0 23,00 14,18 2,12 4,38 0,50 16,75 20 1,25 20,25 70,9
355,6 584,2 360,2 53,8 111,3 12,7 425,5 31,8 514,3
16 “ 16,0 25,50 16,19 2,25 4,75 0,50 19,00 20 1,38 22,50 89,5
406,4 647,7 411,2 57,2 120,7 12,7 482,6 35,1 571,5
18 “ 18,0 28,00 18,20 2,38 5,12 0,50 21,00 24 1,38 24,75 111
457,2 711,2 462,3 60,5 130,0 12,7 533,4 35,1 628,7
20 “ 20,0 30,50 20,25 2,50 5,50 0,50 23,12 24 1,38 27,00 137
508 774,7 514,4 63,5 139,7 12,7 587,2 35,1 685,8
24 “ 24,0 36,00 24,25 2,75 6,00 0,50 27,62 24 1,62 32,00 204
609,6 914,4 616,0 69,9 152,4 12,7 701,5 41,1 812,8
56 DIMENSIONS LAP JOINT FLANGES
ASME B 16.5
Pipe Flange Hub drilling Template Approx.
Weight
3/4” 1,05
26,7
1” 1,315
33,4
11/4” 1,66
42,2
2” 2,375
60,3
21/2” 2,875
73,0
3” 3,50
88,9
31/2” 4,00
101,6
4“ 4,50 10,00 4,60 1,38 2,00 0,44 5,75 8 1,00 7,88 10,9
114,3 254,0 116,8 35,1 50,8 11,2 146,1 25,4 200,2
5“ 5,563 11,00 5,69 1,50 2,12 0,44 7,00 8 1,00 9,25 13,7
141,3 279,4 144,5 38,1 53,8 11,2 177,8 25,4 235,0
6“ 6,625 12,50 6,75 1,62 2,25 0,50 8,12 12 1,00 10,62 18,0
168,3 317,5 171,5 41,1 57,2 12,7 206,2 25,4 269,7
8“ 8,625 15,00 8,75 1,88 2,69 0,50 10,25 12 1,12 13,00 28,3
219,1 381,0 222,3 47,8 68,3 12,7 260,4 28,4 330,2
10 “ 10,75 17,50 10,92 2,12 4,00 0,50 12,62 16 1,25 15,25 38,8
273 444,5 277,4 53,8 101,6 12,7 320,5 31,8 387,4
12 “ 12,75 20,50 12,92 2,25 4,25 0,50 14,75 16 1,38 17,75 56,6
323,8 520,7 328,2 57,2 108,0 12,7 374,7 35,1 450,9
14 “ 14,0 23,00 14,18 2,38 4,62 0,50 16,75 20 1,38 20,25 78,6
355,6 584,2 360,2 60,5 117,3 12,7 425,5 35,1 514,4
16 “ 16,0 25,50 16,19 2,50 5,00 0,50 19,00 20 1,50 22,50 100
406,4 647,7 411,2 63,5 127,0 12,7 482,6 38,1 571,5
18 “ 18,0 28,00 18,20 2,62 5,38 0,50 21,00 24 1,50 24,75 122
457,2 711,2 462,3 66,5 136,7 12,7 533,4 38,1 628,7
20 “ 20,0 30,50 20,25 2,75 5,75 0,50 23,12 24 1,62 27,00 145
508 774,7 514,4 69,9 146,1 12,7 587,2 41,1 685,8
24 “ 24,0 36,00 24,25 3,00 6,25 0,50 27,62 24 1,88 32,00 217
609,6 914,4 616,0 76,2 158,8 12,7 701,5 47,8 812,8
LAP JOINT FLANGES 57
ASME B 16.5
Pipe Flange Hub drilling Template Approx. ASME
Weight B 16.5
LAP
Nom. Od d J b h r m Num- I k kilo JOINT
FLANGES
size in. in. in. in. in. in. in. ber in. in.
dN mm mm mm mm mm mm mm mm mm 400
600
1/2” 0,84 3,75 0,90 0,56 0,88 0,12 1,50 4 0,62 2,62 0,72
21,3 95,3 22,9 14,2 22,4 3,0 38,1 15,7 66,5
3/4” 1,05 4,62 1,11 0,62 1,00 0,12 1,88 4 0,75 3,25 1,25
26,7 117,3 28,2 15,7 25,4 3,0 47,8 19,1 82,6
1” 1,315 4,88 1,38 0,69 1,06 0,12 2,12 4 0,75 3,50 1,50
33,4 124,0 35,1 17,5 26,9 3,0 53,8 19,1 88,9
11/4” 1,66 5,25 1,72 0,81 1,12 0,19 2,50 4 0,75 3,88 2,00
42,2 133,4 43,7 20,6 28,4 4,8 63,5 19,1 98,6
11/2” 1,90 6,12 1,97 0,88 1,25 0,25 2,75 4 0,88 4,50 2,92
48,3 155,4 50,0 22,4 31,8 6,4 69,9 22,4 114,3
2” 2,375 6,50 2.46 1,00 1.44 0,31 3,31 8 0,75 5,00 3,55
60,3 165,1 62,5 25,4 36,6 7,9 84,1 19,1 127,0
21/2” 2,875 7,50 2,97 1,12 1,62 0,31 3,94 8 0,88 5,88 5,23
73,0 190,5 75,4 28,4 41,1 7,9 100,1 22,4 149,4
3” 3,50 8,25 3,60 1,25 1,81 0,38 4,62 8 0,88 6,62 6,95
88,9 209,6 91,4 31,8 46,0 9,7 117,3 22,4 168,1
31/2” 4,00 9,00 4,10 1,38 1,94 0,38 5,25 8 1,00 7,25 8,78
101,6 228,6 104,1 35,1 49,3 9,7 133,4 25.4 184,2
4“ 4,50 10,75 4,60 1,50 2,12 0,44 6,00 8 1,00 8,50 14,4
114,3 273,1 116,8 38,1 53,8 11,2 152,4 25,4 215,9
5“ 5,563 13,00 5,69 1,75 2,38 0,44 7.44 8 1,12 10,50 24,3
141,3 330,2 144,5 44,5 60,5 11,2 189,0 28.4 266,7
6“ 6,625 14,00 6,75 1,88 2,62 0,50 8,75 12 1,12 11,50 28,5
168,3 355,6 171,5 47,8 66,5 12,7 222,3 28,4 292,1
8“ 8,625 16,50 8,75 2,19 3,00 0,50 10,75 12 1,25 13,75 43,1
219,1 419,1 222,3 55,6 76,2 12,7 273,1 31,8 349,3
10 “ 10,75 20,00 10,92 2,50 4,38 0,50 13,50 16 1,38 17,00 70,5
273 508,0 277,4 63,5 111,3 12,7 342,9 35,1 431,8
12 “ 12,75 22,00 12,92 2,62 4,62 0,50 15,75 20 1,38 19,25 86,1
323,8 558,8 328,2 66,5 117,3 12,7 400,1 35,1 489,0
14 “ 14,0 23,75 14,18 2,75 5,00 0,50 17,00 20 1,50 20,75 100
355,6 603,3 360,2 69,9 127,0 12,7 431,8 38,1 527,1
16 “ 16,0 27,00 16,19 3,00 5,50 0,50 19,50 20 1,62 23,75 145
406,4 685,8 411,2 76,2 139,7 12,7 495,3 41,1 603,3
18 “ 18,0 29,25 18,20 3,25 6,00 0,50 21,50 20 1,75 25,75 177
457,2 743,0 462,3 82,6 152,4 12,7 546,1 44,5 654,1
20 “ 20,0 32,00 20,25 3,50 6,50 0,50 24,00 24 1,75 28,50 225
508 812,8 514.4 88,9 165,1 12,7 609,6 44,5 723,9
24 “ 24,0 37,00 24,25 4,00 7,25 0,50 28,25 24 2,00 33,00 318
609,6 939,8 616,0 101,6 184,2 12,7 717,6 50,8 838,2
58 DIMENSIONS LAP JOINT FLANGES
ASME B 16.5
Pipe Flange Hub drilling Template Approx.
Weight
3/4” 1,05
26,7
1” 1,315
33,4
11/2” 1,90
48,3
2” 2,375
60,3
21/2” 2,875
73,0
3“ 3,50 9,50 3,60 1,50 2,12 0,38 5,00 8 1,00 7,50 11,3
88,9 241,3 91,4 38,1 53,8 9,7 127,0 25,4 190,5
4“ 4,50 11,50 4,60 1,75 2,75 0,44 6,25 8 1,25 9,25 19,2
114,3 292,1 116,8 44,5 69,9 11,2 158,8 31,8 235
5“ 5,563 13,75 5,69 2,00 3,12 0,44 7,50 8 1,38 11,00 31,2
141,3 349,3 144,5 50,8 79,2 11,2 190,5 35,1 279,4
6“ 6,625 15,00 6,75 2,19 3,38 0,50 9,25 12 1,25 12,50 40,5
168,3 381,0 171,5 55,6 85,9 12,7 235 31,8 317,5
8“ 8,625 18,50 8,75 2,50 4,50 0,50 11,75 12 1,50 15,50 71,5
219,1 469,9 222,2 63,5 114,3 12,7 298,5 38,1 393,7
10 “ 10,75 21,50 10,92 2,75 5,00 0,50 14,50 16 1,50 18,50 104
273 546,1 277,4 69,9 127,0 12,7 368,3 38,1 469,9
12 “ 12,75 24,00 12,92 3,12 5,62 0,50 16,50 20 1,50 21,00 139
323,8 609,6 328,2 79,2 142,7 12,7 419,1 38,1 533,4
14 “ 14,0 25,25 14,18 3,38 6,12 0,50 17,75 20 1,62 22,00 161
355,6 641,3 360,2 85,9 155,4 12,7 450,9 41,1 558,8
16 “ 16,0 27,75 16,19 3,50 6,50 0,50 20,00 20 1,75 24,25 194
406,4 704,9 411,2 88,9 165,1 12,7 508,0 44,5 616
18 “ 18,0 31,00 18,20 4,00 7,50 0,50 22,25 20 2,00 27,00 267
457,2 787,4 462,3 101,6 190,5 12,7 565,2 50,8 685,8
20 “ 20,0 33,75 20,25 4,25 8,25 0,50 24,50 20 2,12 29,50 334
508 857,3 514,4 10B 209,6 12,7 622,3 53,8 749,3
24 “ 24,0 41,00 24,25 5,50 10,50 0,50 29,50 20 2,62 35,50 618
609,6 1041,4 616 139,7 266,7 12,7 749,3 66,5 901,7
LAP JOINT FLANGES 59
ASME B 16.5
Pipe Flange Hub drilling Template Approx. ASME
Weight B 16.5
LAP
JOINT
FLANGES
Nom. Od d J b h r m Num- r k kilo
size in. in. in. in. in. in. in. ber in. in. 900
dN mm mm mm mm mm mm mm mm mm 1500
1/2” 0,84 4,75 0,90 0,88 1,25 0,12 1,50 4 0,88 3,25 1,71
21,3 120,7 22,9 22,4 31,8 3,0 38,1 22,4 82,6
3/4” 1,05 5,12 1,11 1,00 1,38 0,12 1,75 4 0,88 3,50 2,30
26,7 130,0 28,2 25,4 35,1 3,0 44,5 22,4 88,9
1” 1,315 5,88 1,38 1,12 1,62 0,12 2,06 4 1,00 4,00 3,40
33,4 149,4 35,1 28,4 41,1 3,0 52,3 25,4 101,6
11/4” 1,66 6,25 1,72 1,12 1,62 0,19 2,50 4 1,00 4,38 3,85
42,2 158,8 43,7 28.4 41,1 4,8 63,5 25,4 111,3
11/2” 1,90 7,00 1,97 1,25 1,75 0,25 2,75 4 1,12 4,88 5,28
48,3 177,8 50,0 31,8 44,5 6,4 69,9 28.4 124
2” 2,375 8,50 2,46 1,50 2,25 0,31 4,12 8 1,00 6,50 9,78
60,3 215,9 62,5 38,1 57,2 7,9 104,6 25,4 165,1
21/2” 2,875 9,62 2,97 1,62 2,50 0,31 4,88 8 1,12 7,50 13,6
73,0 244,3 75,4 41,1 63,5 7,9 124 28,4 190,5
3“ 3,50 10,50 3,60 1,88 2,88 0,38 5,25 8 1,25 8,00 17,8
88,9 266,7 91,4 47,8 73,2 9,7 133,4 31,8 203,2
4“ 4,50 12,25 4,60 2,12 3,56 0,44 6,38 8 1,38 9,50 27,5
114,3 311,2 116,8 53,8 90,4 11,2 162,1 35,1 241,3
5“ 5,563 14,75 5,69 2,88 4,12 0,44 7,75 8 1,62 11,50 51,5
141,3 374,7 144,5 73,2 104,6 11,2 196,9 41,1 292,1
6“ 6,625 15,50 6,75 3,25 4,69 0,50 9,00 12 1,50 12,50 62,0
168,3 393,7 171,5 82,6 119,1 12,7 228,6 38,1 317,5
8“ 8,625 19,00 8,75 3,62 5,62 0,50 11,50 12 1,75 15,50 105
219,1 482,6 222,3 91,9 142,7 12,7 292,1 44,5 393,7
10 “ 10,75 23,00 10,92 4,25 7,00 0,50 14,50 12 2,00 19,00 179
273 584,2 277,4 108 177,8 12,7 368,3 50,8 482,6
12 “ 12,75 26,50 12,92 4,88 8,62 0,50 17,75 16 2,12 22,50 269
323,8 673,1 328,2 124 218,9 12,7 450,9 53,8 571,5
14 “ 14,0 29,50 14,18 5,25 9,50 0,50 19,50 16 2,38 25,00 365
355,6 749,3 360,2 133,4 241,3 12,7 495,3 60,5 635,0
16 “ 16,0 32,50 16,19 5,75 10,25 0,50 21,75 16 2,62 27,75 459
406,4 825,5 411,2 146,1 260,4 12,7 552,5 66,5 704,9
18 “ 18,0 36,00 18,20 6,38 10,88 0,50 23,50 16 2,88 30,50 598
457,2 914,4 462,3 162,1 276,4 12,7 596,9 73,2 774,7
20 “ 20,0 38,75 20,25 7,00 11,50 0,50 25,25 16 3,12 32,75 712
508 984,3 514,4 177,8 292,1 12,7 641,4 79,2 831,9
24 “ 24,0 46,00 24,25 8,00 13,00 0,50 30,00 16 3,62 39,00 1090
609,6 1168,4 616 203,2 330,2 12,7 762,0 91,9 990,6
60 DIMENSIONS LAP JOINT FLANGES
ASME B 16.5
Pipe Flange Hub drilling Template Approx.
