Professional Documents
Culture Documents
Rockwell Automation Library of Process Objects 3 1 03 Release Notes 2015 01 23 PDF
Rockwell Automation Library of Process Objects 3 1 03 Release Notes 2015 01 23 PDF
Rockwell Automation Library of Process Objects 3 1 03 Release Notes 2015 01 23 PDF
Version 3.1-03
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 2
REVISION 3.1-03 (JANUARY 23, 2015) .................................................................................................................. 14
SYSTEM FEATURES........................................................................................................................................................14
1. New P_Din Quick Display ........................................................................................................................... 14
2. New L_CPU_24 Instruction......................................................................................................................... 15
3. P_PIDE Quick Display Enhancements ......................................................................................................... 16
4. E300 Overload Faceplate Display Enhancements ...................................................................................... 16
5. L_TaskMon Faceplate Trend ...................................................................................................................... 16
6. Multiple GoToDisplay buttons removed .................................................................................................... 16
7. Common Faceplate Objects ....................................................................................................................... 16
ANOMALIES ................................................................................................................................................................17
1. Overload Faceplate Tag Changes ............................................................................................................... 17
2. Display Element Navigation Buttons .......................................................................................................... 17
3. I_EH_FlowMeter Faceplate Trends ............................................................................................................ 17
4. P_AIn94H Faceplate ................................................................................................................................... 17
5. P_DoseFM Animation ................................................................................................................................ 18
6. Dosing Tool-Tips ......................................................................................................................................... 18
7. P_PF753 Scaling Limits ............................................................................................................................... 18
8. Interlock Permissive Help Display............................................................................................................... 18
9. L_TaskMon Faceplate ................................................................................................................................ 18
10. Prompt Button ........................................................................................................................................... 18
11. P_PF755 ..................................................................................................................................................... 18
12. P_ AInAdv-Faceplate .................................................................................................................................. 19
13. P_Motor-Faceplate .................................................................................................................................... 19
14. Bulletin 1756 HART Analog Input Add-On Instruction ............................................................................... 19
15. Motor and Drive Add-On Instructions ........................................................................................................ 19
16. P_ValveC Breadcrumbs .............................................................................................................................. 19
17. P_SMC Faceplates ...................................................................................................................................... 19
18. P_HiLoSel Faceplates.................................................................................................................................. 20
FUNCTIONAL CHANGES..................................................................................................................................................20
1. Control Valve Add-On Instruction .............................................................................................................. 20
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 3
This document provides the Release Notes for the RSLogix 5000 Add-On Instructions and FactoryTalk
View Objects that make up the Rockwell Automation Library of Process Objects. This version of the
Release Notes document (dated January 23, 2015) is for Version 3.1-03 of the Library.
Revision 3.1-00 is a major release and as such, it includes changes to logic and HMI files and
documentation.
Summary of Changes
Here is a summary of the changes to the Library going from Version 3.0 to Version 3.1-00.
1. New Instructions
The following new-for-3.1 instructions, and their graphic symbols and faceplates, are added:
The SrcQ_IO parameter is used to animate the communications status indicator shown on the lower
portion of the faceplate operator (home) tab.
The meanings of the SrcQ enumeration values are shown in the following table.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 4
SrcQ_xxx Quality Condition
0 Live Input, Confirmed Good
1 Good Live Input, Assumed Good
2 Has No Feedback, Assumed Good
8 Simulated
9 Test Loopback
10 Entered
16 Live Input, Off Spec
17 Substituted, at Device / Bus
18 Uncertain Substituted, at AOI (Maint Byp)
19 Shed, Using Last Good Value
20 Shed, Using Replacement Value
32 Signal Failure
33 Channel Fault (Declared by Module)
Bad
34 Module / Comm Fault
35 Bad Configuration (affecting value)
A diagnostic tab has been added to device faceplates to show the state of each of the possible Not
Ready reasons for the device.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 5
4. Maintenance Bypass
The P_Perm and P_Intlk objects now have the ability to bypass individual permissives and interlocks. A
Maintenance Tab has been added to the P_Perm and P_Intlk faceplates where the maintenance user
can select which permissives and interlocks to bypass when bypassing is enabled or active on the
downstream device.
5. Faceplate Trends
The trend displays on the faceplates have been modified with a light background. Thresholds are shown
as horizontal lines superimposed on the trends for better performance. A color key has been added to
each trend display.
Also, the target and deviation trend displays used by P_PIDE and P_AInAdv (both the faceplate and
display element) have been changed. The Target (or PV) is a two pixel line (formerly a one pixel line).
