Professional Documents
Culture Documents
Papers Revised
Papers Revised
METHODOLOGY
Materials:
2 shoe insole
12 piezoelectric generators
100 mm wiring
Soldering iron
Soldering lead
Ruler
Multimeter
Cardboard
Procedure:
1. Start off by gathering and preparing the materials needed for creating the piezoelectric
insole including the solder, soldering iron, 100 mm wiring, 2 shoe insole, 12 piezoelectric
generators, glue gun with glue sticks, ruler, multimeter and cardboard.
2. Place and glue gun the piezo element properly on their respective places below the insole,
prepare your multimeter so that you can ensure that your priezo elements work by setting
foam/cardboard pieces onto each piezo element. Start soldering the piezo elements
together.
4. Create a wireless Arduino controller in order to limit and control the amount of current
sent.
FRAMEWORK OF METHODOLOGY
https://holisticzine.com/human-body-pressure-points
https://www.top10homeremedies.com/news-facts/top-10-acupressure-points-pain-
relief-problems.html
https://www.doctorshealthpress.com/general-health-articles/foot-pressure-points/
https://www.spine-health.com/treatment/pain-management/how-electrotherapy-
works-ease-pain
http://tensunithub.com/how-does-tens-unit-work/
https://www.scienceabc.com/humans/how-many-volts-amps-kill-you-human.html
https://www.medicaldaily.com/electric-shock-electrocution-electrical-current-378242
https://en.wikipedia.org/wiki/Sole_(foot)
https://www.instructables.com/id/Piezoelectric-Shoes-Charge-Your-Mobile-Device-
by-W/
https://www.liveabout.com/what-are-shoe-insoles-2987682