Professional Documents
Culture Documents
406d Underwater Networking
406d Underwater Networking
7. The Primary part of the network built under water using sensor nodes is referred as _________
A. Underwater Sensor Networks
B. Underwater Node Networks
C. Water Networks
D. Sensor Networks
ANSWER: A
11. In 3-D dimensional underwater networks, the nodes are deployed in different _____
A. Depth
B. Length
C. Width
D. Diameter
ANSWER: A
12. The Two-dimentional Underwater Sensor Networks are commonly used for ______
A. Pollution Monitoring
B. Fisheries Monitoring
C. Ocean Bottom Monitoring
D. Ocean Surface Monitoring
ANSWER: C
13. The Three-dimensional Underwater Sensor Networks are commonly used for ________
A. Ocean Surface Monitoring
B. Ocean Bottom Monitoring
C. Ocean Row Monitoring
D. Ocean Column Monitoring
ANSWER: D
26. To assimilate the data into numerical models in real or near-real time, and predict future conditions with
minimal error from the sea is referred as
A. Underwater Sampling
B. Sea Sampling
C. Ocean Study
D. Ocean Sampling
ANSWER: D
27. Adding automatic feedback control for robustness and automation in Ocean grounds id called as
A. adaptive sampling.
B. automatic sampling
C. Ocean Sampling
D. Sampling
ANSWER: A
30. Ocean bottom sensor nodes are deemed to enable applications for
A. Geographic data collection,
B. Oceanographic data collection
C. ocean pulse collection
D. ocean bottom application
ANSWER: B
31. Acoustic communications are the typical __________ layer technology in underwater networks.
A. Physical
B. Datalink
C. Network
D. Transport
ANSWER: A
32. In UWSN, _______ is limited and usually batteries can not be recharged, also because solar energy cannot
be exploited;
A. Electricity
B. Power Supply
C. Battery power
D. Thermal Power
ANSWER: C
35. Which one of the following oil pollutant in the Sea is _____
A. Petroleum Gas
B. Petroleum Oil
C. Petroleum Hydrocarbon
D. Petroleum Hydroxide
ANSWER: C
37. _________or radioactive decay is the name given to the natural process by which the atomic structure of
an atom changes to a more stable state.
A. Radioactivity
B. Optical Activity
C. Ocean Activity
D. Fiber Activity
ANSWER: A
38. Dredged material and______ are the best representatives for the category of solid wastes.
A. Coral Wastages
B. Oil Waste
C. Plastic debris
D. Golden debries
ANSWER: C
42. _______ is a significant region of transporting the pollutants physically and chemically.
A. Ships and Submarines
B. Surface Station
C. Sea Shore
D. Estuaries
ANSWER: D
44. _________ is divided into three areas, a) salt marshes and coastal wetlands, 2) continental shelf zone, and
3) enclosed seas.
A. The Water zone
B. The Seabed
C. The coastal zone
D. The terrestrial zone
ANSWER: C
45. _______ can able to move the pollutants in and off the coaster region
A. The Wind
B. The Rain
C. The Waterfall
D. The Smell
ANSWER: A
46. The ______ sensors monitor the underwater surroundings, generate data and store it in the sensor buffer.
A. The mobile
B. The link
C. The Static
D. The aquatic
ANSWER: C
47. Which one of the following is the Simulator for Data Analysis for Underwater Applications?
A. WaterSim
B. OceanSim
C. DataSim
D. AquaSim
ANSWER: D
48. The ___ is having the three layers, namely sensor-layer,AUV-layer,and surface-layer.
A. The Hierarchical Underwater Network
B. Vertical Underwater network
C. Flat Underwater network
D. 3D Underwater Networks
ANSWER: A
49. A potential solution is the use of a mobile autonomous underwater vehicle (AUV) equipped with an
_______ to gather data from the sensors.
A. acoustic keyboard
B. acoustic speakers
C. acoustic modem
D. acoustic drivers
ANSWER: C
50. _________ is one of the method to acquire data from a underwater sensor networks
A. Polling
B. Parting
C. Assembling
D. Collecting
ANSWER: A
53. Is a cable is to be designed for use on 1000 kV, which insulation would you prefer ?
A. Polyvinyle chloride
B. Vulcanised rubber
C. Impregnated paper
D. Compressed SFe gas
ANSWER: D
54. If a power cable and a communication cable are to run parallel the minimum distance between the two, to
avoid interference, should be
A. 2 cm
B. 10 cm
C. 50 cm
D. 400 cm
ANSWER: C
58. ________ is a type of transmission impairment in which the signal loses strength due to the resistance of
the transmission medium.
