Professional Documents
Culture Documents
B E-VI Sem-Curriculum - Syllabus-2016 Batch PDF
B E-VI Sem-Curriculum - Syllabus-2016 Batch PDF
B E-VI Sem-Curriculum - Syllabus-2016 Batch PDF
Chairperson, Civil Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.R.Malathy Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Civil, Sixth Semester BE Civil Students and Staff, COE
(Page 1of 2)
30.11.2018 Regulations-2015R
S. No Course Code Course Title Lecture Tutorial Practical Credit
Practical
7 U15CE604R Civil Engineering Software Application Laboratory 0 0 4 2
8 U15CE605R Environmental Engineering Laboratory 0 0 4 2
9 U15GE601AR Professional Development Skills 0 0 2 1
Total Credits 23
Approved By
Chairperson, Civil Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.R.Malathy Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Civil, Sixth Semester BE Civil Students and Staff, COE
(Page 2of 2)
30.11.2018 Regulations-2015R
L T P C
U15CE601R STRUCTURAL ANALYSIS-II
2 2 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
Basic concepts-Stiffness, distribution and carry over factors-Fixed end moments- Application to statically indeterminate beams
and frames (with and without sway): Deformed shape, shear force and bending moment diagram (unknowns restricted to three
only).
Basic concepts of flexibility method-Formulation of structure flexibility matrix- Application to statically indeterminate beams,
rigid and pin jointed frames (redundancy restricted to two only).
Basic concepts of stiffness method- Formulation of structure stiffness matrix- Application to statically indeterminate beams,
Rigid and pin jointed frames (unknowns restricted to two only).
Introduction - Analysis of multistory frames for gravity and lateral loads by approximate methods- Substitute frame-Portal and
cantilever methods.
1. Vaidyanathan R. and Perumal, P’ “Comprehensive structural Analysis-Vol. I & II”, Laxmi Publications, New Delhi, 2003.
2. Negi L.S. and Jangid R.S, “Structural Analysis”, Tata McGraw Hill Publications, New Delhi, 2003.
REFERENCES:
1. Punmia B.C, “Theory of Structures”, Standard Book House, New Delhi, 2000.
2. BhavaiKatti S.S, “Structural Analysis-Vol. 1 & Vol. 2”, Vikas Publishing Pvt Ltd, New Delhi, 2008.
3. Thandavamoorthy T.S, “Structural Analysis”, Oxford university press, New Delhi. 2011.
4. Pandit G.S, and Gupta S. P, “Structural Analysis a Matrix Approach”, Tata McGraw Hill Publications, New Delhi, 2008.
5. Senthil S, Panneerdhass, “ Finite Element Analysis”, Lakshmi Publication, Chennai,2017.
30.11.2018 Regulations-2015R
L T P C
U15CE602R DESIGN OF STEEL STRUCTURES (Limit State Design)
2 2 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Apply the IS code practice for the design of steel structural elements, analyses and design tension members.
2. Design the bolted and welded connection for both axial and eccentric forces.
3. Design compression members and base plates.
4. Design various types of flexural members.
5. Design various members of roof truss.
Review of concepts of plastic analysis. Structural steel sections and products, grades and mechanical properties of steel,
advantages of steel as structural material, types of steel structures. Introduction to Limit State Method of design of steel
structures - failure criteria for steel, limit states of strength and serviceability, structural stability, durability, corrosion, fatigue
and fire resistance. Loads and load combinations, characteristic strength and loads, partial safety factors. Tension members-
Various forms-Modes of failure-Analysis and design of axially loaded tension members.
Basic concepts of connection-Bolted connection: Types of bolts-modes of failures; Joints subjected to direct and eccentric load.
Welded connection: Types and strength of welds- Butt and fillet welds -Joints subjected to direct load and eccentric load.
Design of axially loaded compression members: Section classifications - Effective length - Slenderness ratio- Classification of
column-Modes of failure; Design of axially loaded: Simple section-built-up sections - Design of lacings and battens- Design of
single and double angle strut-Continuous and discontinuous strut. Design of column bases: Types - Slab base.
Beams: Types of steel beams- Modes of failure -Design of laterally supported and unsupported beam: Rolled beam- built-up
beams- Design for strength and serviceability- Web yielding-Web crippling-Bearing stiffeners. Welded plate girder:
Components-Stiffener-Analysis and design using IS 800-2007of welded plate girder. Design principles of gantry girder.
Design of industrial building: Roofing - cladding and wall material – Structural components and framing- Types of roof trusses
- components - Loads and Its combination-Wind load estimation for different type of zones-Design of purlins.
REFERENCES:
1. Bhavikatti S.S, “Design of Steel Structures”, I.K. International Publishing House Pvt. Ltd, New Delhi, 2010
2. Negi L.S, “Design of Steel Structures”, Tata McGraw Hill Publishing Pvt Ltd, New Delhi, 2007.
3. Jayagopal L.S, and Tensing, “Design of Steel Structures” Vikas Publishing House Pvt. Ltd, India, 2016.
4. Gambhir M.L, “Fundamentals of Structural Steel Design”, McGraw Hill Education India Pvt. Ltd, 2013
5. Shiyekar M.R, “Limit State Design in Structural Steel”, Prentice Hall of India Pvt. Ltd, 2013.
30.11.2018 Regulations-2015R
L T P C
U15CE603R FOUNDATION ENGINEERING
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Conduct sub surface investigation and select foundation based on soil condition.
2. Estimate the bearing capacity of soil based on shear and settlement criteria.
3. Analyze the proportion of various shallow foundations.
4. Calculate the load carrying capacity of piles.
5. Determine the earth pressure of retaining wall.
Types of piles and their function –Load carrying capacity of piles -static formula-dynamic formulae (Engineering news and
Hileys)- Load carrying capacity from insitu tests (SPT and SCPT)-Negative skin friction- Group capacity by different methods
(Feld’s rule, Converse-Labarre formula)-Settlement of pile and pile groups- pile load test (routine test only)-Under reamed
piles.
Plastic equilibrium in soils-Active and passive states-Rankine’s theory- Coulomb’s wedge theory-Condition for critical failure
plane-Earth pressure on retaining walls of simple configurations-Rebhann’s and Culmann’s graphical method-Pressure on the
wall due to line load-Stability analysis of retaining walls.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Punmia B.C, “Soil Mechanics and Foundations”, Laximi Publications Pvt. Ltd, New Delhi, 16th edition, 2017.
2. Gopal Ranjan and Rao A.S.R, “Basic and Applied Soil Mechanics”, New Age International Publishers, New Delhi, 2016.
REFERENCES:
1. Venkatramaiah, C, “Geotechnical Engineering”, New Age International Publishers, New Delhi, 2017.
2. Murthy V.N.S, “Textbook of Soil Mechanics and Foundation Engineering; Geotechnical Engineering Series”, CBS
Publishers Distribution Ltd, New Delhi. 2016.
3. Braja m.das, principles of foundation Engineering, Thomson Asia pvt.ltd, Singapore, 2016.
4. Shenbaga R kaniraj, Design aids in Soil mechanics and Foundation, Tata Mc Graw –Hill Education-2011.
30.11.2018 Regulations-2015R
L T P C
U15CE907R DESIGN OF RC STRUCTURES
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
Design and detailing of continuous RCC beams- IS Code coefficients for continuous beams. Design and detailing of continuous
RC slabs with various support conditions using IS Code coefficients.
Retaining wall-Types-General design requirements-Check against sliding and overturning-Provision of shear key-Design of
cantilever and counter fort retaining walls.
Water tank: Classification- Design requirements of materials-Design considerations; Design of circular and rectangular water
tank: Resting on ground and underground water tank. Design concepts of elevated water tank.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Krishna Raju N,“ Design of Reinforced Concrete Structures”, CBS Publishers & Distributors, New Delhi2010.
2. Ashok Kumar Jain, “Reinforced Concrete Limit State Design”, Nem Chand Brothers, 2015.
REFERENCES:
1. VargheseP.C,“Advanced Reinforced Concrete Design”, Prentice Hall of India Pvt. Ltd, New Delhi 2010.
2. Gambhir M.L,“Fundamentals of Reinforced Concrete Design”, Prentice Hall of India Pvt. Ltd, New Delhi 2008.
3. UnnikrishnaPillai S,DevdasMenon, “Reinforced Concrete Design”, Tata McGraw-Hill Publishing Company Ltd,New
Delhi 2016.
4. SinhaS.N,“Reinforced Concrete Design”, Tata McGraw-Hill Publishing Company Ltd, New Delhi 2014.
30.11.2018 Regulations-2015R
L T P C
U15CE909R MUNICIPAL SOLID WASTE MANAGEMENT
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
Sources and types of solid wastes - Quantity - factors affecting generation of solid wastes; characteristics - methods of sampling and
characterization; Effects of improper disposal of solid wastes - public health effects. Principle of solid waste management - social and
economic aspects; Public awareness; Role of NGOs; Solid waste management rules 2016 - case studies.
On-site storage methods - Materials used for containers - on-site segregation of solid wastes - public health & economic aspects of
storage - options under Indian conditions - Critical evaluation of options.
Methods of Residential and commercial waste collection - Collection vehicles - Manpower- collection routes - Analysis of collection
systems; Transfer stations - Selection of location, operation & maintenance; options under Indian conditions - Field problems- solving.
Processing techniques and equipment; Resource recovery from solid wastes - Composting, incineration, Pyrolysis - Options under
Indian conditions - Case studies.
UNIT-V DISPOSAL 9
Dumping of solid waste; Sanitary landfills - Site selection, design and operation of sanitary landfills -Leachate collection and
treatment.
TOTAL: 45 PERIODS
TEXT BOOKS:
REFERENCES:
1. Manual on Municipal Solid Waste Management, CPHEEO, Ministry of Urban Development, Government of India, New Delhi,
2000.
2. Landreth R.E, and P.A and Rebers, “Municipal Solid Wastes -problems and Solutions”, Lewis Publishers, 2000.
3 Bhide A.D, and Sundaresan, B.B, “Solid Waste Management in Developing Countries”, INSDOC, 2003.
4. Ramachandra T.V, “Management of Municipal Solid Waste”, TERI press, New Delhi, 2009.
30.11.2018 Regulations-2015R
L T P C
U15CE911R REPAIR AND REHABILITATION OF STRUCTURES
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Describe the maintenance and repair strategies.
2. Identify the various patterns of cracks and moisture movement internally and externally.
3. Suggest the suitable repair materials for different deterioration.
4. Recommend right techniques to eliminate distressing in concrete and steel structures.
5. Suggest suitable repair techniques for different deterioration.
Introduction-Facts and importance of maintenance-Various aspects of inspection-Assessment procedure for evaluating damaged
structure-Causes of deterioration-Diagnosis of causes -Flow charts for diagnosis.
Building cracks: Causes -Diagnosis -Remedial measures -Thermal and Shrinkage cracks -Unequal loading -Vegetation and trees
-Chemical action -Foundation movements. Moisture penetration: Sources off dampness -Moisture movement from ground -
Reasons for ineffective damp proofing course -Roof leakage -Pitched roofs-Leakage of concrete slabs-Dampness in solid walls -
Condensation -Hygroscopic salts.
Concrete structures: Methods of repair-Repairing-Spalling -Disintegration -Repairing of concrete floors and pavements. Steel
structures: Types and causes for deterioration -Preventive measures -Repair procedure -Brittle fracture -Lamellar tearing -
Defects in welded joints -Mechanism of corrosion -Design to protect against corrosion -Design and fabrication errors -Distress
during erection.
General principles -Relieving loads -Strengthening super structures: To overcome low member strength and deflection: Plating -
Post stressing -Jacketing -Bonded overlays - Reinforcement addition- Ferro cement overlay; Cracking and leakage: Vacuum
concrete-Gunite-Shotcrete-Epoxy injection-Mortar repair for cracks; Strengthening substructures : Shoring-Underpinning;
Protection methods of corrosion: Corrosion inhibitors-Corrosion resistant steel coating -Cathodic protection; Demolition
techniques - Engineered demolition methods-Case studies.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Guha P.K, “Maintenance and Repairs of Buildings”, New Central Book Agency Pvt. Ltd, Calcutta, 2011.
2. Vidivelli B, “Rehabilitation of Concrete Structures”, Standard Publishers Distributors, New Delhi, 2015.
REFERENCES:
1. Gambhir M.L, “Concrete Technology”, Tata McGraw Hill, 2012.
2 Neville A.M., Properties of Concrete, Fifth edition, Pearson Education Ltd.
2. Ravishankar.K, Krishnamoorthy.T.S, “Structural Health Monitoring, Repair and Rehabilitation of Concrete Structures”, Allied
Publishers, 2004.
3. Denison Campbell, Allen and Harold Roper, “Concrete Structures, Materials, Maintenance and Repair”, Longman Scientific and
Technical UK, 1991.
4. “Handbook on Repair and Rehabilitation of RCC Buildings” Published by Director General (Works), Central Public Works
Department, Government of India, Nirman Bhawan, 2002.
30.11.2018 Regulations-2015R
L T P C
U15CE912R BUILDING SERVICES AND SAFETY REGULATIONS
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Describe the basics of electrical systems in buildings
2. Explain the principles of illumination and design of these systems
3. Describe the basics of thermodynamics, refrigeration principles and air conditioning systems
4. Discuss the fire safety regulations and installation of fire safety equipments and systems
5. Explain the water supply and sewerage systems for buildings
Thermodynamics- Heat- Temperature, measurement transfer- Change of state- Sensible heat- Latent heat of fusion, evaporation,
sublimation- saturation temperature- Super heated vapour- Subcooled liquid- Pressure temperature relationship for liquids-
Refrigerants- Vapour compression cycle- Compressors- Evaporators- Refrigerant control devices- Electric motors- Starters- Air
handling units- Cooling towers- Window type and packaged air-conditioners- Chilled water plant- Fan coil systems- Water
piping- Cooling load- Air conditioning systems for different types of buildings- Protection against fire to be caused by A.C.
Systems
30.11.2018 Regulations-2015R
L T P C
U15CE913R ENVIRONMENTAL IMPACT ASSESSMENT
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
UNIT-I INTRODUCTION
9
Parameters of Environmental Impact Assessment (EIA) - Environmental Impact Statement (EIS)-EIA capability and
limitations-Legal provisions on EIA - Impact of development projects under Civil Engineering on environment.
UNIT-II METHODOLOGIES
9
Assessment of Impact on land, water and air, noise, social, cultural flora and fauna; Mathematical models; public participation-
Rapid EIA.
Plan for mitigation of adverse impact on environment-Options for mitigation of impact on water, air and land, flora and fauna;
Addressing the issues related to the Project affected people-ISO 14000.
Procedure for Environmental clearance-Flow chart-Environmental guidance for Thermal power plants-Mining projects-River
valley development projects-Legislation and institutional support-International Co-operation-Guidance for industrial licensing -
Case studies.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Canter R.L, “Environmental Impact Assessment”, McGraw-Hill Inc, New York, 1996.
2. Shukla S.K, and Srivastava P.R, “Concepts in Environmental Impact Analysis”, KK Publications, New Delhi, 2009.
REFERENCES:
1. John G. Rau, and David C Hooten (Ed), “Environmental Impact Analysis Handbook”, McGraw-Hill Book Company, New
York, 2000.
2. Judith Petts, “Handbook of Environmental Impact Assessment Vol. I and II”, Blackwell Science, 2002.
30.11.2018 Regulations-2015R
L T P C
U15CE915R PREFABRICATED STRUCTURES
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
UNIT-I INTRODUCTION 9
Need for prefabrication - Principles - Materials - Modular co-ordination - Standardization - Systems Production - Transportation
- Erection Disuniting of Structures.
Handling and erection stresses - Application of pre stressing of roof members-Floor systems - Two way load bearing slabs -
Wall panels.
Dimensioning and detailing of joints for different structural connections-Construction joints and expansion joints.
Production - Transportation and erection - Organizing of production - Storing and erection equipment - Shuttering and mould
design - Dimensional tolerances, erection of R.C. structures -Total prefabricated buildings.
Prefabricated units for Industrial structures, Multi-storied buildings and water tanks etc., Application of pre stressed concrete in
prefabrication.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Hubert Bachmann, Alfred Steinle, “Precast Concrete Structures”, Ernst and Sohn GMBH & Co., K.G., 2011.
2. “Structural design manual”, Precast concrete connection details, Society for the studies in the use of precast concrete,
Netherland BetorVerlag, 2009.
REFERENCES:
1. Lewicki B, “Building with Large Prefabricates”, Elsevier Publishing Company, Amsterdam / London / New York, 1966.
2. Levi M, (2000), Precast concrete materials, Manufacture properties and usage, Applied Science Publishers, London.
3. Kim S. Elliott, “Precast Concrete Structures” Butter-Heinemann, 2002.
4. LassloMokk, “Prefabricated Concrete for Industrial and Public Sectors, AkademiaiKiado”, Budapest, 1964.
30.11.2018 Regulations-2015R
L T P C
U15CE916R SMART STRUCTURES AND SMART MATERIALS
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
UNIT-I INTRODUCTION 9
Introduction to smart materials and Structures - Smart-Bridge- Instrumented structures functions and response - Sensing
systems - Self diagnosis - Signal processing consideration - Actuation systems and effectors.
Strain Measuring Techniques using Electrical strain .gauges, Types - Resistance- Capacitance - Inductance - Wheatstone
bridges - Pressure transducers - Load cells - Temperature compensation - Strain Rosettes-Field applications.
UNIT-III SENSORS 9
Sensing technology - Types of sensors - Physical measurement using Piezo electric strain measurement - LVDT - Fiber optic
techniques . chemical and bio-chemical sensing in structural assessment - Absorptive chemical sensors - Spectroscopes - Fibre
optic chemical sensing systems and distributed measurement- Field applications.
Actuator techniques - Actuator and actuator materials - Piezoelectric and electrostrictive material - Magneto structure material -
shape memory alloys - Electro rheological fluids- Electromagnetic actuation - Role of actuators and actuator materials -
displacement actuators, force actuators, power actuators, vibration dampers - Field applications.
Data acquisition and processing - Signal processing and control for smart structures - Sensors as geometrical processors - Signal
processing - Signal-Conditioning devices; Constant voltage, constant current and pulse drive methods; structural dynamics and
identification techniques - Control system - Linear and non-linear , passive, semi-active and active control, feedback and feed
forward control strategies - Field applications.
TOTAL: 45 PERIODS
TEXT BOOKS:
REFERENCES:
30.11.2018 Regulations-2015R
L T P C
U15CE604R CIVIL ENGINEERING SOFTWARE APPLICATION LABORATORY
0 0 4 2
COURSE OUTCOMES (On completion of the course, the students will be able to):
COURSE CONTENTS
Analysis of structural member using Standard Software Package: Analysis of 2D beams, columns, slab and footing;
Analysis of 2D and 3D frames- Analysis of single and two storey building -Roof trusses.
Development of Program using Excel (RCC and Steel) : Design of Flexural members-Beams and slabs-Design of
compression members-Column-Design of isolated footing-Design of staircase-Design of roof trusses-Concrete mix design.
Detailing of structural element using Standard Drafting Package: Detailing of reinforced concrete beams-Detailing of
reinforced concrete slabs-Detailing of column-Detailing of isolated footing-Detailing of staircase-Detailing of roof trusses.
TOTAL: 60 PERIODS
30.11.2018 Regulations-2015R
L T P C
U15CE605R ENVIRONMENTAL ENGINEERING LABORATORY
0 0 4 2
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Test the water and wastewater and their different characteristics as per standards
2. Recommend the degree of treatment required for the water and wastewater.
3. Apply the technical concepts and ways to solve engineering problems by conducting experiments.
COURSE CONTENTS
1. Sampling and preservation methods and significance of characterization of water and waste water.
2. Determination of – pH, turbidity and Hardness
3. Determination of iron & fluoride
4. Determination of residual chlorine
5. Determination of Chlorides
6. Determination of Ammonia Nitrogen
7. Determination of Sulphate
8. Determination of Optimum Coagulant Dosage
9. Determination of available Chlorine in Bleaching powder
10. Determination of dissolved oxygen
11. Determination of suspended, volatile and fixed solids
12. B.O.D. test
13. C.O.D. test
14. Introduction to Bacteriological Analysis (Demonstration only)
TOTAL: 60 PERIODS
30.11.2018 Regulations-2015R
U15GE601AR:Professional Development
Semester –VI Skills L T P C Marks
0 0 2 1 100
(Only for Civil)
Course Outcomes
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Mechanical Engineering
S. No Course Code Course Title Lecture Tutorial Practical Credit
Theory
1 U15ME601R Finite Element Method 3 0 0 3
2 U15ME602R Turbo machines 3 0 0 3
3 U15ME603R Design of Transmission System 3 0 0 3
4 U15ME604R Metrology and Measurements 3 0 0 3
5 *Professional Elective 3 0 0 3
6 **Open Elective 3 0 0 3
Practical
7 U15ME605R Computer Aided Analysis Laboratory 0 0 4 2
8 U15ME606R 0 0 4 2
Metrology and Measurements Laboratory
9 U15ME607R Turbo Machines Laboratory 0 0 4 2
10 U15GE601BR Soft Skills and Aptitude-IV 0 0 2 1
Total Credits 25
Approved By
Chairman, Mechanical Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.D.Senthilkumar Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Mechanical Engineering, Sixth Semester BE Mechanical Students and Staff, COE
Page 1 of 3
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Mechanical Engineering
S. No Course Code Course Title Lecture Tutorial Practical Credit
*Professional Elective
Approved By
Chairman, Mechanical Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.D.Senthilkumar Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Mechanical Engineering, Sixth Semester BE Mechanical Students and Staff, COE
Page 2 of 3
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Mechanical Engineering
S. No Course Code Course Title Lecture Tutorial Practical Credit
**Open Elective
1 U15CE1001R Building Services and Safety Regulations
2 U15CE1002R Disaster Management
Approved By
Chairman, Mechanical Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.D.Senthilkumar Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Mechanical Engineering, Sixth Semester BE Mechanical Students and Staff, COE
Page 3 of 3
30.11.2018 Regulations-2015R
Course Code U15ME601R L T P C
3
Course Name FINITE ELEMENT METHOD 3 0 0
Course Outcomes
Unit I INTRODUCTION L 9 T 0
Finite element modeling- Coordinates and shapes functions- Potential energy approach -
Galarkin approach- Assembly of stiffness matrix and load vector- linear bar element - nodal
approximation- development of shape functions- quadratic shape functions - element
matrices and vectors- extension to plane truss- development of element equations –
assembly- element connectivity -global equations- solution methods.
Scalar Variable Problems- Finite element modeling- CST element- Element equations, Load
vectors and boundary conditions – Assembly - Vector Variable problems- Elasticity
equations- Plane Stress, Plane Strain and Axisymmetric problems- Formulation- element
matrices- Assembly - boundary conditions and solutions.
30.11.2018 Regulations-2015R
Unit IV ISOPARAMETRIC ELEMENTS L 9 T 0
Natural coordinates, Iso parametric elements, Four node quadrilateral element– Shape
functions- Element stiffness matrix and force vector – Numerical integration – Gauss
quadrature.
Learning Resources
Text Books
2. David V.Hutton, ”Fundamentals of Finite Element Analysis”, Tata McGraw-Hill Edition, 2005, ISBN:
9780070601222.
Reference Books
1. Logan D.L., “A First course in the Finite Element Method”, Fourth Edition, Cengage Learning, 5 th
Edition, 2012, ISBN-13: 9788131517307.
2. Rao S.S., “The Finite Element Method in Engineering”, Fourth Edition, Published by Elsevier, 5th
Edition, 2010, Hardcover ISBN: 9781856176613, eBook ISBN: 9780080952048
3. P.Seshu, “Text Book of Finite Element Analysis”, Prentice-Hall of India Pvt. Ltd., NewDelhi, 2007.
ISBN-978-203-2315-5.
4. J.N.Reddy, “An Introduction to the Finite Element Method”, McGraw-Hill International Editions,
2005, 3rd Edition, ISBN: 9780070607415.
30.11.2018 Regulations-2015R
Course Code U15ME602R L T P C
Course Outcomes
Unit I INTRODUCTION L 9 T 0
Fluid machines-Classification. Turbo machines - parts of turbo machines. Comparison
between positive displacement machines and turbo machines. Types of turbo
machines. Euler’s energy transfer equation –components of energy transfer.
30.11.2018 Regulations-2015R
Learning Resources
Text Books
1. B.K.Venkanna, “Fundamentals of Turbomachinery” PHL Learning Private Limited,
2014.
2. Yahya.S.M., ‘Turbines, Compressores and Fans”, Tata McGraw-Hill, 2010.
Reference Books
1. Bansal, R.K., Fluid Mechanics and Hydraulics Machines, Laxmi Publications (P)
Ltd., New Delhi.2010
2. Sukumar Pati., “Fluid Mechanics and Hydraulics Machines”, Tata McGraw Hill
publications (P) Ltd, New Delhi, 2012
3. Kumar. K.L., Engineering Fluid Mechanics (VII Ed.) Eurasia Publishing House (P)
Ltd., New Delhi, 1995.
4. Ganesan .V., “Gas Turbines”, Tata McGraw-Hill, New Delhi, 2002.
30.11.2018 Regulations-2015R
Course Code U15ME603R L T P C
Design of helical gear :Terminology – Speed ratios and number of teeth – Force analysis – Tooth
stresses – Dynamic effects – Fatigue strength – Factor of safety – Gear materials – Module and
face width – Pressure angle in the normal and transverse plane – Equivalent number of teeth –
Forces and stresses – Estimating the size of the helical gears
Worm Gear: Terminology – Thermal capacity – materials - forces and stresses and Efficiency -
Design of Worm gear – Estimating the size of the worm gear pair.
30.11.2018 Regulations-2015R
Learning Resources
Text Books
1. Bhandari V.B, “Design of Machine Elements”, Tata McGraw-Hill Education, 2010.
2. Kurt M. Marshek; Robert C. Juvinall, “Fundamentals of Machine Component
Design”, 5th Edition, Wiley 2011.