Weight
3/4” 1,05 5,50 1 ,11 1 ,25 1,69 0,12 2,00 4 0,88 3,75 3,40
26,7 139,7 28,2 31,8 42,9 3,0 50,8 22,4 95,3
1” 1,315 6,25 1,38 1,38 1,88 0,12 2,25 4 1,00 4,25 4,77
33,4 158,8 35,1 35,1 47,8 3,0 57,2 25,4 108,0
11/4” 1,66 7,25 1,72 1,50 2,06 0,19 2,88 4 1,12 5,12 7,08
42,2 184,2 43,7 38,1 52,3 4,8 73,2 28,4 130,0
11/2” 1,90 8,00 1,97 1,75 2,38 0,25 3,12 4 1,25 5,75 9,93
48,3 203,2 50,0 44,5 60,5 6,4 79,2 31,8 146,1
2” 2,375 9,25 2,46 2,00 2,75 0,31 3,75 8 1,12 6,75 14,7
60,3 235,0 62,5 50,8 69,9 7,9 95,3 28,4 171,5
21/2” 2,875 10,50 2,97 2,25 3,12 0,31 4,50 8 1,25 7,75 21,3
73,0 266,7 75,4 57,2 79,2 7,9 114,3 31,8 196,9
3“ 3,50 12,00 3,60 2,62 3,62 0,38 5,25 8 1,38 9,00 32,3
88,9 304,8 91,4 66,5 91,9 9,7 133,4 35,1 228,6
4“ 4,50 14,00 4,60 3,00 4,25 0,44 6,50 8 1,62 10,75 52,5
114,3 355,6 116,8 76,2 108,0 11,2 165,1 41,1 273,1
5“ 5,563 16,50 5,69 3,62 5,12 0,44 8,00 8 1,88 12,75 82,6
141,3 419,1 144,5 91,9 130,0 11,2 203,2 47,8 323,9
6“ 6,625 19,00 6,75 4,25 6,00 0,50 9,25 8 2,12 14,50 127
168,3 482,6 171,5 108,0 152,4 12,7 235,0 53,8 368,3
8“ 8,625 21,75 8,75 5,00 7,00 0,50 12,00 12 2,12 17,25 186
219,1 552,5 222,3 127,0 177,8 12,7 304,8 53,8 438,2
10 “ 10,75 26,50 10,92 6,50 9,00 0,50 14,75 12 2,62 21,25 352
273 673,1 277,4 165,1 228,6 12,7 374,7 66,5 539,8
12 “ 12,75 30,00 12,92 7,25 10,00 0,50 17,38 12 2,88 24,38 501
323,8 762,0 328,2 184,2 254,0 12,7 441,5 73,2 619,3
ASME B
16.5
LAP
JOINT
FLANGES
2500
62
Ulmz
63
b
BLIND FLANGES
0,06”=1,6mm
gø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
Dø
lø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
Dø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
3/4” 1,05
26,7
1” 1,315
334
11/4” 1,66
422
2” 2,375
60,3
21/2” 2,875
73,0
3” 3,50
66,9
31/2” 4,00
101,6
Dø
BLIND FLANGES
0,25”=6,4mm
gø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
Dø
BLIND FLANGES
0,25”=6,4mm
gø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
3/4” 1,05
26,7
1” 1,315
33,4
11/4” 1,66
42,2 Use 1500 Ib dimensions for these sizes
11/2” 1,90
48,3
2” 2,375
60,3
21/2” 2,875
73,0
Dø
BLIND FLANGES
0,25”=6,4mm
gø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
Dø
kø
ASME B 16.5
Pipe Flange raised drilling Template Approx.
Face Weight
ASME B 16.5
ASME
B 16.5
BLIND
FLANGES
2500
72
Ulmz
73
kø
mø
h
SOCkET WELDING FLANGES b
cø
0,06”=1,6mm
gø
Dø
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
kø
jø
lø
p
h
b
SOCkET WELDING FLANGES
cø
0,25”=6,4mm
gø
Dø
ASME B 16.5
Pipe Flange Hub raised drilling Template Approx.
Face Weight
1” 1,315 4,88 1,36 0,50 0,69 1,06 2,12 2,00 4 0,75 3,50 1,55
33,4 124,0 34,5 12,7 17,5 26,9 53,8 50,8 19,1 88,9
11/4” 1,66 5,25 1,70 0,56 0,81 1,12 2,50 2,50 4 0,75 3,88 2,06
42,2 133,4 43,2 14,2 20,6 28,4 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,95 0,62 0,88 1,25 2,75 2,88 4 0,88 4,50 3,00 ASME
48,3 155,4 49,5 15,7 22,4 31,8 69,9 73,2 22,4 114,3 B 16.5
2” 2,375 6,50 2,44 0,69 1,00 1,44 3,31 3,62 8 0,75 5,00 3,67 SOCKET
60,3 165,1 62,0 17,5 25,4 36,6 84,1 91,9 19,1 127,0 WELDING
FLANGES
21/2” 2,875 7,50 2,94 0,75 1,12 1,62 3,94 4,12 8 0,88 5,88 5,35
73,0 190,5 74,7 19,1 28,4 41,1 100,1 104,6 22,4 149,4
3“ 3,50 8,25 3,57 0,81 1,25 1,81 4,62 5,00 8 0,88 6,62 7,06
88,9 209,6 90,7 20,6 31,8 46,0 117,3 127,0 22,4 168,1
3/4” 1,05 5,12 1,09 0,44 1,00 1,38 1,75 1,69 4 0,88 3,50 2,41
26,7 130,0 27,7 11,2 25,4 35,1 44,5 42,9 22,4 88,9
1” 1,315 5,88 1,36 0,50 1,12 1,62 2,06 2,00 4 1,00 4,00 3,55
33,4 149,4 34,5 12,7 28,4 41,1 52,3 50,8 25,4 101,6
11/4” 1,66 6,25 1,70 0,56 1,12 1,62 2,50 2,50 4 1,00 4,38 4,02
42,2 158,8 43,2 14,2 28,4 41,1 63,5 63,5 25,4 111,3
11/2” 1,90 7,00 1,95 0,62 1,25 1,75 2,75 2,88 4 1,12 4,88 5,45
48,3 177,8 49,5 15,7 31,8 44,5 69,9 73,2 28,4 124
2” 2,375 8,50 2,44 0,69 1,50 2,25 4,12 3,62 8 1,00 6,50 10,2
60,3 215,9 62,0 17,5 38,1 57,2 104,6 91,9 25,4 165,1
21/2” 2,875 9,62 2,94 0,75 1,62 2,50 4,88 4,12 8 1,12 7,50 13,9
73,0 244,3 74,7 19,1 41,1 63,5 124 104,6 28,4 190,5
76
Ulmz
77
mø
h1 b h
ASME B 16.5 Thread type: Standard taper pipe thread to ANSI B 2.1
3/4” 1,05 3,88 0,44 0,56 1,50 1,69 4 0,62 2,75 0,56
26,7 98,6 11,1 14,1 38,1 42,9 15,7 69,9
11/4” 1,66 4,62 0,56 0,75 2,31 2,50 4 0,62 3,50 1,03
42,2 117,3 14,1 19 58,7 63,5 15,7 88,9
11/2” 1,90 5,00 0,63 0,82 2,56 2,88 4 0,62 3,88 1,32
48,3 127,0 15,9 20,8 65,0 73,2 15,7 98,6
21/2” 2,875 7,00 0,82 1,06 3,56 4,12 4 0,75 5,50 3,28
73,0 177,8 20,8 26,8 90.4 104,6 19,1 139,7
31/2” 4,00 8,50 0,88 1,19 4,81 5,50 8 0,75 7,00 4,81
101,6 215,9 22,3 30,2 122,2 139,7 19,1 177,8
mø
lø
jø
THREADED FLANGES
gø 0,06”=1,6mm
kø
Dø
3/4” 1,05 4,62 1,14 0,56 0,94 0,56 1,88 1,69 4 0,75 3,25
1,12
26,7 117,3 29,0 14,1 23,8 14,1 47,8 42,9 19,1 82,6
11/4” 1,66 5,25 1,75 0,69 1 0,75 2,50 2,50 4 0,75 3,88
1,68
42,2 133,4 44,5 17,5 25,3 19 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,99 0,75 1,13 0,82 2,75 2,88 4 0,88 4,50
2,49
48,3 155,4 50,5 19 28,6 20,8 69,9 73,2 22,4 114,3
2” 2,375 6,50 2,50 0,82 1,25 1,06 3,31 3,62 8 0,75 5,00
2,87
60,3 165,1 63,5 20,8 31,7 26,8 84,1 91,9 19,1 127,0
21/2” 2,875 7,50 3,00 0,94 1,44 1,19 3,94 4,12 8 0,88 5,88 ASME
4,32 B 16.5
73,0 190,5 76,2 23,8 36,5 30,2 100,1 104,6 22,4 149,4
THREA-
DED
3” 3,50 8,25 3,63 1,06 1,63 1,19 4,62 5,00 8 0,88 6,62 FLANGES
5,85
88,9 209,6 92,2 26,8 41,3 30,2 117,3 127,0 22,4 168,1
150
31/2” 4,00 9,00 4,13 1,13 1,69 1,38 5,25 5,50 8 0,88 7,25
7,34 300
101,6 228,6 104,9 28,6 42,9 35 133,4 139,7 22,4 184,2
4“ 4,50 10,00 4,63 1,19 1,82 1,38 5,75 6,19 8 0,88 7,88
9,61
114,3 254,0 117,6 30,2 46,2 35 146,1 157,2 22,4 200,2
5“ 5,563 11,00 5,69 1,32 1,94 1,63 7,00 7,31 8 0,88 9,25
12,3
141,3 279,4 144,5 33,5 49,2 41,3 177,8 185,7 22,4 235
8“ 8,625 15.00 8,75 1,56 2,38 1,94 10,25 10,62 12 1,00 13,00
24,2
219,1 381,0 222,3 39,5 60,4 49,2 260,4 269,7 25.4 330,2
10 “ 10,75 17,50 10,88 1,82 2,56 2,13 12,62 12,75 16 1,12 15,25
34,1
273 444,5 276.4 46,2 64,9 54 320,5 323,8 28,4 387.4
12 “ 12,75 20,50 12,94 1,94 2,82 2,32 14,75 15,00 16 1,25 17,75
49,8
323,8 520,7 328,7 49,2 71,6 58,9 374,7 381,0 31,8 450,9
14 “ 14,0 23,00 14,19 2,06 2,94 2,44 16,75 16,25 20 1,25 20,25
69,9
355,6 584,2 360,4 52,2 74,6 61,9 425,5 412,8 31,8 514.4
16 “ 16,0 25,50 16,19 2,19 3,19 2,63 19,00 18,50 20 1,38 22,50
88,1
406,4 647,7 411,2 55,6 81 66,7 482,6 469,9 35,1 571,5
