Professional Documents
Culture Documents
Cognitive Wireless Communication Software Defined Radio Sdr-Lab Sdr04
Cognitive Wireless Communication Software Defined Radio Sdr-Lab Sdr04
Features: Description:
• Experiments designed and developed at IIT Delhi The Amitec SDR-LAB is the highest performing
• Learn next generation communication & software programmable hardware transceiver family
convergence technologies (Software Defined of products, which enables engineers to rapidly design
Radio, Cognitive Radio including white spaces, and implement powerful, flexible software defined
Cooperative Communication, Communication over radio systems. The SDR-LAB hardware is ideally
Cellular Network, Femto Cell, Wireless Network, suited for applications requiring high RF performance
Mobile Adhoc Network, Research in 4G/5G) and great bandwidth. Such applications include
• Use with Linux Radio, LabVIEW™, MATLAB physical layer prototyping, dynamic spectrum access
Simulink™ and cognitive radio, spectrum monitoring, record and
• No recurring cost of software or licences playback, and even networked sensor deployment.
• ASIC Architecture: 0.4-4 GHz combines LNA, PA
driver, RX/TX Mixers, RX/TX Filters, Synthesizers, The systems offers MIMO capability with high
RX Gain control, TX power control bandwidth and dynamic range. The USB 3.0 interface
• +5dBm Transmit power serves as the connection between the SDR-LAB and
• -120dBm Sensitivity Receiver the host computer. This enables the user to realize 40
• FPGA programmable transmission and reception MS/s of real-time bandwidth in the receive and
for high performance with low latency transmit directions, simultaneously (full duplex).
• Differential Baseband Signals Two units may be connected to realize a complete 2x2
• Modulation Bandwidth Programmable upto 30 MHz MIMO configuration using the optional MIMO cable.
• Supports both TDD &FDD Full Duplex upto 30MHz
• Calibrated +0.1ppm TCXO External PPS and reference inputs can also be used
• Dual 40 MS/s, 12-bit ADC & DAC to create larger multi-channel systems. The hardware
• Up to 400 MS/s USB 3.0 Data Streaming driver supports Linux, Mac OSX, Windows. ASIC
• MIMO Capability – 2X2 and 4X4 houses complete RF and DAQ subsystems on a
• USB 3.0 Interface to Host Controller single board. It meets the unique architecture required
• 200MHz ARM9 with 512KB embedded SRAM for MIMO systems which are not part of traditional
• Alterra Cyclone FPGA with single cycle access MIMO hardware’s using common clock for RF
memory, 18X18 multipliers for dedicated DSP & subsystems where a continuous RF phase tracking is
programmable general logic elements required. Coupled with these benefits it hosts onboard
• 2X2 MIMO Configurable, Expandable to 4X4 RF Transceiver subsystems capable of tuning
• Works as spectrum analyzer, vector signal source frequencies from 400MHz to 4GHz.
& vector signal analyzer
• Core i3, USB 3.0 Mobile Workstation provided For ease of usage Core i3, USB 3.0 Mobile
• Covers white spaces, broadcast television, public Workstation/Note book Computer provided with linux
safety, land-mobile communications, low-power ubuntu pre loaded and tested with platform for
unlicensed devices, wireless sensor networks, cell repeatable performance and no surprises. Hundreds
phones, amateur radio bands. of examples designed at IIT Delhi are preloaded at
• Future ready from simple FM to WCDMA/HSPA, host cpu provided. The list is growing by the day to
4G-LTE standard to whatever future may hold include most cases as per international curriculum.
• Hundreds of experiments and growing.....
OFDM RADAR