3. Robert L Norton, “Machine Design - An Integrated Approach”, Pearson Education,
New Delhi, 2003.
Reference Books
1. Joseph E. Shigley, Charles R. Mischke and Charles R. Mischke“Mechanical
Engineering Design”, McGraw – Hill International Editions, 2003.
2. Prabhu, T.J., “Design of Transmission Elements”, Prabhu publisher, 2003.
3. Steven R. Schmid, Bernard J. Hamrock, Bo. O. Jacobson.,“ Fundamentals of
Machine Elements”, CRC Press., 2013.
4. G.M. Maitra. and L.V. Prasad., “Hand book of Mechanical Design”, McGraw-Hill
Inc., US, New edition 1985.
30.11.2018 Regulations-2015R
Course Code U15ME604R L T P C
Course Outcomes
Upon completion of this course the students will be able to
CO1 Explain fundamentals of General Measurement system and Errors in Measurement.
Discuss fundamentals of Linear and Angular Measurements and various devices used
CO2
for measuring the different parameters.
Describe screw thread terminology, errors in threads, measurement of various
CO3 elements of thread, Gear and their types, gear terminology, measurement of various
elements of gears.
Analyze the working principle of various precision instruments based on laser,
CO4
machine tool metrology and coordinate measuring machine.
CO5 Discuss the measurement of force, power, torque, flow and temperature.
30.11.2018 Regulations-2015R
Unit V COMPUTER AIDED QUALITY CONTROL AND FMS L 9 T 0
Force, torque, power - mechanical, Pneumatic, Hydraulic and Electrical type – strain gauge,
piezoelectric type sensors – load cell –pressure sensors – dynamometer – transducers - Flow
measurement: Venturimeter, Orifice meter, rotameter, Pitot tube – special flow measurement -
Temperature: bimetallic strip, thermocouples, electrical resistance thermometer – Reliability and
Calibration.
Total Number of hours: 45
Learning Resources
Text Books
1. Jain R.K., “Engineering Metrology”, Khanna Publishers, 2009
2. Alan S. Morris, “The Essence of Measurement”, Prentice Hall of India, 2001
Reference Books
1. Gupta S.C, “Engineering Metrology”, Dhanpat rai Publications, 2005
3. Jayal A.K, “Instrumentation and Mechanical Measurements”, Galgotia Publications
2000
4. Bewoor “Metrology & Measurement” Tata McGraw-Hill Education, 2009
5. Bucher and Jay L ”The Metrology Handbook, Hardcover, 2012
6. Raghavendra and Krishnamurthy Engineering Metrology and Measurements,
Paperback, 2013.
30.11.2018 Regulations-2015R
Course Code U15ME605R L T P C
Pre-requisites subject: Computer Aided Drafting Laboratory, Strength of material laboratory and Heat
and mass transfer laboratory
Course Outcomes
CO1 Analyze displacement, stress and strain of one dimensional and two
dimensional element problems using analysis software.
CO2 Solve displacement, stress ,strain and temperature distribution of 2D
components using analysis software
CO3 Draw model, analyze and simulation of the real time problems using
modeling and analysis software.
LIST OF EXPERIMENTS
Analysis:
1. Simulation of Air conditioning system with condenser and evaporator temperatures as input to
estimate COP
2. Simulation of cam and follower mechanism.
3. Simulation of Spring Mass Damper System Control
4. Simulation of heat exchanger process
30.11.2018 Regulations-2015R
LIST OF EQUIPMENTS:
60 systems (Intel core 2 quad E8200@2.33GHz,1033MHz FSB cache, 2GB RAM, 250GB HDD, 18.5” TFT
Monitor)
30.11.2018 Regulations-2015R
Course Code U15ME607R L T P C
Course Outcomes
Upon completion of this course the students will be able to
CO1 Analyze the performance of the various pumps and turbines (Pelton,
Francis and Kaplan turbine).
CO2 Conducting performance test on centrifugal blower.
LIST OF EXPERIMENTS
1. Conducting experiments and drawing the characteristic curves of centrifugal pump / submersible
pump
2. Conducting experiments and drawing the characteristic curves of Gear pump.
3. Conducting experiments and drawing the characteristic curves of Pelton wheel.
4. Performance Test on Steam Boiler.
5. Conducting experiments and drawing the characteristics curves of Francis turbine.
6. Conducting experiments and drawing the characteristic curves of Kaplan turbine.
7. Performance test on centrifugal blower.
8. Performance test on Steam turbine.
30.11.2018 Regulations-2015R
Course Code U15ME606R L T P C
Course outcomes
Total Hours 45
LIST OF EXPERIMENTS
1. Calibration of Vernier, Micrometer and Dial Gauge
2. Checking Linear Dimensions of a part using slip gauges
3. Measurement of Taper Angle using sine bar / bevel protractor
4. Measurement of cutting tool parameters using tool makers microscope
5. Measurement of straightness and flatness using auto-collimator
6. Measurement of thread parameters using Profile projector and Floating carriage
micrometer
7. Checking the limits of dimensional tolerances using comparators (Mechanical /
Pneumatic / Electrical)
8. Measurement of Temperature using Thermocouple / Pyrometer
9. Measurement of Force using load cell / proving ring
10. Measurement of Gear tooth dimensions using Gear Tooth Vernier
11. Study of Displacement using Strain Gauge / LVDT / Wheatstone Bridge
12. Study of torque using torque sensor
30.11.2018 Regulations-2015R
PROFESSIONAL ELECTIVES
Course Outcomes
Unit I INTRODUCTION L 9 T 0
History of Python – Installing Python – Problem solving strategies – Problem analysis –
Algorithms – Flow charts – Token – Core data type. Object oriented programming: Programming
languages – Paradigms – Features – Merits and demerits - Writing simple programs in Python.
30.11.2018 Regulations-2015R
Learning Resources
Text Books
3. Reema Thareja, “Python Programming using Problem Solving Approach”, Oxford
University Press, New Delhi, 2017.
4. Balagurusamy, E., “Introduction to Computing and Problem Solving Using Python”,
McGraw Hill Education (India) Private Limited, New Delhi, 2016.
Reference Books
5. Nageswara Rao, R., “Core Python Programming”, dreamtech press, second edition,
2018.
6. Ashok Namdev Kamthane & Amit Ashok Kamthane, “Programming and Problem
Solving with Python”, McGraw Hill Education (India) Private Limited, Chennai,
2018.
7. Wesley J. Chun, “Core Python Programming”, Pearson, 2nd Edition, 2006.
8. Allen B.Downey, “Think Python: How to Think Like a Computer Scientist”, O'Reilly
Media, 2nd Edition, 2015.
30.11.2018 Regulations-2015R
Course Code U15ME905R L T P C
Pre-requisite subjects: Automobile Engineering and basic electrical and electronic engineering.
Course Outcomes
CO2: Discuss the engine management systems and electronic injection systems.
CO3: Demonstrate the vehicle motion control, anti - lock braking and Electronic power
steering system.
CO4: Explain the hydraulic actuation system, Vehicles lighting Circuits and electric windows
systems.
CO5: Identify the electronics controlling components and explain the operation of various
controlled systems.
Basic sensor arrangement – Types of sensors. Oxygen Sensor – Cranking Sensor – Position Sensors –
Engine cooling water temperature Sensor – Engine oil pressure Sensor – Fuel metering – Vehicle speed
sensor and detonation sensor – Stepper motors – Relays, solenoids - Microprocessor and Micro Computer
applications in automobiles.
Introduction - components for engine management system - Open loop and closed loop control system –
Engine cranking and warm up control – Acceleration, deceleration and idle speed control-Integrated
engine system – Feedback carburetor system – Throttle body injection and multi point fuel injection
system– Advantage of electronic ignition systems – Types of solid state ignition systems and their
principles of operation – Electronic spark timing control.
Introduction-Electronic management of chassis systems, Vehicle motion control, anti - lock braking
system, Tyre pressure monitoring system, Collision avoidance system, Traction control system, Active
suspension system ,Key less entry system and Electronic power steering system.
Wiper system, flasher, electric fuel pump, hydraulic actuation system, Brake Actuation Warning System.
Traficators, Flash System, Windshield Wiper, Starting Systems – Charging Systems –climate control and
electronic displays, Vehicles lighting Circuits Signaling Circuit, electric windows systems, seat belt
tensioners.
30.11.2018 Regulations-2015R
Unit-5 Electronics Control systems
Introduction of Control Systems - Automatic Cabin climate control, Automatic Cruise Control , Air Bag
Control, ABS Control, Automatic Transmission Control, Electronic steering Control, Automatic gear control,
Electric Power Steering, Electronic Distributor-less ignition control, Electronic Fuel Control Exhaust
emission control , Electronic Clutch Control, Automotive central locking and anti-theft system control.
Text Books
Reference Books
30.11.2018 Regulations-2015R
Course Code: U15ME906R L T P C
Course Outcomes
Defining IoT, Characteristics of IoT, Physical design of IoT, Logical design of IoT, IoT Communication
models, IoT communication APIs, Enabling Technologies, IoT levels & Deployment templates.
Machine to Machine, Difference between IoT and M2M, Sensors, Actuators, Communication modules -
RFID, Bluetooth, WiFi, ZigBee, and Power sources.
Home automation, Cities, Environment, Industry, Developing simple IoT application through embedded
platforms – Arduino, Raspberry Pi.
Introduction, Design layers, Design complexity, IoT/IIoT application in the premises, Supply-Chain,
Customer monitoring, Connected Car & its application and services, Case study- Smart city street lights
control ad monitoring.
Total: 45 Hrs
Learning Resources
TEXTBOOKS
1. David Hanes, Gonzalo Salgueiro, Patrick Grossetete, Rob Barton and Jerome Henry, ―IoT
Fundamentals: Networking Technologies, Protocols and Use Cases for Internet of Things, Cisco
Press, 2017
30.11.2018 Regulations-2015R
REFERENCES BOOKS
1. Arshdeep Bahga, Vijay Madisetti, ―Internet of Things – A hands-on approach, Universities Press,
2015
2. Olivier Hersent, David Boswarthick, Omar Elloumi , ―The Internet of Things – Key applications
and Protocols, Wiley, 2012 (for Unit 2).
3. Jan Ho¨ ller, Vlasios Tsiatsis , Catherine Mulligan, Stamatis , Karnouskos, Stefan Avesand. David
Boyle, “From Machine-to-Machine to the Internet of Things – Introduction to a New Age of
Intelligence”, Elsevier, 2014.
30.11.2018 Regulations-2015R
Course Code U15ME909R L T P C
CO 1 Explain the fundamental concepts and various elements in Tool design and discuss the features of
Jigs and fixture mechanisms, pneumatic and hydraulic actuators.
CO 2 Explain the fundamental components and working principles of Jigs and its types. Outline the
working principle and characteristic of various parts with its real time applications.
CO 3 Design the fixture for the machines such as lathe, milling machine, Planner, boring and broaching.
Also design the fixtures for grinding, shaping, welding and planning operations for a given component.
CO 4 Design the fundamental and working principle of press tools, Dies and its accessories.
CO 5 Develop the progressive dies, compound dies and bending dies for blanking operations. Also develop
the drawing of dies.
Unit I Purpose Types and Functions of Jigs and Fixtures L 9 T 0
Tool design objectives - Production devices - Inspection devices - Materials used in Jigs and
Fixtures – Types of Jigs - Types of Fixtures-Mechanical actuation-pneumatic and hydraulic
actuation-Analysis of clamping force- Tolerance and error analysis.
Unit II Jigs L 9 T 0
Drill bushes –different types of jigs-plate latch, channel, box, post, angle plate, angular post,
turnover, pot jigs- Automatic drill jigs-Rack and pinion operated - Air operated Jigs components -
Design and development of Jigs for given components.
30.11.2018 Regulations-2015R
Learning Resources
Text Books:
1. Edward G Hoffman, “Jigs & Fixture Design” 5th Edition, 2008, Thomson – Delmar
Learning, Singapore, ISBN: 9788131505533.
2. Joshi, P.H. “Jigs and Fixtures”, 3rd Edition, 2010, Tata McGraw Hill Publishing Co.,
Ltd., New Delhi, ISBN: 9780070680739.
3. Donaldson, Lecain and Goold “Tool Design”, 4th Edition Tata McGraw Hill, 2012.
Reference Books
1. K. Venkataraman, “Design of Jigs Fixtures & Press Tools”, Tata McGraw Hill, New
Delhi, reprint 2015. ISBN : 978-11-1915-567-6
2. Hiram E Grant, “Jigs and Fixture” Tata McGraw-Hill, New Delhi, 2003.
3. ASTME Fundamentals of Tool Design, Prentice Hall of India.
4. Design Data Handbook PSG College of Technology, Coimbatore.
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Electrical and Electronics Engineering
S. No Course Code Course Title Lecture Tutorial Practical Credit
Theory
1 U15EE601R Power System Protection and Switchgear 3 0 0 3
2 U15EE602R Power System Analysis 2 2 0 3
3 U15EE603R Solid State Drives 3 0 0 3
4 U15EE604R Comprehension 2 0 0 2
U15EE924R Elective – Automotive Electrical Technology
5 U15EE908R Elective – Biomedical Instrumentation 3 0 0 3
U15EE923R Elective – Internet of Things
U15CE1002R Open Elective – Disaster Management
U15CE1003R Open Elective – Energy Efficiency and Green Building
U15CE1004R Open Elective – Municipal Solid Waste Management
U15CS1003R Open Elective – Internet of Things
6 3 0 0 3
U15CS1005R Open Elective – Object Oriented Programming and Data Structures
U15FT1001R Open Elective – Fundamentals of Fashion Design
U15IT1003R Open Elective – Problem Solving Techniques using Java Programming
U15IT1004R Open Elective – Python Programming
Practical
7 U15EE605R Solid State Drives Laboratory 0 0 4 2
8 U15EE606R Electrical System Design Laboratory 0 0 4 2
9 U15ENG601R Communication Skills Laboratory 0 0 2 1
10 U15GE601BR Soft Skills and Aptitude - IV 0 0 2 1
Total Credits 23
Approved By
Chairperson, Electrical and Electronics Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.S.Padma Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Electrical and Electronics Engineering, Sixth Semester BE EEE Students and Staff, COE
30.11.2018 Regulations-2015R
U15EE601R POWER SYSTEM PROTECTION AND SWITCHGEAR 3003
COURSE OUTCOMES:
At the end of this course the students will be able to,
Discuss the need for the protection and various digital protection schemes and analyse relay
characteristics.
Discuss protection schemes of generator, transformer, bus bars and transmission lines.
Describe the method of circuit breaking, arcing phenomena – various arc theories – capacitive and
inductive breaking.
Discuss the modern trends in protectionand working of different types of circuit breakers.
Describe the methods of protection against over voltages and insulation co-ordination in power system.
UNIT I RELAYS 9
Need for protection – essential qualities of protective relays – over current relays directional, distance and
differential, under frequency, negative sequence relays – static relays – microprocessor – based relays. – Digital
filtering in protective relays – relays algorithms –Impedance relay, MHO relay – quadrilateral relay.
UNIT II APPARATUS PROTECTION 9
Apparatus protection – generator and transformer protection – protection of bus bars, transmission lines, CTs &
PTs and their application in protective schemes.
UNIT III THEORY OF ARC QUENCHING 9
Physics of arc phenomena and arc interruption – re-striking voltage &recovery voltage, rate of rise of recovery
voltage, current chopping, interruption of capacitive current, resistance switching – DC circuit breaking.
TEXT BOOKS:
1. Ravindranath.B and Chander.N,“Power System Protection and Switchgear”, New Age international
Publishers, 2011.
2. BadriRam andB.H.Vishwakarma,“Power System Protection and Switchgear”, Tata McGraw Hill Education
Pvt. Ltd, 2013.
REFERENCES:
1. Chakrabarti.A, Soni.M.L, Bhatnagar.U.S.,Gupta.P.V, “A text book on PowerSystem Engineering”,
Dhanpatrai&Co. pvt.ltd., 2013.
2. C.L. Wadhwa, “Electrical Power Systems”, New Age International (P) Ltd., 2016.
3. RavindraP.Singh , “ Digital Power System Protection” , PHI , New Delhi, 2007.
4. Sunil S. Rao, “Switchgear and Protection”, Khanna Publishers, 13th Edition, 2015.
30.11.2018 Regulations-2015R
U15EE602R POWER SYSTEM ANALYSIS 2 2 0 3
COURSE OUTCOMES:
At the end of this course the students will be able to,
Model the various power system components and to draw the reactance diagram for practical power
system networks.
Solve the power flow equation for power system networks using iterative solution techniques.
Carry out symmetrical fault analysis for power system networks using bus impedance matrix formulation.
Carry out unsymmetrical fault analysis for various power system networks using symmetrical
components.
Model the power system for stability analysis and to solve the swing equation using modified Euler’s and
Runge-Kutta methods.
REFERENCES:
1. Gupta, J.B., “A Course in Electrical Power”, S.K.Kataria and Sons, 2009.
2. Abhijit Chakrabarti, Sunita Halder, “Power System Analysis: Operation and Control”, 2 ndEdition, Prentice Hall of
India Learning Private Limited, 2008.
3. Stagg.G.W, and El-Abaid.A.H.,“Computer Methods in Power System Analysis”, Tata McGraw Hill Pub Co. Ltd, New
Delhi, 1993.
4. John J. Grainger & William Stevenson JR., “Power system Analysis by Tata McGraw-Hill New Delhi, 1st Ed., 2003
30.11.2018 Regulations-2015R
U15EE603R SOLID STATE DRIVES 3 0 0 3
COURSE OUTCOMES:
At the end of this course the students will be able to,
Describe the steady state operation and transient dynamics of a motor load system.
Analyse the operation of the converter and chopper fed DC drives.
Discuss the operation of solid state speed control of induction motor.
Discuss the performance of solid state speed control of synchronous motor.
Describe the stepper motor, solar pump drive and battery powered electric vehicle.
REFERENCES:
1. Pillai.S.K., “A first course on Electrical Drives”, New Age International (P) Ltd., 1984.
2. VedamSubramanyan, “Thyristor control of Electrical Drives”, Tata McGraw Hill, 1996.
3. Sen P.C., “Thyristor Drives”, John Wiley & sons, New York, 1993.
4. R. Krishnan, ‘Electric Motor & Drives Modeling, Analysis and Control’, Prentice Hall of India, 2001.
30.11.2018 Regulations-2015R
U15EE604R COMPREHENSION 2 0 0 2
Review of Electric Circuits, Electromagnetic Fields, Signals and Systems, Electrical Machines, Control
Systems, Electrical and Electronic Measurements, Analog and Digital Electronics and Power Electronics.
TOTAL: 30 Hours
30.11.2018 Regulations-2015R
U15EE605R SOLID STATE DRIVES LABORATORY 0042
COURSE OUTCOMES:
At the end of this course the students will be able to,
Simulate AC and DC drives using power electronics modules and the performance characteristics of AC,
DC and special drives.
Analyse the speed control using microcontroller, DSP and PLC based control of VFD
Analyse the performance parameters of electrical drives.
LIST OF EXPERIMENTS:
30.11.2018 Regulations-2015R
U15EE606R ELECTRICAL SYSTEM DESIGN LABORATORY 0 0 4 2
COURSE OUTCOMES:
At the end of this course the students will be able to,
Create revit model and single line diagram for an electrical layout
Design and implement electrical components for a building
Panel scheduling for electrical system of a building
LIST OF EXPERIMENTS:
1. Create Revit models by linking and setting up the architecture and structural file.
2. Create copy/monitor levels for an electrical layout.
3. Create visibility graphics settings for designing an electrical design layout.
4. Create spaces for an electrical system model in Revit architecture.
5. Design single line diagram for a living room.
6. Design lighting circuits for a building.
7. Design power circuits for a building.
8. Design fire protection and alarm system for a building.
9. Design distribution system for an electrical load.
10. Calculate panel schedules for an electrical system layout.
11. Implement addition and modification of tags for a given layout.
12. Verify coordination of electrical system design with HVAC/Plumbing.
Total: 60 Hours
30.11.2018 Regulations-2015R
U15EE908R BIO MEDICAL INSTRUMENTATION 3 0 0 3
COURSE OUTCOMES:
At the end of this course, students will be able to,
Outline the function of various systems of body and sketch basic components of biomedical system and
explain principle of operation of various transducers used for physiological measurements.
Illustrate various electrodes and amplifiers used in physiological measurements and Describe safety
parameters and the Lead system, recording methods of ECG, EEG, EMG and ERG.
Explain the methods to measure non-electrical parameters with block diagram.
Describe the imaging techniques and outline the requirements of biotelemetry and its elements.
Explain the basic blocks and working of assisting and therapeutic equipment.
TEXT BOOKS:
1. Kandpur, R.S., “Handbook of Biomedical Instrumentation”, Mcgraw Education (India) Private limited, 2016.
2. M.Arumugam, “Bio – Medical Instrumentation”, Anuradha Agencies, 2003.
REFERENCES:
1. Richard Aston, “Principles of Biomedical Instrumentation and Measurement”, Merrill publishing company, 1990.
2. Leslie Cromwell, “Biomedical Instrumentation and measurement”, PHI, 2002.
3. L.A.Geddes and L.E.Baker, “Principles of Applied Bio – Medical Instrumentation”, John Wiley & Sons, 1975.
4. C.Rajarao and S.K.Guha, “Principles of Medical Electronics and Bio – medical Instrumentation”, Universities press
(India) Ltd., Orient Longman Ltd., 2000.
30.11.2018 Regulations-2015R
U15EE923R INTERNET OF THINGS 3 0 0 3
COURSE OUTCOMES
At the end of the course, the students will be able to:
Describe the characteristics, physical and logical designs, domains and architecture of IoT
Differentiate M2M and IoT
Write a program using Python programming language
Identify the various IoT elements specific to the applications
Design a portable IoT using Arduino/Raspberry Pi incorporating cloud and analytics.
30.11.2018 Regulations-2015R
U15EE924R AUTOMOTIVE ELECTRICAL TECHNOLOGY 3 0 0 3
COURSE OUTCOMES
At the end of the course, the students will be able to:
Categorize various automotive batteries construction, testing with maintenance and lighting system in
vehicle.
Analyse the various charging system components and starting motor characteristics.
Analyse the electronic controlled ignition systems and injection systems used in automotive vehicles.
Explain the various sensors used in automotive field and detail on the usage of microprocessors for vehicles
sophistication.
Describe the various safety and accessory systems in automotive vehicles.
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Electronics and Communication Engineering
Chairman, Electronics and Communication Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.R.S.Sabeenian Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Electronics and Communication Engineering, Sixth Semester BE ECE Students and Staff, COE
(Page 1of3)
30.11.2018 Regulations-2015R
U15EC917R Bio-Medical Instrumentation 3 0 0 3*
Approved By
Chairman, Electronics and Communication Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.R.S.Sabeenian Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Electronics and Communication Engineering, Sixth Semester BE ECE Students and Staff, COE
(Page 2of 3)
30.11.2018 Regulations-2015R
U15ME1002R Renewable Energy Sources 3 0 0 3
Practical
7 U15EC604R Digital Image Processing Laboratory 0 0 2 1
Total Credits 22
Approved By
Chairman, Electronics and Communication Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.R.S.Sabeenian Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Electronics and Communication Engineering, Sixth Semester BE ECE Students and Staff, COE
(Page 3 of 3)
30.11.2018 Regulations-2015R
U15EC601R ANTENNA AND WAVE PROPAGATION L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Analyze the antenna fundamentals and Radiation pattern.
2. Evaluate the different parameters of antenna arrays.
3. Design microwave antennas for the given specifications.
4. Analyze the different measurement techniques of antenna parameters and special antennas.
5. Analyze the atmospheric and terrestrial effects on radio wave propagation.
UNIT ANTENNA FUNDAMENTALS 9
I Basic Antenna Parameters – Reciprocity Principle – Friis Transmission Formula – Retarded
Vector Potential – Power Radiated and Radiation Resistance of Current Element – Radiation
from Half-wave Dipole Antennas – Folded Dipole – Loop Antenna.
Total: 45
TEXT BOOKS
1. John D. Kraus and Ronald Marhefka, “Antennas”, Tata McGraw-Hill Book Company, Reprint 2016.
2. C.A.Ballanis, “Antenna Theory Analysis and Design”, Wiley inter science, 2006.
REFERENCE BOOKS
1. Prasad K.D., “Antennas and Wave Propagation”, Satya Prakashan, Reprint 2018.
2. Jordan E.C and Balmain, “Electro Magnetic Waves and Radiating Systems”, PHI, 2015.
3. Collins R.E., “Antennas and Radio Propagation”, McGraw-Hill, 1987.
30.11.2018 Regulations-2015R
U15EC602R DIGITAL IMAGE PROCESSING L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Describe the fundamentals of monochrome and color image processing and analyse the basic relations between
pixels, connectivity and distance measures.
2. Apply DFT DCT, DST, Walsh, Hadamard, Haar, wavelet and SVD transform for images.
3. Apply image enhancement techniques in spatial and frequency domain.
4. Analyze image restoration using constrained and unconstrained filters and image segmentation approaches.
5. Appraise the need for image compression using lossy and lossless techniques and Morphological operations.
UNIT DIGITAL IMAGE FUNDAMENTALS AND TRANSFORMS 9
I Fundamental Steps in Digital Image Processing – Elements of Visual Perception – Some Basic
Relationship Between Pixels – Connectivity – Distance Measure – Brightness – Contrast – Hue- Saturation
– Mach Band Effect – Image Sampling – Quantization – Dither – Colour Image Fundamentals RGB – HSI
Models – Conversion from RGB to HSI.
UNIT IMAGE TRANSFORMS 9
II 1D DFT – 2D Transforms – DFT – DCT – DST – Walsh – Hadamard – Haar Transform – Discrete
Wavelet Transform – Multi Resolution Analysis – SVD
UNIT IMAGE ENHANCEMENT 9
III Spatial Domain Approach – Point Processing – Image Negative – Contrast Stretching – Gray Level Slicing
– Histogram Equalization – Image Addition – Subtraction – Averaging – Smoothing Filters – Spatial LPF
– Median Filter – Sharpening Filters – Spatial HPF – High Boost Filter – Derivative Filters Frequency
Domain Filters – Homomorphic Filter.