18 “ 18,0 28,00 18,19 2,32 3,44 2,69 21,00 21,00 24 1,38 24,75
109
457,2 711,2 462 58,9 87,3 68,3 533.4 533,4 35,1 628,7
20 “ 20,0 30,50 20,19 2,44 3,69 2,82 23,12 23,00 24 1,38 27,00
134
508 774,7 512,8 61,9 93,7 71,6 587,2 584,2 35,1 685,8
24 “ 24,0 36,00 24,19 2,69 4,13 3,19 27,62 27,25 24 1,62 32,00
201
609,6 914,4 614,4 68,3 104,8 81 701,5 692,2 41,1 812,8
80 DIMENSIONS THREADED FLANGES
mø
h1 b h
THREADED FLANGES
gø 0,25”=6,4mm
kø
Dø
ASME B 16.5 Thread type: Standard taper pipe thread to ANSI B 2.1
3/4” 1,05
26,7
1” 1,315
33,4
11/4” 1,66
42,2
2” 2,375
60,3
21/2” 2,875
73,0
3” 3,50
88,9
31/2” 4,00
101,6
4“ 4,50 10,00 4,63 1,38 2,00 1,44 5,75 6,19 8 1.00 7,88 11,1
114,3 254,0 117,6 35,1 50,8 36,6 146,1 157,2 25,4 200,2
5“ 5,563 11,00 5,69 1,50 2,12 1,69 7,00 7,31 8 1,00 9,25 13,9
141,3 279,4 144,5 38,1 53,8 42,9 177,8 185,7 25,4 235,0
6“ 6,625 12,50 6,75 1,62 2,25 1,81 8,12 8,50 12 1,00 10,62 18,3
168,3 317,5 171,5 41,1 57,2 46,0 206,2 215,9 25,4 269,7
8“ 8,625 15,00 8,75 1,88 2,69 2,00 10,25 10,62 12 1,12 13,00 28,6
219,1 381,0 222,3 47,8 68,3 50,8 260,4 269,7 28,4 330,2
10 “ 10,75 17,50 10,88 2,12 2,88 2,19 12,62 12,75 16 1,25 15,25 39,2
273 444,5 276,4 53,8 73,2 55,6 320,5 323,8 31,8 387,4
12 “ 12,75 20,50 12,94 2,25 3,12 2,38 14,75 15,00 16 1,38 17,75 57,0
323,8 520,7 328,7 57,2 79,2 60,5 374,7 381,0 35,1 450,9
14 “ 14,0 23,00 14,19 2,38 3,31 2,50 16,75 16,25 20 1,38 20,25 79,1
355,6 584,2 360,4 60,5 84,1 63,5 425,5 412,8 35,1 514,4
16 “ 16,0 25,50 16,19 2,50 3,69 2,69 19,00 18,50 20 1,50 22,50 101
406,4 647,7 411,2 63,5 93,7 68,3 482,6 469,9 38,1 571,5
18 “ 18,0 28,00 18,19 2,62 3,88 2,75 21,00 21,00 24 1,50 24,75 123
457,2 711,2 462,0 66,5 98,6 69,9 533,4 533,4 38,1 628,7
20 “ 20,0 30,50 20,19 2,75 4,00 2,88 23,12 23,00 24 1,62 27,00 146
508 774,7 512,8 69,9 101,6 73,2 587,2 584,2 41,1 685,8
24 “ 24,0 36,00 24,19 3,00 4,50 3,25 27,62 27,25 24 1,88 32,00 219
609,6 914,4 614,4 76,2 114,3 82,6 701,5 692,2 47,8 812,8
THREADED FLANGES 81
mø
lø
jø
600 LB/SQ. IN.
h b h
1
THREADED FLANGES
gø 0,25”=6,4mm
kø
Dø
3/4” 1,05 4,62 1,14 0,62 1,00 0,62 1,88 1,69 4 0,75 3,25 1,27
26,7 117,3 29,0 15,7 25,4 15,7 47,8 42,9 19,1 82,6
1” 1,315 4,88 1,41 0,69 1,06 0,69 2,12 2,00 4 0,75 3,50 1,52
33,4 124,0 35,8 17,5 26,9 17,5 53,8 50,8 19,1 88,9
11/4” 1,66 5,25 1,75 0,81 1,12 0,81 2,50 2,50 4 0,75 3,88 2,03
42,2 133,4 44,5 20,6 28,4 20,6 63,5 63,5 19,1 98,6
11/2” 1,90 6,12 1,99 0,88 1,25 0,88 2,75 2,88 4 0,88 4,50 2,96
48,3 155,4 50,5 22,4 31,8 22,4 69,9 73,2 22.4 114,3
2” 2,375 6,50 2,50 1,00 1.44 1,12 3,31 3,62 8 0,75 5,00 3,62
60,3 165,1 63,5 25,4 36,6 28,4 84,1 91,9 19,1 127,0
ASME
21/2” 2,875 7,50 3,00 1,12 1,62 1,25 3,94 4,12 8 0,88 5,88 5,28 B 16.5
73,0 190,5 76,2 28,4 41,1 31,8 100,1 104,6 22,4 149,4 THREA-
DED
3” 3,50 8,25 3,63 1,25 1,81 1,38 4,62 5,00 8 0,88 6,62 7,00 FLANGES
88,9 209,6 92,2 31,8 46,0 35,1 117,3 127,0 22,4 168,1
400
31/2” 4,00 9,00 4,13 1,38 1,94 1,56 5,25 5,50 8 1,00 7,25 8,84 600
101,6 228,6 104,9 35,1 49,3 39,6 133,4 139,7 25,4 184,2
4“ 4,50 10,75 4,63 1,50 2,12 1,62 6,00 6,19 8 1,00 8,50 14,5
114,3 273,1 117,6 38,1 53,8 41,1 152,4 157,2 25,4 215,9
5” 5,563 13,00 5,69 1,75 2,38 1,88 7,44 7,31 8 1,12 10,50 24,4
141,3 330,2 144,5 44,5 60,5 47,8 189,0 185,7 28,4 266,7
6“ 6,625 14,00 6,75 1,88 2,62 2,00 8,75 8,50 12 1,12 11,50 28,7
168,3 355,6 171,5 47,8 66,5 50,8 222,3 215,9 28,4 292,1
8“ 8,625 16,50 8,75 2,19 3,00 2,25 10,75 10,62 12 1,25 13,75 43,4
219,1 419,1 222,3 55,6 76,2 57,2 273,1 269,7 31,8 349,3
10 “ 10,75 20,00 10,88 2,50 3,38 2,56 13,50 12,75 16 1,38 17,00 70,3
273 508,0 276,4 63,5 85,9 65,0 342,9 323,8 35,1 431,8
12 “ 12,75 22,00 12,94 2,62 3,62 2,75 15,75 15,00 20 1,38 19,25 84,2
323,8 558,8 328,7 66,5 91,9 69,9 400,1 381,0 35,1 489,0
14 “ 14,0 23,75 14,19 2,75 3,69 2,88 17,00 16,25 20 1,50 20,75 98,7
355,6 603,3 360,4 69,9 93,7 73,2 431,8 412,8 38,1 527,1
16 “ 16,0 27,00 16,19 3,00 4,19 3,06 19,50 18,50 20 1,62 23,75 142
406,4 685,8 411,2 76,2 106,4 77,7 495,3 469,9 41,1 603,3
18 “ 18,0 29,25 18,19 3,25 4,62 3,12 21,50 21,00 20 1,75 25,75 173
457,2 743,0 462,0 82,6 117,3 79,2 546,1 533,4 44,5 654,1
20 “ 20,0 32,00 20,19 3,50 5,00 3,25 24,00 23,00 24 1,75 28,50 220
508 812,8 512,8 88,9 127,0 82,6 609,6 584,2 44,5 723,9
24 “ 24,0 37,00 24,19 4,00 5,50 3,62 28,25 27,25 24 2,00 33,00 312
609,6 939,8 614,4 101,6 139,7 92,0 717,6 692,2 50,8 838,2
82 DIMENSIONS THREADED FLANGES
mø
h1 b h
THREADED FLANGES
gø 0,25”=6,4mm
kø
Dø
ASME B 16.5 Thread type: Standard taper pipe thread to ANSI B 2.1
3/4” 1,05
26,7
1” 1,315
33,4
11/4” 1,66
42,2 Use 1500 Ib dimensions for these sizes
11/2” 1,90
48,3
2” 2,375
60,3
21/2” 2,875
73,0
3“ 3,50 9,50 3,63 1,50 2,12 1,62 5,00 5,00 8 1,00 7,50 11,6
88,9 241,3 92,2 38,1 53,8 41,1 127,0 127,0 25,4 190,5
4“ 4,50 11,50 4,63 1,75 2,75 1,88 6,25 6,19 8 1,25 9,25 19,7
114,3 292,1 117,6 44,5 69,8 47,8 158,7 157,2 31,8 235
5“ 5,563 12,75 5,69 2,00 3,12 2,12 7,50 7,31 8 1,38 11,00 31,9
141,3 349,3 144,5 50,8 79,2 53,8 190,5 185,7 35,1 279,4
6“ 6,625 15,00 6,75 2,19 3,38 2,25 9,25 8,50 12 1,25 12,50 41,1
168,3 381,0 171,5 55,6 85,9 57,2 235 215,9 31,8 317,5
8“ 8,625 18,50 8,75 2,50 4,00 2,50 11,75 10,62 12 1,50 15,50 70,7
219,1 469,9 222,3 63,5 101,6 63,5 298,5 269,7 38,1 393,7
10 “ 10,75 21,50 10,88 2,75 4,25 2,81 14,50 12,75 16 1,50 18,50 101
273 546,1 276,4 69,9 108 71,4 368,3 323,8 38,1 469,9
12 “ 12,75 24,00 12,94 3,12 4,62 3,00 16,50 15,00 20 1,50 21,00 133
323,8 609,6 328,7 79,3 117,3 76,2 419,1 381,0 38,1 533,4
14 “ 14,0 25,25 14,19 3,38 5,12 3,25 17,75 16,25 20 1,62 22,00 153
355,6 641,4 360,4 85,9 130,0 82,6 450,9 412,8 41,1 558,8
16 “ 16,0 27,75 16,19 3,50 5,25 3,38 20,00 18,50 20 1,75 24,25 185
406,4 704,9 411,2 88,9 133,4 85,9 508,0 469,9 44,5 616
18 “ 18,0 31,00 18,19 4,00 6,00 3,50 22,25 21,00 20 2,00 27,00 258
457,2 787,4 462,0 101,6 152,4 88,9 565,2 533,4 50,8 685,8
20 “ 20,0 33,75 20,19 4,25 6,25 3,62 24,50 23,00 20 2,12 29,50 317
508 857,3 512,8 108 158,8 91,9 622,3 584,2 53,8 749,3
24 “ 24,0 41,00 24,19 5,50 8,00 4,00 29,50 27,25 20 2,62 35,50 606
609,6 1041,4 614,4 139,7 203,2 101,6 749,3 692,2 66,5 901,7
THREADED FLANGES 83
mø
lø
jø
1500 LB/SQ. IN.
h b h
1
THREADED FLANGES
gø 0,25”=6,4mm
kø
Dø
Od d J b h h, m g Num- I k kilo
Nom. in. in. in. in. in. in. in. in. ber in. in.