The deviation lines are now a one pixel dashed line (formerly a two pixel solid line).
Important: The P_Mode instruction does not include the required timer. This must be provided by
external logic. The P_Mode instruction simply provides this new Status as a means to reset/extend the
time provided in the external logic.
The Maintenance Mode Acquire command (MCmd_Acq) is now enabled (Rdy_MAcq) even when
Maintenance Mode is acquired to allow this time extension to be triggered.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 6
9. Alarm Changes
The Alarm Severity (Cfg_Severity) in P_Alarm has been changed from a SINT (1-4) to an INT (1-1000).
This is to align with future versions of Factory Talk Alarm and Events which will allow the severity value
to be specified by a tag in the controller.
The P_Alarm faceplate has been modified with a slider and an input field to configure Cfg_Severity.
Add-On Instruction which use P_Alarm had their rung comments modified to reflect the new severity
values. Also, logic to produce the overall alarm priority and acknowledgment value, Val_Notify, was
separated from logic which produces the “Reset Required” Ready bits, Rdy_Reset and Rdy_ResetAckAll,
for clarity.
In addition, a new faceplate and graphic symbol for P_HiLoSel are now included in the Library.
12. P_PIDE
Status Parameters Sts_InstrFaults1 and Sts_InstrFaults2 were added to the P_PIDE add-on instruction,
and a second page of diagnostics was added to the P_PIDE faceplate to show detailed instruction fault
and configuration fault information for the instruction.
13. P_Seq
The Simple Sequencer P_Seq has the error status Err_NextStep and logic added to hold the sequence
and call attention to a configuration in which a branch or other condition causes the sequencer to
attempt to execute a step number outside the bounds of the “Steps” array.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 7
Revision 3.1-01 (September 5, 2014)
Revision 3.1-01 is the first public release of the 3.1 Library. Revision 3.1-01 includes updates to some of
the Logix AOI’s, FactoryTalk View SE objects, and the addition of the FactoryTalk View ME objects.
Summary of Changes
Here is a summary of the changes to the Library going from Version 3.1-00 to Version 3.1-01.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 8
the faceplates; the data have been exposed for those users who wish to modify the faceplates or
otherwise provide display of the time elapsed or remaining.
These modifications generally apply to all Dosing, Valve, Motor, and Drive objects and to the Discrete 4-
State device (P_D4SD), n-Position device (P_nPos), Discrete Output (P_DOut) and similar instructions.
IMPORTANT: In order for the Dosing blocks to be useful for process simulation, these blocks
operate their discrete outputs (Out_RunFlow, Out_DribbleFlow, and Out_StopFlow) normally when in
simulation, in order to drive downstream device (motor, valve, drive) blocks. In order to not energize
equipment, the downstream device blocks must be in simulation. When a Dosing block is in simulation,
it only simulates the flow and quantity.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 9
(RA-UI) Prompt Objects.ggfx
(RA-UI) P_Prompt-Select.gfx
(RA-Seq) Standard Objects.ggfx
(RA-UI) Prompt Objects.ggfx 3.1-01 Modified the Prompt Selection Global Obect so the
Prompt Array is #2 (rather than assumed to be
"#1s"). The Array reference is now #3. The Text for
the title is now #4. Added a new global object
GO_PromptSelectWithCustomArray that allows the
display to use a prompt array that has an array in a
different scope
(RA-UI) P_Prompt-Select.gfx 3.1-01 The display parameters have changed so the Prompt
Array is #2 (rather than assumed to be "#1s"). The
Array reference is now #3. The Text for the title is
now #4
(RA-BAS) Built-In MMC-Faceplate.gfx 3.1-01 Changed the SP/PV Trends: Changed the SP pen line
(RA-BAS) Built-In IMC-Faceplate.gfx thickness to 2.
(RA-BAS) Built-In CC Autotune- 3.1-01 Changed the SP/PV Trend: Changed the SP pen line
Faceplate.gfx thinckness to 2 and deleted the Deviation Pens
because the deviation tags do not exist. Placed the
Tag tool-tip object in the correct location (lower
right corner of the display)
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 10
(RA-BAS) Built-In PIDE-Faceplate 3.1-01 Changed the SP/PV Trend: Changed the SP pen line
thinckness to 2. Changed the deviation pen line
thickness to 1 and style to dashed.
Global Object Parameters - In FTView ME, if a Global Object Parameter does not have anything
entered and the parameter is used as a tag in the display, then FTView ME displays a diagnostic message
informing the user that the field is blank.