UNIT IMAGE RESTORATION AND SEGMENTATION 9
IV Degradation Model – Noise Models – Types of Restoration – Inverse Filtering – Least Mean Square
(wiener–parametric wiener) Filter – Image Segmentation – Point – Line and Edge Detection – Region
Based Segmentation – Region Splitting and Merging – Thresholding.
UNIT IMAGE COMPRESSION AND MORPHOLOPGICAL OPERATIONS 9
V Image Compression – Lossless Compression – Huffman Coding – Minimum Variance Huffman Coding –
Arithmetic Coding – LZW Coding – Lossy Compression – Transform Coding – Compression Standards –
JPEG Image Compression Standards – MPEG Video Compression Standards-Block Diagram Approach.
Standard Binary Morphological operations-Dilation and Erosion based Operations.
Total 45
TEXT BOOKS
1. Rafael C- Gonzalez- Richard E-Woods, “Digital Image Processing”, Pearson Education, Eleventh Impression,
2013.
2. Jayaraman S., Esakkirajan and Verrakumar, “Digital Image Processing”, TMH New Delhi, 2011.
REFERENCE BOOKS
1. Annadurai S., R. Shanmugalakshmi, “Fundamentals of Digital Image Processing”, Pearson Education India,
2007.
2. Anil K- Jain, “Fundamentals of Digital Image Processing”, Pearson/Prentice Hall of India, 2002.
3. Sridhar.S, “Digital Image Processing”, Oxford University Press, First Edition, 2011.
4. Sabeenian R.S., “Digital Image Processing”, Sonaversity publication, Second Edition reprint, 2014.
5. Kenneth R. Castleman, “Digital Image Processing”, Pearson, 2009.
30.11.2018 Regulations-2015R
U15EC603R EMBEDDED SYSTEMS L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Obtain a broad knowledge on hardware and software architectures of an embedded system.
2. Get the various design process and parameter analysis of the embedded system.
3. Gain the familiarity on PIC microcontroller.
4. Provide an in depth exposure on real time operating system.
5. Design the software and hardware architecture of real time applications.
UNIT ARCHITECTURE OF EMBEDDED SYSTEMS 9
Introduction – Application Areas – Categories of Embedded System – Specialties of Embedded
I
System – Recent Trends in Embedded System – Overview of Embedded System Architecture –
Hardware Architecture – Software Architecture – Communication Software –Process of
Generation of Executable Image – Development-Testing.
UNIT DESIGN AND ANALYSIS OF EMBEDDED SYSTEMS 9
Embedded System Design Process – Formalism for System Design – Memory System
II
Mechanism – CPU Performance – CPU Power Consumption – CPU Buses – Memory Devices
– I/O Devices – Program Design – Model of Programs – Analysis and Optimization of
Execution Time – Power – Energy – Program Size – Program Validation and Testing.
UNIT PIC MICROCONTROLLER 9
PIC 16C61 / 71 Microcontroller Architecture – FSR – Reset Action – Oscillatory Connections –
III
Memory Organizations – Instructions – Addressing Modes – I/O Ports-Interrupts – Timers –
ADC.
UNIT REAL-TIME OPERATING SYSTEM CONCEPTS 9
Architecture of the Kernel – Task and Task Scheduler – Interrupt Service Routines –
IV
Semaphores – Mutex – Mailboxes – Message – Queues – Event Registers – Pipes – Signals –
Timers – Memory Management – Priority Inversion Problem.
UNIT REAL-TIME OPERATING SYSTEM TOOLS AND CASE STUDIES 9
Case Study of an Automatic Chocolate Vending Machine using MUCOS RTOS – Case Study
V
of an Embedded System for Set-top Boxes – Case Study of an Embedded System for a PDA.
Total 45
TEXT BOOK
th
1. 1Marilyn Wolf, “Computers as Components - Principles of Embedded Computer System Design”, 4
. Edition, Morgan Kaufmann Publisher, (An Imprint from Elsevier), 2016.
REFERENCE BOOKS
1. Ajay V Deshmukh, “Microcontrollers Theory and Applications”, 3rd Edition Paper back, Tata McGraw
Hill education, 2017.
2. Shibu K V, “Introduction to Embedded Systems”, 2nd Edition, McGraw Hill, 2016.
3. Raj Kamal, “Embedded Systems Architecture Programming and Design”, 3rd Edition, TMH, 2014.
4. Xiaocong Fan, “Real-Time Embedded Systems: Design Prinicple and engineering practices”, SCI-Tech Connect, Elsevier,
2016.
30.11.2018 Regulations-2015R
U15EC604R DIGITAL IMAGE PROCESSING LABORATORY L T P C
0 0 2 1
COURSE OUTCOMES
At the end of each experiment ,the students will be able to -
1. Write a MATLAB code to demonstrate and perform various operations related to image processing.
2. Generate a LABVIEW code to demonstrate and perform various operations related to image processing.
3. Write a MATLAB code or Generate a LABVIEW code to extract features from Images.
Exp.No List of Experiments
Using Lab VIEW
1. Displaying the Image Properties and Pixel Distance
6. Computing the DWT of an image and displaying the LL, LH, HL and HL images
8. Extracting 1st Order statistical features of an image (Mean and Standard Deviation alone)
9. Computing the Image Histogram and Histogram equalization for the given image.
Using MATLAB
11. Extraction and display of each bits as an image for a given 8 bit gray scale image
12. Computing Fourier Transform and reconstruction of original image from Fourier Transform
a. Without Zero-padding
b. With Zero-padding
16. Creating a degradation model for a given image and applying Wiener Filter
30.11.2018 Regulations-2015R
U15EC605R EMBEDDED SYSTEMS LABORATORY L T P C
0 0 2 1
COURSE OUTCOMES
At the end of each experiment ,the students will be able to -
1. Design an embedded system to get input from and to display using microcontrollers. (8951
Microcontroller, Arduino UNO board and TI MSP430 microcontroller)
2. Design a system by interfacing analog and digital sensors with microcontrollers using
various communication protocols. (8951 Microcontroller, Arduino UNO board and TI
MSP430 microcontroller)
3. Design a system by interfacing with latest microcontrollers like Intel Galileo Gen 2 board
and Raspberry Pi 3.
30.11.2018 Regulations-2015R
U15CS606R DATA STRUCTURES AND OBJECT ORIENTED L T P C
PROGRAMMING IN C++ LABORATORY 0 0 2 1
COURSE OUTCOMES
At the end of each experiment, the students will be able to
2. Develop programs using the concept of classes, static members and constructors
1. Functions with call by value, call by reference, default arguments and function overloading.
2. Design of classes with static and non static members, friend functions and creating array of objects.
30.11.2018 Regulations-2015R
U15EC902R WIRELESS COMMUNICATION L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Apply the knowledge of basic communication systems and its principles, describe the Wireless Systems and
analyze the Spectrum Allocation.
2. Mathematically analyze mobile radio propagation mechanisms and diversity Techniques.
3. Analyze the Path loss models, Design Base Station (BS) parameters and analyze the antenna configurations.
4. Analyze and examine the multiple access techniques and its application.
5. Assess the latest wireless technologies.
UNIT INTRODUCTION TO COMMUNICATION SYSTEMS 9
I History of Wireless Communication – Wireless Vision – Technical Issues – Current Wireless
Systems – Cellular Telephone Systems – Cordless Phones – Wireless LANs – Wide Area Wireless
Data Service – Broadband Wireless Access – Paging Systems – Satellite Networks – Low-Cost
Low Power Radios – Ultra Wideband Radios – The Wireless Spectrum –Methods for Spectrum
Allocation – Spectrum Allocations for Existing Systems.
UNIT MOBILE RADIO PROPAGATION,FADING AND DIVERSITY TECHNIQUES 9
II Mobile Radio Propagation – Reflection – Reflection from Dielectrics – Brewster Angle –
Reflection from Perfect Conductors – Ground Reflection (Two-Ray) model – Diffraction – Fresnel
Zone Geometry – Knife - Edge Diffraction Model – Multiple Knife - Edge Diffraction – Scattering
– Diversity Techniques.
UNIT PATH LOSS MODELS AND BASICS OF ANTENNA 9
III Path Loss Prediction over Hilly Terrain – Practical Link Budget Design using Path Loss Models –
Log-Distance Path Loss Model – Log - Normal Shadowing – Determination of Percentage of
Coverage Area – Design Parameters at Base Station – Antenna Location – Spacing – Heights and
Configurations.
UNIT MULTIPLE ACCESS TECHNIQUES 9
IV Introduction to Multiple Access Techniques – Frequency Division Multiple Access (FDMA) – Time
Division Multiple Access (TDMA) – Code Division Multiple Access (CDMA) – Spread Spectrum
Multiple Access – Power Control –WCDMA – CDMA Network Design OFDM and MC-CDMA.
REFERENCE BOOKS
1. A.F.Molisch, “Wireless Communications”, Wiley, 2013.
30.11.2018 Regulations-2015R
U15EC913R ARTIFICIAL NEURAL NETWORK L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Understand the role of neural networks in engineering, artificial intelligence, and cognitive
modeling.
2. Investigate the computation and use of techniques such as Supervised Learning
3. Examine the computation and use of techniques like SVM and RBFN
4. Apply the role of Attractor Neural Networks in Real time applications
5. Analyze the Neural Networks in SOM and its applications
UNIT INTRODUCTION AND LEARNING 9
I Biological Neuron – Artificial Neural Model – Types of Activation Functions – Architecture-
Feedforward and Feedback – Linear Separability – Non-Linear Separable Problem – XOR
Problem – Multilayer Networks – Learning Algorithms – Error Correction and Gradient Descent
Rules – Learning Objective of TLNs – Perceptron Learning Algorithm – Perceptron Convergence
Theorem.
UNIT SUPERVISED LEARNING 9
II Perceptron Learning and Non Separable Sets – α-Least Mean Square Learning – MSE Error
Surface – Steepest Descent Search – μ-LMS Approximate to Gradient Descent – Application of
LMS to Noise Cancelling – Multi-layered Network Architecture – Backpropagation Learning
Algorithm – Practical Consideration of BP Algorithm.
UNIT SUPPORT VECTOR MACHINES AND RADIAL BASIS FUNCTION 9
III Learning from Examples – Statistical Learning Theory – Support Vector Machines – SVM
Application to Image Classification – Radial Basis Function Regularization Theory – Generalized
RBF Networks – Learning in RBFNs – RBF Application to Face Recognition.
UNIT ATTRACTOR NEURAL NETWORKS 9
IV Associative Learning Attractor Associative Memory – Linear Associative Memory – Hopfield
Network – Adaptive Resonance Theory.
UNIT SELF-ORGANIZATION FEATURE MAP 9
V Maximal Eigenvector Filtering – Extracting Principal Components – Generalized Learning Laws
– Vector Quantization – Self-Organization Feature Maps – Application of SOM – Growing
Neural Gas.
Total: 45
TEXT BOOKS
1. Christopher Bishop, “Pattern Recognition and Machine Learning”, Springer, 2006.
2. K. P. Soman, R. Loganathan, and V. Ajay, “Machine Learning with SVM and Kernel Methods, PHI
Learning Private Ltd.”, New Delhi.2011.
REFERENCE BOOKS
1. Thomas F. Quatieri cloth, “Discrete-Time Speech Signal Processing: Principles and Practice”,
Prentice Hall Inc, 2008.
2. Bernard Scholkopf and Alexander J Smola, “Learning with Kernel”, MIT Press, London,
England, 2002.
30.11.2018 Regulations-2015R
U15EC914R FPGA BASED SYSTEM DESIGN L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Describe the types of ASIC and cell design
2. Analyze the Actel ACT, Xilinx and Altera FPGA Logic Cells
3. Analyze the Actel ACT, Xilinx and Altera FPGA I/O Cells and Interconnect.
4. Examine the FPGA Software and Low Level design Entry.
5. Explain the types of simulation.
UNIT INTRODUCTION TO ASICs 9
Type of ASICs – Design Flow – Transistors as Resistors – Transistor Parasitic Capacitance –
I
Logical Effort – Library-Cell Design – Library Architecture – Gate-Array Design – Standard –
Cell Design.
UNIT FPGA LOGIC CELLS 9
Antifuse – Static RAM – EPROM and EEPROM Technology – Practical Issues – Specification
II
– PREP Benchmarks – FPGA Economics – Actel ACT –Xilinx LCA – Altera FLEX – Altera
MAX
UNIT FPGA I/O CELLS AND INTERCONNNECT 9
DC Output – AC Output – DC Input – AC Input – Clock Input – Power Input – Xilinx I/O
III
Block – Actel ACT – Xilinx LCA – Xilinx EPLD – Altera MAX 5000 and 7000 Altera – MAX
9000 – Altera FLEX – Rocket I/O – ADC Interfacing – High Speed Interfacings (SPI, I2C).
UNIT FPGA SOFTWARE AND LOW LEVEL DESIGN ENTRY 9
Design Systems – Logic Synthesis – The Halfgate ASIC – Schematic Entry – Low-Level
IV
Design Languages – PLA Tools – EDIF – CFI Design Representation.
UNIT SIMULATION 9
V Types of Simulation – Logic Systems – Cell Models – Delay Models – Static Timing Analysis
(STA) – Formal Verification – Switch-Level Simulation – Transistor-Level Simulation – Clock
Tree Synthesis.
Total 45
TEXT BOOKS
1. Juan Jose Rodriguez, Eduardo de la Torre Arnanz, Maria Dolones Valdes Pena ,“FPGAs Fundamentals,
Advanced Features and Applications in Industrial Electronics”, CRC Press , 2016.
2. Michael John Sebastian Smith “Application Specific Integrated Circuits”, Pearson Education., 2013.
REFERENCE BOOKS
1. Varley sklyarov, Louliie Sklyarova, Alexander Barkalov, Larysa Titarenko , “Synthesis and Optimisation
of FPGA - based Systems”, Springer, 2016.
2. Wolf Wayne, “FPGA Based System Design”, Pearson Education India, 2004.
3. Design manuals of Altera, Xilinx and Actel.
30.11.2018 Regulations-2015R
U15EC915R COMPUTER ARCHITECTURE L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Illustrate the operational concepts of computers and classify instruction set architectures.
2 .Identify the mechanism of control signals generation in Hardwired control and micro programmed control
unit.
3. Illustrate processing of pipelined operation; list various types of hazards and methods to overcome
hazards.
4. Discriminate main memory, cache memory and Virtual memory concepts.
5. Design I/O system requirements for any commercial processor.
BASIC STRUCTURE OF COMPUTERS
UNIT
Functional Units – Basic Operational Concepts – Bus Structures – Performance and Metrics –
I 9
Instructions and Instruction Sequencing – Hardware – Software Interface – Instruction Set
Architecture – Addressing Modes – RISC – CISC.
II BASIC PROCESSING UNIT
UNIT
Fundamental Concepts – ALU Design – Fixed Point and Floating Point Operations – Execution
II 9
of a Complete Instruction – Multiple Bus Organization – Hardwired Control – Micro
Programmed Control.
PIPELINING
UNIT
Basic Concepts – Data Hazards – Instruction Hazards – Influence on Instruction Sets – Data Path 9
III and Control Considerations – Performance Considerations – Exception Handling.
MEMORY SYSTEM
UNIT
Basic Concepts – Semiconductor RAM – ROM – Speed – Size and Cost – Cache Memories –
IV 9
Improving Cache Performance – Virtual Memory – Memory Management Requirements –
Associative Memories – Secondary Storage Devices.
I/O ORGANIZATION
UNIT
Accessing I/O devices – Programmed Input/Output -Interrupts – Direct Memory Access – Buses
V 9
– Interface Circuits – Standard I/O Interfaces (PCI, SCSI, USB, SATA, and ISA) – I/O
processors.
Total: 45
TEXT BOOK
1. Carl Hamacher, Zvonko Vranesic and Safwat Zaky, “Computer Organization”, Fifth Edition, Tata
McGraw Hill, 2012.
REFERENCE BOOKS
1. David A. Patterson and John L. Hennessy, “Computer Organization and Design: The
Hardware/Software interface”, Third Edition, Elsevier, 2005.
2. William Stallings, “Computer Organization and Architecture – Designing for Performance”, Sixth
Edition, Pearson Education, 2003.
3. Dr.M.Usha, T.S. Srikanth, “Computer System Architecture and Organization”, Wiley Publications, 2013.
30.11.2018 Regulations-2015R
U15EC916R L T P C
MEASUREMENT AND INSTRUMENTATION
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Discuss the basics of measurement and to study the various digital and analog instruments
2. Examine the fundamentals of signal generators and analyzers
3. Analyze the working of cathode ray oscilloscope and digital storage oscilloscope.
4. Explain the various storage and display devices
5. Explain basics of virtual instrumentation with the basic programming technique
DIGITAL & ANALOG INSTRUMENTS
UNIT
Digital method for measuring frequency, period, Time interval - Digital voltmeter -
I 9
Microprocessor based DMM - IEEE 488 bus - D.C, A.C voltmeters – Ammeters – Multimeter –
True RMS meter.
SIGNAL GENERATORS AND ANALYZERS
UNIT
Sine wave generator – Frequency synthesized sine wave generator – Sweep frequency generator,
II 9
pulse and square wave generator – Function generator – Wave analyzer – Applications –
Harmonic distortion analyzer – Spectrum analyzer – Applications.
CATHODE RAY OSCILLOSCOPE
UNIT
General purpose oscilloscope – Vertical and horizontal deflection systems – Delay line –
III 9
Multiple trace – Dual beam and dual trace – Probes – Oscilloscope techniques – Special
oscilloscopes – Storage oscilloscopes – Sampling oscilloscope.
DISPLAY AND RECORDING DEVICES
UNIT
Bar graph display – Segmental and dot matrix display – X–Y recorders – magnetic tape
IV 9
recorders – Digital recording – Data loggers. Interference and screening – Electrostatic and
electromagnetic interference and earth loops.
VIRTUAL INSTRUMENTATION
UNIT
Historical perspective – Need of VI – Advantages of VI – Define VI – Block diagram &
V 9
Architecture of VI – Data flow techniques – Graphical programming in data flow – Comparison
with conventional programming
Total: 45
TEXT BOOKS
1. Albert D. Helfrick and William D. Cooper, “Modern Electronic Instrumentation and Measurement
Techniques”, 2nd edition, Prentice Hall of India, 2008.
2. Sanjay Gupta & Joseph John, “Virtual Instrumentation using LabVIEW”, 2nd edition, McGraw Hill, 2017.
REFERENCE BOOKS
1. Oliver, B.M. and Cage. J.M., “Electronic Measurements and Instrumentation”, 1st edition McGraw Hill,
2008.
2. Joseph J. Carr, “Elements of Electronic Instrumentation and Measurements”, 3rd Edition,Pearson
Education, 2003.
3. Bell, D.A., “Electronic Instrumentation and Measurements”, 3rd edition, Prentice Hall of India, 2013
4. Rajendra Prasad, “Electronic Measurements and Instrumentation”, 4th edition, Khanna Publishers,
2012.
5. Gupta, B.R., “Electronics and Instrumentation”, S. Chand Co. (P) Ltd., 2003.
30.11.2018 Regulations-2015R
U15EC917R L T P C
BIO-MEDICAL INSTRUMENTATION
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Summarize various aspects of bio-potential recording systems from the body.
2. Interpret the various temperature measurement methods and translate flow of blood as metrics.
3. Describe the special features of various types of measuring equipment based on heart.
4. Outline the objectives and working principles of the various diagnosis and radiological equipments.
5. Provide the applications of computer in medical field.
RECORDING INSTRUMENTS
UNIT
Electro-Physiology and Bio-potential Recording The Origin of Bio-potentials – Bio-potential
I 9
Electrodes – Biological Amplifiers – ECG – EEG – EMG – PCG – EOG – Lead Systems and
Recording Methods – Typical Waveforms and Signal Characteristics.
MEASUREMENT AND ANALYSIS TECHNIQUE
UNIT
Measurement of Blood Flow – Radiographic – Indicator Dye Dilution – Thermal Convection –
II Magnetic Blood Flow Rate – Ultrasonic Blood Flow meter – Sphygmomanometer – Blood Gas 9
Analyzer – Oximeter – Auto-Analyzers – Electrophoresis – Colorimeter – Spectrophotometer –
Flame Photometer.
THERAPEUTIC EQUIPMENTS AND PATIENT SAFETY
UNIT
Stimulators – Defibrillators – Pacemakers – Diathermy – Respirators – Blood Pumps Ventilator
III 9
– Haemo-dialysis Machine – Role of Laser in Health Care – Patient Safety – Macro – Micro
Shock – Preventive Measures – Earth-Free Patient Monitoring.
MEDICAL IMAGING
UNIT
X-Ray Imaging and CT Scan – Application and X-Ray Therapy – CAT Scan – MRI – PET –
IV Physics of Ultrasound – Ultrasound Imaging – A-Scan and B-Scan Displays – Multi Array 9
Scanning – M-Mode Scanning – Advantages and Disadvantages of Ultrasound Scanning
Thermal Imaging Systems.
COMPUTER APPLICATIONS IN MEDICAL FIELD
UNIT
Computer Applications in Medicine – Patient Monitoring System – Endoscopy Unit – Radio-pill 9
V – Telemedicine and Medical Informatics.
Total: 45
TEXT BOOK
1. Leislie Cromwell, “Biomedical instrumentation and measurement”, Prentice Hall of India, New
Delhi, 2015.
REFERENCE BOOKS
1. Khandpur, R.S., “Handbook of Biomedical Instrumentation”, TATA McGraw-Hill, New Delhi,
2015.
2. Ananda Natarajan.R, “Biomedical instrumentation and measurement”, Prentice Hall of India, New
Delhi, 2015.
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Computer Science and Engineering
Total Credits 24
Approved By
Chairperson, Computer Science and Engineering BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.B.Sathiyabhama Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Computer Science and Engineering, Sixth Semester BE CSE Students and Staff, COE
30.11.2018 Regulations-2015R
U15GE602AR PRINCIPLES OF MANAGEMENT 3 0 0 3
COURSE OUTCOMES
At the end of the course, students will be able to
Identify the organizational factors and roles of Management
Apply planning, forecasting and decision making in real time applications
Apply the concepts of organizing in an organization
Analyze the concepts of delegation of authority and Organization culture.
Apply the concepts of controlling in an organization
UNIT I INTRODUCTION 9
Definitions of Management-Scope of Management-Levels of Management-Functions and Roles of a manager-
Evolution of Management thought-Organisation and Environmental Factors-Forms of Business Organizations-
Corporate Social Responsibility-recent trends and challenges in global management scenario.
UNIT II PLANNING 9
Definition of Planning-Nature and purpose of planning-Planning process-Types of plans-Objectives-
Management of objective(MBO)-Management by exception-Types of strategies-Decision Making: definition
and process-Types of managerial decision-group decision making techniques-Decision making under different
conditions-forecasting and its techniques.
UNIT IV DIRECTING 9
Directing: nature and purpose-Motivation and Satisfaction-Motivation theories-job enrichment-definition of
leadership-elements of leadership-Leadership styles-leadership theories-Communication-process and barriers to
effective communication-Organization culture-Elements and types of culture-Managing cultural diversity.
UNIT V CONTROLLING 9
Process of controlling-Types of control-Budgetary and non-budgetary control techniques- MIS-Managing
productivity-Constant control-purchase control- Maintenance control-quality control-planning operations-
performance standards-Measurement of performance-Remedial actions.
TEXT BOOKS
1. Stephen P. Robbins & Mary Coulter, “Management”, Prentice Hall (India) Pvt. Ltd., 10th
Edition, 2009.
2. JAF Stoner, Freeman R.E and Daniel R Gilbert “Management”, Pearson Education, 6th
Edition, 2004.
30.11.2018 Regulations-2015R
REFERENCES
1. Stephen A. Robbins & David A. Decenzo & Mary Coulter, “Fundamentals of Management”
Pearson Education, 7th Edition, 2011.
2. Robert Kreitner & Mamata Mohapatra, “ Management”, Biztantra, 2008.
3. Harold Koontz & Heinz Weihrich “Essentials of management” Tata McGraw Hill,1998.
4. Tripathy PC & Reddy PN, “Principles of Management”, Tata Mcgraw Hill, 1999
30.11.2018 Regulations-2015R
U15CS601R PRINCIPLES OF COMPILER DESIGN 3 0 03
COURSE OUTCOMES
At the end of the course, students will be able to
TEXTBOOKS
1. Alfred V Aho, Monica S. Lam, Ravi Sethi and Jeffrey D Ullman, “Compilers – Principles, Techniques and
Tools”, 2nd Edition, Pearson Education, 2014.
30.11.2018 Regulations-2015R
REFERENCES
1. Randy Allen, Ken Kennedy, “Optimizing Compilers for Modern Architectures: A Dependence-based
Approach”, Morgan Kaufmann Publishers, 2002.
2. Steven S. Muchnick, “Advanced Compiler Design and Implementation, “Morgan Kaufmann Publishers -
Elsevier Science, India, Indian Reprint 2003.
3. Keith D Cooper and Linda Torczon, “Engineering a Compiler”, Morgan Kaufmann Publishers Elsevier
Science, 2004. 4. Charles N. Fischer, Richard. J. LeBlanc, “Crafting a Compiler with C”, Pearson
Education, 2008.
