Professional Documents
Culture Documents
Test Results of Gradation For WMM: Lab ID: GCS-TR-02-40602-010 04.06.2014 Date
Test Results of Gradation For WMM: Lab ID: GCS-TR-02-40602-010 04.06.2014 Date
Date: 04.06.2014
Is Sieve Size (mm) Weight Cumulative Cumulative Cumulative % Spec.Limits Vide Table
Retained Weight %of of Passing 400.11 MORTH
(gm) Retained Retained Specification
(gm)
53 0 0 0 100 100
45 351 351 3.5 96.49 95-100
22.4 2475 2826 28.26 71.74 60-80
11.2 2014 4840 48.40 51.60 40-60
4.75
2.36
1925
1247
6765
8012
67.65
80.12
32.35
19.88
25-40
15-30 <, --~~
0.600 1052 9064 90.64 9.36 8-22 lo0
0.075 658 9722 97.22 2.78 0-8 ..::
~
~
Prepared by
Sushma
Lab ID: GCS-TR-02-40602-010
Date: 04.06.2014
Comments·
12.3
24.16
Prepared by
Sushma
i:l
Combined ~lakinessand Elongation lndexes(T.#7i- 30% Max. (Table 400.10 of Morth)
•
~
------- ~\ /
.l 'I\
~1flfc·
Technica~er
«.
u
·
:·n:.)
,,,.--
S~v/Ci4
Lab ID: GCS-TR-02-40602-010
Date: 05.06.2014
Description Trails
1 2
Wt.Of stone pieces (dry) passing ISSieve 12.5mm
but retained in ISSieve lOmm (gm) (Wa) 400 400
•
-7 Maximum allowable Aggregate Impact value for Wet Mix Macadam is 30% (Table-400.10 of
MORTHspecification)
Prepared by
Sushma
Lab ID: GCS-TR-02-40602-010
Date: 13.06.2014
Requirement as per
SI. No I Description Test Result
15:73:1992
1 I Penetration at 25 QC,lOOgms,5sec, 1/10 mm 66 60 to 70
2 I Softening point, QC I 49 I 45 - 55
3 I Specific Gravity I 1.06 I Min. 0.99
-
4 I Ductility at 27QC,cm I 98 I Min. 75
--
5 I FlashPoint, QC 1183 Min. 175
Note:
Prepared by
Sushma
Lab ID: GCS-TR-02-40602-010
Date: 13.06.2014
Date: 14.06.2014
•
Weight of aggregate passing 2.36 mm sieve after the
2 82 84
test= W2 g
U' ·cr::''
~Maximum allowable Aggregate Impact value foj.Bitumlnous Concrete is 24% (Tablesgp..t7 oftl°r,th}-~, _ .1, .•• , ·c-,.,:.,_ 1-1,.,..r
{ -7 F '°" P- ~-
Iv~--------~
I
Sushma Tech~anager
echnical Manager