size mm mm mm mm mm mm mm mm mm mm
dN
1/2” 0,84
21,3
3/4” 1,05
26,7
1” 1,315
33,4
11/2” 1,90
48,3
2” 2,375
60,3
ASME
B 16.5
21/2” 2,875 THREA-
73,0 DED
FLANGES
3“ 3,50
88,9
9,50
241,3
3,63
92,2
1,50
38,1
2,12
53,8
1,62
41,1
5,00
127,0
5,00
127,0
8 1,00
25,4
7,50
190,5
11,6 900
1500
4“ 4,50 11,50 4,63 1,75 2,75 1,88 6,25 6,19 8 1,25 9,25 19,7
114,3 292,1 117,6 44,5 69,8 47,8 158,7 157,2 31,8 235
5“ 5,563 12,75 5,69 2,00 3,12 2,12 7,50 7,31 8 1,38 11,00 31,9
141,3 349,3 144,5 50,8 79,2 53,8 190,5 185,7 35,1 279,4
6“ 6,625 15,00 6,75 2,19 3,38 2,25 9,25 8,50 12 1,25 12,50 41,1
168,3 381,0 171,5 55,6 85,9 57,2 235 215,9 31,8 317,5
8“ 8,625 18,50 8,75 2,50 4,00 2,50 11,75 10,62 12 1,50 15,50 70,7
219,1 469,9 222,3 63,5 101,6 63,5 298,5 269,7 38,1 393,7
10 “ 10,75 21,50 10,88 2,75 4,25 2,81 14,50 12,75 16 1,50 18,50 101
273 546,1 276,4 69,9 108 71,4 368,3 323,8 38,1 469,9
12 “ 12,75 24,00 12,94 3,12 4,62 3,00 16,50 15,00 20 1,50 21,00 133
323,8 609,6 328,7 79,3 117,3 76,2 419,1 381,0 38,1 533,4
14 “ 14,0 25,25 14,19 3,38 5,12 3,25 17,75 16,25 20 1,62 22,00 153
355,6 641,4 360,4 85,9 130,0 82,6 450,9 412,8 41,1 558,8
16 “ 16,0 27,75 16,19 3,50 5,25 3,38 20,00 18,50 20 1,75 24,25 185
406,4 704,9 411,2 88,9 133,4 85,9 508,0 469,9 44,5 616
18 “ 18,0 31,00 18,19 4,00 6,00 3,50 22,25 21,00 20 2,00 27,00 258
457,2 787,4 462,0 101,6 152,4 88,9 565,2 533,4 50,8 685,8
20 “ 20,0 33,75 20,19 4,25 6,25 3,62 24,50 23,00 20 2,12 29,50 317
508 857,3 512,8 108 158,8 91,9 622,3 584,2 53,8 749,3
24 “ 24,0 41,00 24,19 5,50 8,00 4,00 29,50 27,25 20 2,62 35,50 606
609,6 1041,4 614,4 139,7 203,2 101,6 749,3 692,2 66,5 901,7
84 DIMENSIONS THREADED FLANGES
mø
h1 b h
THREADED FLANGES
gø 0,25”=6,4mm
kø
Dø
ASME B 16.5 Thread type: Standard taper pipe thread to ANSI B 2.1
3/4” 1,05 5,50 1,14 1,25 1,69 1,25 2,00 1,69 4 0,88 3,75 3,44
26,7 139,7 29,0 31,8 42,9 31,8 50,8 42,9 22,4 95,3
1” 1,315 6,25 1,41 1,38 1,88 1,38 2,25 2,00 4 1,00 4,25 4,82
33,4 158,8 35,8 35,1 47,8 35,1 57,2 50,8 25,4 108,0
11/4” 1,66 7,25 1,75 1,50 2,06 1,50 2,88 2,50 4 1,12 5,12 7,14
42,2 184,2 44,5 38,1 52,3 38,1 73,2 63,5 28,4 130,0
11/2” 1,90 8,00 1,99 1,75 2,38 1,75 3,12 2,88 4 1,25 5,75 10,0
48,3 203,2 50,5 44,5 60,5 44,5 79,2 73,2 31,8 146,1
2” 2,375 9,25 2,50 2,00 2,75 2,00 3,75 3,62 8 1,12 6,75 14,8
60,3 235,0 63,5 50,8 69,9 50,8 95,3 91,9 28,4 171,5
21/2” 2,875 10,50 3,00 2,25 3,12 2,25 4,50 4,12 8 1,25 7,75 21,5
73,0 266,7 76,2 57,2 79,2 57,2 114,3 104,6 31,8 196,9
3“ 3,50 12,00 3,63 2,62 3,62 2,50 5,25 5,00 8 1,38 9,00 32,6
88,9 304,8 92,2 66,5 91,9 63,5 133,4 127,0 35,1 228,6
4“ 4,50 14,00 4,63 3,00 4,25 2.75 6,50 6,19 8 1,62 10,75 52,9
114,3 355,6 117,6 76,2 108,0 69,9 165,1 157,2 41,1 273,1
5“ 5,563 16,50 5,69 3,62 5,12 3,00 8,00 7,31 8 1,88 12,75 83,1
141,3 419,1 144,5 91,9 130,0 76,2 203,2 185,7 47,8 323,8
6“ 6,625 19,00 6,75 4,25 6,00 3,25 9,25 8,50 8 2,12 14,50 128
168,3 482,6 171,5 108,0 152,4 82,6 235,0 215,9 53,8 368,3
8“ 8,625 21,75 8,75 5,00 7,00 3,75 12,00 10,62 12 2,12 17,25 188
219,1 552,5 222,3 127,0 177,8 95,3 304,8 269,7 53,8 438,2
10 “ 10,75 26,50 10,88 6,50 9,00 4,25 14,75 12,75 12 2,62 21,25 355
273 673,1 276,4 165,1 228,6 108,0 374.7 323,8 66,5 539,8
12 “ 12,75 30,00 12,94 7,25 10,00 4,75 17,38 15,00 12 2,88 24,38 504
323,8 762,0 328,7 184,2 254,0 120,7 441,5 381,0 73,2 619,3
THREADED FLANGES 85
ASME B 16.5
ASME
B 16.5
THREA-
DED
FLANGES
2500
86
Ulmz
87
B.S. 3293
BRITISH STANDARD 89
B.S. 3293
GENERAL SURVEY
Nominal Pressure Ib/sq. in. 150 300 400 600
Nenndruck kp/cm2 10,6 21,1 28,1 42,2
Nenndruck N/cm2 104 207 276 414
Type of flange from 26” to max. Nominal Sizes
WELDING ENDS
BRITISH
STD
B.S.
37 1/2 º ±2 1/2º 3293
10º±1º
Radius
37 1/2 º ± 2 1/2º
T
T
3/4”=
19,0mm
±1/32º=
1/16º
1/16º± 1/32º=
1,6mm ±0,8mm
1,6mm ±0,8mm
recommended Bevel for Wall Thicknesses (T) at recommended Bevel for Wall Thicknesses (T) at
End of Flange, 3/4” or less. End of Flange, greater than 3/4”.
90 DIMENSIONS BRITISH STANDARD
mø
aø
1/15”=1,6mm
gø
kø 0,06”=1,6mm
Dø
B.S. 3293
Pipe Flange Hub raised drilling Template Approx.
Face Weight
mø
aø
371/2”
lø
Jø
h
WELDING NECk FLANGES
b
gø
kø 1/4”=6,4mm
Dø
B.S. 3293
Pipe Flange Hub raised drilling Template Approx.
Face Weight
mø
aø
1/15”=1,6mm
B.S. 3293
Pipe Flange Hub rai- drilling Template ring Joint Approx.
sed Weight
Face
28” 28,0 40 3/4 3 3/8 7 3/4 28 1/4 30 1/2 33 7/8 28 1 3/4 37 31 1/2 1/2 25/32 360
711,2 1035,1 85,7 196,9 717,6 774,7 860,4 44.5 939,8 800,1 12,7 19,8
30” 30,0 43 3 5/8 8 1/4 30 1/4 32 9/16 36 1/8 28 1 7/8 39 1/4 33 3/4 1/2 25/32 412
762 1092,2 92,1 209,6 768,4 827,1 917,6 47,6 997 857,3 12,7 19,8
32” 32,0 45 1/4 3 7/8 8 3/4 32 1/4 34 11/16 38 3/4 28 2 41 1/2 36 9/16 29/32 465
812,8 1149,4 98,4 222,3 819,2 881,1 984,3 50,8 1054,1 914,4 14,3 23,0
34” 34,0 47 1/2 4 9 1/8 34 5/16 36 7/8 40 3/4 28 2 43 1/2 38 9/16 29/32 536
863,6 1206,5 101,6 231,8 871,5 936,6 1035,1 50,8 1104,9 965,2 14,3 23,0
36” 36,0 50 4 1/8 9 1/2 36 5/16 39 43 32 2 1/6 46 40 1/4 9/16 29/32 595
914,4 1270,0 104,8 241,3 922,4 990,6 1092,2 54,0 1168,4 1022,4 14,3 23,0
660,4 971,6 88,9 193,7 668,4 727,1 809,6 47,6 876,3 749,3 12,7 19,8
28” 28,0 40 3/4 3 3/4 8 1/8 28 5/16 30 13/16 33 7/8 28 2 37 31 1/2 1/2 25/32 409
711,2 1035,1 95,3 206,4 719,2 782,7 860,4 50,8 939,8 800,1 12,7 19,8
30” 30,0 43 4 8 5/8 30 5/16 32 15/16 36 1/8 28 2 1/8 39 1/4 33 3/4 1/2 25/32 465
762 1092,2 101,6 219,1 770 836,6 917,6 54,0 997 857,3 12.7 19,8
32” 32,0 45 1/4 4 1/4 9 1/8 32 3/8 35 38 3/4 28 2 1/8 411/2 36 9/16 29/32 539
812,8 1149,4 108 231,8 822,3 889,0 984,3 54,0 1054,1 914,4 14,3 23,0
34” 34,0 47 1/2 4 3/8 9 1/2 34 3/8 37 3/16 40 3/4 28 2 1/8 43 1/2 38 9/16 29/32 608
863,6 1206,5 111,1 241,3 873,1 944,6 1035,1 54,0 1104,9 965,2 14,3 23,0
36” 36,0 50 4 1/2 9 7/8 36 7/16 39 3/8 43 32 2 1/8 46 40 1/2 9/16 29/32 689
914,4 1270,0 114,3 250,8 925,5 1000,1 1092,2 54,0 1168,4 1022,4 14,3 23,0
BRITISH STANDARD 93
mø
aø
1/15”=1,6mm
lø Jø
371/2”
h
600 LB/SQ. IN.
b
WELDING NECk FLANGES
R 1/16”=1,6 mm
E
F
f 1)
RING jOINT TYPE
23º pø
gø
kø
Dø
B.S. 3293
Pipe Flange Hub rai- drilling Template ring Joint Approx.
sed Weight
Face
28” 28,0 42 1/4 4 3/8 9 1/4 28 1/2 31 5/8 33 7/8 28 2 1/8 38 31 1/2 1/2 25/32 518
711,2 1073,2 111,1 235 723,9 803,3 860.4 54,0 965,2 800,1 12,7 19,8
30” 30,0 44 1/2 4 1/2 9 3/4 30 1/2 33 15/16 36 1/8 28 2 1/8 40 1/4 33 3/4 1/2 25/32 570
762 1130,3 114,3 247,7 774,7 862,0 917,6 54,0 1022.4 857,3 12,7 19,8
32” 32,0 47 4 5/8 10 1/4 32 1/2 36 1/8 38 3/4 28 2 3/8 42 1/2 36 9/16 29/32 697
812,8 1193,8 117,5 260.4 825,5 917,6 984,2 60,3 1079,5 914.4 14,3 23,0
34” 34,0 49 4 3/4 10 5/8 34 9/16 38 5/16 40 3/4 28 2 3/8 44 1/2 38 9/16 29/32 735
863,6 1244,6 120,7 269,9 877,9 973,2 1035, 1 60,3 1130,3 965,2 14,3 23,0
36” 36,0 51 3/4 4 7/8 11 1/8 36 9/16 40 5/8 43 28 2 5/8 47 40 1/4 9/16 29/32 800
914,4 1314,5 123,8 282,6 928,7 1031,9 1092,2 66,7 1193,8 1022,4 14,3 23,0
BRITISH
STD
B.S.
3293
94 DIMENSIONS BRITISH STANDARD
B.S. 3293
Pipe Flange Hub raised drilling Template Approx.