30.11.2018 Regulations-2015R
U15CS602R INTERNET OF THINGS 3003
COURSE OUTCOMES
At the end of the course, students will be able to
Describe the characteristics, physical and logical designs, domains and architecture
Differentiate M2M and IoT, SDN and NFV design methodologies
Identify the various IoT elements appropriate to the applications
Design a portable IoT using Arduino/Raspberry Pi incorporating cloud and analytics
Implement IoT applications for real-time environment
Total: 45 hours
30.11.2018 Regulations-2015R
TEXT BOOKS
1. Arshdeep Bahga, Vijay Madisetti, "Internet of Things-A hands-on approach", Universities
Press, 2015
2. Olivier Hersent, David Boswarthick, Omar Elloumi, “The Internet of Things: Key applications
and Protocols”, Wiley Publications 2nd edition , 2013
REFERENCES
1. Raj Kamal, “Internet of Things – Architecture and Design Principles”, Mc Graw Hill Education
Pvt. Ltd., 2017
2. Internet of Things and Data Analytics, Hwaiyu Geng, P.E, Wiley Publications, 2017
3. Manoel Carlos Ramon, ―Intel® Galileo and Intel® Galileo Gen 2: API Features and Arduino
Projects for Linux Programmers‖, Apress, 2014
4. Marco Schwartz, ―Internet of Things with the Arduino Yun‖, Packt Publishing, 2014
5. Adrian McEwen, Hakim Cassimally, “Designing the Internet of Things”, Wiley Publications,
2012
30.11.2018 Regulations-2015R
U15CS915R BUSINESS INTELLIGENCE 3003
COURSE OUTCOMES
At the end of the course, students will be able to
Total: 45 hours
TEXT BOOKS
1. RN Prasad and Seema Acharya, “Fundamental of Business Analytics”, Wiley India Pvt. Ltd, 2nd Edition,
2017
30.11.2018 Regulations-2015R
REFERENCES
1. John Boyer, Bill Frank, Brian Green, Tracy Harris, and Kay Van De Vanter “Business Intelligence
Strategy: A Practical Guide for Achieving BI Excellence”, IBM Corporation, 2010
2. R. Sharda, D. Delen, & E. Turban .Business Intelligence and Analytics. Systems for Decision Support,
10th Edition. ; Pearson/Prentice Hall, 2015
3. Swain Scheps “Business Intelligence for Dummies”, Wiley Publishing Inc, 2008
4. Cindi Howson “ Successful Business Intelligence:Secrets to making BI a killer App”, McGraw Hill,
2008
5. Elizabeth Vitt, Michael Luckevich, Stacia Misner “Business Intelligence: Making Better Decisions
Faster”, Microsoft Press, 2002
6. Elizabeth Vitt, Michael Luckevich, Stacia Misner “Business Intelligence: Making Better Decisions
Faster”, Microsoft Press, 2002
30.11.2018 Regulations-2015R
U15CS916R MOBILE DEVICE SOFTWARE DEVELOPMENT 3003
COURSE OUTCOMES
At the end of the course, the students will be able to
Total : 45 hours
TEXT BOOKS
1. Reto Meier, "Professional Android Application Development", Wiley, 2012
2. David Mark, Jack Nutting, Jeff LaMarche and Frederic Olsson, “Beginning iOS
6 Development: Exploring the iOS SDK”, Apress, 2013.
REFERENCES
1. http://developer.android.com/develop/index.html
2. Charlie Collins, Michael Galpin and Matthias Kappler, “Android in Practice”,
DreamTech, 2012
3. https://developer.apple.com/library/content/referencelibrary/GettingStarted/DevelopiOSAppsSwift/
30.11.2018 Regulations-2015R
U15CS919R SOFTWARE PROJECT MANAGEMENT 3 0 0 3
COURSE OUTCOMES
At the end of the course, students will be able to
Explore the roles of the project manager and opportunities in project management
Evaluate a project to develop the scope of work, provide accurate cost estimates and to plan
the various activities
Apply best practices to develop competencies and skills in planning and controlling projects to
ensure successful outcomes
Analyze the scheduling resources using various models
Identify suitable project management techniques for the managers.
30.11.2018 Regulations-2015R
U15CS603R COMPILER DESIGN LABORATORY 0042
COURSE OUTCOMES
At the end of the course, students will be able to,
Construct NFA and minimized DFA from a given regular expression using C program.
Use LEX and YACC tool to implement a lexical analyzer and parser for the grammar
Generate a code for a given intermediate code
LIST OF EXPERIMENTS
1. Construction of NFA.
2. Construction of minimized DFA from a given regular expression.
3. Use LEX tool to implement a lexical analyzer.
4. Use YACC and LEX to implement a parser for the grammar.
5. Implement a recursive descent parser for an expression grammar that
generates arithmetic expressions with digits, + and *.
6. Construction of operator precedence parse table.
7. Implementation of symbol table
8. Implementation of shift reduced parsing algorithms.
9. Construction of LR parsing table.
10. Generation of code for a given intermediate code.
11. Implementation of code optimization techniques.
Total: 60 hours
30.11.2018 Regulations-2015R
U15CS604R INTERNET OF THINGS LABORATORY 0 0 4 2
COURSE OUTCOMES
At the end of the course, students will be able to
Design a simple Internet of Things (IoT) application using Arduino/Raspberry Pi, sensors and actuators
Deploy an IoT application using Arduino/Raspberry Pi and appropriate sensor and actuator
Build an IoT system using mobile app as a mini project
LIST OF EXPERIMENTS
MINI PROJECT
8. Build an IoT system for the following suggested titles but not limited to:
9. Line follower robot
10. Smart weather monitoring system
11. Smart lighting system
12. Smart waste management system
13. Smart parking system
Total: 60 hours
30.11.2018 Regulations-2015R
U15CS605R CREATIVE AND INNOVATIVE PROJECT 0021
COURSE OUTCOMES
At the end of the course, students will be able to,
INTERNALS
a. First Review
I. Block Diagram of the proposed solution for a societal / creative problem
II. New Contribution in terms of modifications to existing algorithm or suggestion of new
ones
III. Detailed Design of each module
IV. Evaluation Metrics
V. Test Cases
b. Second Review
I. Implementation - Justifying pros and Cons
II. Coding - highlighting what has been reused and what is being written
c. Third Review
I. Test Runs ii. Performance Evaluation based on Metrics iii. Project
Documentation
EXTERNALS
Presentation, Viva-Voce, Report submission
Total:30 hours
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Information Technology
S. No Course Code Course Title Lecture Tutorial Practical Credit
Theory
1 U15IT601R Data Mining 3 0 0 3
2 U15IT602R Principles of Compiler Design 3 0 0 3
U15IT908R Elective – Graph Theory
3 U15IT909R Total Quality Management 3 0 0 3
U15IT914R Software Quality Assurance
U15IT916R Elective – Distributed Systems
4 U15IT918R Information Security 3 0 0 3
U15IT922R Machine Learning
U15CE1002R Open Elective - Disaster Management
U15CE1003R Energy Efficiency and Green Building
U15EE1006R Renewable Energy Systems 3 0 0
5 3
U15FT1001R Fundamentals of Fashion Design
U15ME1002R Renewable Energy Sources
U15IT930R Professional Elective- Big Data Technologies 2 0 2
Practical
6 U15IT603R Python Programming Laboratory 1 0 4 3
7 U15IT604R Software Design and Testing Laboratory 1 0 4 3
8 U15IT605R Internet of Things Laboratory 1 0 2 2
9 U15IT606R Mini Project - II 0 0 2 1
10 U15GE601BR Soft Skills and Aptitude - IV 0 0 2 1
Total Credits 25
Approved By
Chairperson, Information Technology BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.J.Akilandeswari Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to:-
HOD/Information Technology, Sixth Semester BE IT Students and Staff, COE
30.11.2018 Regulations-2015R
U15IT601R DATA MINING 3 0 0 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Apply the concepts of building a data warehouse and explore the various methods for implementing data warehouse
2. Explain the fundamental processes, concepts and techniques of data mining
3. Explain the concepts of association rule mining and classification and apply appropriate algorithm for the given data
4. Apply clustering algorithms to data sets
5. Investigate the different applications and trends of data mining.
UNIT I DATA WAREHOUSING 9
Data warehouse Overview: What is a data warehouse, A Multidimensional Model, Architecture, implementation, from
data warehouse to data mining.
Data cube technology: OLAP technology, attribute oriented induction.
UNIT II INTRODUCTION TO DATA MINING 9
Introduction – Data – Types of Data – Data Mining Functionalities – Kinds of Patterns – Classification of Data Mining
Systems – Data Mining Task Primitives – Integration of a Data Mining System with a Data Warehouse – Issues.
Data Preprocessing: Need to preprocess, data cleaning, data integration, data reduction, data transformation and
discretization, concept hierarchy generation.
UNIT III ASSOCIATION RULE MINING AND CLASSIFICATION 10
Mining Frequent Patterns, Associations and Correlations – Mining Methods – Mining Various Kinds of Association Rules
– Correlation Analysis – Constraint Based Association Mining Classification and Prediction - Basic Concepts - Decision
Tree Induction - Bayesian Classification – Rule Based Classification – Classification by Back propagation – Support
Vector Machines – Associative Classification - Lazy Learners – Prediction.
UNIT IV CLUSTERING 9
Cluster Analysis - Types of Data – Categorization of Major Clustering Methods– Partitioning Methods – Hierarchical
Methods - Density-Based Methods –Grid Based Methods – Model-Based Clustering Methods.
UNIT V APPLICATIONS AND TRENDS IN DATA MINING 8
Mining complex data types, other methodologies, Data Mining Applications, Social Impacts of data mining, Trends in
data mining,
Total: 45 hours
TEXT BOOK
1. Jiawei Han and Micheline Kamber, “Data Mining Concepts and Techniques”, Third Edition, Morgan Kaufmann,
2016.
REFERENCES
1. Alex Berson and Stephen J. Smith, “Data Warehousing, Data Mining & OLAP”, Tata Mc Graw Hill Edition,
Tenth Reprint 2007.
2. Pang-Ning Tan, Michael Steinbach and Vipin Kumar, “Introduction To Data Mining”, Pearson Education, 2007.
3. K.P. Soman, Shyam Diwakar and V. Ajay “, Insight into Data mining Theory and Practice”, Easter Economy
Edition, Prentice Hall of India, 2006.
4. G. K. Gupta, “Introduction to Data Mining with Case Studies”, Easter Economy Edition, Prentice Hall of India,
2006.
5. Soumendra Mohanty, “Data Warehousing Design, Development and Best Practices”, Tata McGraw Hill Edition,
2006.
30.11.2018 Regulations-2015R
U15IT602R PRINCIPLES OF COMPILER DESIGN 3 0 0 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Describe the phases of compilation process, purpose and implementation approach of each phase
2. Build NFA and DFA using the formalisms and techniques including regular expressions, and LEX tool
3. Explain the concepts of context free grammar, different parsing techniques and YACC tool
4. Apply semantic analysis of expressions and design code generation schemes
5. Implement various parsing, conversion, optimization and code generation algorithms for the design of a compiler
UNIT I INTRODUCTION TO COMPILERS 9
Introduction: Compilers, Analysis of the Source Program, The Phases of a Compiler, Cousins of the Compiler, The
Grouping of Phases, Compiler-Construction Tools
UNIT II LEXICAL ANALYSIS 9
Lexical Analysis: Need and role of lexical analyzer, Lexical errors, Input Buffering, Specification of Tokens,
Recognition of Tokens, A Language for Specifying Lexical Analyzers, Finite Automata, From a Regular Expression
to an NFA
LEX: Design of a Lexical Analyzer Generator.
UNIT III SYNTAX ANALYSIS 9
Syntax Analysis: Need and role of the parser, Context Free Grammars
Top Down parsing: Introduction, Recursive Descent Parser, Predictive Parser, LL (1) Parser
Bottom-Up Parsing: Introduction, Shift Reduce Parser, LR Parser, LR (0) item, Construction of SLR Parsing table,
Canonical LR Parsing, LALR Parser
YACC: Design of a syntax analyzer for a sample language.
30.11.2018 Regulations-2015R
U15IT603R PYTHON PROGRAMMING LABORATORY 1 0 4 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Develop python applications for real world problems.
2. Create applications using files and modules.
3. Develop applications using Django framework.
UNIT I INTRODUCTION TO PYTHON 5
Introduction: Features - Installing - Running, Syntax and Style: Variable Assignment - Memory Management, Python
Objects: Standard Types, Numbers, Sequences: Strings - Lists - Tuples, Dictionaries
UNIT II PYTHON FILES AND MODULE 4
Conditions and Loops. Files and Input/Output: File Objects and Built in functions - Functions
UNIT III INTRODUCTION TO DJANGO 6
Overview - Django Basics - Templates and static media - Models and Databases.
REFERENCES
1. Wesley J. Chun, “Core Python Programming”, Pearson, 2nd Edition, 2006.
2. Mark Lutz, “Learning Python”, O’Reilly Media, 4th Edition, 2003.
3. Allen Downey, “Think Python: How to Think Like a Computer Scientist”, Green tea Press, 2nd Edition.
4. Leif Azzopardi and David Maxwell, “ Tango With Django: A beginner’s Guide to Web Development With
nd
Python / Django” , 2 Edition, 2016.
LIST OF EXPERIMENTS
1. Develop programs to understand the control structures of python
2. Develop programs to learn different types of structures (list, dictionary, tuples) in python
3. Develop programs to learn concept of functions scoping, recursion and list mutability.
4. Develop programs for data structure algorithms using python – searching, sorting and hash tables.
5. Develop programs using Python Module
6. Develop programs to read and Write a text file
7. Learn to plot different types of graphs using PyPlot.
8. Develop programs using Django templates and media
9. Develop programs using Django Models
10. Develop programs using Django Database
Total: 75 hours
30.11.2018 Regulations-2015R
U15IT604R SOFTWARE DESIGN AND TESTING LABORATORY 1 0 4 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Analyze the problem and gather requirements there by designing UML diagrams
2. Test the system using automated tools and Junit
3. Reverse engineer source code back to UML models
UNIT I INTRODUCTION 4
Basic Definitions, Software Testing Principles, Origins of Defects, Defect Classes, The Defect Repository and Test
Design, Defect Examples
The Smarter Tester, Test Case Design Strategies, Using Black Box Approach to Test Case Design, Equivalence Class
Partitioning, Boundary Value Analysis, Other Black-box Test Design Approaches, Using White-Box Approach to Test
design, Test Adequacy Criteria, Coverage and Control Flow Graphs, Covering Code Logic, Paths: Their Role in White-
box Based Test Design, Additional White Box Test Design Approaches
EXPERIMENTS
Prepare the following documents for the projects listed below and develop the application using software engineering
methodology.
1. Program Analysis and Project Planning - Thorough study of the problem – Identify project scope, Objectives,
Infrastructure.
2. Software Requirement Analysis - Describe the individual Phases / Modules of the project, Identify deliverables.
3. Data Modeling - Use work products – Data dictionary, Use case diagrams and activity diagrams, build and test
class diagrams, Sequence diagrams and add interface to class diagrams.
4. Software Development and Debugging
5. Software Testing and Debugging- Develop a test plan and test case -Perform unit, integration, system and
acceptance testing on application software- Track bugs and defects- Use automated testing tools: LoadRunner,
WinRunner, Selenium and Neoload test, Junit.
6. Reverse Engineering.
30.11.2018 Regulations-2015R
SUGGESTED LIST OF APPLICATIONS
1. Student Marks Analyzing System
2. Pizza Ordering Systems
3. Online Ticket Reservation System
4. Course Registration System
5. Expert Systems
6. ATM Systems
7. Stock Maintenance
8. E-Mail Client System
9. Time table Generation System
10. GST calculator
Total: 75 hours
30.11.2018 Regulations-2015R
U15IT605R INTERNET OF THINGS LABORATORY 1 0 2 2
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Interface various sensors with Arduino and Raspberry pi boards.
2. Implement the control applications using Arduino programming
3. Experiment the different IoT applications with Raspberry pi using Python Programming.
UNIT I SENSOR AND ACTUATORS 3
Sensors –sensor types: Light, temperature, Force and sound- Actuators-Actuator types
UNIT II OVERVIEW OF IOT 3
An example of IoT Implementation- IoT Service Oriented Architecture- IoT Categories- IoT and Associated
Technologies- IoT challenges
UNIT III INTRODUCTION TO ARDUINO PROGRAMMING 3
Features of Arduino- Types of Arduino Board-Board Details-Arduino IDE Overview-Example programs
UNIT IV INTRODUCTION TO RASPBERRY PI 3
Raspberry Pi introduction - Basic Architecture -Raspberry Pi pin configuration –Basic set up for Raspberry Pi
UNIT V INTRODUCTION TO PYTHON PROGRAMMING 3
Python IDE- Data-types in Python- Functions in Python, Implementation of IoT with Raspberry Pi using Python
TEXT BOOK
1. Vijay Madisetti and Arshdeep Bahga, “Internet of Things (A HandsonApproach)”, 1st Edition,
VPT, 2014.
REFERENCES
1. Francis daCosta, “Rethinking the Internet of Things: A Scalable Approach to Connecting Everything”, 1st
Edition, Apress Publications, 2013.
2. Dr.K.V.K.K.Prasad, “Embedded Real Time Systems: Concepts, Design and Programming”, DreamTech
Publication, 2003.
3. Adrian McEwen, Hakim Cassimally, “Designing the Internet of Things”, Wiley Publications, 2012.
4. Introduction to IoT NPTEL video lectures by Dr. Sudip Misra, IIT Kharagpur 2017.
List of Experiments
1. Installation of Arduino IDE and Blink LED
2. Creating different LED Patterns using Loops and functions
3. Interfacing Arduino Nano with Joystick
4. Control the brightness of an LED by using PWM
5. Control servo motor using Joystick
6. Control LED, Buzzer and Relay from smart phone using Bluetooth Module.
7. Interface DHT 11 sensor with Arduino Nano and upload the humidity and temperature on the cloud.
8. Familiarization of Raspberry pi by blink LED program
9. Interface PIR sensor with Raspberry pi for motion detection.
10. Control the stepper motor using Raspberry pi based on specific input
11. Measure the humidity and temperature using DHT sensor and display the data readings on the LCD screen.
12. Build a secret code based security system using Raspberry pi
Total: 45 hours
30.11.2018 Regulations-2015R
U15IT908R GRAPH THEORY 3 0 0 3
COURSE OUTCOMES
UNIT – I INTRODUCTION 9
Graphs - Introduction - Isomorphism - Sub graphs - Walks, Paths, Circuits - Connectedness - Components - Euler Graphs
– operations on graph - Hamiltonian Paths and Circuits – The trravelling Salesman problem - Trees - Properties of trees -
Distance and Centers in Tree - Rooted and Binary Trees.
Spanning trees - Fundamental Circuits -Spanning Trees in a Weighted Graph - Cut Sets - Properties of Cut Set - All Cut
Sets - Fundamental Circuits and Cut Sets - Connectivity and Separability - Network flows - 1-Isomorphism - 2-
Isomorphism - Combinational and Geometric Graphs - Planer Graphs - Different Representation of a Planer Graph.
Incidence matrix - Submatrices - Circuit Matrix - Path Matrix – an application - Adjacency Matrix - Chromatic Number -
Chromatic partitioning - Chromatic polynomial - Matching - Covering - Four Color Problem - Directed Graphs - Types of
Directed Graphs - Digraphs and Binary Relations - Directed Paths and Connectedness - Euler Graphs - Adjacency Matrix
of a Digraph.
UNIT - IV ALGORITHMS I 9
Algorithms: Connectedness and Components - Spanning tree - Finding all Spanning Trees of a Graph -Set of Fundamental
Circuits - Cut Vertices and Separability - Directed Circuits.
UNIT - V ALGORITHMS II 9
Algorithms: Shortest Path Algorithm - DFS - Planarity Testing – Isomorphism – other graph theoretic algorithms -
performance.
Total: 45 hours
TEXT BOOK
1. Narsingh Deo, "Graph Theory: With Application to Engineering and Computer Science", PHI, 2003.
REFERENCES
1. R.J. Wilson, "Introduction to Graph Theory", Fourth Edition, Pearson Education, 2003.
30.11.2018 Regulations-2015R
U15IT909R TOTAL QUALITY MANAGEMENT 3 0 0 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Understand the Total Quality Management concepts
2. Understand the Total Quality Management principles
3. Understand the statistical approach for quality control.
4. Familiarize with various tools available to achieve Total Quality Management.
5. Create awareness about the ISO and QS certification process and its need for the industries.
UNIT I INTRODUCTION 9
Definition of Quality, Dimensions of Quality, Quality Planning, Quality costs - Analysis Techniques for Quality Costs,
Basic concepts of Total Quality Management, Historical Review, Principles of TQM, Leadership – Concepts, Role of
Senior Management, Quality Council, Quality Statements, Strategic Planning, Deming Philosophy, Barriers to TQM
Implementation.
UNIT II TQM PRINCIPLES 9
Customer satisfaction – Customer Perception of Quality, Customer Complaints, Service Quality, Customer Retention,
Employee Involvement – Motivation, Empowerment, Teams, Recognition and Reward, Performance Appraisal, Benefits,
Continuous Process Improvement – Juran Trilogy, PDSA Cycle, 5S, Kaizen, Supplier Partnership – Partnering, sourcing,
Supplier Selection, Supplier Rating, Relationship Development, Performance Measures – Basic Concepts, Strategy,
Performance Measure..
UNIT III STATISTICAL PROCESS CONTROL 9
The seven tools of quality, Statistical Fundamentals – Measures of central Tendency and Dispersion, Population and
Sample, Normal Curve, Control Charts for variables and attributes, Process capability, Concept of six sigma, New seven
Management tools.
UNIT IV TQM TOOLS 9
Benchmarking – Reasons to Benchmark, Benchmarking Process, Quality Function Deployment (QFD) – House of
Quality, QFD Process, Benefits, Taguchi Quality Loss Function, Total Productive Maintenance (TPM) – Concept,
Improvement Needs, FMEA – Stages of FMEA.
UNIT V QUALITY SYSTEMS 9
Need for ISO 9000 and Other Quality Systems, ISO 9000:2000 Quality System – Elements, Implementation of Quality
System, Documentation, Quality Auditing, TS 16949, ISO 14000 – Concept, Requirements and Benefits.
Total: 45 hours
TEXT BOOK
1. Dale H.Besterfiled, et al., “Total Quality Management”, Pearson Education, Inc. 2003. (Indian reprint 2004).
ISBN 81-297-0260-6.
REFERENCES
1. James R.Evans & William M.Lidsay, “The Management and Control of Quality”, (5th Edition), South-Western
(Thomson Learning), 2002 (ISBN 0-324-06680-5).
2. Feigenbaum.A.V. “Total Quality Management”, McGraw Hill, 2002.
3. Oakland.J.S. “Total Quality Management”, Butterworth – Hcinemann Ltd., Oxford.2005
4. Narayana V. and Sreenivasan, N.S. “Quality Management – Concepts and Tasks”, New Age International 2003.
5. Zeiri. “Total Quality Management for Engineers”, Wood Head Publishers, 2005.
30.11.2018 Regulations-2015R
U15IT914R SOFTWARE QUALITY ASSURANCE 3 0 0 3
COURSE OUTCOMES
At the end of the course the students will be able to:
1. Explain the factors and plans required for software development.
2. Implement the testing policies and tools used for software quality.
3. Describe the configuration procedure in developing software document.
4. Implement the software metrics to assess the cost of software quality.
5. Explain the benefits of using SQA standards and responsibilities of management
UNIT I INTRODUCTION TO SOFTWARE QUALITY & ARCHITECTURE 9
Need for Software quality – Quality challenges – Software quality assurance (SQA) – Definition and objectives –
Software quality factors- McCall‟s quality model – SQA system and architecture – Software Project life cycle
Components – Pre project quality components – Development and quality plans.
UNIT II SQA COMPONENTS AND PROJECT LIFE CYCLE 9
Software Development methodologies – Quality assurance activities in the development process- Verification &
Validation – Reviews – Software Testing – Software Testing implementations – Quality of software maintenance – Pre-
Maintenance of software quality components – Quality assurance tools – CASE tools for software quality – Software
maintenance quality – Project Management.
UNIT III SOFTWARE QUALITY INFRASTRUCTURE 9
Procedures and work instructions – Templates – Checklists – 3S developmenting – Staff training and certification
Corrective and preventive actions – Configuration management – Software change control – Configuration management
audit -Documentation control – Storage and retrieval.
UNIT IV SOFTWARE QUALITY MANAGEMENT & METRICS 9
Project process control – Computerized tools – Software quality metrics – Objectives of quality measurement – Process
metrics – Product metrics – Implementation – Limitations of software metrics – Cost of software quality – Classical
quality cost model – Extended model – Application of Cost model.
UNIT V STANDARDS, CERTIFICATIONS & ASSESSMENTS 9 Quality
management standards – ISO 9001 and ISO 9000-3 – capability Maturity Models – CMM and CMMI assessment
methodologies – Bootstrap methodology – SPICE Project – SQA project process standards – IEEE st 1012 & 1028 –
Organization of Quality Assurance – Department management responsibilities – Project management responsibilities
Total: 45 hours
.TEXT BOOK:
1. Daniel Galin, “Software Quality Assurance”, Pearson Publication, 2009.
REFERENCES:
1. Alan C. Gillies, “Software Quality: Theory and Management”, International Thomson Computer Press, 1997.
2. Mordechai Ben-Menachem “Software Quality: Producing Practical Consistent Software”, International
Thompson Computer Press, 1997.
30.11.2018 Regulations-2015R
U15IT916R DISTRIBUTED SYSTEMS 3 0 0 3
COURSE OUTCOMES
Total: 45 hours
TEXT BOOK
1. George Coulouris, Jean Dollimore, Tim Kindberg “Distributed Systems Concepts and Design” Fifth Edition
Pearson Education ,2013.
REFERENCES
1. A.S. Tanenbaum and M. V. Steen, "Distributed Systems: Principles and Paradigms", Second Edition, Prentice
Hall, 2016.
2. M.L.Liu, “Distributed Computing Principles and Applications”, Pearson Addison Wesley, 2004.
3. Distributed Systems, An Algorithm Approach, Sukumar Ghosh, Chapman&Hall/CRC, Taylor & Fransis Group,
2007.