A. Distortion
B. Attenuation
C. Noise
D. Decibel
ANSWER: B
61. ________ is a type of transmission impairment in which the signal loses strength due to the different
propagation speeds of each frequency that makes up the signal.
A. Noise
B. Distortion
C. Attenuation
D. Decibel
ANSWER: B
62. How fast does the speed of sound travel through water?
A. 484mts
B. 1484m/s
C. 1000m/s
D. 1484mts
ANSWER: B
64. _______ is a data structure that improves the speed of data retrieval operations on a database table at the
cost of additional writes and storage space to maintain the index data structure.
A. A database index
B. The RDBMS
C. DBMS
D. Stack
ANSWER: A
65. The ________transmiss ion of data is usually unrealistic, due to the transmission cost.
A. Discrete
B. delayed
C. continuous
D. timely
ANSWER: C
66. It would be too ______to directly send data to be indexed from the Sensor
A. Inexpensive
B. Instructed
C. Delayed
D. Expensive
ANSWER: D
67. A specific re al-time spatio-temporal database management must be coupled with a specific archivin g
management for the Acoustic Sensor Networks called
A. Dataserver
B. Datawarehouse
C. Database
D. Datamule
ANSWER: B
68. The current indexing patterns use the time-stamps and sensor identifiers for the ________
A. Query Processing
B. Sensor Processing
C. Data Processing
D. Node Processing
ANSWER: A
69. _____ usually focus on finding data from a specific sensor within a given temporal interval.
A. Sensor Data
B. Querying patterns
C. Indexing
D. Databases
ANSWER: B
70. A Balance between the Energy efficiency and Data Accuracy is to managed in ______
A. Sensor Networks
B. Networks
C. Databases
D. Ocean
ANSWER: A
73. A channel displaying both time delay and frequency dispersion is known as a
A. Singly spread channel
B. Void spread channel
C. doubly spread channel.
D. Propagation channel
ANSWER: C
74. ______is also an important design criterion as the energy consumption of acoustic modems is generally in
the range 1-100 watts while transmitting.
A. Delay
B. Energy Efficiency
C. Attenuation
D. Bit error rate
ANSWER: B
75. The _________ simulation toolkit is a generic tool for the underwater acoustics communication
community to test and develop underwater acoustic communication systems
A. Underwater
B. Aquafina
C. SimWater
D. AquaTools
ANSWER: D
78. Sea surface temperature measurements are confined to the top portion of the ocean, known as the _______
A. Data link layer
B. physical layer
C. network layer
D. near-surface layer.
ANSWER: D
80. ________ is one of the website provide the sea level temperature for all parts of the world attached with
sea.
A. www.sea-temperature.com
B. www.sea.com
C. www.temperature.com
D. www.tempdisplay.com
ANSWER: A
81. A _____ is any disturbed state of an environment or astronomical body's atmosphere especially affecting
its surface, and strongly implying severe weather.
A. Lightning
B. Thunder
C. Storm
D. Tsunami
ANSWER: C
82. ______conditions out at sea are defined as having sustained winds of 48 knots (55 mph or 90 km/h) or
greater.