Face Weight
Nom. Od d J b h m g Num- I k kilo
size in. in. in. in. in. in. in. ber in. in.
dN mm mm mm mm mm mm mm mm mm
26” 26,0 34 1/4 26 1/4 2 3 3/8 28 1/2 29 1/4 24 1 3/8 31 3/4 107
660,4 870 666,8 50,8 85,7 723,9 743 34,9 806,5
28” 28,0 36 1/2 28 1/4 2 1/16 3 7/16 30 3/4 31 1/4 28 1 3/8 34 122
711,2 927,1 717,6 52,4 87,3 781,1 793,8 34,9 863,6
30” 30,0 38 3/4 30 1/4 2 1/8 3 1/2 32 3/4 33 3/4 28 1 3/8 36 138
762 984,3 768,4 54,0 88,9 831,9 857,3 34,9 914,4
32” 32,0 41 3/4 32 1/4 2 1/4 3 5/8 35 35 3/4 28 1 5/8 38 1/2 170
812,8 1060,5 819,2 57,2 92,1 889,0 908,1 41,3 977,9
34” 34,0 43 3/4 34 1/4 2 5/16 3 11/16 37 37 3/4 32 1 5/8 40 1/2 184
863,6 1111,3 870 58,8 93,7 939,8 958,9 41,3 1028,7
36” 36,0 46 36 1/4 2 3/8 3 3/4 39 1/4 40 1/4 32 1 5/8 42 1/2 211
914,4 1168,4 920,8 60,3 95,3 997 1022,4 41,3 1085,9
38” 38,0 48 3/4 38 1/4 2 3/8 3 3/4 41 3/4 42 1/4 32 1 5/8 45 1/4 249
965,2 1238,3 971,6 60,3 95,3 1060,5 1073,2 41,3 1149,4
40” 40,0 50 3/4 40 1/4 2 1/2 3 7/8 43 3/4 44 1/4 36 1 5/8 47 1/4 272
1016,0 1289,1 1022,4 63,5 98,4 1111 ,3 1124 41,3 1200,2
42” 42,0 53 42 1/4 2 5/8 4 46 47 36 1 5/8 49 1/2 313
1066,8 1346,2 1073,2 66,7 101,6 1168,4 1193,8 41,3 1257,3
44” 44,0 55 1/4 44 1/4 2 5/8 4 48 49 40 1 5/8 51 3/4 331
1117,6 1403,4 1124 66,7 101,6 1219,2 1244,6 41,3 1314,5
46” 46,0 57 1/4 46 1/4 2 11/16 4 1/16 50 51 40 1 5/8 53 3/4 349
1168,4 1454,2 1174,8 68,3 103,3 1270,0 1295,4 41,3 1365,3
48” 48,0 59 1/2 48 1/4 2 3/4 4 1/8 52 1/4 53 1/2 44 1 5/8 56 381
1219,2 1511,3 1225,6 69,9 104,8 1327,2 1358,9 41,3 1422,4
mø
jø
400 LB/SQ. IN.
lø
h SLIP ON FLANGES
b
gø
kø =6,4 mm
1/4”
Dø
B.S. 3293
Pipe Flange Hub raised drilling Template Approx.
Face Weight
Nom. Od d J b h a m g Num- I k kilo
size in. in. in. in. in. in. in. in. ber in. in.
dN mm mm mm mm mm mm mm mm mm mm
26” 26,0 38 1/4 26 1/4 3 1/2 7 5/8 27 5/16 28 5/8 29 1/2 28 1 7/8 34 1/2 295
660,4 971,6 666,8 88,9 193,7 693,8 727,1 749,3 47,6 876,3
28” 28,0 40 3/4 28 1/4 3 3/4 8 1/8 29 3/8 30 13/16 31 1/2 28 2 37 354
711,2 1035,1 717,6 95,3 206,4 746,1 782,7 800,1 50,8 939,8
30” 30,0 43 30 1/4 4 8 5/8 31 1/2 32 15/16 33 3/4 28 2 1/8 39 1/4 408
762 1092,2 768,4 101,6 219,1 800,1 836,6 857,3 54,0 997
32” 32,0 45 1/4 32 1/4 4 1/4 9 1/8 33 9/16 35 36 28 2 1/8 41 1/2 465
812,8 1149,4 819,2 108 231,8 852,5 889,0 914,4 54,0 1054,1
34” 34,0 47 1/2 34 1/4 4 3/8 9 1/2 35 5/8 37 3/16 38 28 2 1/8 43 1/2 522
863,6 1206,5 870 111,1 241,3 904,9 944,6 965,2 54,0 1104,9
36” 36,0 50 36 1/4 4 1/2 9 7/8 37 3/4 39 3/8 40 1/4 32 2 1/8 46 601
914,4 1270,0 920,8 114,3 250,8 958,8 1000,1 1022,4 54,0 1168,4
mø
lø
Jø h
R =1,6 mm
1/16”
F
23º f 1)
pø
gø
kø
Dø
B.S. 3293
Pipe Flange Hub rai- drilling Template ring Joint Approx.
sed Weight
Face
mø
lø
Jø h
E
b
SLIP ON FLANGES RING jOINT TYPE
R =1,6 mm
1/16”
F
23º f 1)
pø
gø
kø
Dø
B.S. 3293
Pipe Flange Hub rai- drilling Template ring Joint Approx.
sed Weight
Face
30” 30,0 44 1/2 30 1/4 4 1/2 9 3/4 32 1/16 33 15/16 36 1/8 28 2 1/8 40 1/4 33 3/4 1/2 25/32 537
762 1130,3 768,4 114,3 247,7 814,4 862,0 917,6 54,0 1022,4 857,3 12,7 19,8
32” 32,0 47 32 1/4 4 5/8 10 1/4 34 3/16 36 1/8 38 3/4 28 2 3/8 42 1/2 36 9/16 29/32 622
812,8 1193,8 819,2 117,5 260,4 868,4 917,6 984,3 60,3 1079,5 914,4 14,3 23,0
34” 34,0 49 34 1/4 4 3/4 10 5/8 36 5/16 38 5/16 40 3/4 28 2 3/8 44 1/2 38 9/16 29/32 670
863,6 1244,6 870 120,7 269,9 922,3 973,2 1035,0 60,3 1130,3 965,2 14,3 23,0
36” 36,0 51 3/4 36 1/4 4 7/8 11 1/8 38 7/16 40 5/8 43 28 2 5/8 47 40 1/4 9/16 29/32 764
914,4 1314,5 920,8 123,8 282,6 976,3 1031,9 1092,2 66,7 1193,8 1022,4 14,3 23,0
BRITISH
STD
B.S.
3293
98
Ulmz
99
ASME B 16.47
SERIES A
GENERAL SURVEY
Nominal Pressure Ib/sq. in. 150 300 400 600 900
Nenndruck kp/cm’ 10,6 21,1 28,1 42,2 63,3
Nenndruck N/cm’ 104 207 276 414 621
Type of Flange from 26” to max. Nominal Sizes
Materials
The steel used shall be suitable for field welding to other flanges, fittings, or pipe manufactured under ASTM specifications A105, A53, A106, A381,
A694, A707, or API Standards 5L and 5LX, C max, 0.35 %, C.E.max, 0.50 %.
C.E. = C + Mn + Cr + Mo + V + Ni + Cu
6 5 15
dimensional Tolerances
Outside diameter, 0.06 in. (1.6 mm) raised face: Sizes NPS 26 and larger:!: 0.08 in. (2 mm). Outside diameter, 0.25 in. (6.4 mm) raised face: Sizes NPS 26 and
larger:!: 0.04 in. (1 mm).
Flange Thickness
To 1.0 in. (25.4 mm): + 0.12 in. (3.0 mm),
-0
1.0 in. (25.4 mm) - 2.0 in. (50.8 mm): + 0.19 in. (4.8 mm),
-0
2.0 in. (50.8 mm) - 3.0 in. (76.2 mm): + 0.31 in. (7.9 mm),
-0
Over 3.0 in. (76.2 mm): + 0.38 in. (9.7 mm),
-0
ASME B 16.47
SERIES A
37 1/2 º ± 2 1/2º
37 1/2 º ± 2 1/2º
t t
0,06” ±0,03” =
0,06” ±0,03” =
1,6mm ±0,8mm
1,6mm ±0,8mm
aø Jø mø aø
Jø mø
Bevel for Wall Thicknesses (I) 0.19” to 0.88” inclusive Bevel for Wall Thicknesses (t) greater than 0.88”
MARkING ASME
B 16.47
Flanges shall be marked in accordance with the rules established in MSS Standard Practice SP-25, Standard Marking System for Valves, Fittings, Flanges,
and Unions. In addition, the letters, “PL” shall precede the grade symbol marking. SERIES
A
102 DIMENSIONS SERIES A: WELDING NECK FLANGES
ASME B 16.47
SERIES A
SERIES A: WELDING NECK FLANGES 103
ASME B 16.47
SERIES A
Pipe Flange dimensions Hub drilling raised Fillet Approx.
size dimen. Face radius Weight
Od Thick Length Od No. dia. dia. dia. (min)
Of of Thru Large of Bolt of Bolt of Bolt
Flange Flange Hub End Holes Holes Circle
Hub
O C y x r A
radius Welding- Blind
in. in. in. in. in. in. in. in. in. Neck
mm mm mm mm mm mm mm mm mm
kg kg
26,00 34,25 2,63 4,69 26,62 24 1,38 31,75 29,50 0,38 147 306
660,4 870.0 66,7 119,1 676,1 35,1 806,5 749,3 9,7
28,00 36,50 2,75 4,88 28,62 28 1,38 34,00 31,50 0,44 163 363
711,2 927,1 69,8 123,9 726,9 35,1 863,6 800,1 11,2
30,00 38,75 2,88 5,32 30,75 28 1,38 36,00 33,75 0,44 190 430
762,0 984.3 73,1 135,1 781,1 35,1 914,4 857,3 11,2
32,00 41,75 3,12 5,63 32,75 28 1,62 38,50 36,00 0,44 238 537
812,8 1060,5 79,2 142,9 831,9 41,1 977,9 914,4 11,2
34,00 43,75 3,19 5,82 34,75 32 1,62 40,50 38,00 0,50 255 600
863,6 1111,3 81 147,8 882,7 41,1 1028,7 965,2 12,7
36,00 46,00 3,5 6,13 36,75 32 1,62 42,75 40,25 0,50 302 730
914,4 1168,4 88,8 155,6 933,5 41,1 1085,9 1022,4 12,7
38,00 48,75 3,38 6,13 39,00 32 1,62 45,25 42,25 0,50 342 792
965.2 1238,3 85,8 155,6 990,6 41,1 1149,4 1073,2 12,7
40,00 50,75 3,5 6,38 41,00 36 1,62 47,25 44,25 0,50 366 893
1016,0 1289,1 88,8 162 1041,4 41,1 1200,2 1124,0 12,7
42,00 53,00 3,75 6,69 43,00 36 1,62 49,50 47,00 0,50 419 1044
1066,8 1346,2 95,2 169,9 1092,2 41,1 1257,3 1193,8 12,7
44,00 55,25 3,94 6,94 45,00 40 1,62 51,75 49,00 0,50 459 1190
1117,6 1403.4 100 176,2 1143,0 41,1 1314,5 1244,6 12,7
46,00 57,25 4 7,25 47,12 40 1,62 53,75 51,00 0,50 500 1299
1168.4 1454,2 101,5 184,1 1196,8 41,1 1365,3 1295.4 12,7
48,00 59,50 4,19 7,5 49,12 44 1,62 56,00 53,50 0,50 552 1470
1219,2 1511,3 106,4 189,7 1247,6 41,1 1422,4 1358,9 12,7
ASME
50,00 61,75 4,32 7,94 51,25 44 1,88 58,25 55,50 0,50 592 1615 B 16.47
1270,0 1568,5 109,7 201,6 1301,8 47,8 1479,6 1409,7 12,7
SERIES
4,5 8,19 A
52,00 64,00 53,25 44 1,88 60,50 57,50 0,50 660 1817
1320,8 1625,6 114,2 208 1352,6 47,8 1536,7 1460,5 12,7 150
54,00 66,25 4,69 8,44 55,25 44 1,88 62,75 59,50 0,50 726 2031
1371,6 1682,8 119,1 214,3 1403,4 47,8 1593,9 1511,3 12,7
56,00 68,75 4,82 8,94 57,38 48 1,88 65,00 62,00 0,50 805 2244
1422,4 1746,3 122,4 227 1457,5 47,8 1651,0 1574,8 12,7
58,00 71,00 5 9,19 59,38 48 1,88 67,25 64,00 0,50 884 2491
1473,2 1803.4 126,9 233,4 1508,3 47,8 1708,2 1625,6 12,7
60,00 73,00 5,13 9,38 61,38 52 1,88 69,25 66,00 0,50 930 2697
1524,0 1854,2 130,2 238,2 1559,1 47,8 1759,0 1676.4 12,7
104 DIMENSIONS SERIES A: WELDING NECK FLANGES
ASME B 16.47
SERIES A
Pipe Flange dimensions Hub drilling Approx.
size dimen. Weight
Od Thick of Bid. Length Od No dia. dia.