To avoid the diagnostic message, the HMI designer can enter a character in the Global Object Parameter
‘Value’ field such as ‘x’ or ‘Unused’. In most cases, this solution will not have any ill effects on the
operation of the displays.
Simple Sequencer – Release 3.1-01 does not contain a FTView ME version of the Simple Sequencer.
This library component is expected to be added in a subsequent release.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 11
Revision 3.1-02 (October 1, 2014)
Summary of Changes
The following items were changed for this version of the library.
(RA-BAS) P_AInAdv-Faceplate.gfx
(RA-BAS) P_AInAdv-Quick.gfx
(RA-BAS-ME) P_AInAdv-Faceplate.gfx
The Foreground and Background Colors for state 0 through 5 of the Multi-State Indicator in object
GO_CommStatus were modified. This global object appears in the lower left corner of the home tab on
most library faceplates. The color changes were made via the color change tool (causing an update to
the CAXML file as well).
The object GO_Communication was also modified by removing the simulation state. The colors were
changed for state 0 (via the CAXML file). This object is used on the built-in faceplates only.
When an import of alarms from XML or Microsoft Excel into FTAE is performed, the FTAE server sets
affected alarms to Disabled. When the import is complete, the alarms are re-enabled. In P_Alarm
v3.1-01 and earlier, the use of the same bit for the Disabled alarm status bit (from FTAE to controller)
and for the Disable alarm control bit (from controller to FTAE server) resulted in a communication timing
dependency that could cause some alarms to be left Disabled after the alarm import completed.
P_Alarm v3.1-02 uses separate bits for FTAE Status (Disabled, Shelved, Suppressed) and FTAE Control
(Disable, Enable; Shelve, Unshelve; and Suppress, Unsuppress). The new bit assignments are shown in
the table below.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 12
All instructions that depend on P_Alarm (in other words, have P_Alarm instances within them) are
UNCHANGED in this release, but they are up-revved to 3.1-02 and re-exported to avoid accidental
importing of the older P_Alarm with one of these instruction.
The Library Alarm Configuration document has been updated to reflect the revised P_Alarm interface.
Refer to it for instructions in setting up FTAE alarms.
The Alarms Builder tool has been updated to detect P_Alarm 3.1-02 and build the correct FTAE
configuration to match.
COMPATIBILITY:
The operation of the existing Status and Control bits is unchanged. Only the new Control bits
(.Com_AE.7 for Suppress, .Com_AE.10 for Disable) have been added. Therefore, an existing FTAE
configuration will work with the new P_Alarm 3.1-02 as it worked with P_Alarm 3.1-01 and earlier.
(However, there will still be the possibility of alarms being left disabled after an FTAE import.)
To use the new FTAE configuration which prevents leaving alarms disabled after an import, however,
updating to P_Alarm 3.1-02 is REQUIRED.
Compatibility Summary:
If you update to the P_Alarm v3.1-02 AOI, it is NOT required to modify the FTAE configuration
(but you may have alarms stay disabled after an alarm import.
If you update the FTAE configuration to use the above bit assignments, you MUST update
P_Alarm to v3.1-02.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 13
4. Steam Table Add-On Instruction Additions
The following new-for-3.1-02 instructions are added to the Steam Table Add-On Instructions:
These instructions implement all inverse steam table equations for water/steam properties defined by
the International Association for the Properties of Water and Steam Industrial Formulation 1997
(IAPWS-IF97) inverse equations.
I_AB56IF8H
I_AB56IF16H
These instructions have improved checking for MSG Error or HART Error when getting HART device data.
If a channel is not used or does not have a HART instrument, the descriptive strings for the channel are
filled in with text indicating that no HART data were received.
System Features
The following features were added for this version of the library.
(RA-BAS) P_DIn-Quick.gfx
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 14
(RA-BAS-ME) P_DIn-Quick.gfx
Upgrade Note: Because of tasking model changes in controllers for V24, the L_CPU_24 instruction
requires an extra MSG (Message) to obtain all the CPU utilization data from the Logix controller. If you
are upgrading your controller from a previous firmware release to V24, you should follow this procedure
(while still offline) to update the L_CPU Add-On Instruction if you use it in your application:
Make all the other changes needed to your application in Studio 5000 Logix Designer V24 first.
Save a copy of your application.
Open the Controller Organizer and expand the folder of Add-On Instructions (AOIs). Right-click
on the L_CPU_xx AOI (where 'xx' is your current firmware major revision) and select Cross
Reference.\
In the Cross Reference window, double-click the instance of L_CPU_xx to go to the rung of code
containing the instance.