A. Ocean Storm
B. Storm
C. Waves
D. Wind
ANSWER: A
83. The name of storm _____ is given to systems that develop over the Atlantic or the eastern Pacific Oceans.
A. storm
B. vardha
C. wind
D. hurricane
ANSWER: D
84. The name of the ocean storm is given to the systems that develop over North Pacific and Philippines is
_______
A. tsunami
B. typhoons
C. hurricane
D. storm
ANSWER: B
85. The name of the ocean storm is given to the systems that develop over South Pacific and Indian Ocean is
_______
A. cyclones
B. typhoons
C. hurricanes
D. tsunami
ANSWER: A
86. ______ also known as a seismic sea wave, is a series of waves in a water body caused by the displacement
of a large volume of water, generally in an ocean or a large lake.
A. Tsunami
B. Wind
C. hurricane
D. Typhoon
ANSWER: A
90. Submarine cables carry more than--------------- percentage of international voice and data traffic
A. 95
B. 75
C. 50
D. 80
ANSWER: A
93. In the structure of fiber, the light is guided through the core due to total internal ______
A. reflection
B. refraction
C. diffraction
D. dispersion
ANSWER: A
95. The order of the atmospheric layers, starting from closest to the surface to the top of the atmosphere, is
A. Mesosphere, Troposphere, Thermosphere, Stratosphere
B. Troposphere, Stratosphere, Mesosphere, Thermosphere
C. Thermosphere, Mesophere, Troposphere, Stratosphere
D. Troposphere, Mesosphere, Stratosphere, Thermosphere
ANSWER: B
97. What is the relationship of absorbed solar to outgoing infrared in the tropics?
A. Absorbed Solar<>emitted IR
B. Absorbed Solar<emitted IR
C. Absorbed Solar = emitted IR
D. It varies throughout the year
ANSWER: A
98. What is the relationship of absorbed solar to outgoing infrared at the poles?
A. Absorbed Solar>emitted IR
B. Absorbed Solar<emitted IR
C. Absorbed Solar = emitted IR
D. This varies depending on time of year.
ANSWER: B
103. Channels can be shared in an area with many subscribers with help of
A. multi casting
B. frequency sharing
C. data sharing
D. time sharing
ANSWER: D
108. Seismic waves which travel through interior part of earth are known as
A. body waves
B. surface waves
C. inner waves
D. deep waves
ANSWER: A
109. Waves which are responsible for back and forth movement of earth are called
A. s wave
B. p wave
C. q wave
D. w wave
ANSWER: B
113. There are 3 types of seismic waves: _____, _____, and _____.
A. P, L, and C
B. P, L, and X
C. Q, S, and R
D. A, B, and C
ANSWER: A
116. ___________ are two parameters that vary over different types of deployments of underwater sensor
networks.
A. mobile
B. density
C. mobility and density
D. militry networks
ANSWER: C
118. Propagation of ________in the frequency range of interest for communication can be described in several
stages
A. electromagnetic waves
B. radio waves
C. frequency waves
D. acoustic waves
ANSWER: D
120. The ________ rate defines the number of data elements sent in 1s; the ______ rate is the number of
signal elements sent in 1s.
A. signal; data
B. data; signal
C. baud; bit
D. none of the above
ANSWER: B
121. The most common technique to change an analog signal to digital data is called __________.
A. sampling
B. PAL
C. PCM
D. none of the above
ANSWER: C
127. _________ and ____________ are the two types of Satellites used for Underwater Networks
A. POES and GOES
B. POES and MOES
C. POES and ROES
D. GOES and ROES
ANSWER: A
129. The speed of light in plastic compared to the speed of light in air is
A. Slower
B. Faster
C. The same
D. Either lower or faster
ANSWER: A
142. Which multiple access technique is used by standard for wireless LAN?
A. CDMA
B. CSMA/CA
C. ALOHA
D. none of the mentioned
ANSWER: B
145. The hadal zone which includes the oceanic trenches, lies between ?
A. 5000 to 6000
B. 6000 to 10000
C. 7000 to 5000
D. 3000 to 5000
ANSWER: B
150. The frequency ranges from 300 KHz to 3 MHz is used for
A. AM radio transmission
B. TV transmission
C. FM radio transmission
D. Microwave communication, satellite and radar
ANSWER: A
Staff Name
Vanitha K .