4. Mukesh Singhal, “Advanced Concepts In Operating Systems”, McGrawHill Series in Computer Science, 2011.
30.11.2018 Regulations-2015R
U15IT918R INFORMATION SECURITY 3 0 0 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Explain the essential fundamentals of information security
2. Explain and apply the Laws and code of Ethics in Information Security
3. Evaluate vulnerability of an information system and establish a plan for risk management
4. Describe the access control mechanism used for user authentication and authorization
5. Maintain security infrastructure
UNIT I INTRODUCTION 9
An overview of Information Security, Critical Characteristics of Information, NSTISSC Security Model, Components of
an Information System, Securing the Components, Balancing Security and Access, The SDLC, The Security SDLC.
UNIT II SECURITY INVESTIGATION 9
Need for Security - Business Needs, Threats, and Attacks. Legal, Ethical and Professional Issues - Law and Ethics in
Information Security, International Laws and Legal Bodies, Ethics and Information Security.
UNIT III RISK MANAGEMENT AND SECURITY POLICY AND STANDARDS 9
Risk Management: Risk Identification, Risk Assessment, and Risk Control Strategies. Information Security Policy,
Standards and Practices, ISO 17799/BS 7799, NIST Models, VISA International Security Model.
UNIT IV SECURITY TECHNOLOGY 9
Access Control, Firewalls, Protecting Remote Connections, Intrusion Detection and Prevention Systems, Scanning and
Analysis Tools.
UNIT V IMPLEMENTING INFORMATION SECURITY AND SECURITY MAINTENANCE
9
Information Security Project Management, Technical and non-technical Aspects of Implementation, Security
Management Maintenance Models, Digital Forensics.
Total: 45 hours
TEXT BOOK
1. Michael E Whitman and Herbert J Mattord, “Principles of Information Security”, Vikas Publishing House, New
Delhi, 2003.
REFERENCES
1. Micki Krause, Harold F. Tipton, “Handbook of Information Security Management”, Vol 1-3, CRC Press LLC,
2004.
2. Stuart Mc Clure, Joel Scrambray, George Kurtz, “Hacking Exposed”, Tata McGraw-Hill, 2003.
3. Matt Bishop, “Computer Security Art and Science”, Pearson/PHI, 2002.
4. Charles P.Pfleeger, Shari Lawrence Pfleeger, ”Security in computing”, 4th Edition, Pearson Publication, 2012.
30.11.2018 Regulations-2015R
U15IT922R MACHINE LEARNING 3 0 0 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Explain the concepts of different types of learning and apply linear regression
2. Summarize the concepts of logistic regression and implement the same with python
3. Explain and apply the concepts of Neural networks and support vector machines
4. Evaluate the hypothesis based on factors like bias and variance
5. Explain the concepts of clustering, dimensionality reduction and anomaly detection.
UNIT I INTRODUCTION AND LINEAR REGRESSION 9
What is machine learning? – Supervised Learning – unsupervised learning – Linear Regression – cost function – gradient
descent algorithm – normal equation – implementation - Gradient descent for multiple variables – feature scaling –
learning rate – polynomial regression – normal equation – implementation
UNIT II LOGISTIC REGRESSION 9
Hypothesis representation – decision boundary – nonlinear decision boundaries – cost function – gradient descent –
advanced optimizations – multi class classification problems – python implementation – Regularization - Problem of
overfitting – cost function optimization for regularization – regularized linear regression – regularization with normal
equation - regularized logistic regression – python implementation
UNIT III NEURAL NETWORKS AND SUPPORT VECTOR MACHINES 9
Overview and summary – neurons and brain – model representation – artificial neural networks representation – example
– multiclass classification – cost function – back propagation algorithm – gradient checking – random initialization –
implementation – Support vector machines – optimization objective – cost function – large margin intuition – decision
boundary – kernels – adapting to nonlinear classifiers – implementation
UNIT IV ADVICE FOR APPLYING MACHINE LEARNING 9
Debugging a learning algorithm – evaluating a hypothesis – model selection and training, validation test sets – bias Vs
variance – regularization and bias/variance – learning curves machine learning system design
UNIT V OTHER TOPICS 9
Unsupervised learning – k-means algorithm – optimization objective – choosing number of clusters - Dimensionality
reduction – principle component analysis - Anomaly detection – algorithm – developing and evaluating the algorithm –
anomaly detection Vs supervised algorithm -Case study – recommender system – collaborative filtering - Large scale
machine learning – online learning – map reduce and parallelism.
Total: 45 hours
REFERENCES
1. Stanford's machine learning course presented by Professor Andrew Ng – online resource -
http://www.holehouse.org/mlclass/
2. James, G., Witten, D., Hastie, T., Tibshirani, R, “An Introduction to Statistical Learning with Applications in R”,
Springer, 2013.
3. Tom M. Mitchell, “Machine Learning”, 1st edition, McGraw Hill Education, 2017.
4. Ethem Alpaydın, “Introduction to Machine Learning”, The MIT Press, 2nd edition, 2013.
5. Christopher M. Bishop, “Pattern Recognition and Machine Learning”, Springer, 2007.
6. Sebastianraschka, “Python Machine Learning”, Packt Publishing Ltd., 2017.
30.11.2018 Regulations-2015R
U15IT930R BIG DATA TECHNOLOGIES 2 0 2 3
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Explain the need and challenges of Bg data and analytics
2. Apply and write jobs in Hadoop and map reduce framework
3. Create NoSQL database and apply CRUD operations in MongoDB
4. Create database and apply CRUD operations in Cassandra and Hive
5. Write PigLatin scripts for database maintenance and explore application areas and techniques applied in different
domains
UNIT I INTRODUCTION 9
Types of Digital Data – Introduction to Big Data - Big Data Analytics - classification of Analytics - Greatest Challenges
that Prevent Businesses from Capitalizing on Big Data - Top Challenges Facing Big Data - Why is Big Data Analytics
Important? - Data Science - Terminologies Used in Big Data Environment - Few Top Analytics Tools.
UNIT II TECHNOLOGIES, HADOOP AND MAP REDUCE 9
The big data technology landscape – NoSQL – Hadoop - Introduction to Hadoop - RDBMS versus Hadoop - RDBMS
versus Hadoop - Hadoop Overview - Hadoop Distributed File System - Processing Data with Hadoop - Managing
Resources and Application with Hadoop YARN - Hadoop Ecosystem – Introduction to Map reduce Programming
UNIT III MONGODB 9
Introduction to MongoDB - What is MongoDB? - Why MongoDB? - RDBMS and MongoDB - Data Types in MongoDB
– MongoDB Query Langauge
UNIT IV CASSANDRA AND HIVE 9
Introduction to Cassandra - Features of Cassandra - CQL Data Types – CQLSH – Keyspaces - CRUD – Collections –
Alter - Import and Export – querying system tables
Hive Architecture - Hive Data Types - Hive File Format - Hive Query Language- RCFILE Implementation – SERDE –
User Defined Functions
UNIT V PIG AND RECENT TRENDS 9
Introduction to Pig - The Anatomy of Pig - Pig on Hadoop - Pig Latin Overview - Data Types - Running Pig - Execution
Modes of Pig - HDFS Commands - Relational operators - Eval Function - Complex Data Type - User Defined Function -
parameter Substitution - Diagnostic Operator - Word Count Example - When to use Pig? - When NOT to use Pig? - Pig
versus Hive - Reporting tool – Trends – Case study
Total: 45 hours
TEXT BOOK
1. Seema Acharya and Subhashini C, “Big Data and Analytics”, Wiley India, 2014.
REFERENCES
1. Judith Hurwitz, Alan Nugent,Fern Halper, Marcia Kaufman, “Big data for dummies”, Wiley, 2013.
2. Chuck Lam, “Hadoop in action”, Manning Publications, 2010.
3. Michael Minelli, Michelle Chambers, and Ambiga Dhiraj, "Big Data, Big Analytics: Emerging Business
Intelligence and Analytic Trends for Today's Businesses", Wiley, 2013.
4. P. J. Sadalage and M. Fowler, "NoSQL Distilled: A Brief Guide to the Emerging World of Polyglot Persistence",
Pearson Education, 2012.
5. Tom White, "Hadoop: The Definitive Guide", Third Edition, O'Reilley, 2012.
6. E. Capriolo, D. Wampler, and J. Rutherglen, "Programming Hive", O'Reilley, 2012.
7. Eben Hewitt, "Cassandra: The Definitive Guide", O'Reilley, 2010.
8. Alan Gates, "Programming Pig", O'Reilley, 2011.
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Sona College of Technology, Salem
(An Autonomous Institution)
Courses of Study for B.E/B.Tech. Semester VI under Regulations 2015R (CBCS)
Branch: Fashion Technology
S. No Course Code Course Title Lecture Tutorial Practical Credit
Theory
1 U15GE602BR Principles of Management 3 0 0 3
2 U15FT601R Textile Testing and Quality Assurance in Apparel Production 3 0 0 3
3 U15FT602R Apparel Merchandising and Marketing 3 0 0 3
4 U15FT603R Industrial Engineering in Garment Production 3 0 0 3
U15FT905R Elective – Clothing care and garment finishing
5 U15FT906R Elective – Lean Manufacture in Apparel Industry 3 0 0 3
U15FT907R Elective – Sourcing and Sampling
U15CE1002R Open Elective – Disaster management
U15CE1003R Open Elective – Energy Efficiency and Green Building
6 U15CE1004R Open Elective – Municipal Solid Waste Management 3 0 0 3
U15EE1006R Open Elective – Renewable Energy Systems
U15IT1004R Open Elective – Python Programming
Practical
7 U15FT604R Textile Testing and Quality Control Laboratory 0 0 2 1
8 U15FT605R Computer- Aided Garment Design Laboratory 0 0 4 2
9 U15GE601BR Soft Skills and Aptitude - IV 0 0 2 1
Total Credits 22
Approved By
Chairman, Fashion Technology BoS Member Secretary, Academic Council Chairperson, Academic Council & Principal
Dr.M.B.Sampath Dr.R.Shivakumar Dr.S.R.R.Senthil Kumar
Copy to: -
HOD/Fashion Technology, Sixth Semester BE FT Students and Staff, COE
30.11.2018 Regulations-2015R
U15GE602BR PRINCIPLES OF MANAGEMENT 3003
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Explain the fundamental concepts and principles of management, including the basic roles, skills, and
functions of management along with the knowledge of historical development of management process
2. Explain the role of planning and understand the process of planning which includes setting of objectives,
strategies, policies and plans and be familiar with the steps in the forecasting and decision-making process
3. Outline the importance and different forms of organising function, explain different organisational charts
stating its authority delegation; Explain the function of staffing which involves managing organization
structure through proper and effective selection, appraisal and development of the personnel to fill the roles
assigned to the employers/workforce
4. Define leadership and identify traits of effective leaders and describe the behaviours that effective leaders
demonstrate; State the need for motivation and the types and theories of motivation; Define communication
and understand the communication process and list the barriers to effective communication
5. Explain the process and importance of the controlling function and the various organisational control
techniques; Provide an overview of the global business management practices and issues
30.11.2018 Regulations-2015R
Unit - IV Leadership, Motivation and Communication 9
Leadership styles and theories: Characteristics and functions of leadership, Types of leadership, Leadership
styles, Theories, roles of leader.
Motivation: Nature and importance of motivation, Types of motivation, Motivational theories.
Communication: Importance and characteristics, Formal and informal communication, Forms of
communication process, Barriers to effective communication, Overcoming the barriers.
TEXT BOOKS
1. Harold Kooritz and Heinz Weihrich, Essentials of Management, Tata McGraw-Hill, New Delhi,1998.
2. Joseph L. Massie, Essentials of Management, Prentice Hall of India, Pearson Fourth Edition, New
Delhi, 2003.
REFERENCES
1. Tripathy P. C. and Reddy P.N., Principles of Management, Tata McGraw-Hill, New Delhi, 1999.
2. Decenzo David and Robbins Stephen A. , Personnel and Human Resource Management, Prentice
Hall of India, New Delhi, 1996.
3. JAF Stomer, Freeman R. E and Daniel R Gilbert, Management, Pearson Education, Sixth Edition, New
Delhi, 2004.
30.11.2018 Regulations-2015R
U15FT601R TEXTILE TESTING AND QUALITY 3003
ASSURANCE IN APPAREL PRODUCTION
COURSE OBJECTIVE
To impart knowledge about the sampling techniques, different methods of testing procedure for fibre, yarn and
fabric and apparel., quality, inspection, quality assurance, control forms, production flow charts, quality control
aspects for fabrics and garment manufacturing processes, the standards and tolerances used in the garment
industries.
COURSE OUTCOMES
At the end of the study of the course the student should be able to,
1. Elucidate the various principles and methods are used for fibre and yarn properties testing.
2. Describe the different methods and procedure is used for fabric testing properties.
3. Discuss the basic terms and definition of apparel testing and methods of evaluation.
4. Discuss the basic terms and definition and procedures of Quality, Inspection Quality Assurance and Control
forms.
5. Elaborate on the quality control for Fabrics, QC in Garment Manufacturing Processes, Quality Standards
and Tolerances.
30.11.2018 Regulations-2015R
Quality assurance: Definition, differences between quality assurance and inspection, inspection agencies.
Control forms.
TEXT BOOKS
REFERENCES
1. J. E. Booth, “Principles of Textile Testing”, CBS Publishers and Distributors, New Delhi, 1996.
2. B. P. Saville, “Physical Testing of Textiles”, CRC Woodhead Publishing, New Delhi 1999.
3. V.K. Kothari, “Quality Control and Testing Management”, IAFL Publications, New Delhi, 1999.
4. Samuel Eilon, “Production Planning and Control”, Macmillan, New York, 1962.
5. Grover E. G. and Hamby D. S., “Hand Book of Textile Testing and Quality Control”, Wiley Eastern Pvt.
Ltd., New Delhi, 1969.
6. Pradip V. Mehta, “An Introduction to Quality Control for the Apparel Industry”, Dekker, 1992.
30.11.2018 Regulations-2015R
U15FT602R APPAREL MERCHANDISING AND 3003
MARKETING
COURSE OBJECTIVE
To impart knowledge on marketing, fashion merchandising, sourcing, pricing and types of document
preparation.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Describe the various types of market and advertising techniques involved in merchandising.
2. Discuss the types and functions of merchandising.
3. Explain the principles and techniques of fashion merchandising.
4. Discuss the technology involved in sourcing and material management systems.
5. Describe the various types of documents used for merchandising and export.
UNIT I Marketing 9
Apparel marketing: Definition, scope, functions and strategies of marketing.
Market Research: International market, retail and wholesale market and domestic market.
Advertising: Purpose, methods, types of advertising media, sales promotion methods.
UNIT II Merchandising 9
Apparel Merchandising: Definition, functions of merchandising division, roles and responsibilities of
merchandiser.
Types of Merchandising: Principles and techniques of apparel merchandising, retail merchandising, visual
merchandising, interfacing merchandising with production.
TOTAL: 45 hours
TEXT BOOKS
1. Moore Evelyn C., “Path for Merchandising- A Step by Step Approach”, Thames and Hudson Ltd.,
London, 2001.
2. Vijay Barotia, “Marketing Management”, Mangal Deep Publication, New Delhi, 2001.
REFERENCES
1. Jarnow J. and Dickerson K. G., “Inside the Fashion Business”, Prentice Hall, New Delhi, 1997.
1. Laine Stone and Jean Samples, “Fashion Merchandising”, McGraw Hill Books, Singapore, 1985.
30.11.2018 Regulations-2015R
U15FT603R INDUSTRIAL ENGINEERING IN 3003
GARMENT PRODUCTION
COURSE OBJECTIVE
To impart knowledge about the concept of industrial engineering, method study, the importance of the process
of work measurement, plant layout, planning tools and material handling systems related to the apparel industry.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Explain the importance of productivity and discuss the role of industrial engineer in the garment industry.
2. Discuss the various procedure and techniques involved in method study.
3. Explain the objectives and procedure to measure work content in the garment industry and also discuss its
importance.
4. Explain the importance of plant layout and analyse the lean manufacturing technology in the garment
industry.
5. Discuss the various planning, control tools and material handling systems used in garment industries.
UNIT I Introduction 9
Productivity: Production, Productivity, types of productivity, productivity measures, factors affecting
productivity in garment industry, measurement of line efficiency.
Industrial engineering: Definition, Benefits, Roles and responsibilities of industrial engineer in apparel
industry.
30.11.2018 Regulations-2015R
TEXTBOOKS
REFERENCES
30.11.2018 Regulations-2015R
U15FT604R TEXTILE TESTING AND QUALITY 0021
CONTROL LABORATORY
COURSE OBJECTIVE
To impart practical knowledge on determination of various yarn and fabric properties.
COURSE OUTCOMES
At the end of study of the course students able to,
1. Prepare the test specimen and determine the various yarn properties.
2. Prepare the test specimen and determine the various fabric properties.
3. Analyse the properties of given fabric sample.
LIST OF EXPERIMENTS
1. Determination of yarn count, lea strength and CSP. (1 session)
2. Determination of single yarn strength. (1 session)
3. Determination of yarn evenness grades using yarn-appearance boards. (1/2 session)
4. Determination of single yarn and double yarn twist. (1/2 session)
5. Determination of fabric tensile strength, seam strength and seam slippage properties. (1 session)
6. Determination of fabric abrasion resistance by using Martindale abrasion tester. (1 session)
7. Determination of fabric bursting strength by using hydraulic bursting tester. (1 session)
8. Determination of fabric tearing strength by using Elmendorf tearing tester. (1 session)
9. Determination of fabric stiffness and crease recovery angle. (1 session)
10. Determination of pilling tendency of fabric by using ICI pill box tester. (1 session)
11. Determination of drape coefficient of fabric by using drape meter. (1 session)
12. Determination of course length of knitted fabric by using course length tester. (1 session)
13. Determination of air permeability of fabric testing. (1 session)
14. Determination of wickabiliy of fabric. (1/2 session)
15. Analysis of Seam puckers. (1/2 Session)
TOTAL: 30 hours
30.11.2018 Regulations-2015R
Textile Testing and Quality Control Laboratory
1. Electronic Balance 1
Total 21
30.11.2018 Regulations-2015R
U15FT605R COMPUTER- AIDED GARMENT DESIGN 0042
LABORATORY
COURSE OBJECTIVE
To impart practical knowledge on pattern making, grading and marker planning through industrial CAD
software and developing design through commercial designing software.
COURSE OUTCOMES
At the end of the study of this course, the students will be able to,
1. Develop fashion drawings for children’s, ladies and men’s garments using a computer and related software.
2. Draft the patterns and grade it.
3. Generate marker plan.
LIST OF EXPERIMENTS
1. Practice of pattern making and grading software features. (2 sessions)
2. (i) Development of design, pattern and pattern grade for children’s frock.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for one-way fabric of varying fabric width. (1session)
3. (i) Development of design, pattern and pattern grade for children’s body suit.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for one-way fabric of varying fabric width. (1session)
4. (i) Development of design, pattern and pattern grade for baby romper.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for two-way fabric of 38” and 42” width. (1session)
5. (i) Development of design, pattern and pattern grade for ladies top.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for plaid fabric of 44” and 52” width. (1session)
6. (i) Development of design, pattern and pattern grade for ladies party wear.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for plaid fabric of 44” and 52” width. (1session)
7. (i) Development of design, pattern and pattern grade for ladies skirt.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for corduroy fabric of 38” and 60” width and develop a lay lot plan.
(1session)
8. (i) Development of design, pattern and pattern grade for men’s full-sleeve shirt.
(ii) Preparation of marker plan for checked fabric of 52” and 60” width.
(iii) Calculation of marker efficiency and development of lay lot plan. (1session)
9. (i) Development of design, pattern and pattern grade for men’s formal trousers.
(ii) Preparation of marker plan for pencil stripe fabric of 60” and 72” width.
(iii) Calculation of marker efficiency and development of lay lot plan. (1session)
30.11.2018 Regulations-2015R
10. (i) Development of design, pattern and pattern grade for men’s formal shorts.
(ii) Preparation of marker plan for pencil stripe fabric of 60” and 72” width.
(iii) Calculation of marker efficiency and development of lay lot plan. (1session)
11. (i) Development of design, pattern and pattern grade for men’s brief.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for single jersey knitted fabric of 30” dia and develop a lay lot plan.
(1session)
12. (i) Development of design, pattern and pattern grade for men’s vests.
(ii) Preparation of marker plan.
(iii) Calculation of marker efficiency for single jersey knitted fabric of 36” dia and develop a lay lot plan
(1session).
TOTAL: 60 hours
30.11.2018 Regulations-2015R
Computer- Aided Garment Design Laboratory
1. Computers-Pentium IV 30
2. Scanner 1
6. Adobe Photoshop 30
7. Corel Draw 30
Total 123
30.11.2018 Regulations-2015R
PROFESSIONAL ELECTIVE II
COURSE OBJECTIVE
To impart knowledge to the students on finishing equipment, industrial cleaning reagents, stain removal,
stiffening agents, functional washes and garment finishes.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Discuss topics related to finishing and form finishing equipment used in the garment industry with
illustrations.
2. Describe the different types of industrial laundry equipment and reagents and highlight the importance of
using industrial cleaning agents.
3. Give an account of the principles and practices of stain removal in textiles/garments and describe the
applications of stiffening agents to textiles.
4. Elaborate on the various types of modern washing machines and discuss the various functional washes
employed in garment processing.
5. Discuss different types of functional garment finishes prevailing today and give an insight into care
labelling systems for garment care.
30.11.2018 Regulations-2015R
UNIT V Functional Finishes and Care Labels 9
Functional Finishes: Crease/ wrinkle resistant finish, crease retentive finish, anti-bacterial finish, water
repellent finish, flame retardant finish, UV protection finish, mildew and moth proofing. Evaluation techniques
for the above finishes.
Care Labels: Importance of care label, various systems of care labelling, placement of labels on garments.
TOTAL: 45 hours
TEXT BOOKS
1. Dantyagi S., “Fundamentals of Textile and Their Care”, Oriental Longmans Ltd, New
Delhi, 1996.
2. Noemia D’Souza, “Fabric Care”, New Age International (P) Ltd. Publishers, Chennai, 1998.
REFERENCES
30.11.2018 Regulations-2015R
U15FT906R LEAN MANUFACTURE IN APPAREL INDUSTRY 3003
COURSE OBJECTIVE
To impart knowledge on the basics of lean manufacturing, various tools of lean manufacturing, strategy
formulation and implementation of lean in textile and apparel industries.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Explain the basics of lean manufacturing.
2. Describe the steps involved in lean implementation in garment industry and evaluation of its effectiveness in
the process.
3. Discuss about the various lean tools and its appropriateness for various textile industries.
4. Discuss the transparent flow of process and apply the lean tools in inventory control.
5. Analyze cases and develop strategic solutions for continuous improvement in garment industry.
UNIT I Introduction 9
Introduction: History of Lean manufacturing, toyota production system (TPS), Lean practices Vs traditional
business practices, three types of wasteful practices, 8 wastages, profit leakages due to wastages, over
production, higher inventory, waiting time, unnecessary conveyance and motion of materials, over processing,
rework, repairs, rejections, wastage of people talents.
Concept of 5s: Seiri, seiton, seisō, seiketsu, shitsuke. Housekeeping practices in spinning, weaving, processing
and garment industries for cleaner production.
30.11.2018 Regulations-2015R
TEXTBOOKS
1. Hobbs Dennis P, “Lean Manufacturing Implementation: A Complete Execution Manual for Any
Size Manufacturer”, Cengage Learning India Private Ltd, NewDelhi, 2009.
2. Rajmanohar T P,“Lean Product Development: Concept and Models”, ICFAI Press, 2009.
3. Desai, Aruna, “Lean manufacturing: Perspectives and Applications”, ICFAI Press, 2008.
REFERENCES
30.11.2018 Regulations-2015R
U15FT907R SOURCING AND SAMPLING 3003
COURSE OBJECTIVE
To impart knowledge of sampling procedure, importance of samples, raw materials and accessories sourcing for
the garment production.
COURSE OUTCOMES
At the end of this course the students will be able to,
1. Explain the concept of sample construction and basic standards on the product and process design.
2. Discuss the importance and functions of sampling.
3. Discuss the various aspects of sourcing.
4. Developing the expertise for appropriate selection of fabrics, trims and other materials.
5. Explain the concept of sourcing.
Unit I Sampling 9
Need and importance of samples, types of samples: proto type, photo type, fit sample, preproduction,
production, shipment, gold sealed, sales man sample, quality requirements of sampling and lead time, sampling
and costing: approvals.
TOTAL: 45 hours
30.11.2018 Regulations-2015R
TEXTBOOKS
1. E.Glock Ruth and I. Kunz Grace, "Apparel Manufacturing , Sewn Product Analysis",4th Edition,
Prentice Hall of India, 2005.
2. Jeannette Jamow, Kitty G.Dickerson, "Inside the Fashion Business", 7th Edition, Prentice,Hall of
India, 2003.
REFERENCES
30.11.2018 Regulations-2015R
Semester –VI U15 GE 601BR: SOFT SKILLS AND APTITUDE – IV L T P C Marks
(Common to all departments except Civil) 0 0 2 1 100
Course Outcomes
1. Demonstrate capabilities in job-oriented company selection processes using the hands-on approach
2. Solve problems of any given level of complexity in all areas of quantitative aptitude and logical
reasoning and score 70-75% marks in company-specific internal tests
3. Demonstrate advanced-level verbal aptitude skills in English and score 70-75% marks in company-
specific internal tests
Demonstrating Soft -Skills capabilities with reference to the following
topics:
1. Soft Skills a. Mock group discussions
b. Mock interviews
c. Mock stress interviews
Solving problems with reference to the following topics:
30.11.2018 Regulations-2015R
Open Elective
PREAMBLE
To
Building Services and Safety Regulations
Building services engineers are responsible for the design, installation, operation and monitoring of the
mechanical, electrical and public health systems required for the safe, comfortable and environmentally
friendly operation of modern buildings.
Building services engineers work closely with other construction professionals such as architects,
structural engineers and quantity surveyors. They influence the architecture of a building and play a
significant role on the sustainability and energy demand of a building.
Within building services engineering, new roles are emerging, for example in the areas of renewable
energy, sustainability, low carbon technologies and energy management.
With buildings accounting for around 50% of all carbon emissions, building services engineers play a
significant role in combating climate change.