There should be only one instance of the L_CPU instruction in the application!
Delete the rung. Note the location. You can cursor up one rung and leave the ladder editor
window open -- this way, when you import the L_CPU_24 rung, it will land in the same location.
Open the Controller Tags. If it is not already selected, choose the Edit Tags tab at the bottom
left. Scroll thru the tags and delete ALL eighteen L_CPU* tags. Close the Controller Tags
window.
In the Controller Organizer, in the Add-On Instructions folder, right-click on the L_CPU_xx Add-
On Instruction and select Delete. Confirm the deletion.
In the Controller Organizer, expand the Data Types folder, then expand the User-Defined types
folder. Right-click on the L_CPU_Out data type and select Delete. Confirm the deletion. Then
repeat this step on the other five L_CPU_* UDTs.
You must delete the L_CPU_Out UDT before you can delete the others.
Return to the ladder editor. In the left margin, on the rung BEFORE where you deleted the old
L_CPU rung, right-click and select Import Rung(s)... Navigate to the folder where you
downloaded the V3.1-03 library, then to ...Files\Logix Diagnostic Objects Library\Logix Add-On
Instructions. Select the L_CPU_24_3_1-03_RUNG.L5X file and click OK. In the import dialog,
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 15
there should be no "red flags" and all the components should show "Create" as their action.
Click OK to import the rung.
If you have a Continuous Task in your application, modify the "Instance" of the GSV to the Task
Object to point to you Continuous Task. If you do not have a Continuous Task in your
application, replace the GSV instruction with a CLR instruction with the same destination
(L_CPU.Cfg_ContTaskInstance).
(RA-BAS) P_PIDE-Quick.gfx
(RA-BAS-ME) P_PIDE-Quick.gfx
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 16
Anomalies
The following anomalies were resolved in this release.
(RA-BAS) P_E1PlusE-Faceplate
(RA-BAS) P_E3Ovld-Faceplate
(RA-BAS) P_E300Ovld-Faceplate
(RA-BAS-ME) P_E1PlusE-Faceplate
(RA-BAS-ME) P_E3Ovld-Faceplate
(RA-BAS-ME) P_E300Ovld-Faceplate
Additionally, the ME version of the Overload Faceplates added visibility to all TabPaneGrp_X tabs.
The following files were changed to set the TabPanelGrp_Help object’s GroupVisible property to True
(RA-BAS-ME) P_E1PlusE-Help.gfx
(RA-BAS-ME) P_E3Ovld-Help.gfx
(RA-BAS-ME) P_E300Ovld-Help.gfx
4. P_AIn94H Faceplate
Removed extraneous characters from the display commands used to edit the Minimum and Maximum
EU Scaled values on the Engineering Tab of the P_AIn94H faceplate “(RA-BAS) P_AIn94H-Faceplate.gfx”
(FactoryTalk View SE Library only).
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 17
5. P_DoseFM Animation
Modified the P_DoseFM Display Elements to include color animation for the states “Flow Starting”,
“Dribble Starting”, and “Flow Stopping”. The new states use the same blue “transition state” color as
“Dribble”. This change affected the following Global Object files:
6. Dosing Tool-Tips
Corrected the tool-tips for the Clear Totalizer, Bump, and Check Tolerance buttons on the P_DoseFM
and P_DoseWS faceplates and quick displays. The following displays were affected by this change
(FactoryTalk View SE Library only):
(RA-BAS) P_DoseFM-Faceplate.gfx
(RA-BAS) P_DoseFM-Quick.gfx
(RA-BAS) P_DoseWS-Faceplate.gfx
(RA-BAS) P_DoseWS-Quick.gfx
(RA-BAS) P_PF753-Faceplate.gfx
(RA-BAS-ME) P_PF753-Faceplate.gfx
9. L_TaskMon Faceplate
TabPanelGrp_Trend\Trend1 object was removed.