Of Flange fig. Thru Large of Bolt of Bolt of Bolt
Flange Weld- Hub End Holes Holes Circle
Neck Hub
O C E y x
Welding Blind
in. in. in. in. in. in. in. in. Neck
mm mm mm mm mm mm mm mm
kg kg
26,00 38,25 3,06 3,31 7,19 28,38 28 1,75 34,50 275 460
660.4 971 6 77,6 84.1 182,6 720.9 44,5 876.3
28,00 40,75 3,32 3,56 7,69 30,50 28 1,75 37,00 340 566
711 2 1035,1 84,3 90.4 195,3 774.7 44.5 939.8
30,00 43,00 3,56 3,75 8,19 32,56 28 1,88 39,25 389 663
762.0 1092,2 90,3 95.3 208 827,0 47.8 997.0
32,00 45,25 3,82 3,94 8,69 34,69 28 2,00 41,50 438 770
812.8 1149.4 97 100.1 220,7 881.1 50.8 1054.1
34,00 47,50 3,94 4,12 9,06 36,88 28 2,00 43,50 498 894
863,6 1206.5 100 104.6 230 936.8 50.8 1104.9
36,00 50,00 4,06 4,38 9,44 39,00 32 2,12 46,00 563 1040
914.4 1270.0 103 111.3 239,7 990,6 53.8 1168.4
38,00 46,00 4,19 4,25 7,06 39,12 32 1,62 43,00 307 872
965.2 1168.4 106,4 108.0 179,2 993.6 41.1 1092.2
40,00 48,75 4,44 4,50 7,56 41,25 32 1,75 45,50 372 1035
1016,0 1238.3 112,7 114,3 191,9 1047.8 44.5 1155.7
42,00 50,75 4,63 4,69 7,82 43,25 32 1,75 47,50 409 1173
1066.8 1289.1 117,5 119.1 198,6 1098,6 44.5 1206.5
44,00 53,25 4,82 4,88 8,06 45,25 32 1,88 49,75 464 1340
1117.6 1352.6 122,4 124.0 204,6 1149.4 47.8 1263.7
48,00 57,75 5,19 5,25 8,75 49,38 32 2,00 54,00 567 1700
1219.2 1466.9 131,8 133.4 221,3 1254.3 50.8 1371.6
50,00 60,25 5,44 5,50 9,06 51,38 32 2,12 56,25 643 1936
1270.0 1530.4 138,1 139.7 230 1305.1 53,8 1428,8
52,00 62,25 5,63 5,69 9,32 53,38 32 2,12 58,25 694 2143
1320.8 1581.2 142,9 144.5 236,7 1355,9 53,8 1479.6
54,00 65,25 5,94 6,00 9,88 55,50 28 2,38 61,00 832 2486
1371.6 1657.4 150,8 152.4 250,9 1409.7 60.5 1549.4
58,00 69,25 6,19 6,25 10,44 59,62 32 2,38 65,00 928 2913
1473.2 1759.0 157,2 158.8 265,1 1514,3 60.5 1651.0
60,00 71,25 6,38 6,44 10,69 61,62 32 2,38 67,00 989 3184
1524,0 1809,8 162 163,6 271,5 1565,1 60,5 1701,8
SERIES A: WELDING NECK FLANGES 105
ASME B 16.47
SERIES A
Pipe raised Fillet Facing dimensions groove
size Face radius ring Type Joint Fillet
dia, (min) radius
Facing depth of Pitch Width of ring
dia. groove dia, groove No.
r A k L P d A r
radius radius
in. in. in. in. in. in. in. ring rin.
mm mm mm mm mm mm mm Nr. mm
ASME B 16.47
SERIES A
Pipe Flange dimensions Hub drilling Approx.
size dimen. Weight
Od Thick of Flange Length 0d No. dia. dia.
of Weld- Bid. Thru Large of Bolt of Bolt of Bolt
Flange Neck fig. Hub End Holes Holes Circle
Hub
O C E y x
Welding Blind
in. in. in. in. in. in. in. in. Neck
mm mm mm mm mm mm mm mm
kg kg
26,00 38.25 3,50 3,88 7,62 28,62 28 1,88 34,50 304 534
660.4 971,6 88,9 98,6 193.5 726.9 47.8 876,3
28,00 40,75 3,75 4,12 8,12 30,81 28 2,00 37,00 362 645
711.2 1035,1 95.3 104.6 206,2 782.6 50.8 939,8
30,00 43,00 4,00 4,38 8,62 32,94 28 2,12 39,25 415 760
762,0 1092,2 101.6 111.3 218.9 836.7 53.8 997.0
32,00 45,25 4,25 4,56 9,12 35,00 28 2,12 41,50 478 885
812,8 1149,4 108,0 115.8 231,6 889,0 53.8 1054.1
34,00 47,50 4,38 4,81 9,50 37,19 28 2,12 43,50 538 1035
863,6 1206 5 111.3 122,2 241.3 944.6 53.8 1104.9
36,00 50,00 4,50 5,06 9,88 39,38 32 2,12 46,00 604 1205
914.4 1270.0 114,3 128.5 251.0 1000.3 53,8 1168,4
38,00 47,50 4,88 4,88 8,12 39,50 32 1,88 44,00 406 1055
965,2 1206,5 124.0 124.0 206.2 1003,3 47.8 1117.6
40,00 50,00 5,12 5,12 8,50 41,50 32 2,00 46,25 473 1229
1016.0 1270.0 130,0 130,0 215,9 1054,1 50,8 1174.8
42,00 52,00 5,25 5,52 8,81 43,62 32 2,00 48,25 513 1366
1066,8 1320,8 133.4 133,4 223.8 1107.9 50,8 1225.6
44,00 54,50 5,50 5,50 9,19 45,62 32 2,12 50,50 586 1569
1117,6 1384,3 139.7 139.7 233.4 1158.7 53.8 1282.7
46,00 56,75 5,75 5,75 9,62 47,75 36 2,12 52,75 648 1776
1168.4 1441.5 146.1 146,1 244,3 1212.9 53.8 1339,9
48,00 59,50 6,00 6,00 10,12 49,88 28 2,38 55,25 768 2043
1219.2 1511.3 152,4 152.4 256,0 1267.0 60.5 1403.4
50,00 61,75 6,19 6,25 10,56 52,00 32 2,38 57,50 832 2294
1270,0 1568,5 157,2 158.8 268.2 1320.8 60.5 1460.5
52,00 63,75 6,38 6,44 10,88 54,00 32 2,38 59,50 897 2500
1320.8 1619,3 162,1 163.6 276,4 1371.6 60.5 1511.3
54,00 67,00 6,69 6,75 11,38 56,12 28 2,62 62,25 1086 2900
1371,6 1701,8 169,9 171,5 289,1 1425,4 66.5 1581,2
56,00 69,00 6,88 6,94 11,75 58,25 32 2,62 64,25 1139 3174
1422,4 1752,6 174,8 176,3 298.5 1479.6 66.5 1632.0
58,00 71,00 7,00 7,12 12,06 60,25 32 2,62 66,25 1208 3462
1473,2 1803,4 177,8 180,8 306,3 1530,4 66.5 1682.8
60,00 74,25 7,31 7,44 12,56 62,38 32 2,88 69,00 1408 3940
1524,0 1886,0 185,7 189,0 319,0 1584,5 73,2 1752,6
SERIES A: WELDING NECK FLANGES 107
ASME B 16.47
SERIES A
Pipe raised Fillet Facing dimensions groove
size Face radius ring Type Joint Fillet
dia. (min) radius
Facing depth of Pitch Width of ring
dia. groove dia. groove No.
r A k L P d A r
radius radius
in. in. in. in. in. in. in. ring in.
mm mm mm mm mm mm mm Nr. mm
ASME B 16.47
SERIES A
Pipe Flange dimensions Hub drilling Approx.
size dimen. Weight
Od Thick of Flange Length Od No of dia, dia.
of Weld- Bid. Large Bolt of Bolt of Bolt
Flange Neck fIg. Thru End Holes Holes Circle
Hub Hub
O C E y x
Welding Blind
in. in. in. in. in. in. in. in. Neck
mm mm mm mm mm mm mm mm
kg kg
26,00 40 4,25 4,94 8,75 29,44 28 2 36 427 740
660.4 1016 108 125.5 222,3 747.8 50,8 914.4
30,00 44,5 4,5 5,5 9,75 33,94 28 2,12 40,25 545 1030
762 1130,3 114.3 139,7 247.7 862.1 53.8 1022.4
46,00 59,5 7,06 7,31 11,81 48,62 32 2,62 54,75 1054 2450
1168,4 1511.3 179.3 185.7 300 1234.9 66.5 1390.7
48,00 62,75 7,44 7,69 12,44 50,75 32 2,88 57,5 1200 2850
1219,2 1593,9 189 195.3 314.7 1289,1 73,2 1460.5
56,00 73,00 8,56 8,88 14,25 59,12 32 3,38 66,75 1709 4450
1422,4 1854,2 217,4 225,6 362,0 1501,6 85,9 1695,5
58,00 75,00 8,75 9,12 14,56 61,12 32 3,38 68,75 1916 4850
1473,2 1905,0 222,3 231.6 3369.8 1552,4 85,9 1746,3
60,00 78,50 9,19 9,56 15,31 63,38 28 3,62 71,75 2300 5588
1524,0 1993,9 233,4 242,8 388,9 1609,9 91,9 1822,5
SERIES A: WELDING NECK FLANGES 109
ASME B 16.47
SERIES A
Pipe raised Fillet Facing dimensions groove
size Face radius ring Type Joint Fillet
dia. (min) radius
Facing depth of Pitch Width of ring
dia. groove dia. groove No.
r A k L P d A r
radius
in. in. in. in. in. in. in. ring in.
mm mm mm mm mm mm mm Nr. mm
ASME B 16.47
SERIES A
Pipe Flange dimensions Hub drilling Approx.
size Weight
Od Thick of Flange Length ad dimen dia. dia.
of Thru Large of Bolt of Bolt
Weld- Bid. Holes Circle
Flange Hub End
Neck fig.
Hub
O C E y x
Welding Blind
in. in. in. in. in. in. in. in. Neck
mm mm mm mm mm mm mm mm
kg kg
26,00 42,75 5,50 6,31 11,25 30,50 20 2,88 37,50 692 1060
660,4 1085,9 139,7 160,3 285,8 774,7 73,2 952,5
28,00 46,00 5,62 6,75 11,75 32,75 20 3,12 40,25 822 1306
711,2 1168,4 142,7 171,5 298,5 831,9 79,2 1 022,4
30,00 48,50 5,88 7,18 12,25 35,00 20 3,12 42,75 962 1565
762,0 1231,9 149,4 182,4 311,2 889,0 79,2 1085,9
32,00 51,75 6,25 7,62 13,00 37,25 20 3,38 45,50 1155 1885
812,8 1314,5 158,8 193,5 330,2 946,2 85,9 1155,7
34,00 55,00 6,50 8,06 13,75 39,62 20 3,62 48,25 1348 2250
863,6 1397,0 165,1 204,7 349,3 1006,3 91,9 1225,6
36,00 57,50 6,75 8,44 14,25 41,88 20 3,62 50,75 1541 2595
914,4 1460,5 171,5 214,4 362,0 1063,8 91,9 1289,1
38,00 57,50 7,50 8,50 13,88 42,25 20 3,62 50,75 1537 2610
965,2 1460,5 190,5 215,9 352,6 1073,2 91,9 1289,1
40,00 59,50 7,75 8,81 14,31 44,38 24 3,62 52,75 1643 2870
1016,0 1511,3 196,9 223,8 363,5 1127,3 91,9 1339,9
42,00 61,50 8,12 9,12 14,62 46,31 24 3,62 54,75 1798 3195
1066,8 1562,1 206,2 231,6 371,3 1176,3 91,9 1390,7
44,00 64,88 8,44 9,56 15,38 48,62 24 3,88 57,62 1952 3720
1117,6 1648,0 214,4 242,8 390,7 1234,9 98,6 1463,5
46,00 68,25 8,88 10,06 16,18 50,88 24 4,12 60,50 2107 4579
1168,4 1733,6 225,6 255,5 411,0 1292,4 104,6 1536,7
48,00 70,25 9,19 10,38 16,50 52,88 24 4,12 62,50 2260 4730
1219,2 1784,4 233,4 263,7 417,5 1343,2 104,6 1587,5
SERIES A: WELDING NECK FLANGES 111
ASME B 16.47
SERIES A
Pipe raised Fillet Facing dimensions groove
size Face radius Fillet
ring Type Joint
dia. (min) radius
Facing depth of Pitch Width of ring
dia groove dia. groove No.
r A k L P d A r
radius radius
in. in. in. in. in. in. in. ring in.
mm mm mm mm mm mm mm Nr. mm
26,00 29,50 0,44 32,75 0,69 29,50 1,19 R100 0,09
660,4 749,3 11,2 831,9 17,5 749,3 30,2 2,3
SERIES
A
900
112
Ulmz
113
ASME B 16.47
SERIES B
SERIES B: WELDING NECK AND BLIND FLANGES 115
ASME B 16.47
SERIES B
GENERAL SURVEY
Nominal Pressure Ib/sq, in. 75 150 300 400 600 900
Nenndruck kp/cm’ 5,3 10,6 21,1 2S,1 42,2 63,3
Nenndruck Niem’ 52 104 207 276 414 621
Type of Flange from 26” to max. Nominal Sizes
t
a = Outside diameter of hub t
(top)
m = Diameter of hub aø
aø Jø mø Jø mø
ASME
B 16.47
SERIES
B
Bevel for Wan Thicknesses (I) 0.19” to O.SS” inclusive Bevel for Wall Thicknesses (t) greater than O.SS”
150 lb/sq.in
300 lb/sq.in
116 DIMENSIONS SERIES B: WELDING NECK AND BLIND FLANGES
mø
aø
1,6mm
1/16”
75 LB/SQ. IN. lø 1)
Jø
371/2º
r
h
1/16”
SERIES B
Pipe Flange dimensions Hub rai- drilling Template Approx. Approx.