30.11.2018 Regulations-2015R
L T P C
U15CE1001R BUILDING SERVICES AND SAFETY REGULATIONS
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
6. Describe the basics of electrical systems in buildings
7. Explain the principles of illumination and design of these systems
8. Describe the basics of thermodynamics, refrigeration principles and air conditioning systems
9. Discuss the fire safety regulations and installation of fire safety equipments and systems
10. Explain the water supply and sewerage systems for buildings
Thermodynamics- Heat- Temperature, measurement transfer- Change of state- Sensible heat- Latent heat of fusion, evaporation,
sublimation- saturation temperature- Super heated vapour- Subcooled liquid- Pressure temperature relationship for liquids-
Refrigerants- Vapour compression cycle- Compressors- Evaporators- Refrigerant control devices- Electric motors- Starters- Air
handling units- Cooling towers- Window type and packaged air-conditioners- Chilled water plant- Fan coil systems- Water piping-
Cooling load- Air conditioning systems for different types of buildings- Protection against fire to be caused by A.C. Systems
30.11.2018 Regulations-2015R
PREAMBLE
To
Disaster Management
We observe that during the last three decades, disaster both natural and man-made occur frequently and
their impact on life, live hoods, natural resources, property, infrastructure and facilities is very severe. Though
hazards and disasters could not be prevents, by taking preparedness activities, we can minimize their harmful
effects.
This course on disaster management emphasizes the need for disaster preparedness rather than
emergency response. It throws light on risk assessments, risk resolution and risk sharing and transfer. The
importance of community participation, building self-reliant resilient communities and awareness creation is
highlights in this course. Application of modern communication tools, remote sensing and GIS technologies in
search and resource operations and stream lining activities is elaborated. Way and means of financial
arrangements to carry out disaster management activities are discussed.
The physics of earthquake and tsunamis is explained. Safety measures against tsunamis are described.
The functioning and tsunamis warning system is described.
30.11.2018 Regulations-2015R
L T P C
U15CE1002R DISASTER MANAGEMENT
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. Distinguish various types of disasters, their causes and impacts on environment and society
2. Explain different phases of disaster management cycle
3. Assess vulnerability and prepare disaster risk reduction measures
4. Explain the vulnerability profile of India
5. Prepare hazard zonation maps for all types of hazards
Definitions: Disaster, Hazard, Vulnerability, Resilience, Disaster Preparedness - Classification of Disasters - Causes for Disasters -
Impacts of Disasters on Society, Environment, Economics, Politics, Health, etc. - Types of Vulnerability - The Sphere Project
Phases of Disaster Management Cycle - Culture of safety, prevention, mitigation, and preparedness - Community-based Disaster Risk
Reduction - Structural and Non-structural mitigation measures
Linkage between Development and Disasters -Impact of Development Projects on Environment and Society - Climate Change
Adaptation - IPCC - India’s Participation - Relevance of Indigenous Knowledge, Appropriate Technology, and Local Resources
Hazards-Vulnerability Profile of India - Components of Disaster Relief: Water, Sanitation, Food, Shelter, Health, etc. -National Policy
and Disaster Management - Institutional Framework for Disaster Management in India - Role of NGOs in Disaster Risk Reduction -
Role of Armed Forces during Disasters
UNIT-V DISASTER MANAGEMENT: APPLICATIONS AND CASE STUDIES AND FIELD WORKS 9
Application of Information Technology, Remote Sensing Technology, and Geographic Information System in Disaster Risk Reduction
- Case Studies on Landslide Hazard Zonation, Seismic Assessment of Buildings and Infrastructures, Drought Assessment, Coastal
Flooding Assessment , Storm Surge Assessment, Fluvial and Pluvial Floods Assessment, Forest Fires Assessment
TOTAL: 45 PERIODS
TEXT BOOKS:
REFERENCES:
1. Govt. of India: Disaster Management Act , Government of India, New Delhi, 2005
2. Government of India, National Disaster Management Policy,2009.
30.11.2018 Regulations-2015R
PREAMBLE
To
Energy Efficiency and Green Building
Green building, or sustainable design, is the practice of increasing the efficiency with which buildings
and their sites use energy, water, and materials, and of reducing impacts on human health and the
environment for the entire lifecycle of a building.
A sustainable building or green building is an outcome of a design philosophy which focuses on
increasing the efficiency of resource use-energy, water, and materials-while reducing building impacts
on human health and the environment during the building's lifecycle, through better siting, design and
construction.
Solar water heating further reduces energy costs. Onsite generation of renewable energy through solar
power, wind power, hydro power, or biomass can significantly reduce the environmental impact of
the building. Power generation is generally the most expensive feature to add to a building.
Green buildings are designed in such a way to reduce overall impact on environment and human health by:
Reducing trash, pollution and degradation of environment.
Efficiently using energy, water and other resources.
Protecting occupant health and improving productivity.
30.11.2018 Regulations-2015R
L T P C
U15CE1003R ENERGY EFFICIENCY AND GREEN BUILDING
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
1. To describe the importance of energy resources, its availability and conservation. To gain knowledge about heat loss & gain and
air quality requirements in buildings.
2. To study and identify the methods adopted to make the building as energy efficient.
3. To gain knowledge about Environmental impact assessment due to buildings and construction materials.
4. To study about different green building rating systems with real time examples.
5. To create awareness about clean development mechanism and the role of UNFCCC.
UNIT-I INTRODUCTION 9
Definition and concepts, Energy and water as a resource - Criticality of resources - Needs of modern living - Heat loss and heat gain in
buildings- thermal comfort improvement methods - other building comforts -indoor air quality requirements -electrical energy
conservation.
Zero Energy Building (ZEB) - Nearly Zero Energy Building (NZEB) - energy consumption - defining low energy buildings-
opportunities and techniques for energy conservation in buildings - water conservation - water management system - water efficient
landscaping - green roofing - rainwater harvesting - sanitary fixtures and plumbing systems - wa4stewater treatment and reuse -
process water strategies - adoption to sustainable resources, process and technologies- Energy Conservation Opportunities in Public
and Private Buildings.
Construction materials - Embodied energy, carbon content, and emission of CO2 ,SO2 and NOx of building materials, elements and
construction process- Current practice and low environmental impact alternatives.
Energy efficiency ratings & ECBC - 2007 - Various energy efficiency rating systems for buildings - LEED, BEE, & GRIHA - case
studies.
Clean Development Mechanism - CDM Benefits for energy conservation methodology and procedure - Eligibility Criteria - UNFCCC
- role of UNFCCC and Government of India.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Sustainable Building, Design Manual: Published by The Energy and Resources Institute, Darbari Seth block, IHC Complex,
Lodhi Road, New Delhi-110003.
2. KILBERT, Charles , (2008) Sustainable construction : Green Building Design and Delivery John Wiley and Sons.
3 BROWN, G.Z. and DEKAY, Mark, 2001. Sun, Wind & Light - Architectural Design Strategies, Second Edition , John
Wiley & sons, Inc.
REFERENCES:
1. ECBC Code 2007 ( Edition 2008) published by Bureau of Energy Efficiency, New Delhi
2. Bureau of Energy Efficiency Publications - rating System, TERI PUBLICATIONS .
3 GRIHA Rating System, LEED Publications
30.11.2018 Regulations-2015R
PREAMBLE
To
Municipal Solid Waste Management
Solid wastes represent one of the main environmental problems in India that needs to be dealt with. In order to
minimize environmental impacts and pave the way for a sustainable development, integrated and specific
actions need to be adopted and implemented. Due to rapid increase in the production and consumption
processes, societies generate as well as reject solid materials regularly from various sectors – agricultural,
commercial, domestic, industrial and institutional. The present course covers evaluation on the type and nature
of wastes, estimation of total volumes and assessment of handling, storage, transportation and disposal methods
to be adopted and the potential environmental impacts.
The overall objectives of the course:
To assess the activities involved for the proposed and determine the type, nature and estimated volumes of
waste to be generated.
To identify any potential environmental impacts from the generation of waste at the site;
To recommend appropriate waste handling and disposal measures / routings in accordance with the current
legislative and administrative requirements; and
To categories waste material where practicable (inert material / waste fractions) for disposal considerations
i.e. public filling areas / landfill.
30.11.2018 Regulations-2015R
L T P C
U15CE1004R MUNICIPAL SOLID WASTE MANAGEMENT
3 0 0 3
COURSE OUTCOMES (On completion of the course, the students will be able to):
Sources and types of solid wastes - Quantity - factors affecting generation of solid wastes; characteristics - methods of sampling and
characterization; Effects of improper disposal of solid wastes - public health effects. Principle of solid waste management - social and
economic aspects; Public awareness; Role of NGOs; Solid waste management rules 2016 - case studies.
On-site storage methods - Materials used for containers - on-site segregation of solid wastes - public health & economic aspects of
storage - options under Indian conditions - Critical evaluation of options.
Methods of Residential and commercial waste collection - Collection vehicles - Manpower- collection routes - Analysis of collection
systems; Transfer stations - Selection of location, operation & maintenance; options under Indian conditions - Field problems- solving.
Processing techniques and equipment; Resource recovery from solid wastes - Composting, incineration, Pyrolysis - Options under
Indian conditions - Case studies.
UNIT-V DISPOSAL 9
Dumping of solid waste; Sanitary landfills - Site selection, design and operation of sanitary landfills -Leachate collection and
treatment.
TOTAL: 45 PERIODS
TEXT BOOKS:
REFERENCES:
1. Manual on Municipal Solid Waste Management, CPHEEO, Ministry of Urban Development, Government of India, New Delhi,
2000.
2. Landreth R.E, and P.A and Rebers, “Municipal Solid Wastes -problems and Solutions”, Lewis Publishers, 2000.
3 Bhide A.D, and Sundaresan, B.B, “Solid Waste Management in Developing Countries”, INSDOC, 2003.
4. Ramachandra T.V, “Management of Municipal Solid Waste”, TERI press, New Delhi, 2009.
30.11.2018 Regulations-2015R
U15ME1001R RAPID PROTOTYPING 3003
COURSE OUTCOMES
At the end of this course the students will be able to,
1. Discuss the advantages and need of time compression in recent product development and explain the
product development steps.
2. Classify Rapid prototyping techniques (RP) and explain the liquid based RP process like STL and direct
metal laser sintering principles and also discuss its process parameters.
3. Explain the principle of working solid based RP process like fused deposition modeling and laminated
object manufacturing and also discuss its process parameters.
4. Discuss various powder based RP process like solid ground curing and 3D printer and its process
parameters and also explain the fundamentals of concept modellers’.
5. Explain advanced rapid tooling like laser engineered net shaping and ballistic particle manufacturing
and know the various software and STL file format for RP process and also discuss application of RP
process in medical field.
UNIT – I INTRODUCTION 9
Need for time compression in product development, Product development – conceptual design – development –
detail design – prototype – tooling.
UNIT – II CLASSIFICATION 9
Classification of RP systems, Stereo lithography systems – Principle – process parameters – process details –
machine details, Applications – Direct Metal Laser Sintering (DMLS) system – Principle – process parameters
– process details – machine details, Applications.
30.11.2018 Regulations-2015R
UNIT – V LENS & Rapid Tooling 9
Laser Engineering Net Shaping (LENS), Ballistic Particle Manufacturing (BPM) – Principle – Introduction to
rapid tooling – direct and indirect method, software for RP – STL files, Magics, Mimics – Application of Rapid
prototyping in Medical field.
TEXT BOOKS:
Text Books:
1. Pham D.T. & Dimov.S.S., “Rapid manufacturing”, Springer-Verlag, London, 2001.
2. Amitabha Ghosh, “Rapid Prototyping – A Brief Introduction”, Affiliated East –West
Press Private Limited, New Delhi, 2002
REFERENCES:
1. N.Hopkinson, R.J.M, Hauge, p m, dickens, “Rapid Manufacturing – An Industrial revolution for the
digital age”, Wiley, 2006
2. Ian Gibson, “Advanced Manufacturing Technology for Medical applications: Reverse Engineering,
Software conversion and Rapid Prototying”, Wiley, 2006
3. Paul F. Jacobs, Rapid Prototyping and Manufacturing, “Fundamentals of Stereolithography”, McGraw
Hill 1993.
4. Chua C.K, Leong K.F and Lim C.S, Rapid Prototyping: Principles and Applications, second edition,
World Scientific, 2003.
30.11.2018 Regulations-2015R
U15ME1002R RENEWABLE ENERGY SOURCES 3003
UNIT – I INTRODUCTION 9
World energy use – reserves of energy resources – energy cycle of the earth – environmental aspects of energy
Utilization – renewable energy resources and their importance.
30.11.2018 Regulations-2015R
UNIT – IV TIDAL ENERGY 9
Introduction – origin of tides – power generation schemes – Wave Energy – basic theory – wave power
Devices.
TEXT BOOKS:
1. Twidell John; Weir, Tony, “Renewable energy resources”, Taylor & Francis, 2010
2. Godfrey Boyle, “Renewable energy – power for a sustainable future”, Oxford
University Press, 2010
3. Kothari DP, Singal KC and Rakesh Ranjan, ‘Renewable Energy Sources and Emerging
Technologies’ PHI Learning Pvt. Ltd.2011.
4. S.A. Abbasi and Naseema Abbasi, “Renewable energy sources and their environmental impact”,
Prentice- Hall of India, 2001
REFERENCES:
1. Yogi Goswami, ‘Principles of Solar Engineering’ CRC Press, 2015, ISBN 10: 1466563788.
2. G D Rai, “Solar energy utilization”, Khanna Publishers, 2005.
3. G D Rai, “Non-conventional sources of energy”, Khanna Publishers, 2002.
4. MukundR.Patel, “Wind and Solar Power Systems”, CRC Press, Taylor and Francis, 2005.
5. T.N.Veziroglu, Alternative Energy Sources, Vol 5 and 6, McGraw Hill, 1978.
30.11.2018 Regulations-2015R
Course Code U15ME1003R L T P C
30.11.2018 Regulations-2015R
Learning Resources
Text Books:
1. K.S.Fu, R.C.Gonzalez and C.S.G lee, “Robotics control, Sensing, Vision and Intelligence” Mc Graw-
Hill, 2008.
2. Kozyrey, Yu. “Industrial Robotics”, MIR Publishers Moscow 1985.
3. Richard D, Klafter, Thomas A, Chmielewski, Micheal Negin, “Robotics Engineering – An integrated
Approach”, Prentice-Hall of India Pvt Ltd 1984.
4. Deb S.R, “Robotics Technology and Flexible Automation”, Tata Mc Graw-Hill, 1994
5. Timothy Jordanides et al, “Expert Systems and Robotics”, Springer-Verlag, New York may 1991.
6. Ashitava Ghosal,” Robotics fundamental concepts and Analysis,” oxford university press, 11 th
compression 2015.
7. Ramachandran Nagarajan,”Introduction To Industrial Robotics”, Pearson, 2016.
30.11.2018 Regulations-2015R
Course Code U15ME1004R L T P C
Course Outcomes
CO 2 Analyze industrial environment hygiene and prevent from diseases for human.
CO 3 Estimate industrial accidents like firing, explosion and identify safety controls.
CO 5 Learn the importance of safety training and the role of safety training and awareness etc.
Evolution of modern safety concept – safety audit – Concept of an accident investigation and reporting –
safety performance monitoring. Acts – factories act – 1948 – Statutory authorities – inspecting staff –
Tamilnadu Factories Rules 1950 under Safety and health – environment act – 1986 – Air act 1981, water
act 1974 – other acts. Safety in industries – General safety concepts, machine guarding, hazards in metal
removing process, welding process, cold and hot working process.
Physical Hazards – Noise, heat, recognition of chemical hazards-dust, fumes, mist, vapour, fog, gases.
Biological and Ergonomical Hazards-Basic concepts. Occupational Health-Concept and spectrum of health
– functional units and activities of occupational health services, pre-employment and post-employment
medical examinations – occupational related diseases, levels of prevention of diseases, notifiable
occupational diseases. Hazard assessment, procedure, methodology; safety audit, checklist analysis,
what-if analysis, safety review, Preliminary Hazard Analysis (PHA), human error analysis, hazard
operability studies (HAZOP), safety warning systems.
Fire properties of solid, liquid and gases – fire triangle – principles of fire extinguishing – active and
passive fie protection systems – various classes of fires – A, B, C, D, E – types of fire extinguishers –
Principles of explosion – Explosion Protection – Electrical Safety. Electrical Hazards – Primary and
Secondary hazards – concept of earthing – protection systems – fuses, circuit breakers and over load
relays – first aid.
30.11.2018 Regulations-2015R
Unit IV ERGONOMICS L9
Introduction to ergonomics: The focus of ergonomics, ergonomics and its areas of application in the work
system, a brief history of ergonomics, attempts to humanize work, modern ergonomics, future directions
for ergonomics. Anatomy, Posture and Body Mechanics: Some basic body mechanics, anatomy of the
sprine and pelvis related to posture, posture stability and posture adaptation, low back pain, risk factors
for musculoskeletal disorders in the workplace, behavioural aspects of posture, effectiveness and cost
effectiveness. Anthropometry and its uses in ergonomics, principles of applied anthropometry in
ergonomics. Applications of human factors engineering, man as a sensor, man as information processor,
man as controller – Man vs Machine – concepts of bio mechanics.
Learning Resources
Text Books:
1.Krishnan N.V., “Safety Management in Industry”, Jaico Publishing House, Bombay, 1997.
2.Hand book of “Occupational Safety and Health”, National Safety Council, Chicago, 1982.
REFERENCE BOOKS
2.Guidelines for Hazard Evaluation Procedures, Centre for Chemical Process Safety, AICHE 1992.
4.Derek, James, “Fire Prevention Hand Book”, Butter Worths and Company, London, 1986.
30.11.2018 Regulations-2015R
PREAMBLE
TO
ELECTRIC MOBILITY
Electrical propulsion systems date back virtually to the time of Faraday and a substantial body of
literature exists in the library of the Institution of Electrical Engineers from which it is safe only to consider a
small amount in relation to current road vehicle developments. Similarly a considerable quantity of works are
available on aerospace structural design which can be found in the library of the Royal Aeronautical Society,
and on automotive systems developments within the library of the Institution of Mechanical Engineers. With the
massive recent step-changes in capital investment, first in the build-up to battery-electric vehicle development,
then in the switch to hybrid drive engineering, and finally the move to fuel-cell development – it would be
dangerous to predict an established EV technology at this stage.
The development of internal combustion engine vehicles, especially automobiles, is one of the greatest
achievements of modern technology. Automobiles have made great contributions to the growth of modern
society by satisfying many of its needs for mobility in everyday life. The rapid development of the automotive
industry, unlike that of any other industry, has prompted the progress of human society from a primitive one to
a highly developed industrial society. The automotive industry and the other industries that serve it constitute
the backbone of the word’s economy and employ the greatest share of the working population. However, the
large number of automobiles in use around the world has caused and continues to cause serious problems for the
environment and human life. Air pollution, global warming, and the rapid depletion of the Earth’s petroleum
resources are now problems of paramount concern.In recent decades, the research and development activities
related to transportation have emphasized the development of high efficiency, clean, and safe transportation.
Electric vehicles, hybrid electric vehicles, and fuel cell vehicles have been typically proposed to replace
conventional vehicles in the near future.
30.11.2018 Regulations-2015R
U15EE1001R ELECTRIC MOBILITY 3003
COURSE OUTCOMES
At the end of this course the students will be able to,
1. Explain the need for electric and hybrid vehicles fundamentals.
2. Describe the energy sources of types of batteries and fuel cells.
3. Discuss the various types of motor control design features of Electric vehicle.
4. Illustrate the design of various considerations of electric vehicle.
5. Explain the hybrid design vehicle technology.
UNIT -I INTRODUCTION 9
Need for electric and hybrid vehicles-Comparative study of electric and hybrid vehicles-Limitations of electric vehicles-
Petroleum resources- Global warming-Fuel cell vehicles-Optimum solutions for motor, drives and batteries.
Battery Parameters-Power requirement of electric vehicles- Different types of batteries - Lead acid- Nickel based-Sodium
based-Lithium based- Metal Air based. Battery charging- Charger design- Quick charging devices- Battery Modeling.
Different type of energy storage – Solar, wind, compressed fluid. Fuel Cell- Fuel cell characteristics- Fuel cell types-
Hydrogen fuel cell- Connecting cell in series.
Characteristic of permanent magnet and separately exited DC motors.– Basic Principles of BLDC Motor Drives-
Performance Analysis and Control of BLDC Machines- Inverters – DC and AC motor speed controllers
Aerodynamic-Rolling resistance- Transmission efficiency- Grading Resistance -Vehicle mass- Electric vehicle chassis
and Body design considerations- Heating and cooling systems- Controllers- Power steering- Vehicle Performance
Types of Hybrid- Series, parallel, parallel - Advantages and Disadvantages- Hybrid drive prospects-
Hybrid technology case studies - Production hybrid-drive cars -Hybrid passenger and goods vehicles.
30.11.2018 Regulations-2015R
REFERENCE BOOKS:
1.Iqbal Husain, “ Electric and Hybrid Vehicles-Design Fundamentals”, CRC Press, 2003
2.Jack Erjavec, “Hybrid, Electric & Fuel-Cell Vehicles”, Delmar, Cengage Learning, 2013
3.James Larminie and John Lowry, “Electric Vehicle Technology Explained “ John Wiley &
Sons, 2003
30.11.2018 Regulations-2015R
PREAMBLE
TO
ELECTRIFICATION IN BUILDING CONSTRUCTION
Engineers are responsible for the design, installation, and operation and monitoring of the mechanical,
electrical and public health systems required for the safe, comfortable and environmentally friendly operation of
modern buildings.
Engineers work closely with other construction professionals such as architects, structural engineers and
quantity surveyors. They influence the architecture of a building and play a significant role on the sustainability
and energy demand of a building. Within building services engineering, new roles are emerging, for example in
the areas of renewable energy, sustainability, low carbon technologies and energy management.
30.11.2018 Regulations-2015R
U15EE1002R ELECTRIFICATION IN BUILDING CONSTRUCTION 3003
COURSE OUTCOME
At the end of the course the student will be able to
1. Draw the layout of electrical wiring and explain various earthing methods.
2. Explain the construction and operation of transformer.
3. Explain the need for protection and analyze the selection of circuit breakers.
4. Outline the fundamentals of illumination.
5. Design the lighting schemes required for various types of buildings.
UNIT II TRANSFORMERS 9
Principle of operation – Construction – Classification of transformers – EMF equation – Transformation ratio –
Three phase transformers – Types of connections.
References:
1. Philips.“Lighting in Architectural Design”, McGraw-Hill, New York, 1997.
2. Hopkinson R.G. and Kay J.D., “The Lighting of buildings”, Faber and Faber, London, 1969.
3. B.L.Theraja and A.K.Theraja , ”A Text Book of Electrical Technology” , S.Chand Publisher Vol2,2014.
30.11.2018 Regulations-2015R
U15EE1003R EMBEDDED SYSTEMS AND IoT 3003
PREAMBLE
Internet of things is a new revolution of the Internet that is rapidly gathering thrust driven by the advancements
in networks, devices, wireless communications and networking technologies. The explosive growth of the
“Internet of Things” is changing our world and the rapid drop in price for typical IoT components is allowing
people to innovate new designs and products at home. An embedded system is a dedicated, computer-based
system for an application or product. An embedded system may either be an independent system or a part of a
larger system. In this course, the students will learn the fundamentals of embedded systems and the devices and
communication buses for devices network. The fundamentals of IoT with typical IoT devices, interfacing
between physical world and the device will also be covered.
Apply their knowledge to build real time IoT applications for industries with the basics in programming
Differentiate the buses for serial and parallel communication in Embedded system applications
COURSE OUTCOMES
At the end of this course the students will be able to,
30.11.2018 Regulations-2015R
UNIT II PYTHON & ELEMENTS OF IoT 9
Python –Introduction – Python Data types & Data Structures – Control flow – Functions – Modules – Packages
– File Handling – Date/Time operations – Classes –Simple examples -
Sensors and actuators – Analog sensors, Digital sensors-examples – Participatory Sensing, Industrial IoT and
Automotive IoT – Actuator- Communication modules – Zigbee - LoRa - RFID
TEXT BOOKS
1. P. Rajkamal, ‘Embedded System – Architecture, Programming and Design’, Tata McGraw Hill, 2010.
2. Arshdeep Bahga, Vijay Madisetti, "Internet of Things-A hands-on approach", Universities Press, 2015.
REFERENCES:
6. Raj Kamal, “Internet of Things – Architecture and Design Principles”, Mc Graw Hill Education Pvt.
Ltd., 2017
7. Internet of Things and Data Analytics, Hwaiyu Geng, P.E, Wiley Publications, 2017
8. Manoel Carlos Ramon, ―Intel® Galileo and Intel® Galileo Gen 2: API Features and Arduino Projects
for Linux Programmers‖, Apress, 2014
9. Marco Schwartz, ―Internet of Things with the Arduino Yun‖, Packt Publishing, 2014
10. Adrian McEwen, Hakim Cassimally, “Designing the Internet of Things”, Wiley Publications, 2012
11. Olivier Hersent, David Boswarthick, Omar Elloumi, “The Internet of Things: Key applications and
Protocols”, Wiley Publications 2nd edition , 2013
30.11.2018 Regulations-2015R
PREAMBLE
TO
ENERGY CONSERVATION AND MANAGEMENT
Energy is one of the most important resources to sustain our lives. At present we still depend a lot on
fossil fuels and other kinds of non-renewable energy. The extensive use of renewable energy including solar
energy needs more time for technology development. In this situation Energy Conservation (EC) is the critical
needs in any countries in the world.
Energy saving is important and effective at all levels of human organizations – in the whole world, as a
nation, as companies or individuals. Energy Conservation reduces the energy costs and improves the
profitability.
Energy costs are often treated as a fixed overhead by organisations. But, by taking the right approach to
energy management it is possible to make considerable savings. Successful energy management must combine
an effective strategy with the right practical interventions. Many organisations would like to save energy, but
they need to make energy management an integral part of running the organisation to ensure success. Energy
Management is very important for the management of factories/companies, and Energy Conservation is one of
its major topics.