11. P_PF755
In the (RA-BAS-ME) P_PF755-Faceplate.gfx file the
TabPanelGrp_Home\GroupSpeedAndDirection\GroupSpeedControls\ndd_Val_SpeedRef\ndd_NumericD
isplay1 was changed to use {#1.cfg_SpeedRefEU}
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 18
12. P_ AInAdv-Faceplate
In the (RA-BAS) P_AInAdv-Faceplate.gfx file a GOP was added to
Group_HelpAndCloseButtons\GO_ButtonClosewTabReset #102 Value = #1.Inf_Tab
13. P_Motor-Faceplate
Added GOPs to TabPanelGrp_Home\StartStopGroup\Group31\GO_OverloadButton #103=#2, #120=#3,
#121=#4
(RA-BAS) P_ValveC-Faceplate.gfx
(RA-BAS-ME) P_ValveC -Faceplate.gfx
(RA-BAS-ME) P_SMC50-Faceplate.gfx
(RA-BAS-ME) P_SMCFlex-Faceplate.gfx
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 19
Flex does not have jogging, yet it is desired that the SMC objects use the same display elements. The
following files were affected by this change:
(RA-BAS) P_PIDE-Faceplate.gfx
(RA-BAS-ME) P_PIDE-Faceplate.gfx
Functional Changes
The following functional changes were made in the library for this release.
The AOI logic was modified to prevent generating pulse outputs to open or close the valve under
additional fault conditions, including I/O Fault and invalid position feedback.
The AOI logic was modified to make the overall Valve Status more consistent with the device
state. Previously, the AOI Val_Sts would show the "At Target" state when the valve CV output
ramp had completed, even if the valve position feedback did not show the valve had yet
reached the requested position. Now the state will continue to show the valve opening or
closing until the valve position feedback shows the valve at a position near the CV (specifically, a
position at which pulse outpus to move a motor-driven actuator would no longer be generated).
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 20
SUMMARY OF FILES IN THIS RELEASE
This release includes the following Add-On Instructions, Global Object files and Graphics files:
RSLogix 5000 Add-On Instructions (L5X import files) (Object names in bold are new for Version 3.1
of the Library; Revisions and Dates in bold have been updated since the previous revision):
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 21
Object Description Revision AOI Edit Date
P_AInMulti Multiple Analog Input (up to 8) 3.1-02 September 30, 2014
P_AInPAR Profibus PA Analog Input on 1788-EN2PAR 3.1-02 September 30, 2014
P_Alarm Alarm (sub-block) 3.1-02 September 30, 2014
P_AOut Analog Output 3.1-02 September 30, 2014
P_D4SD Discrete 2-, 3- or 4-State Device 3.1-02 September 30, 2014
P_DIn Discrete Input 3.1-02 September 30, 2014
P_DoseFM Dosing with Flowmeter 3.1-02 September 30, 2014
P_DoseWS Dosing with Weigh Scale 3.1-02 September 30, 2014
P_DOut Discrete Output (with pulsing) 3.1-03 January 23, 2014
P_E1PlusE E1 Plus Overload Relay (EtherNet/IP) (Rung and 3.1-02 September 30, 2014
AOI exports both included)
P_E300Ovld E300 Overload Relay (EtherNet/IP) (Rung and 3.1-02 September 30, 2014
AOI exports both included)
P_E3Ovld E3 / E3Plus Overload Relay (Rung and AOI 3.1-02 September 30, 2014
exports both included)
P_Fanout Analog Fanout (up to 8 CVs) 3.1-01 September 3, 2014
P_Gate Threshold Status/Alarm Gate 3.1-01 September 3, 2014
P_HiLoSel High- or Low-Select 3.1-01 September 3, 2014
P_Logic Boolean Logic with Snapshot 3.1-01 September 3, 2014
P_Mode Mode (sub-block) 3.1-01 September 3, 2014
P_Motor Single-Speed Motor 3.1-03 January 20, 2015
P_Motor2Spd Two-Speed Motor 3.1-03 January 20, 2015
P_MotorHO Hand Operated Motor 3.1-02 September 30, 2014
P_MotorRev Reversing Motor 3.1-03 January 20, 2015
P_nPos n-Position (up to 8) Device 3.1-01 September 3, 2014
P_Perm Permissives 3.1-01 September 3, 2014
P_ PF52x PowerFlex 523 / 525 Variable Frequency Drive 3.1-03 January 20, 2015
(Rung and AOI exports both included)
P_PF753 PowerFlex 753 Variable Speed Drive (Rung and 3.1-03 January 20, 2015
AOI exports both included)
P_PF755 PowerFlex 755 Variable Speed Drive (Rung and 3.1-03 January 20, 2015
AOI exports both included)
P_PIDE PlantPAx Mode/Alarm Wrapper for PIDE built-in 3.1-02 September 30, 2014
instruction
P_PIDE_only Container for PIDE built-in instruction 3.1-01 September 3, 2014
P_Prompt Manual Prompt 3.1-01 September 3, 2014
P_PTComp Pressure/Temperature Compensated Flow 3.1-01 September 3, 2014
P_Reset Reset 3.1-01 September 3, 2014
P_ResInh Restart Inhibit 3.1-01 September 3, 2014
P_RunTime Run Time and Starts 3.1-01 September 3, 2014
P_Seq Simple Sequencer (Rung and AOI exports both 3.1-02 September 30, 2014
included)
P_SMC50 SMC-50 Smart Motor Controller (Rung and AOI 3.1-02 September 30, 2014
exports both included)
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 22
Object Description Revision AOI Edit Date
P_SMCFlex SMC-Flex Smart Motor Controller (Rung and 3.1-02 September 30, 2014
AOI exports both included)
P_StrapTbl Tank Strapping Table 3.1-01 September 3, 2014
P_ValveC Control Valve 3.1-03 January 20, 2015
P_ValveHO Hand Operated Valve 3.1-02 September 30, 2014
P_ValveMO Motor Operated Valve 3.1-02 September 30, 2014
P_ValveMP Mix-Proof Valve 3.1-02 September 30, 2014
P_ValveSO Solenoid Operated Valve 3.1-02 September 30, 2014
P_ValveStats 2-State Valve Statistics 3.1-01 September 3, 2014
P_VSD Variable Speed Drive (Rung and AOI exports 3.1-03 January 20, 2015
both included)
Library Release Version 3.1-03 Add-On Instruction Revisions and Dates
