Professional Documents
Culture Documents
Calibracion de Monitores Eizo PDF
Calibracion de Monitores Eizo PDF
Calibracion de Monitores Eizo PDF
Easy-to-understand
How-to-Use Guide
EIZO’s ColorEdge color management monitor
supports a wide variety of creative work. This
guidebook provides an introduction to calibration
using ColorNavigator, EIZO's dedicated calibra-
tion software.
If you use ColorNavigator 6
with your ColorEdge monitor,
you can achieve accurate display
Retouching
tailored to your purpose. digital
photos
Printing
Creating
Web
content
Viewing Creating
microbes videos
Retouch Completed
United States
of America Japan
Incorrect display on an
uncalibrated monitor
It takes time and effort and costs money to correct printed material
when the screen output differs from the actual print.
2 3
4
4 STEPS First master the basics STEP
button.
PC
Confirm in advance
Before launching the program, Upstream
make sure that your monitor
and PC are connected by a When the sensor is placed on the screen, click on the
Downstream
USB cable. Proceed button.
- Tilting the monitor upward fixes the sensor in place and makes color
measurements easier.
- After turning on the monitor, it is necessary to wait 60 minutes while the
adjustment results from the external calibration sensor are saved to the built-in
correction sensor.
STEP
2 STEP
Select the adjustment target that matches
how you use your monitor 4 Automatic calibration
Three preset adjustment targets are provided. Each of them has appropriate values preset for the intended use of the
monitor.
For the CG series
Select your preferred target value and click on the Adjust ... button.
For digital photo viewing
Calibration completed.
and retouching
Target values –
Brightness: 100 cd/m2
Color temperature: 5500 K
The built-in calibration sensor
Gamma value: 2.2
adjusts the monitor.
All you need to do is follow the steps – a simple job that takes only a few minutes.
Now you know you can rely on the monitor for your work.
4 5
4
4 STEPS Practical application
STEP
An additional steps for more Compare the colors of your printed output
with the colors displayed on the monitor
3 Do this only when necessary
The
2 While comparing your printed output with the display on the STEP
Calibration completed.
The built-in calibration sensor
adjusts the monitor.
Printing Monitor
For the CX and CS series
Adjust the screen color tone (whiteness) until it approxi-
mates the appearance of the printed output. If the screen
output seems blue, move the pointer away from the blue When the adjustment Create a new target The new
spectrum and toward the red end of the spectrum to results are displayed, name and click on the adjustment targets
remove excess blue. The external The built-in
click on the Next > button. Finish button. are added to the
calibration sensor correction sensor*.
adjusts the monitor. saves the adjustment target list.
values from that sensor.
*Only available with the
CX Series and CS230.
PROFESSIONAL Practical application for advanced users Adjustment targets can be added Select the target creation method To perform “Enter manually”
Calibration using the built-in The same sensor automati- The built-in correction sensor* The built-in correction sensor
sensor cally performs regular saves the calibration results automatically adjusts
calibrations and maintains of the external sensor. brightness and white point at
the display. *Only available with the regular intervals and main-
CX Series and CS230.
tains the display.
Performance settings Performance settings
Select SelfCalibration schedule from the Check “Enable SelfCalibration” and Select SelfCalibration settings from “Advanced”. Check “Enable SelfCorrection”
"Advanced" drop-down menu. you can set the timing in months, and you can set the timing in
weeks or elapsed time of use. elapsed time of use.