Weight Weight
sed
Face
26” 26 30 1,31 1,25 2,25 26,06 26,62 0,31 27,75 36 0,75 28,5 40 116
660,4 762,0 33,3 31,7 57,1 661,9 676,1 7,9 704,9 19,1 723,9
28” 28,0 32 1,31 1,25 2,38 28,06 28,62 0,31 29,75 40 0,75 30,5 44 132
711,2 812,8 33,3 31,7 60,4 712,7 726,9 7,9 755,7 19,1 774,7
30” 30 34 1,31 1,25 2,5 30,06 30,62 0,31 31,75 44 0,75 32,5 48 150
762,0 863,6 33,3 31,7 63,4 763,5 777.7 7,9 806,5 19,1 825,5
32” 32 36 1,44 1,32 2,69 32,06 32,62 0,31 33,75 48 0,75 34,5 54 177
812,8 914,4 36,6 33,5 68,3 814,3 828,5 7,9 857,3 19,1 876,3
34” 34 38 1,50 1,32 2,82 34,06 34,62 0,31 35,75 52 0,75 36,5 59 196
863,6 965,2 38,1 33,5 71,6 865,1 879,3 7,9 908,1 19,1 927,1
36” 36 40,69 1,67 1,38 3,32 36,06 36,81 0,38 38 40 0,88 39,06 78 236
914,4 1033,5 42,4 35 84,3 915,9 935,0 9.7 965,2 22,4 992,1
38” 38,00 42,69 1,75 1,44 3,44 38,06 38,81 0,38 40 40 0,88 41,06 85 271
965,2 1084,3 44,5 36,5 87,3 966,7 985,8 9,7 1016,0 22,4 1042,9
40” 40,00 44,69 1,75 1,44 3,56 40,06 40,81 0,38 42 44 0,88 43,06 93 346
1016,0 1135,1 44,5 36,5 90,3 1017,5 1036,6 9,7 1066,8 22,4 1093,7
42” 42 46,69 1,88 1,5 3,69 42,06 42,81 0,38 44 48 0,88 45,06 100 407
1066,8 1185,9 47,8 38 93,7 1068,3 1087,4 9,7 1117,6 22,4 1144,5
44” 44 49,25 1,94 1,63 4,06 44,06 44,88 0,38 46,25 36 1,00 47,38 113 484
1117,6 1251,0 49,3 41,3 103 1119,1 1140,0 9,7 1174,8 25,4 1203,5
46” 46 51,25 2,00 1,69 4,19 46,06 46,88 0,38 48,25 40 1,00 49,38 127 539
1168,4 1301,8 50,8 42,9 106,4 1169,9 1190,8 9,7 1225,6 25,4 1254,3
48” 48 53,25 2,12 1,75 4,32 48,06 48,88 0,38 50,25 44 1,00 51,38 141 598
1219,2 1352,6 53,8 44,4 109,7 1220,7 1241,6 9,7 1276,4 25,4 1305,1
50” 50,00 55,25 2,18 1,82 4,5 50,06 50,94 0,38 52,25 44 1,00 53,38 153 684
1270,0 1403,4 55,4 46,2 114,2 1271,5 1293,9 9,7 1327,2 25,4 1355,9
52” 52,00 57,38 2,25 1,82 4,69 52,06 52,94 0,38 54,25 48 1,00 55,50 160 758
1320,8 1457,5 57,2 46,2 119,1 1322,3 1344.7 9,7 1378,0 25,4 1409,7
54” 54,00 59,38 2,38 1,88 4,88 54,06 55,00 0,38 56,25 48 1,00 57,50 177 837
1371,6 1508,3 60,5 47,7 123,9 1373,1 1397,0 9,7 1428,8 25,4 1460,5
56” 56,00 62,00 2,44 1,94 5,25 56,06 57,12 0,44 58,50 40 1,12 59,88 198 959
1422,4 1574,8 62,0 49,2 133,3 1423,9 1450,8 11,2 1485,9 28,4 1521,0
58” 58,00 64,00 2,50 2 5,38 58,06 59,12 0,44 60,50 44 1,12 61,88 218 1046
1473,2 1625,6 63,5 50,7 136,6 1474,7 1501,6 11,2 1536,7 28,4 1571,8
60” 60,00 66,00 2,62 2,13 5,63 60,06 61,12 0,44 62,50 44 1,12 63,88 245 1137
1524,0 1676,4 66,5 54 142,9 1525,5 1552,4 11,2 1587,5 28,4 1622,6
75 lb/sq.in
150 lb/sq.in
300 lb/sq.in
SERIES B: WELDING NECK AND BLIND FLANGES 117
mø
aø
1,6mm
1/16”
lø 1)
Jø
371/2º
r
h 150 LB/SQ. IN.
b
1/16”
1,6mm
WELDING NECk & BLIND FLANGES
gø
kø
Dø
1/16”
1,6mm
ASME B 16.47
SERIES B
E
26” 26 30,94 1,75 1,56 3,44 26,06 26,94 0,38 28 36 0,88 29,31 63 165
660,4 785,9 44,5 39,5 87,3 661,9 684,3 9,7 711,2 22,4 744,5
28” 28,0 32,94 1,88 1,69 3,69 28,06 28,94 0,38 30 40 0,88 31,31 74 200
711,2 836,7 47,8 42,9 93,7 712,7 735,1 9,7 762,0 22,4 795,3
30” 30 34,94 2,00 1,69 3,88 30,06 31 0,38 32 44 0,88 33,31 80 226
762,0 887,5 50,8 42,9 98,5 763,5 787,4 9,7 812,8 22,4 846,1
32” 32 37,06 2,12 1,75 4,19 32,06 33,06 0,38 34 48 0,88 35,44 92 263
812,8 941,3 53,8 44,4 106,4 814,3 839,7 9,7 863,6 22,4 900,2
34” 34 39,56 2,25 1,88 4,28 34,06 35,12 0,38 36,25 40 1,00 37,69 113 320
863,6 1004,8 57,2 47,7 108,6 865,1 892,0 9,7 920,8 25,4 957,3
36” 36 41,62 2,31 2 4,56 36,06 37,19 0,38 38,25 44 1,00 39,75 129 374
914,4 1057,1 58,7 50,7 115,7 915,9 944,6 9,7 971,6 25,4 1009,7
38” 38,00 44,25 2,50 2,06 4,82 38,12 39,25 0,38 40,25 40 1,12 42,12 150 434
965,2 1124,0 63,5 52,2 122,4 968,2 997,0 9,7 1022,4 28,4 1069,8
40” 40,00 46,25 2,62 2,13 5 40,12 41,31 0,38 42,5 44 1,12 44,12 162 489
1016,0 1174,8 66,5 54 126,9 1019,0 1049,3 9,7 1079,5 28,4 1120,6
42” 42 48,25 2,69 2,25 5,19 42,12 43,38 0,44 44,5 48 1,12 46,12 184 560
1066,8 1225,6 68,3 57,1 131,8 1069,8 1101,9 11,2 1130,3 28,4 1171,4
44” 44 50,25 2,81 2,32 5,32 44,12 45,38 0,44 46,5 52 1,12 48,12 192 626
1117,6 1276,4 71,4 58,9 135,1 1120,6 1152,7 11,2 1181,1 28,4 1222,2
46” 46 52,81 2,94 2,38 5,63 46,12 47,44 0,44 48,62 40 1,25 50,56 224 709
1168,4 1341,4 74,7 60,4 142,9 1171.4 1205,0 11,2 1234,9 31,8 1284,2
48” 48 54,81 3,06 2,5 5,82 48,12 49,5 0,44 50,75 44 1,25 52,56 231 799
1219,2 1392,2 77,7 63,4 147,8 1222,2 1257,3 11,2 1289,1 31,8 1335,0
50” 50,00 56,51 3,18 2,63 6 50,12 51,50 0,44 52,75 48 1,25 54,56 263 899
1270,0 1435,4 80,8 66,7 152,3 1273,0 1308,1 11,2 1339,9 31,8 1385,8
52” 52,00 58,81 3,31 2,69 6,13 52,12 53,56 0,44 54,75 52 1,25 56,56 285 985
1320,8 1493,8 84,1 68,3 155,6 1323,8 1360,4 11,2 1390,7 31,8 1436,6
54” 54,00 61,00 3,44 2,75 6,32 54,12 55,62 0,44 56,75 56 1,25 58,75 287 1081
1371,6 1549,4 87,4 69,8 160,5 1374,6 1412,7 11,2 1441,5 31,8 1492,3
56” 56,00 63,00 3,56 2,82 6,5 56,12 57,69 0,56 58,75 60 1,25 60,75 323 1181 ASME
B 16.47
1422,4 1600,2 90,4 71,6 165 1425,4 1465,3 14,2 1492,3 31,8 1543,1
SERIES
58” 58,00 65,94 3,68 2,88 6,82 58,12 59,69 0,56 60,75 48 1,38 63,44 384 1322 B
1473,2 1674,9 93,5 73,1 173,2 1476,2 1516,1 14,2 1543,1 35,1 1611.4
75
60” 60,00 67,94 3,81 2,94 7 60,12 61,81 0,56 63,00 52 1,38 65,44 388 1430
150
1524,0 1725,7 96,8 74,6 177,7 1527,0 1570,0 14,2 1600,2 35,1 1662,2
150 lb/sq.in
300 lb/sq.in
118 DIMENSIONS SERIES B: WELDING NECK AND BLIND FLANGES
mø
aø
1,6mm
1/16”
1/16”
SERIES B
Pipe Flange dimensions Hub rai- drilling Template Approx. Approx.