NOTE: The same Add-On Instructions are used by both FactoryTalk View SE and FactoryTalk View ME.
NOTE: For your convenience, additional sets of Add-On Instructions, not part of the Rockwell Automation
Library of Process Objects, are included in the distribution. These include Steam Table lookup,
Sequencing logic, Time and Date Math, and LINT (64-bit Integer) / LTIME (64-bit Time) Math.
FactoryTalk View SE Global Object Files (Object names in bold are new for Version 3.1 of the Library;
Revisions and Dates in bold have been updated since the previous revision):
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 23
Object Revision Date
(RA-BAS) Process Alarm Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Faceplate Analog Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Faceplate Misc Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Faceplate Motor Objects.ggfx 3.1-02 January 23, 2015
(RA-BAS) Process Faceplate Valve Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Graphics Library.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Help Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Interlock Objects.ggfx 3.1-01 September 3, 2014
(RA-BAS) Process Mode Library.ggfx 3.1-01 September 3, 2014
(RA-EH) Instrument Faceplate Objects.ggfx 3.1-01 September 3, 2014
(RA-EH) Instrument Graphics Library.ggfx 3.1-01 September 3, 2014
(RA-Seq) Standard Objects.ggfx 3.1-01 September 3, 2014
(RA-UI) Prompt Objects.ggfx 3.1-01 September 3, 2014
Library Release Version 3.1-03 FTView SE Global Object File Revisions and Dates
FactoryTalk View SE Graphics Files (Object names in bold are new for Version 3.1 of the Library;
Revisions and Dates in bold have been updated since the previous revision):
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 24
Object Revision Date
(RA-BAS) Built-In Totalizer-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) Built-In TotalizerTgt-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) Common-AnalogEdit.gfx 3.1-01 September 3, 2014
(RA-BAS) L_CPU-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) L_CPU-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) L_Redun-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) L_Redun-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) L_TaskMon-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) L_TaskMon-Summary.gfx 3.1-01 September 3, 2014
(RA-BAS) Logix-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) Logix-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIChan-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIChan-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn56H-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn56H-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AIn94H-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_AIn94H-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInEIP-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInEIP-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInFFR-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInFFR-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInPAR-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInPAR-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInAdv-Faceplate.gfx 3.1-02 October 1, 2014
(RA-BAS) P_AInAdv-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInAdv-Quick.gfx 3.1-02 October 1, 2014
(RA-BAS) P_AInDual-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInDual-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInDual-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInMulti-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInMulti-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AInMulti-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Alarm-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Alarm-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AOut-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AOut-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_AOut-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_D4SD-Config.gfx 3.1-01 September 3, 2014
(RA-BAS) P_D4SD-Faceplate.gfx 3.1-01 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 25
Object Revision Date
(RA-BAS) P_D4SD-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_D4SD-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DIn-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DIn-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DIn-Quick.gfx 3.1-00 January 23, 2015
(RA-BAS) P_DoseFM-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_DoseFM-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DoseFM-Quick.gfx 3.1-02 January 23, 2015
(RA-BAS) P_DoseWS-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_DoseWS-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DoseWS-Quick.gfx 3.1-02 January 23, 2015
(RA-BAS) P_DOut-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DOut-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_DOut-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_E1PlusE-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_E1PlusE-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_E3Ovld-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_E3Ovld-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_E300Ovld-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_E300Ovld-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Fanout-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Fanout5-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Fanout -Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Gate-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_HiLoSel-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_HiLoSel-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Intlk-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_IntlkPerm-Help.gfx 3.1-02 January 23, 2015
