Professional Documents
Culture Documents
Question Bank-NAS
Question Bank-NAS
IILM-CET
2018-2019
Authored by: Amit Kr. Rajput
IMPORTANT QUESTIONS
UNIT- I
Q.1 Switch is move from 1 to 2 at t=0 find i(t) if e(t)=e-t sin 2t
Q.3 Use nodal analysis to find the voltages 𝑉𝑎 , 𝑉𝐵 & 𝑉𝑥 𝑖𝑛 𝑡ℎ𝑒 𝑐𝑖𝑟𝑐𝑢𝑖𝑡 𝑖𝑛 𝑤ℎ𝑖𝑐ℎ 𝐼1 = 0.4 𝐴
Q.4 Impedances 𝑍2 & 𝑍3 𝑖𝑛 𝑝𝑎𝑟𝑎𝑙𝑙𝑒𝑙 are in series with impedance 𝑍1 across a 100-V, 50 Hz ac supply.
Determine the value of capacitance of 𝑋𝑐 such that the total current will be in phase with the total voltage.
What is then the circuit current & power?
A.K.Rajput Page 1
IMPORTANT QUESTIONS
UNIT- II
Q.1 Using thevenin’s theorem, find the current through the load impedance 𝑍𝐿
Q.2 using intial & final value theorem find f (0+ ) & f (∞) for the following.
Q.4 Draw the poles & Zeros of the network function. Draw the pole zero plot of the given network function &
obtain V(t ) with the help of pole zero plot.
A.K.Rajput Page 2
IMPORTANT QUESTIONS
UNIT- III
Q.1 Differentiate between the following terms related to network graph theory
(ii) Draw the reduced incidence matrix of the directed graph shown in the following fig.
Draw the oriented graph. Select a tree & find f-cutset matrix.
(ii)Write down the node equation for the network shown in fig
Q.4 for the circuit shown in figure 2, draw its graph, obtain 𝐵𝑓 taking branches2, 4, 5 as tree branches. Hence
determine the loop equation
A.K.Rajput Page 3
IMPORTANT QUESTIONS
Q.5 A Graph has 4 nodes & 7 branches. The reduced incidence matrix for the graph is given
A.K.Rajput Page 4
IMPORTANT QUESTIONS
UNIT-IV
Q.1 (i) derive the condition for reciprocity in terms of y-parameters.
Q.3 two identical sections of the network shown are cascaded. Calculate the transmission (ABCD) parameters
of the resulting network
(ii) calculate Z parameters for the network for the following fig.
Q.5 (i) for a network to be reciprocal show that AD-BC=1. Where A, B, C, D are transmission parameters.
(ii)if two port networks are connected in parallel, show that the resultant Y-parameters are the sum of
corresponding Y-parameters of the two networks.
A.K.Rajput Page 5
IMPORTANT QUESTIONS
UNIT-V
Q.1 what are Hurwitz polynomial? Discuss different properties of Hurwitz Polynomial. Check whether the given
polynomials are Hurwitz or not.
Q.4 State the properties of RL driving point impedance function. Also Realize the given network impedance
function using Cauer’s Form-I & Cauer’s Form-II
(𝑠+1)(𝑠+3)
Z(s) =
𝑠(𝑠+2)
Q.5 Define positive real functions & enlist its properties. Check whether the function
2𝑠 2 +2s+1
Z(s) = 𝑠3 +2𝑠2 +𝑠+1 is a positive real.
A.K.Rajput Page 6