30.11.2018 Regulations-2015R
U15EE1004R ENERGY CONSERVATION AND MANAGEMENT 3 0 0 3
COURSE OUTCOMES
Classification of Energy – Purchasing Power Parity – Energy Security – Strategy to meet future energy
requirements – Objectives and features for electricity act 2003 – Energy efficiency standards and labeling –
Study of Global and Indian primary energy reserves – Study of energy scenario for India – Energy and
environment – Global environmental issues – Types of Energy – Electrical and Thermal energy basics – Energy
units and conversions.
Definition and objectives of energy management and audit – Need for energy audit – Types of energy audit –
Methodology for conducting detailed energy audit – ENCON opportunities and measures – Energy audit report.
Energy costs – Benchmarking – Energy performance – Fuel and Energy substitution – Instruments and metering
for energy audit – Basic principles, components of material and energy balance – Sankey diagram – Financial
analysis terms – Payback period, ROI, NPV, IRR.
Introduction – Terms in Lighting and Illumination – Light sources - Lamp types – Arc Lamps, Vapour lamps –
Incandescent lamp, Fluorescent lamp – Energy saving lamps – CFL, LED – Lighting design for interiors –
Indoor and outdoor lighting schemes – Energy saving opportunities – Energy efficient lighting controls.
Energy conservation building code (ECBC) – Compliance approaches – ECBC guidelines on Building
envelope, HVAC system, Service hot water, Water pumps – Energy consumption in Escalators and Elevators –
Building Energy Management Systems – Star ratings – Energy Efficiency Measures in AC and Lighting system.
30.11.2018 Regulations-2015R
UNIT- V ENERGY EFFICIENT OPPORTUNITIES IN UTILITIES 9
Introduction to Compressed air system components – Heat transfer loops in refrigeration systems – Standards
and labelling of room air conditioners – Introduction to Fans, Blowers and Compressors – Types of pumps,
Pump curves – Efficient operation of pumps – Components of cooling towers and its efficient operation -
Introduction to DG set system.
Energy Efficiency and energy savings in Compressed Air System, HVAC system, Fans and Blowers, Pumping
system, Cooling towers, and DG sets.
REFERENCE BOOKS:
30.11.2018 Regulations-2015R
PREAMBLE
TO
INSTRUMENTATION SYSTEMS
Instrumentation System for the engineering to focused on the principle and operation of measuring
instruments that are used in design and configuration of automated systems in electrical, pneumatic domains
etc. They typically work for industries with automated processes. The term “system” refers to a set of
components that are connected to form and act as an entire unit. An instrumentation system is collection of
instruments used to measure, monitor, and control a process. There are many applications of instrumentation
systems, within technological areas as large as those associated with communications, defence, transportation,
education, industrial manufacturing and research and development, and chemical and other process industries.
30.11.2018 Regulations-2015R
U15EE1005R INSTRUMENTATION SYSTEMS 3003
COURSE OUTCOMES:
At the end of the course the student will be able to,
1. Discuss the static and dynamic characteristics and define various errors.
2. Derive torque equation for various types of meters
3. Calculate R, L and C using bridges.
4. Explain storage and display device
5. Discuss the various types of transducers
UNIT I INTRODUCTION 9
Functional elements of an instrument – Static characteristics: True value, Static error, static correction,
Reproducibility, Drift, Repeatability, Noise, Signal to Noise ratio, Accuracy and precision, Sensitivity,
Linearity, Threshold, Dead Zone, Resolution. Dynamic Characteristics: Speed of response, Fidelity, Lag,
Dynamic error – Errors: Gross error, Systematic error and Random error – Statistical evaluation of
measurement data – Standards and calibration.
UNIT II ELECTRICAL AND ELECTRONICS INSTRUMENTS 9
Principle and operation of analog voltmeters and ammeters: Moving Iron; attraction and repulsion type
instruments. Moving coil Instruments; PMMC, Dynamometer type, Torque equation – Single phase
Dynamometer type watt meter: Toque expression, Errors – Single phase Induction type energy meters –
Measurement of Power using Instrument transformers – Single Phase Electrodynamometer Power factor meters
and Weston Frequency meter.
UNIT III BRIDGES & INTERFERENCE TECHNIQUES 9
D.C bridges: Wheatstone bridge, Kelvin double bridge, Megger – A.C bridges: Maxwell’s, Anderson, Schering
- Interference & screening – Multiple earths and earth loops - Electrostatic and electromagnetic interference –
Grounding techniques.
UNIT IV STORAGE AND DISPLAY DEVICES 9
Magnetic disk and tape – Recorders, digital plotters and printers, CRT display, digital CRO, LED, LCD,
Memory cards & dot matrix display.
UNIT V TRANSDUCERS AND DATA ACQUISITION SYSTEMS 9
Classification of transducers – Selection of transducers – Resistive, capacitive & Inductive transducers –
Measurement of temperature – RTD, thermistors and thermocouples - Piezoelectric transducers - Digital
transducers – optical encoders - Elements of data Acquisition system – A/D, D/A converters.
Lecture: 45, Tutorial: 0, Total: 45Hrs
30.11.2018 Regulations-2015R
TEXT BOOKS
1. A.K. Sawhney, “A Course in Electrical & Electronic Measurements &Instrumentation”, DhanpatRai and
Co, 2012.
2. RK Rajput, “Electrical Measurements and Measuring Instruments” S.Chand and Company Pvt. Ltd.,
Second Edition, 2013
REFERENCE BOOKS
1. E.O. Doebelin, “Measurement Systems – Application and Design”, Tata McGraw Hill Publishing
company, 2003.
2. A.J. Bouwens, “Digital Instrumentation”, Tata McGraw Hill, 1997.
3. D.V.S. Moorthy, ‘Transducers and Instrumentation’, Prentice Hall of India Pvt Ltd, 2007.
4. H.S. Kalsi, “Electronic Instrumentation”, Tata McGraw Hill, II Edition 2004.
5. J. B. Gupta, “A Course in Electronic and Electrical Measurements”, S. K. Kataria&Sons,Delhi, 2003.
30.11.2018 Regulations-2015R
PREAMBLE
TO
RENEWABLE ENERGY SYSTEMS
Energy is an important source of all technological developments as well as for all basic needs. The usage of
renewable energy sources are the only way for sustainable development and future energy requirements.
Renewable energy encourages the generation of electricity without any environmental impact and improves the
economic growth of the country.
By choosing this elective the students will be able to know the importance of renewable energy sources for
power generation. And also they could understand how the fossil fuels are made an impact on environmental
issues. They will be familiar with the following
1. Concept of solar energy power production and solar photovoltaic cells and the application of solar PV
system and Bio Mass power generation system.
2. Principle of conversion of wind energy in to electric energy
3. Working of geothermal and hydro power stations.
4. Principle of the conversion of tidal and wave energy in to electric energy.
5. The emerging technology of power generation.
After completion of this subject students will know how the energy can be produced locally. This knowledge
would provide an opportunity to install small capacity power generation units independently for their needs.
30.11.2018 Regulations-2015R
U15EE1006R RENEWABLE ENERGY SYSTEMS 3003
COURSE OUTCOMES
At the end of this course the students will be able to,
6. Describe the power demand scenario in world level and impact of various renewable energy sources in
satisfying power demand.
7. Explain the principle of operation and the application of solar system.
8. Outline in the components and to find the suitability based on the performance of wind energy and
Conversion system, biomass energy system
9. Describe the principle of operation and the application of geo thermal power tidal power generation
scheme, wave energy and OTEC scheme.
10. Illustrate the emerging energy generation systems of MHD, Thermal and fuel cells applications.
UNIT – I INTRODUCTION 9
World energy futures–Energy sources and their availability – Energy cycle of the earth – environmental aspects
of energy utilization – Energy plantation- Renewable energy resources and their importance- Prospects of
Renewable energy sources.
UNIT – II SOLAR ENERGY SYSTEMS 9
Introduction –Solar radiation and measurements-Solar energy collectors-solar energy storage systems- Solar
pond and applications- Applications of solar energy: solar pumping, solar cooking, solar distillation and solar
greenhouse.
UNIT – III WIND AND BIOMASS ENERGY SYSTEMS 9
Introduction – Wind Energy conversion- Wind speed and power relation – Power extracted from wind – wind
distribution and wind speed predictions – types of Wind power systems.
Bio mass conversion technologies-Biogas generation-Types of biogas plants-Bio gas from plant wastes-
Utilization of Bio gas and applications.
30.11.2018 Regulations-2015R
UNIT – V EMERGING ENERGY SYSTEMS 9
Magneto Hydro Dynamic (MHD) Power Generation- MHD systems and its operation. Thermo Electric power
generation- Basic principle- Thermo electric power generator.
Thermonuclear fusion energy-Nuclear fusion and reactions- Advantages. Fuel cell- classification of fuel cells-
Fuel cell based electrical power generation scheme- Applications.
Lecture: 45; Tutorial: 0; Total: 45
TEXT BOOKS:
1. Rai, G.D., “Non-Conventional Energy Sources”, Khanna Publishers, Sixth Edition 2017.
2. Khan, B.H, Non- Conventional Energy Resources”, Mc. Graw Hill Education Ltd, third reprint 2017.
REFERENCE BOOK
1. Rao S. Paruklekar,B.B, “Energy Technology – Non Conventional, Renewable and Conventional”,
KhannaPublishers,1994.
30.11.2018 Regulations-2015R
ANALOG AND DIGITAL COMMUNICATION
PREAMBLE:
To introduce the basic concept of conventional analog communications systems and to expand the
knowledge of modern digital, optical, satellite and cellular mobile communication systems.
To understand this technology, the basic concepts associated with analog and digital communication is
to be focused. The course is related to the generation and demodulation of various techniques. Performance
parameters of analog and digital communication system are compared. It covers the infrastructure development
for mobile based wireless communication in the multiple user environments.
30.11.2018 Regulations-2015R
REFERENCES BOOKS
rd
1. H.Taub.,D L Schilling,O Saba ,"Principles of Communication", 3 edition, McGraw-Hill 2008.
2. B.P.Lathi,"Modern Analog and Digital Communication systems", 4th edition, Oxford University Press,
2017.
3. Blake, "Electronic Communication Systems", 2nd edition,Thomson Delmar Publications, 2012.
30.11.2018 Regulations-2015R
BIOMEDICAL INSTRUMENTATION AND MEASUREMENTS
PREAMBLE
With technology advancing at such a rapid pace, it is no wonder that the developments in science and engineering
are being integrated into the medical sector. Any new knowledge of living systems gained through analytical techniques
based on engineering sciences contributes to the progress of medicine. This integration has given rise to the
interdisciplinary field of biomedical engineering.
Biomedical engineering refers to the field of study that merges biology and engineering. This unique,
interdisciplinary field allows covering a wider range of subjects, where the in-depth understanding of engineering can be
applied to solve medical and biological problems. Biomedical Engineering bridges the gap between engineering and
medicine, seamlessly combining the design and problem solving skills of engineering with medical and biological
sciences in order to improve healthcare diagnosis, monitoring and therapy. This area uses electronics and computer
science to create devices that are used to diagnose and treat diseases.
30.11.2018 Regulations-2015R
TEXT BOOK
1. Leislie Cromwell, “Biomedical instrumentation and measurement”, Prentice Hall of India, New
Delhi, 2015.
REFERENCE BOOKS
1. Khandpur, R.S., “Handbook of Biomedical Instrumentation”, TATA McGraw-Hill, New Delhi,
2015.
2. Ananda Natarajan.R, “Biomedical instrumentation and measurement”, Prentice Hall of India,
New Delhi, 2015.
30.11.2018 Regulations-2015R
ELECTRONICS AND MICROPROCESSOR
PREAMBLE:
Electronics and Microprocessor has become essential part in the mechanical field. During recent years there has
been significant improvement in the field of robotics and automobile technology. The rapid growth of luxury cars,
robotics which involves many features using electronics and microprocessors. New systems such as GPS, accident
control, auto gear system, and many more features are integrated with vehicles.
The course is related to the development of mechanical and automobile sectors. The semiconductor devices are
used to know the concepts of semiconductor theory and junction diodes. The transistor amplifier and digital electronics
are used to develop the projects in the field of mechanical engineering. Interfacing concepts are used to develop a system
based on the microprocessors. This course will provide important knowledge to graduate students who wish to work in the
field of industrial automation.
L T P C
U15EC1003R ELECTRONICS AND MICROPROCESSOR
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Apply the concepts of semi-conductor diodes and rectifiers.
2. Illustrate the models of transistor and its applications
3. Apply and solve binary number systems and logic gates.
4. Analyze 8085 microprocessor and its instruction sets.
5. Design a microprocessor system using interfacing concepts.
UNIT SEMICONDUCTOR DEVICES 9
I Classification of Solids Based on Energy Band Theory – Intrinsic Semiconductors –
Extrinsic Semiconductors – P type and N type-PN Junction Diode – Forward and
Reverse Bias – Avalanche Breakdown – Zener Diode – Zener Breakdown
Characteristics – Half Wave and Full Wave Rectifiers –Voltage Regulators – IC LM
7805 – LM 317.
UNIT TRANSISTOR AMPLIFIERS 9
II Bipolar Junction Transistor – Construction and Characteristics – CB – CE – CC
Configuration – Biasing Circuits –Transistor as a Switch – Concept of Feedback –
Negative Feedback and Positive Feedback – Class A - B and C Amplifiers – UJT-
Construction – Characteristics and Relaxation Oscillator – Application in Temperature
and Motor Speed Control.
UNIT DIGITAL ELECTRONICS 9
III Binary Number System – AND – OR – NOT – NAND – NOR – Exclusive OR Gates –
Boolean Algebra and Theorems – Basic Flip Flops (RS, D, JK and T) - Half and Full
Adders – Shift Registers – Counters – Basic A/D and D/A Conversion.
UNIT 8085 MICROPROCESSOR 9
IV Architecture of 8085 – Pin Configuration – Instruction Set – Addressing Modes –
Simple Programs using Arithmetic and Logical Operations –Introduction to
Microcontroller.
UNIT INTERFACING AND APPLICATIONS OF MICROPROCESSOR 9
V Basic Interfacing Concepts – Interfacing of Input and Output Devices – Applications of
Microprocessor Temperature Control – Robotic Arm Controller using Stepper Motors –
Traffic Light Control.
Total: 45
30.11.2018 Regulations-2015R
TEXT BOOKS
1. Milman and Halkias, “Integrated Electronics”, 2nd edition, Tata McGraw-Hill publishers,
2017.
2. Ramesh Goankar, “Microprocessor Architecture, Programming and Applications
with 8085”, 6th edition,Penram International Publishing, 2016.
REFERENCE BOOKS
1. Malvino and Leach, “Digital Principles and Applications”, Tata McGraw-Hill, 2017.
2. Salivahanan S, Suresh Kumar N, Vallavaraj A, “Electronic Devices and Circuits”,
4th Edition, Tata McGraw-Hill, 2017.
3. Mehta V.K, “Principles of Electronics”, S. Chand and Company Ltd.,2016.
4. Dougles V.Hall, “Microprocessor and Interfacing, Programming and Hardware”, Tata
McGraw-Hill, 2017.
30.11.2018 Regulations-2015R
EMBEDDED AND REAL TIME SYSTEMS
PREAMBLE:
Embedded system plays an important role in real-time scenario. It is an electronics and computer system which
is designed to control and access the data. It is a programmable controlled operating system with a dedicated function for
larger mechanical and electrical system.
It is an application specific, custom designed system which have only necessary components and hence
significantly smaller than a regular computer. Embedded Software Engineering is the process of controlling various
devices and machines. The various applications are washing machines, printers, automobiles, cameras, industrial
machines, smart phones etc.
30.11.2018 Regulations-2015R
TEXT BOOK
1. Marilyn Wolf, “Computers as Components - Principles of Embedded Computer System
Design”, 4th Edition, Morgan Kaufmann Publisher, (An Imprint from Elsevier), 2016.
REFERENCE BOOKS
1. Ajay V Deshmukh, “Microcontrollers Theory and Applications”, 3 Edition Paper back,
rd
3. Raj Kamal, “Embedded Systems Architecture Programming and Design” , 3rd Edition, TMH,
2014.
4. Xiaocong Fan, “Real-Time Embedded Systems: Design Prinicple and engineering practices”, SCI-Tech
Connect, Elsevier, 2016.
30.11.2018 Regulations-2015R
MULTIMEDIA COMMUNICATION
PREAMBLE:
Multimedia communication is an integrated and interactive theory. Multimedia is a combination of text, graphics,
sound, animation, and video, interactive electronic or digital means of manipulation delivered to the user. All the different
mediums are integrated through the digitization process and interactivity can be heightened by the possibility of easy
feedback.
To understand this technology, it is important to know in detail about the concepts of Multimedia Network
Services, development of user interface and design of a Multimedia System. This course will provide wide knowledge to
engineering graduate students interested in the field of multimedia.
Total 45
30.11.2018 Regulations-2015R
TEXT BOOK
1. Fred Halsall,“Multimedia Communications: Applications, Networks, Protocols and Standards”, Second Indian reprint,
Pearson Education, Asia, March 2018.
REFERENCE BOOKS
1. Nalin K. Sharda, “Multimedia Information Networking”, PHI, 2016.
2. Ralf Steinmetz, Klara Narstedt , “Multimedia Fundamentals: Vol 1 - Media Coding and Content Processing” ,
PearsonEducation, 2018.
3. Prabhat K. Andleigh, Kiran Thakrar, “Multimedia Systems Design”, PHI, 2018
30.11.2018 Regulations-2015R
SENSORS AND SMART STRUCTURES TECHNOLOGIES
PREAMBLE:
Advanced sensors, smart materials and structures represent an emerging multidisciplinary field that has
unlimited potential of broad engineering applications. Smart materials and structures, with embedded sensors
and systems are capable of self-diagnosis of structures.
In recent years, numerous civil infrastructures have been built in metropolitan areas all over the world. The
performance of these infrastructures during construction, operation, maintenance, and upgrading is a major
concern for the society. The traditional sensors, such as strain gauges, thermal couples, pressure transducers,
and displacement sensors, are becoming intelligent with integration with a microprocessor, a communication
module, and an energy harvesting system.
Solid state actuators have migrated from military applications to industrial and consumer applications.
Meanwhile, a new class of smart fluids materials, have emerged and enable a new class of semi-active control
devices. With the development in modern instrumentation systems, smart sensors, and smart structures are
finding more and more applications in structural health monitoring and structural control in Civil
Engineering.
It focusses on smart materials, strain measurement techniques, fiber optic sensors, autonomous motion sensors,
fire and humidity sensor, control devices, actuators, data acquisition and processing.
30.11.2018 Regulations-2015R
U15EC1006R L T P C
SENSORS AND SMART STRUCTURES TECHNOLOGIES
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Insight into the basic concept regarding smart materials and their use in structures.
2. Analyze the use of measuring techniques in smart materials and structures.
3. Identify the suitable sensors for smart materials.
4. Apply the techniques of actuators in smart structures.
5. Understand the data acquisition techniques, signal processing and control for smart structures.
UNIT INTRODUCTION 9
I Introduction to Smart Materials and Structures – Instrumented Structures Functions and Response –
Sensing Systems – Smart Bridge – Self Diagnosis – Signal Processing Consideration – Actuation
Systems and Effectors.
UNIT MEASURING TECHNIQUES 9
II Strain Measuring Techniques using Electrical Strain Gauges, Types – Resistance – Capacitance –
Inductance – Wheatstone Bridges – Pressure Transducers – Load Cells – Temperature Compensation –
Strain Rosettes.
UNIT SENSORS 9
III Sensing Technology – Types of Sensors – Physical Measurement using Piezo Electric Strain
Measurement – Inductively Read Transducers – The LVDT – Fiber Optic Techniques. Chemical and
Bio-Chemical Sensing in Structural Assessment – Absorptive Chemical Sensors – Spectroscopes –
Fibre Optic Chemical Sensing Systems and Distributed Measurement –Fire Sensor –Emergency Fire
Alarm –Humidity Sensor – Accelerometers – Motion Sensors and Pressure Sensors.
UNIT ACTUATORS 9
IV Actuator Techniques – Actuator and Actuator Materials – Piezoelectric and Electrostrictive Material –
Magnetostrictive Material – Shape Memory Alloys – Electro Rheological Fluids– Electro Magnetic
Actuation – Role of Actuators and Actuator Materials.
UNIT SIGNAL PROCESSING AND CONTROL SYSTEMS 9
V Data Acquisition and Processing – Signal Processing and Control for Smart Structures – Sensors as
Geometrical Processors – Signal Processing – Control System – Linear and Non-Linear.
Total: 45
TEXT BOOKS
1. A.K. Sawhney, “A Course in Electical and Electronic and Measurements and Instrumentation”, Dhanpat rai
and co pvt limited, 2015.
2. Brain Culshaw , “Smart Structure and Materials”, Artech House, Borton. London, 1996.
REFERENCE BOOKS
1. L. S. Srinath , “Experimental Stress Analysis”, Tata McGraw,1998.
3. Srinivasan, A.V and Michael McFarland. D, "Smart Structures -Analysis and Design”, Cambridge University
Press, 2001.
30.11.2018 Regulations-2015R
SIGNAL AND IMAGE PROCESSING
PREAMBLE:
This course is designed pedagogically and uncovers the concepts of two major topics signal and image
processing. The first three units of this course becomes the basis of introducing the students to the concept of
signals, systems and its types, also the method of handling the signals by various mathematical tools. This
course introduces the fundamental principles of signals and system analysis. These concepts form the building
blocks of modern digital signal processing, communication and control systems.
The course will cover various basic tools of signal and system analysis such as signal classification, LTI
systems, Properties of LTI Systems, Z-Transform, Fourier Transform, Discrete Fourier Transform (DFT). The
last two units of this course deals with Digital image processing. Study of these units is motivated by three
major applications. The first application is in improvement of pictorial information for human perception i.e.
enhancing the quality of the image so that the image will have a better look. The second is for autonomous
machine applications which have wider applications in industries, particularly for quality control in assembly
automation and many similar applications.
30.11.2018 Regulations-2015R
U15EC1007R SIGNAL AND IMAGE PROCESSING L T P C
3 0 0 3
COURSE OUTCOMES
At the end of each unit, the students will be able to -
1. Perform multiple operations on CT and DT signals and analyse the characteristics of continuous and discrete
time systems.
2. Apply Z transform on DT signals and analyse systems using Z transform.
3. Prove the properties of discrete Fourier transforms and implement DFT using fast Fourier transform.
4. Describe the fundamentals of monochrome and color image processing and analyse the basic relations
between pixels, connectivity and distance measures.
5. Apply image enhancement techniques in spatial and frequency domain.
3. Rafael C. Gonzalez and Richard E. Woods., “Digital Image Processing”, 4th edition, Pearson, 2017.
REFERENCE BOOKS
1. P.Ramesh Babu, “Digital Signal Processing”,7th edition, Scitech Publications (India) Pvt Ltd, 2017.
2. M .J. Roberts, “Signals & Systems Analysis using Transform Methods & MATLAB”, 3rd Edition, Tata
McGraw Hill, 2017.
3. Jayaraman S., Esakkirajan & Verrakumar “Digital Image Processing”, 5th Edition, TMH, New Delhi,
2011.
30.11.2018 Regulations-2015R
U15CS1001R BIG DATA AND ANALYTICS 3003
COURSE OUTCOMES:
Compare and analyze different types of digital data characteristics of big data
Describe the terminologies used in big data analytics
Apply MapReduce programming for various big data based problems
Design and develop programs using NoSQL databases like Mongo DB and Cassandra
Implement programs using Hive and Pig Databases
Types of Digital Data: Classification of Digital Data - Characteristics of Data, Evolution of Big Data,
Definition of Big Data, Challenges with Big Data, Characteristics of Big Data ,Traditional Business
Intelligence (BI) versus Big Data, A Typical Data Warehouse Environment , A Typical Hadoop
Environment.
Introduction - Big Data Analytics, Classification of Analytics, Challenges in Big Data, Technologies to handle
Challenges Posed by Big Data- Data Science- Data Scientist, Terminologies Used in Big Data Environments,
Basically Available Soft State Eventual Consistency (BASE), Few Top Analytics Tools.
Introduction Hadoop, RDBMS versus Hadoop, Distributed Computing Challenges, History of Hadoop
, Hadoop Overview, Use Case of Hadoop ,Hadoop Distributors, HDFS (Hadoop Distributed File
System),Processing Data with Hadoop, Managing Resources and Applications with Hadoop YARN
(Yet another Resource Negotiator),Interacting with Hadoop Ecosystem, MapReduce Programming -
Mapper, Reducer, Combiner, Partitioner, Searching, Sorting, Compression
Cassandra : Apache Cassandra - An Introduction , Features of Cassandra, CQL Data types, CQLSH,
Keyspaces, CRUD (Create, Read, Update and Delete) Operations, Collections, Using a Counter,
Time to Live (TTL), Alter Commands, Import and Export, Querying System Tables, Practice
Examples- MongoDB, Terms Used in RDBMS and MongoDB, Data Types in MongoDB , MongoDB
Query Language
Hive: Introduction to Hive, Hive Architecture, Hive Data Types, Hive File Format, Hive Query Language
(HQL), RCFile Implementation, SerDe, User-defined Function (UDF).
Pig: Introduction to Pig, The Anatomy of Pig, Pig on Hadoop , Pig Philosophy, Use Case for Pig: ETL
Processing, Pig Latin Overview , Data Types in Pig ,Running Pig , Execution Modes of Pig ,HDFS Commands
,Relational Operators ,Eval Function ,Complex Data Types ,Piggy Bank, User-Defined Functions (UDF)
,Parameter Substitution , Diagnostic Operator , Word Count Example using Pig,Pig versus Hive
30.11.2018 Regulations-2015R
Total: 45 hours
TEXT BOOKS:
1. Big Data and Analytics, Seema Acharya, Subhashini Chellappan, Infosys Limited,
Publication: Wiley India Private Limited,1st Edition 2015(Chapters 1,2,3,4,5,6,7,8,9,10)
REFERENCE BOOKS:
1. Hadoop in Practice, Alex Holmes, Manning Publications Co., September 2014, Second
Edition.