(RA-BAS) P_Logic-Config.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Logic-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Logic -Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Mode-Config.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Mode-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor2Spd-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor2Spd-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Motor2Spd-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_MotorHO-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_MotorHO-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_MotorHO-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_MotorRev-Faceplate.gfx 3.1-01 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 26
Object Revision Date
(RA-BAS) P_MotorRev-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_MotorRev-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_nPos-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_nPos-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_nPos-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_Perm-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_PF52x-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_PF52x-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_PF753-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_PF753-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_PF755-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_PF755-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ PIDE-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_ PIDE-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ PIDE-Quick.gfx 3.1-02 January 23, 2015
(RA-BAS) P_ResInh-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_RunTime-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMC50-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMC50-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMC50-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMCFlex-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMCFlex-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_SMCFlex-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveC-Faceplate.gfx 3.1-02 January 23, 2015
(RA-BAS) P_ValveC-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveC-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveHO-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveHO-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveHO-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMO-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMO-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMO-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMP-Config.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMP-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMP-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveMP-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveSO-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveSO-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveSO-Quick.gfx 3.1-01 September 3, 2014
(RA-BAS) P_ValveStats-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_VSD-Faceplate.gfx 3.1-01 September 3, 2014
(RA-BAS) P_VSD-Help.gfx 3.1-01 September 3, 2014
(RA-BAS) P_VSD-Quick.gfx 3.1-01 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 27
Object Revision Date
(RA-EH) I_EH_FlowMeter-Faceplate.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Config.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Config-MultiStep.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Config-Step.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-DeleteStep-Confirm.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Detail.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Faceplate.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Help.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-InputForce.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-InsertStep-Confirm.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Quick.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-Test.gfx 3.1-01 September 3, 2014
(RA-Seq) P_Seq-TimerForce.gfx 3.1-01 September 3, 2014
(RA-UI) P_Prompt-Config.gfx 3.1-01 September 3, 2014
(RA-UI) P_Prompt-Response.gfx 3.1-01 September 3, 2014
(RA-UI) P_Prompt-Select.gfx 3.1-01 September 3, 2014
Library Release Version 3.1-03 FTView SE Graphics File Revisions and Dates
NOTE: The pop-up data entry screen for the FTView SE library ‘(RA-BAS) Common-AnalogEdit.gfx’ uses
version 11.0.8000.0 of the DLL ‘FM20.DLL’. If you have a newer version of the ‘FM20.DLL’, no action is
required; however, you will receive a warning in the diagnostic log upon use. This situation can be
resolved by importing (RA-BAS) Common-AnalogEdit.gfx into your project again. On Distributed FTView
SE systems, Client Stations should have the same version of the ‘FM20.DLL’ as the Server.