Weight Weight
sed
Face
26” 26 34,12 3,50 3,44 5,63 26,19 27,62 0,56 29 32 1,38 31,62 181 404
660,4 866,6 88,9 87,3 142,9 665,2 701,5 14,2 736,6 35,1 803,1
28” 28,0 36,25 3,50 3,44 5,82 28,19 29,75 0,56 31 36 1,38 33,75 203 457
711,2 920,8 88,9 87,3 147,8 716,0 755,7 14,2 787,4 35,1 857,3
30” 30 39 3,69 3,63 6,16 30,25 32 0,56 33,25 36 1,50 36,25 268 555
762,0 990,6 93,7 92,1 156,4 768,4 812,8 14,2 844,6 38,1 920,8
32” 32 41,5 4,06 4 6,56 32,25 34 0,62 35,5 32 1,62 38,5 330 693
812,8 1054,1 103,1 101,5 166,5 819,2 863,6 15,7 901,7 41,1 977,9
34” 34 43,62 4,06 4 6,75 34,25 36,12 0,62 37,5 36 1,62 40,62 357 765
863,6 1107,9 103,1 101,5 171,4 870,0 917,4 15,7 952,5 41,1 1031,7
36” 36 46,12 4,06 4 7,06 36,25 38 0,62 39,75 32 1,75 42,88 405 858
914,4 1171,4 103,1 101,5 179,2 920,8 965,2 15,7 1009,7 44,5 1089,2
38” 38,00 48,12 4,38 4,32 7,5 38,25 40,00 0,62 41,75 36 1,75 44,88 416 1005
965,2 1222,2 111,3 109,7 190,4 971,6 1016,0 15,7 1060,5 44,5 1140,0
40” 40,00 50,12 4,56 4,5 7,75 40,25 42 0,62 43,88 40 1,75 46,88 450 1132
1016,0 1273,0 115,8 114,2 196,8 1022,4 1066,8 15,7 1114,6 44,5 1190,8
44” 44 54,5 5 4,94 8,38 44,31 46,19 0,62 48 40 1,88 51 552 1466
1117,6 1384,3 127,0 125,4 212,8 1125,5 1173,2 15,7 1219,2 47,8 1295,4
46” 46 57,5 5,12 5 8,69 46,31 48,38 0,62 50 36 2,00 53,75 650 1657
1168,4 1460,5 130,1 126,9 220,7 1176,3 1228,9 15,7 1270,0 50,8 1365,3
48” 48 59,5 5,31 5 8,75 48,31 50,31 0,62 52,25 40 2,00 55,75 731 1772
1219,2 1511,3 134,9 126,9 222,2 1227,1 1277,9 15,7 1327,2 50,8 1416,1
50” 50,00 61,50 5,50 5,38 9,19 50,31 52,38 0,62 54,25 44 2,00 57,75 760 2029
1270,0 1562,1 139,7 136,6 233,4 1277,9 1330,5 15,7 1378,0 50,8 1466,9
52” 52,00 63,50 5,68 5,56 9,5 52,31 54,44 0,62 56,25 48 2,00 59,75 800 2230
1320,8 1612,9 144,3 141,1 241,2 1328,7 1382,8 15,7 1428,8 50,8 1517,7
54” 54,00 65,88 5,88 5,32 9,38 54,31 56,50 0,62 58,25 48 2,00 62,12 898 2310
1371,6 1673,4 149,4 135,1 238,2 1379,5 1435,1 15,7 1479,6 50,8 1577,8
56” 56,00 69,50 6,18 6 10,5 56.31 58,81 0,69 60,50 36 2,38 65,00 1143 2891
1422,4 1765.3 157,0 152,3 266,6 1430,3 1493,8 17,5 1536,7 60,5 1651,0
58” 58,00 71,94 6,38 6 10,75 58,31 60,94 0,69 62,75 40 2,38 67,44 1217 3093
1473,2 1827,3 162,1 152,3 273 1481,1 1547,9 17,5 1593,9 60,5 1713,0
60” 60,00 73,94 6,56 5,88 10,63 60,31 62,94 0,69 65,00 40 2,38 69,44 1311 3213
1524,0 1878,1 166.6 149,3 269,9 1531,9 1598,7 17.5 1651,0 60.5 1763.8
400 lb/sq.in
SERIES B: WELDING NECK AND BLIND FLANGES 119
mø
aø
1,6mm
1/16”
gø
1/16”
1,6mm
WELDING NECk & BLIND FLANGES
kø
Dø
1/16”
6,4mm
ASME B 16.47
SERIES B
E
26” 26 33,5 3,5 3,5 5,88 26 27,12 0.44 28 28 1,5 30,75 176 398
660.4 850,9 88,9 88,9 149.4 660.4 688,8 11.2 711,2 38,1 781,1
28” 28,0 36 3,75 3,75 6,25 28 29,12 0,5 30 24 1,62 33 216 492
711,2 914.4 95,3 95,3 158,8 711,2 739,6 12,7 762,0 41,1 838,2
30” 30 38,25 4 4 6,99 30 31,25 0,5 32,25 28 1,62 35,25 253 592
762,0 971,6 101,6 101,6 177,5 762,0 793,8 12,7 819,2 41,1 895,4
32” 32 40,75 4,25 4,25 7,06 32 33,25 0,5 34,38 28 1,75 37,5 300 714
812,8 1035,1 108,0 108,0 179,3 812,8 844,6 12,7 873,3 44,5 952,5
34” 34 42,75 4,38 4,38 7,38 34 35,38 0,56 36,5 32 1,75 39,5 327 810
863,6 1085,9 111,3 111,3 187,5 863,6 898,7 14,2 927,1 44,5 1003,3
36” 36 45,5 4,69 4,69 7,88 36 37,5 0,56 38,62 28 1,88 42 402 982
914.4 1155,7 119,1 119,1 200,2 914.4 952,5 14,2 980,9 47,8 1066,8
ASME
B 16.47
SERIES
B
300
400
120 DIMENSIONS SERIES B: WELDING NECK AND BLIND FLANGES
ASME B 16.47
SERIES B
Pipe Flange dimensions Hub rai- drilling Template Approx. Approx.
sed Weight Weight
Face
26” 26 35 4,38 4,38 7,12 26 27,5 0,5 28,62 28 1.75 31,75 267 534
660,4 889,0 111,3 111,3 180,8 660,4 698,5 12,7 726,9 44,5 806,5
28” 28,0 37,5 4,56 4,56 7,5 28 29,62 0,5 30,88 28 1,88 34 326 637
711,2 952,5 115,8 115,8 190,5 711,2 752,3 12,7 784,4 47,8 863,6
30” 30 49,25 5 4,94 8,06 30 31,75 0,5 33,12 28 2,00 36,5 402 793
762,0 1022,4 127,0 125,5 204,7 762,0 806,5 12,7 841,2 50,8 927,1
32” 32 42,75 5,31 5,12 8,5 32 33,88 0,5 35,25 28 2,12 38,75 462 925
812,8 1085,9 134,9 130,0 215,9 812,8 860,6 12,7 895,4 53,8 984,3
34” 34 45.75 5,68 5,56 9,19 34 36 0,56 37,5 24 2,38 41,5 582 1150
863,6 1162,1 144,3 141,2 233,4 863,6 914,4 14,2 952,5 60,S 1054,1
36” 36 47,75 5,94 5,75 9,56 36 38,12 0,56 39,75 28 2,38 43,5 627 1290
914,4 1212,9 150,9 146,1 242,8 914,4 968,2 14,2 1009,7 60,5 1104,9
SERIES B: WELDING NECK AND BLIND FLANGES 121
ASME B 16.47
SERIES B
Pipe Flange dimensions Hub rai- drilling Template Approx. Approx.
Weight Weight
sed
Face
26” 26 40,25 6,06 5,31 10,19 26 29,25 0,44 30 20 2,62 35,5 564 993
660.4 1022,4 153,9 134,9 258,8 660,4 743,0 11,2 762,0 66,5 901,7
28” 28,0 43,5 6,56 5,81 10,88 28 31,38 0,5 32,25 20 2,88 38,25 706 1256
711,2 1104,9 166,6 147,6 276,4 711,2 797,1 12,7 819,2 73,2 971,6
30” 30 46.5 6,93 6,12 11,38 30 33,5 0,5 34,5 20 3,12 40,75 833 1516
762.0 1181,1 176,0 155,4 289,1 762,0 850,9 12,7 876,3 79,2 1035,1
32” 32 48,75 7,31 6,31 11,94 32 35,75 0,5 36,5 20 3,12 43 919 1757
812,8 1238,3 185,7 160,3 303,3 812,8 908,1 12.7 927,1 79,2 1092,2
34” 34 51,75 7,68 6,75 12,56 34 37,88 0,56 39 20 3,38 45,5 1105 2080
863.6 1314,5 195,1 171,5 319,0 863,6 962,2 14,2 990,6 85,9 1155,7
36” 36 53 7,94 6,81 12,81 36 40 0,56 40,5 24 3,12 47,25 1124 2256
914,4 1346,2 201,7 173,0 325,4 914,4 1016,0 14,2 1028,7 79,2 1200,2
ASME
B 16.47
SERIES
B
600
900
122
Ulmz
123
APPENDIX
124 DIMENSIONS APPENDIX
APPENDIX 125
ASME B 16.5
Nominal Minimum Bore Nominal Minimum Bore Nommal m Minimum Bore
Pipe or Tapping of Pipe or Tapping of Pipe or Tapping of
Size Hub Flange Size Hub Flange Size m Hub Flange
h m
1 DN DN DN
m
1 h1
h
1
3 1/2” 1 1/2”
1” 1/2” 4” 1 1/2” h 14” 3 1/2”
1 1/4” 1/2” 5” 1 1/2” 16” 4”
1 1/2” 1/2” 6” 2 1/2” 18” 4”
2” 1” 8” 3” 20” 4”
2 1/2” 1 1/4” 10” 3 1/3”
3” 1 1/4” 12” 3 1/3” 24” 4”
m
m
h m
1
h m
1
1
h
1
h
h m
1
h m
1
dimensional references
h m
1
Outside
h diameter, Thickness,mFacing and drilling Template:
1
All these dimensions correspond exactly with those of the full size flange of the nominal pipe size from which the reduction is being made.
As in the case of regular full size flanges. the 1/16”. Raised Face on 150 lb. and 300 lb. reducing flanges is included in thickness. The 1/4”Raised Face on flanges in the 400 lb. and
higher Pressure Standards is not included in thick-nesses. Any other facing can be furnished.
Bore:
Reducing Slip-on flanges are bored to the same diameters as full size flanges of the size (and Pressure Standard) to which the reduction is made. Reducing Threaded flanges in the
150 lb. Standard do not require a counterbore. On 300 lb. and higher Pressure Standards depth of counterbore is 1/4” for tappings 2” and smaller and 3/8.” for tappings 2 -1/2” and
larger. Counter-bore diameters are the same as for full size flanges of identical tapping.
Minimum Bores:
The smallest sizes to which hubbed flanges can be bored are listed in the above table. For reductions to sizes smaller than listed. BLIND FLANGES are furnished bored or tapped to
required nominal pipe size.
APPENDIX
126 DIMENSIONS APPENDIX
APPENDIX 127
300-2500 LB/SQ.IN
ORIFICE FLANGES
The minimum flange thickness is 38.1 mm. The overall length of hub increases in the same way as the flange thickness.
Tolerances on all dimensions shall be as shown in ASME/ANSI B 16.5 except for:
2. Inside diameter:
Bore diameter tolerance (welding neck flanges only) is ± 0,5 % of nominal value.
Orifice Flanges
1” - 2 1/2 “ 6,4 mm
3” 9,5mm
4” and larger 12,7 mm
The distance x from the centre line of the hole to the face is for RF-Flanges 23.8 mm and for all RT J-
Flanges 19.1 mm and shall be measured at the bore. For depth of groove 11.1 mm or larger there are due to insufficient material between
groove and pressure tap hole modifications of diameter of hole or type of hole necessary.
Each Flange shall have a machine bolt mounted in a hole drilled on the flange centre line at 900 from the pressure taps, for use as jackscrew.
Machine bolt shall be regular with one heavy hex nut.
The depth of the slot shall admit the nut so that there is no interference with the joining of the flan-ges when bolted together without orifice
plate.
APPENDIX
MATERIALS
CHEMICAL rEqUIrEMENTs TENSILE YIELD HARD- IMPACT HEAT
STRENGTH STRENGTH NESS TEST TREATMENT
C Mn Si P S Cr Ni Mo Nb V Cu Al Ti Other elem. KSI N/mm KSI N/mm HB ºC Joules
CArBON sTEEL
128 DIMENSIONS APPENDIX
A105N 0,35 0,60-1,35 0,10-0,35 0,035 0,040 0,30 0,40 0,12 0,08 0,40 70 485 36 250 137-187 N
C21 0,18-0,23 0,8-1,35 0,15-0,35 0,035 0,030 0,30 0,40 0,12 0,02 0,03 0,40 70-91 485-630 36 250 137-187 20 31 N
BF48N 0,23 0,70-1,35 0,15-0,30 0,035 0,035 1,45 67-86 470-600 37 255 137-187 N
CSAGR248CATI 0,35 1,35 0,35 0,050 0,060 0,30 0,40 0,12 0,05 0,10 0,40 60 414 358 248 137-187 N
ESP.ULMA 0,18-0,21 0,80-1,10 0,15-0,30 0,020 0,010 0,30 0,40 0,12 0,02 0,03 0,40 0,020-0,050 N:0,012 70 485 36 250 137-187 20 37 N
N = NORMALIZED
Q = QUENCHED
T = TEMPERED
A = ANNEALED
APPENDIX
ULMA Piping - Headquarters
Registered Name: ULMA Forja, S.Coop.
Bo Zubillaga, 3 - P.O. Box 14
20560 Oñati
Gipuzkoa - Spain
www.ulmapiping.com
Ed.01 _ 2009