2. Programming Pig, Alan Gates, O’Reilly, Kindle Publication.
3. Programming Hive, Dean Wampler, O’Reilly, Kindle Publication.
30.11.2018 Regulations-2015R
U15CS1002R CLOUD COMPUTING 3003
COURSE OUTCOMES:
At the end of the course the students will be able to
1. Provide an overview of cloud computing
2. Explain the various tasks in developing cloud services
3. Analyze the provision of cloud computing services to different users
4. Configure the various cloud services according to the environment.
5. Analyze various ways to collaborate online
UNIT I Understanding Cloud Computing 6
Cloud Computing – History of Cloud Computing – Cloud Architecture – Cloud Storage – Why Cloud
Computing Matters – Advantages of Cloud Computing – Disadvantages of Cloud Computing – Companies in
the Cloud Today – Cloud Services
Web-Based Application – Pros and Cons of Cloud Service Development – Types of Cloud Service
Development – Software as a Service – Platform as a Service – Web Services – On-Demand Computing –
Discovering Cloud Services Development Services and Tools – Amazon – Google App Engine – IBM Clouds
Collaborating on Calendars, Schedules and Task Management – Exploring Online Calendar Applications-
Collaborating on Contact Management – Collaborating on Project Management – Collaborating on Word
Processing - Collaborating on Spread sheets- Collaborating on Databases – Storing and Sharing Files
Collaborating via Web-Based Communication Tools – Evaluating Web Mail Services – Evaluating Web
Conference Tools – Collaborating via Social Networks and Groupware – Collaborating via Blogs and Wikis
Total:45 hours
TEXT BOOK:
1. Michael Miller, Cloud Computing: Web-Based Applications That Change the Way You Work and
Collaborate Online, Que Publishing, August 2008.
REFERENCE BOOK:
1. Haley Beard, Cloud Computing Best Practices for Managing and Measuring Processes for On-demand
Computing, Applications and Data Centers in the Cloud with SLAs, Emereo Pty Limited, July 2008.
30.11.2018 Regulations-2015R
U15CS1003R INTERNET OF THINGS 3003
PREAMBLE
The “Internet of Things” (IoT) is the network of physical objects or "things" embedded with sensors, actuators,
software, electronics and network connectivity to enable it to achieve greater value and service by exchanging
data between the physical world and computer systems over existing network infrastructure. By connecting
everyday real world objects such as transports, buildings and industrial equipments, IoT guarantees to
revolutionize how we live and work. In the year 2020, it is estimated that approximately 30 billion devices will
be connected in IoT. IoT will drive new consumer and business behavior that will demand increasingly
intelligent industry solutions. It can also help various industries like agriculture, health services, energy,
security, disaster management etc., which need to automate solutions to problems faced through remotely
connected devices.
1. The sensors which collect data (including identification and addressing the sensor/device)
2. An application which collects and analyzes this data for further consolidation
3. Decision making and the transmission of data to the decision-making server. Analytical engines, actuators
and Big data may be used for the decision making process.
After completing the course the students will attain the following,
Ability to build real time IoT applications by interfacing the sensors with minimal programming.
Ability to associate sensor networks and communication modules for building IoT systems.
30.11.2018 Regulations-2015R
U15CS1003R INTERNET OF THINGS 3003
COURSE OUTCOMES:
TOTAL: 45 PERIODS
TEXT BOOK:
1. Arshdeep Bahga, Vijay Madisetti, "Internet of Things-A hands-on approach", Universities Press, 2015.
REFERENCES:
1. Manoel Carlos Ramon, ―Intel® Galileo and Intel® Galileo Gen 2: API Features and Arduino Projects for
Linux Programmers‖, Apress, 2014.
2. Marco Schwartz, ―Internet of Things with the Arduino Yun‖, Packt Publishing, 2014.
3. Adrian McEwen, Hakim Cassimally, “Designing the Internet of Things”, Wiley Publications, 2012.
4. Olivier Hersent, David Boswarthick, Omar Elloumi, “The Internet of Things: Key applications and
Protocols”, Wiley Publications 2nd edition , 2013.
30.11.2018 Regulations-2015R
U15CS1004R MOBILE APPLICATION DEVELOPMENT 3003
COURSE OUTCOMES
UNIT I INTRODUCTION 9
Android: An Open Platform for Mobile Development– Android SDK Features-Introducing the development
framework - Standard development environment for Android applications – Creating Your First Android
Application – Types of Android Application- Android Development Tools. Challenges of the mobile platform
Introducing the Application Manifest File- Using the Manifest Editor- Externalizing Resources- Android
Application Lifecycle – Introducing the Android Application Class – Android Activities - Fundamental Android
UI Design- Android User Interface Fundamentals- Introducing Layouts- Introducing Fragments, Creating New
Views- Introducing Adapters
Introducing Intents- Creating Intent Filters and Broadcast Receivers- Using Internet Resources.
Shared Preferences – Working with the file systems - Introducing Android Databases- Introducing SQLite-
Content Values and Cursors- Working with SQLite Databases- Creating Content Providers- Using Content
Providers
Working in the background - Creating and Using Menus and Action Bar Action Items – Hardware Sensors -
Telephony and SMS - Monetizing, Promoting, and Distributing Applications
Total: 45 hour
TEXT BOOK
3. Reto Meier, "Professional Android Application Development", Wiley, 2012
REFERENCE
1. http://developer.android.com/develop/index.html
2. Charlie Collins, Michael Galpin and Matthias Kappler, “Android in Practice”, DreamTech, 2012
30.11.2018 Regulations-2015R
U15CS1005R OBJECT ORIENTED PROGRAMMING AND DATASTRUCTURES 3 0 0 3
PREAMBLE
30.11.2018 Regulations-2015R
U15CS1005R OBJECT ORIENTED PROGRAMMING AND DATASTRUCTURES 3 0 0 3
COURSE OUTCOMES:
Basic Concepts of Object Oriented Programming – Expressions – Control Structures, Functions - Classes and
Objects, Class Members, Access Control, Pointers, Constructors and destructors, parameter passing methods,
Inline functions, static class members, this pointer, friend functions, dynamic memory allocation (new and
delete).
Operator Overloading, Inheritance basics, types of inheritance, base class access control, compile time
polymorphism, runtime polymorphism using virtual functions, abstract class, Exception Handling.
Basic data structures, Abstract Data Type, Linear Data Structures- List ADT, Stack ADT, Queue ADT,
Searching techniques-Linear Search, Binary Search.
Basic terminologies, tree traversals, binary trees, binary search tree ADT, Hashing-Introduction –Hashing
Techniques. Priority Queues -Binary heap.
UNIT V: GRAPHS 9
Definitions, Topological sort, shortest path algorithm - Unweighted shortest path, Dijkstra’s algorithm,
Minimum Spanning Tree - Prim’s algorithm, Kruskal’s algorithm – Depth first search – Breadth first search.
TOTAL: 45 HOURS
TEXT BOOKS :
1. Mark Allen Weiss, “Data structures and Algorithms Analysis in C”, 4th Edition, Prentice Hall, 2013.
2. E. Balagurusamy, “Object-Oriented Programming With C++”, 3rd edition, Tata McGraw Hill, 2006.
30.11.2018 Regulations-2015R
REFERENCES:
1. Adam Drozdek, “Data structures and algorithms in C++”, 3rd Edition, Cengage Learning, 2013.
2. Langsam, Augenstein and Tanenbaum “Data structures using C and C++”, 2nd Edition, Prentice Hall of
India, 1998
3. Micheal T. Goodrich, Roberto Tamassia, David Mount, “Data Structures and Algorithms in C++”, Wiley
Student edition, John Wiley and Sons, 2009.
30.11.2018 Regulations-2015R
U15IT1001R BASIC DATA STRUCTURES 3 0 0 3
PREAMBLE
The goal of this course is to introduce the concepts of basic data structures and to familiarise with the
implementation issues. The course is designed to prepare the students to have fundamental knowledge on data
structures which is an essential skill to work in any IT industry. This course is designed for the students of non-
circuit branches (Mechanical, Civil and Fashion Technology).
The students will acquire skills to represent real world data and store them in computational devices for further
computations. The students will have hands-on experience in implementing the operations. Today, most of the
applications are available in the digital format. The curiosity of knowing how the information is rendered
digitally is answered in this course. For instance, the students will find the answer of how navigation is
internally implemented by Google maps.
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Explain and implement the operations on simple data structures such as lists
2. Explain and apply the stack data structure
3. Explain and apply the queue data structure
4. Explain and apply tree data structure and hash tables
5. Develop and apply algorithms for real applications using graphs
UNIT I LISTS 9
Mathematical analysis - Abstract Data Types (ADT) – List ADT – array-based implementation – linked list
implementation – doubly-linked lists – circular linked list – Applications.
UNIT II STACK 9
STACK ADT – Array and Linked List Implementation of Stack – Stack Operations – Stack Applications:
Balancing Symbols, Postfix Expression Evaluation, Infix to Postfix Conversion and Function calls.
UNIT III QUEUE 9
QUEUE ADT – Array and Linked List Implementation of Queues – Queue Operations – Circular Queues –
Double ended Queues – Applications of Queues.
UNIT IV TREE STRUCTURES AND HASHING 9 Preliminaries-
Implementation Tree ADT – tree traversals - Binary Tree ADT – expression trees – binary search tree – AVL
trees – Hashing –General idea - Hash function - Separate chaining – open addressing –linear probing.
UNIT V GRAPHS 9
Definitions – Representation of graphs- traversals - breadth-first traversal - Depth-first traversal - shortest-path
algorithms – Dijkstra’s algorithms- minimum spanning tree – Kruskal's algorithms.
Total: 45 hours
30.11.2018 Regulations-2015R
TEXT BOOK
1. M. A. Weiss, “Data Structures and Algorithm Analysis in C”, Second Edition, Pearson Education, 2006.
REFERENCES
1. A. V. Aho, J. E. Hopcroft, and J. D. Ullman, “Data Structures and Algorithms”, Pearson Education,
1983.
2. R. F. Gilberg, B. A. Forouzan, “Data Structures”, Second Edition, Thomson India Edition, 2005.
3. A. M. Tenenbaum, Y. Langsam, and M. J. Augenstein, “Data Structures using C”, Pearson Education,
1998.
4. Sara Baase and A. Van Gelder, “Computer Algorithms”, Third Edition, Pearson Education, 2000.
5. T. H. Cormen, C. E. Leiserson, R. L. Rivest, and C. Stein, "Introduction to Algorithms", Second Edition,
Prentice Hall of India Ltd, 2001.
30.11.2018 Regulations-2015R
U15IT1002R NETWORK ENGINEERING 3 0 0 3
PREAMBLE
The students may have the curiosity to find what made the web pervasive. The underlying concept
which made the Internet a reality is computer networks. The evolution of Internet started during 1960s by US
department of defense. It has now become the common platform to share information.
This course is designed to enable the learners to understand the basic principles of networking and in-
depth functionalities of each layer in the network. After the completion of the course, learner will able to
comprehend the principles and concepts of Internet which supports the World Wide Web.
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Describe the structure and organization of computer networks; including the division into network layers,
role of each layer, and relationships between the layers.
2. Explain the basic concepts of link layer properties including error-detection and correction techniques,
multiple access protocols, and characteristics of link layer media.
3. Explain the transport layer concepts and protocol design including connection oriented and connection-less
models, techniques to provide reliable data delivery and algorithms for congestion control and flow control.
4. Explain the network layer concepts and protocol design including datagram forwarding, routing algorithms,
and network interconnections.
5. Explain the basic concepts of application layer protocol design including client/server models, peer-to-peer
models, and network naming.
UNIT I INTRODUCTION 9
Components – Data Representation- Data flow –LAN-WAN-Internet -The OSI Model- TCP/IP – OSI versus
TCP model – Encapusulation and Decapsulation
UNIT II DATA LINK LAYER 9
Link layer addressing – ARP –RARP- Types of Errors- Cyclic Redundancy Check- Check Sum - Stop and wait
protocol- stop and wait automatic repeat request- piggy backing-CSMA, CSMA/CD – IEEE802.3, IEEE802.11
UNIT III NETWORK LAYER 9
Network layer services- packetizing-routing and forwarding-Network layer performances-Delay-Throughput-
Packetloss-Internet Protocol-Datagram Format-Fragmentation-options- Routing Algorithms-Distance Vector
Routing- Link state routing
UNIT IV TRANSPORT LAYER 9
UDP – Services- Application – TCP-Services-features- Segment – Flow control – Error Control – Congestion
Control
UNIT V APPLICATION LAYER 9
Client Server programming – Iterative communication using UDP -Iterative communication using TCP –
WWW – HTTP – FTP – EMAIL
30.11.2018 Regulations-2015R
Total: 45 hours
TEXT BOOK
1. Behrouz A. Forouzan, “Data communication and Networking”, Tata McGraw-Hill, 5th Edition 2013.
REFERENCES
1. James F. Kurose and Keith W. Ross, “Computer Networking: A Top-Down Approach Featuring the
Internet”, Pearson Education, 2011.
2. Larry L.Peterson and Peter S. Davie, “Computer Networks: A Systems Approach”, Harcourt Asia Pvt.
Ltd., 2nd edition, 2009.
3. Andrew S. Tanenbaum, “Computer Networks”, Prentice Hall PTR, 4th Edition, 2003.
4. Halsall, Fred, “Computer Networking and Internet”, Pearson Education, 5th edition, 2006.
30.11.2018 Regulations-2015R
U15IT1003R PROBLEM SOLVING TECHNIQUES USING JAVA PROGRAMMING 3 0 0 3
PREAMBLE
The students opting for this course will learn to code in Java and improve the programming and
problem-solving skills. Through this course, the students will acquire appropriate skills to design algorithms as
well as develop and debug programs. We are excited to offer a unique course structure, designed to support
learners of different engineering departments and to fulfill their dreams of pursuing a career in an IT industry.
This course aims to satisfy the curiosity of the learners who wants to know how a ticket is booked in
railways, or how an electricity consumption bill is generated. After the completion of the course, learners will
be able to code real time problems in JAVA programming language.
COURSE OUTCOMES
At the end of the course, the student will be able to
6. Apply basic features of Java to write programs for solving problems
7. Apply event handling techniques for interaction of the user with GUI
8. Write programs to handle exceptions and I/O
9. Assign priorities and resolve run-time errors with multithreading concept
10. Connect Java applications with relational databases using JDBC for storing and retrieving sensitive data
REFERENCES
1. Cay S. Horstmann and Gary Cornell, “Core Java: Volume I – Fundamentals”, Ninth Edition, Prentice
Hall, 2013.
2. K. Arnold, D. Holmes and J. Gosling, “The JAVA programming language”, Fourth Edition, Addison
Wesley Professional, 2005.
3. Timothy Budd, “Understanding Object-oriented programming with Java”, Third Edition, Addison
Wesley, 2000.
4. C. Thomas Wu, “An introduction to Object-oriented programming with Java”, Fifth Edition, Tata
McGraw-Hill Publishing company Ltd., 2009.
30.11.2018 Regulations-2015R
U15IT1004R PYTHON PROGRAMMING 3 0 0 3
PREAMBLE
Python is an easy to learn, powerful programming language. It has efficient high-level data structures. It
is a simple but effective approach to object-oriented programming. Python’s elegant syntax and dynamic typing,
together with its interpreted nature, make it an ideal language for scripting and rapid application development in
many areas on most platforms. This programming language has become a preferred development technology in
IT industries.
Python can be integrated with many other technologies also. It is rapidly becoming a de-facto language
for data analytics and / or machine learning as many packages are added to perform more complex tasks. This
course aims to teach everyone the basics of programming using Python.
COURSE OUTCOMES
At the end of the course, the student will be able to
1. Write simple applications
2. Develop programs using loops
3. Create applications using functions
4. Develop application using files
5. Create application using Python and MySQL
UNIT I INTRODUCTION 9
The way of programming-What is programming- debugging – formal and natural languages - Python: Features -
Installing - Running – The Basics-variables-Operators and Expressions
UNIT II CONTROL FLOW 9
Control Flow: introduction- if – else – while statement – do while – for loop –break – continue
UNIT III PYTHON FUNCTIONS 9
Sequences: String - List – Tuple – Dictionary - Functions – Function Parameters, Local and Global Variables,
Default Arguments, Keyword Arguments, Return Statements.
UNIT IV PYTHON MODULES, PACKAGES AND FILES 9
Introduction – Byte files – from import – making own modules – Files and Input/Output: File Objects and Built
in functions – Command line Arguments – Packages.
UNIT V PYTHON DATABASE CONNECTIVITY 9
SQL Introduction – simple queries – create - insert – update – delete, MySQL Introduction – connecting python
and MySQL database.
Total: 45 hours
30.11.2018 Regulations-2015R
TEXT BOOK
1. Swaroop C N, “ A Byte of Python “, ebshelf Inc., 1st Edition, 2013.
REFERENCES
1. Wesley J. Chun, “Core Python Programming”, Pearson, 2nd Edition, 2006.
2. Allen B.Downey, “Think Python: How to Think Like a Computer Scientist”, O'Reilly Media, 2nd
Edition, 2015.
30.11.2018 Regulations-2015R
U15FT1001R FUNDAMENTALS OF FASHION DESIGN 3003
PREAMBLE
At the end of the study of this course the students will be able to, explain the fashion related terms,
theories in fashion cycle and principles and elements of fashion. They will be able to judge the color
concept for a garment and various fashion components. Also the students will be able to explain
about the concept of fashion merchandising and to plan wardrobe for various age group. The
students will gain the ability to develop a style that is distinctive, consistent and new and to manage
the process of communication on which fashion depends.
COURSE OBJECTIVE
To impart knowledge to the students on fundamentals of fashion and basics that governs all fashion movement
and change.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Describe the basic fashion terminology, and to understand, define and grasp key terms,
principles, concepts and theories involved in fashion cycle.
2. Explore the manner in design factors and colors influence fashion.
3. Understand the roles and influence of various principles of design towards fashion.
4. Explain the basic fashion components.
5. Explore the impact of fashion merchandising on our everyday lives, and be able to identify trends of
wardrobe planning.
30.11.2018 Regulations-2015R
UNIT IV Fashion Components 9
Fashion Components: Introduction to neck lines, waistlines, hemlines, collars, sleeves, cuffs,
plackets and pockets. Fullness applied in apparel, tucks, pleats, gathers, shirring, frills or ruffles,
flounces.
TEXT BOOKS
1. Parul Bhatnagar, “Traditional Indian Costumes and Textiles”, Abhishek Publications, Chandigarh,
2004.
2. Elaine Stone, “The Dynamics of Fashion”, Fairchild Publications, New York, 2001.
REFERENCES
30.11.2018 Regulations-2015R
U15FT1002R GARMENT EXPORT MERCHANDISING AND DOCUMENTATION
3003
PREAMBLE
At the end of the study of this course the students will be able to, explain the types, functions and techniques of
fashion merchandising. They will be able to explain the concept of time management, production scheduling
and quality assurance, marketing strategies. Also to explain various export merchandising and development of
production line for new apparel products. The students can be able to explain the facilities for exporters,
describe export documentation and its procedures.
Further, the students will gain the knowledge on the procedure of garment export merchandising and facilities
for exporters, export procedures and export documentations.
COURSE OBJECTIVE
To impart knowledge to the students on garment export merchandising and export documentation procedure.
COURSE OUTCOMES
At the end of the course, the students are able to,
1. Describe the types and functions of merchandising.
2. Explain the principles and techniques of fashion merchandising.
3. Describe the time management concept in merchandising and computer application in merchandising.
4. Explain the facilities available for garment exporters with regard to Govt. assistance and bank finance;
Describe market development assistance and MDF (Marketing Development Fund).
5. Explain the procedures involved to start up a garment unit, export procedures, payment methods and list the
documents connected to exports and INCO Terms connected with garment export.
UNIT I Merchandising 9
Apparel Merchandising: Definition, Functions of merchandising division, Roles and responsibilities of export
merchandiser.
Types of Merchandising: Principles and techniques of apparel merchandising, Retail merchandising, Visual
merchandising; Interfacing merchandising with production.
30.11.2018 Regulations-2015R
UNIT IV Facilities for Exporters 9
Subsidies to garment exporters, Duty drawback Export finance through banks, Export credit, short term,
medium term and long term credits. Export promotion councils, Export Credit Guarantee Corporation (ECGC),
Export import bank, Market development assistance, TUFS, Apparel parks – Brief outline about SEZs.
TOTAL: 45 hours
TEXT BOOKS
1. Moore Evelyn C., Path for Merchandising, A Step by Step Approach, Thames and Hudson Ltd., London,
2001,
2. Shivaramu S., “Export Marketing – A practical guide to exporters”, Wheeler Publishing, 1996.
REFERENCE BOOKS
1. Laine Stone and Jean Samples, Fashion Merchandising, McGraw Hill Books, Singapore, 1985.
2. Jeannette Jamow, Kitty G. Dickerson, “Inside the Fashion Business”, Prentice Hall, 1997.
3. KoshyDarlie O., “Effective Export Marketing of Apparel”, Global Business Press, 1996.
4. Hearle J. W. S., Hines T. and Suh. M. (Ed.), “Global Marketing of Textiles” JTI, 1997.
30.11.2018 Regulations-2015R
U15FT1003R GARMENT MANUFACTURING TECHNOLOGY 3003
PREAMBLE
At the end of the study of this course the students will be able to, explain the basics of garment making and
pattern making methods. They will be able to explain the types of seams, stitches, needle and sewing thread.
Also the students will be able to explain garment accessories and quality requirements and finishing of
garments. The students will gain the knowledge on the procedure of garment manufacturing in the industry.
COURSE OBJECTIVE
To impart knowledge to the students on garment manufacturing, pattern making, sewing and garment finishing.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Explain the basics of garment making and pattern making method.
2. Explain the various seams, stitches, needle type and sewing thread.
3. Explain the various garment accessories.
4. Explain the garment quality particulars and method of garment laundering.
5. Discuss the method of overall quality system and finishing of garments.
TOTAL: 45 hours
30.11.2018 Regulations-2015R
TEXT BOOKS
REFERENCES
1. EIRI Consultants and Engineers, “Hand book of garment manufacturing technology”, 2017.
2. Janace E. Bubonia, “Apparel production terms and processes”, 2017.
3. Harold Carr, Barbara Latham, “The Technology of Clothing Manufacture”, Wiley, 1994.
30.11.2018 Regulations-2015R
U15FT1004R TEXTILE FIBRES, YARNS AND FABRICS 3003
PREAMBLE
At the end of the study of this course the students will be able to, Explain the cultivation / production of major
natural and artificial fibres State the important properties of various fibres Explain the denier and Tex systems
the identification methods of common fibres, also to explain the fundamentals and theory of various operations
carried out at different stages of spinning process, which would be helpful to them in understanding the
influence of various parameters on quality of the yarn and productivity. The students will be able to learn about
the Theory of preparation of yarn for fabric formation and various preparatory process, and selection and
control of process variables during weaving preparatory. Study of this subject will make the students to
understand fundamentals of knitting types of knitting processes in details of knitting machine, to learn about
chemical structure of fibres and treatments involved in the wet processing of textiles.
COURSE OBJECTIVE
To impart knowledge to the students on textile fibres, objectives and principle of various processes and
machineries involved in textile yarn and fabric manufacture and basics of chemical processing of textiles.
COURSE OUTCOMES
At the end of the study of this course the students will be able to,
1. Describe the textile terms, classify textile fibres and describe the properties and end uses of textile fibres.
2. Describe the objectives and principles of various processes involved in yarn manufacture.
3. Describe the objectives and principles of various processes involved in woven fabric manufacture and
briefly explain about basic woven fabric structures.
4. Describe the objectives and principles of various processes involved in knitted fabric manufacture, non-
woven fabric manufacture, its applications and briefly explain about basic knitted structures.
5. Explain the grey preparation process, fundamentals of colour, basics of dyeing, dyeing machineries, basics
of printing and finishing techniques.
30.11.2018 Regulations-2015R
Weaving: Basic principle of fabric formation, general classification of looms and working of plain loom, basics
of primary, secondary and auxiliary motions. Basic details about different types of shuttleless loom.
Elements of woven design: Design, draft, peg plan and repeat.
Construction of Elementary Weaves: Plain weave, twill weave and honey comb weave. terry weave. Brief
study of jacquard design.
TEXT BOOKS
1. Srinivasamoorthy H. V., “Introduction to Textile Fibres”, The Textile Association India, Mumbai, 1993.
2. Lord P. R., “Yarn Production: Science Technology and Economics”, The Textile Institute, Manchester,
U.K., 1999.
3. Talukdar M. K., Sriramulu P. K. and Ajgaonkar D. B., “Weaving: Machines, Mechanisms,
Management”, Mahajan Publishers Pvt Ltd, 2004.
4. Anbumani N., Knitting-Fundamentals, Machines, Structures and Developments, New Age International
Publishers, 2007.
5. Koushik C. V. and Antao Irwin Josico, “Chemical Processing of Textiles , Grey Preparation and
Dyeing” , NCUTE Publication, New Delhi, 2004.
REFERENCES
1. Mishra S.P., “Fibre Science and Technology”, New Age International Publishers, New Delhi, 2000.
2. Chattopadhyay R. (Ed), “Advances in Technology of Yarn Production”, NCUTE, IIT Delhi, 2002.
3. Lord P. R. and Mohammed M. H., “Weaving: Conversion of Yarn to Fabric”, Merrow Publishing Co.
Ltd., UK, 1998.
4. Spencer D.J., Knitting Technology: A Comprehensive Handbook, Woodhead Publishing Limited,
rd
England, 3 Edition, 2001.
5. Shenai V. A., Technology of Textile Processing , Vol. III, IV, V, VII and VIII, Sevak Publications,
Mumbai, 1995.
30.11.2018 Regulations-2015R