FactoryTalk View ME Global Object Files (Object names in bold are new for Version 3.1 of the
Library; Revisions and Dates in bold have been updated since the previous revision):
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 28
Object Revision Date
(RA-BAS-ME) P_nPos Graphics Library.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) P_PID Graphics Library.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) P_SMC Graphics Library.ggfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_ValveMP Graphics Library.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) P_VSD Graphics Library.ggfx 3.1-01 January 23, 2014
(RA-BAS-ME) Process Alarm Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Faceplate Analog Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Faceplate Misc Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Faceplate Motor Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Faceplate Valve Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Graphics Library.ggfx 3.1-01 January 23, 2014
(RA-BAS-ME) Process Help Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Interlock Objects.ggfx 3.1-00 October 1, 2014
(RA-BAS-ME) Process Mode Objects.ggfx 3.1-00 October 1, 2014
(RA-EH-ME) Instrument Faceplate Objects.ggfx 3.1-00 September 3, 2014
(RA-EH-ME) Instrument Graphics Library.ggfx 3.1-00 September 3, 2014
(RA-Seq-ME) Standard Objects.ggfx 3.1-00 October 1, 2014
(RA-UI-ME) Prompt Objects.ggfx 3.1-01 January 23, 2014
Library Release Version 3.1-03 FTView ME Global Object File Revisions and Dates
FactoryTalk View ME Graphics Files (Object names in bold are new for Version 3.1 of the Library;
Revisions and Dates in bold have been updated since the previous revision):
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 29
Object Revision Date
(RA-BAS-ME) Built-In PIDE-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In PIDE-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In RMPS-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In RMPS-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In Totalizer-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In Totalizer-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Built-In TotalizerTgt-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Common-AnalogEdit.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) L_CPU-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) L_CPU-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) L_Redun-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) L_Redun-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) L_TaskMon-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) L_TaskMon-Summary.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Logix-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) Logix-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIChan-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIChan-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn56H-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn56H-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn94H-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AIn94H-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInAdv-Faceplate.gfx 3.1-02 January 23, 2014
(RA-BAS-ME) P_AInAdv-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInAdv-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInDual-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInDual-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInDual-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInEIP-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInEIP-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInFFR-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInFFR-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInMulti-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInMulti-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInMulti-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInPAR-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AInPAR-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Alarm-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Alarm-Help.gfx 3.1-00 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 30
Object Revision Date
(RA-BAS-ME) P_AOut-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AOut-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_AOut-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_D4SD-Config.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_D4SD-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_D4SD-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_D4SD-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DIn-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DIn-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DIn-Quick.gfx 3.1-00 January 23, 2014
(RA-BAS-ME) P_DoseFM-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DoseFM-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DoseFM-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DoseWS-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DoseWS-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DoseWS-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DOut-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DOut-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_DOut-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_E1PlusE-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_E1PlusE-Help.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_E3Ovld-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_E3Ovld-Help.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_E300Ovld-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_E300Ovld-Help.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_Fanout-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Fanout5-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Fanout -Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Gate-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_HiLoSel-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_HiLoSel-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Intlk-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_IntlkPerm-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Logic-Config.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Logic-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Logic -Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Logic-SnapShot.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Mode-Config.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Mode-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Motor-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_Motor-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Motor-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Motor2Spd-Faceplate.gfx 3.1-00 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 31
Object Revision Date
(RA-BAS-ME) P_Motor2Spd-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Motor2Spd-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorHO-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorHO-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorHO-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorRev-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorRev-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_MotorRev-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_nPos-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_nPos-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_nPos-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_Perm-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_PF52x-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_PF52x-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_PF753-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_PF753-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_PF755-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_PF755-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ PIDE-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_ PIDE-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ PIDE-Quick.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_ResInh-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_RunTime-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_SMC50-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_SMC50-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_SMC50-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_SMCFlex-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_SMCFlex-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_SMCFlex-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveC-Faceplate.gfx 3.1-01 January 23, 2014
(RA-BAS-ME) P_ValveC-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveC-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveHO-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveHO-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveHO-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMO-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMO-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMO-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMP-Config.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMP-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMP-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveMP-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveSO-Faceplate.gfx 3.1-00 September 3, 2014
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 32
Object Revision Date
(RA-BAS-ME) P_ValveSO-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveSO-Quick.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_ValveStats-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_VSD-Faceplate.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_VSD-Help.gfx 3.1-00 September 3, 2014
(RA-BAS-ME) P_VSD-Quick.gfx 3.1-00 September 3, 2014
(RA-EH-ME) I_EH_FlowMeter-Faceplate.gfx 3.1-00 September 3, 2014
Library Release Version 3.1-03 FTView ME Graphics File Revisions and Dates
Description Revision
Endress+Hauser Analysis Device Profiles 1.14
Endress+Hauser Flow Device Profiles 1.52
Rockwell Automation E1Plus Device Profile 1.01.00
Rockwell Automation E300 Device Profile 2.0.011
Rockwell Automation PowerFlex 5-Class Device Profiles 1.04
Rockwell Automation Drives Device Profiles 4.06
Rockwell Automation Hiprom 1788-EN2FFR Device Profile 1.002
Rockwell Automation Hiprom 1788-EN2PAR Device Profile 2.005
Library Release Version 3.1-03 Add-On Profiles Used
NOTE: Reference Manuals for the Rockwell Automation Library of Process Objects are posted on the
Rockwell Automation Literature Library:
(http://literature.rockwellautomation.com/idc/groups/public/documents/webassets/browse_category.
hcst).
Shortcuts to the Reference Manuals are included in the Documents folder of the Rockwell Automation
Library of Process Objects ZIP file.
Rockwell Automation Library of Process Objects, Version 3.1-03 Release Notes, January 23, 2015 Page 33