Professional Documents
Culture Documents
Earthquake Design Loads
Earthquake Design Loads
Earthquake Design Loads
FRAME 1
FRAME B COMPUTATIONS
DEAD LOAD (kN/m)
BEAM SLAB PARTITION TOTAL
BEAM NO.
BEAM BEAM CROSS SEC. AREA UNIT WT. LEFT RIGHT UNIT WT. DEAD
TOTAL TOTAL THICKNESS HEIGHT TOTAL
TYPE LENGTH WIDTH CONCRETE THICKNESS TRIB. THICKNESS TRIB. PARTITION LOAD
7, 8 1 0.3 0.2 24 1.44 0.15 1.5 24 0.15 1.5 24 10.8 0.2 3 22 13.2 25.44
9 1 0.3 0.2 24 1.44 0.15 1.5 24 0.15 1.5 24 10.8 0.2 1 22 4.4 16.64
FRAME B
Date: 5/5/2019 Page
EARTHQUAKE DESIGN LOADS
Submitted by MONTERMOSO, L. K.
1 of 7
Project: THREE-STOREY APARTMENT BUILDING Submitted to ENGR. ERWIN MIANO
National Structural Code of the Philippines (2015)
DESIGN REFERENCE:
Section 208.5.2 Static Force Procedure
Frame 1
Floor Height Weight OCCUPANCY CATEGORY
Level (m) (kN) Type IV Standard Occupancy Structures
1 3 360.36
2 3 314.28 SOIL PROFILE TYPE
3 3 151.56 Sc Very Dense Soil & Soft Rock
TOTAL: 826.2
SEIZMIC ZONE
ZONE 2
Closest Distance
To Known
Seismic Source
3 SEISMIC SOURCE TYPE
(km) C M < 6.5
M = Maximum Moment Magnitude
T=𝑪_𝒕 𝒉_𝒏^(𝟑/𝟒)
= 0.3798 sec
�=(𝒄_� 𝑰)/𝑹𝑻 �
= #DIV/0! kN
The total design base shear need not exceed the following:
The total base shear shall not be less than the following:
�=𝟎.𝟏𝟏𝐂𝐚𝐈� = 21.81168 kN
In addition, for the Seismic Zone 4, the total base shear shall also be less than the following:
fn
f₂
f₁
USE: Ft = 0.0000 kN
The remaining portion of the base shear shall be distributed over the height of the structure, including
level n, according to the following equation:
Sa Hard Rock
Sb Rock
Sc Very Dense Soil & Soft Rock
Sd Stiff Soil and Soft Rock
Se Stiff Soil Profile
Sf (Soil Requiring Site-Specific Eval)
ZONE 2 0.2
ZONE 4 0.4
A 7.0 ≤ M ≤ 8.4
B 6.5 ≤ M < 7.0
C M < 6.5
ZONE 2 ZONE 4
Sa 0.16 0
Sb 0.2 0
Sc 0.24 0
Sd 0.28 0
Se 0.34 0
Sf Footnote 1 of Table 208-8 Footnote 1 of Table 208-8
ZONE 2 ZONE 4
0.24 0
ZONE 2 ZONE 4
Sa 0.16 0
Sb 0.2 0
Sc 0.24 0
Sd 0.28 0
Se 0.34 0
Sf Footnote 1 of Table 208-8 Footnote 1 of Table 208-8
owing equation:
ZONE 2 ZONE 4
0.24 0
#DIV/0!
#DIV/0!
21.8117
#DIV/0!
he following:
r at the top, shall be
0.6041
5.6801
0
he structure, including
steel moment-resisting frames 0.0853
reinforced concrete moment-resisting frames and eccentrically braced 0.0731
all other buildings 0.0488