Professional Documents
Culture Documents
A Study On Soil Consistency in 8 Barangays in Agoncillo, Batangas
A Study On Soil Consistency in 8 Barangays in Agoncillo, Batangas
A Study On Soil Consistency in 8 Barangays in Agoncillo, Batangas
Abstract
In this paper the researchers tackle about the soil consistency of 8 different barangays in
Agoncillo, Batangas. Soil Consistency is the strength with which soil materials are held together
or the resistance of soils of deformation rupture. Soil consistency is measured for wet moist and
dry soil sample. Nowadays people considered the soil consistency whether if their building or
infrastructure are built in a soft ground, or solid ground and also, they should consider the physical
The purpose of this study is to identify the soil consistency in 8 barangays in Agoncillo,
Batangas. The soil consistency which includes moisture content, liquid limit, plastic limit and
plasticity index of soil and also the shrinkage limit test. We also analyze the physical properties
of the 8 barangays in Agoncillo, Batangas. The researcher uses the liquid limit device to obtain
its water content and moisture content of the soil sample. And for the plastic limit the researcher
In this study the researcher will be able to know if the soil in Agoncillo, Batangas are fine-
Consistency is an important characteristic in the case of fine soil, the term consistency
describing the ability of a soil to undergo and recoverable deformation without cracking of
crumbing. The consistency of clays and other cohesive soil is usually described as soft, medium,
stiff, or hard.
The Atterberg Limits represent the qualitative limits of soil with varying water content
where the consistence of a soil is changed from plastic state (plastic Limit PL) to a liquid state
(liquid limit LL) and form a semi-solid state (shrinkage limit SL) to a plastic state. There is probably
no single cause of landslides because a number of factors usually interact to make a soil or rock
prone to land sliding. Parameters like the swelling of soil and the rate of water that infiltrates the
soil at depth helps trigger landslides (Kitutu et al, 2009). Atterberg limits will help determine the
condition of the soil and evaluate its properties in order to know which state soils from landslide
The following questions would be answered according from the data and results of the tests;
• What are the atterberg limits of the soil in Agoncillo, batangas, specifically plasticity,
This paper would only focus on determining the soil consistency at Agoncillo, Batangas
using its Atterberg limits of the soil collected from the selected 8 out of 16 barangays. The
experiment will be done by liquid limit, Plastic limit and Shrinkage limit tests. Testing will be done
using oven-drying method to measure the moisture content. Shrinkage limit would be measure
using TRL method. Liquid limits would be measured using Casagrande method. This experiment
will only use 1 soil sample each from the selected areas in Agoncillo, Batangas.
The experimental research in this study is primarily concerned on determining the soil
consistencies of different soil samples from selected areas. The researchers will determine the
soil consistencies using 1 sample for liquid limit test and plastic limit test and 1 sample for
In order to conduct this study, the soil was collected in its natural state from a depth of 1.0
– 1.5 meters. It is obtained from 8 barangays in Agoncillo, Batangas. The researcher conducted
the Atterberg limit test on the soil samples to determine the soil consistency.
PROCEDURES:
MOISTURE CONTENT DETERMINATION (ASTM D2216)
1. Weigh a tin cup including its cover; identify the cover and its lid. Determine the weight of
the tin cup.
2. Place a representative sample of wet soil in the cup. Determine the weight of wet soul and
tin cup.
4. When the sample has dried to constant weight, obtain the weight of cup and dry soil.
5. Compute the water content. The difference between weight of wet soil plus cup and weight
of dry soil plus cup is the weight of water (W w). Also compute the weight of dry soil (W s).
7. % = W w/W s × 100
8. Repeat until three (3) trials are achieved. Determine the average moisture content.
STANDARD TEST METHODS FOR LIQUID LIMIT, PLASTIC LIMIT, AND PLASTICITY INDEX
OF SOILS (ASTM D 4318 – SECTION 11)
Liquid Limit test
1. Weigh about 200g of the provided air-dried soil sample passing sieve no. 40
3. Mix the soil sample until it appears uniform. A proper blending could take up to 20 minutes.
4. Before using the casagrande, inspect the apparatus to ensure it is in good working
condition, clean and dry the brass cup and set up the device.
5. Using the 1cm. block at the end of the grooving tool, adjust the height of the fall to exactly
1 centimeter.
6. On the brass cup, place a portion of the previously mixed soil sample. Smooth the surface.
8. Turn the handle of the device at a rate of 2 revolutions per second. Count the number of
blows until the two halves of the soil specimen come in contact at the bottom of the groove
along a distance of 12mm due to flow and not by sliding.
9. Take a portion of soil from the brass cup and place it to the tin cup. Then, repeat the
procedure 6-9 to at least 2-4 trials by adding certain amount of water to other soil
consistencies.
10. Determine the moisture content by placing the sample in a tared aluminum can. Oven dry
the samples at 110C to a constant weight and weigh after cooling.
1. Take about 100g of air-dried soil from a thoroughly mixed sample of the soil passing sieve
no. 40. Roll it with fingers or palm of hand on a glass plate. The rate of rolling should be
between 80 to 90 strokes per minute to form a 3mm diameter
2. When the diameter of the thread reaches the correct diameter, break the thread into
several pieces.
3. Continue the process of re-balling and rerolling until the thread crumbles under pressure
required for rolling and soil sample can no longer be rolled into threads.
4. Gather portions of the crumbled soil and place in a tin can and weigh about 15g used to
determine the moisture content. Repeat procedure 2-4 to at least 3 trials.
5. Place the tin cups with crumbled threads in oven. Maintain the temperature at 110o C.
After determining the average of the moisture content. The result is the plastic limit of the
soil.
1. Weigh the shrinkage dish (W sd). Fill the shrinkage dish with water and weigh again (W sd+water).
Determine the volume (V) by getting the difference of W sd+water and W sd and divide it by the unit
weight of water.
V = (W sd+water - W sd) / γ w
2. Grease the inside surface of the shrinkage dish. Place a small portion of the soil pat and
carefully tap the dish to allow the soil pat to flow at the edges. Repeat again until the whole
shrinkage dish is filled. Strike of the excess soil using a straight edge. Record the mass of the soil
and dish.
3. Allow the soil to dry into the air until its color turns from dark to light. Oven dry the sample to
the oven kept at 105 oC. Record the mass of the soil and shrinkage dish. Determine the weight of
the dry soil (mdry). Determine its moisture content.
4. Securely tie the soil pat in a sewing thread. Immerse the soil in molten wax. Allow the wax
coating to cool. Determine the mass of the soil with wax (mdry+wax). Determine the mass of the wax
(mwax). Determine its volume by dividing the mass with the unit weight of the wax (V wax).
5. Using a spring balance, determine the mass of the soil and wax in air (mswa). Immerse the soil
and wax in water and determine its mass in water (msww). Determine the volume of the wax and
soil using the formula:
Vsoil+wax = (mswa-msww)/ γ w
6. Determine the dry volume of soil (Vd) by the difference of the Vsoil+wax and Vwax.
SL = w – (V-Vd) γ w/ms
Results
Moisture
Liquid Limit Plastic Limit Shrinkage Limit
Content
SUBIC-ILAYA 10.5 26.32% 14.04% 4.86%
PANHULAN 21.07 21.32% 13.53% 4.41%
SUBIC - IBABA 11.48 30.77% 13.53% 5.57%
SANTO TOMAS 13.45 37.93% 9.52% 5.45%
BAGONG SIKAT 13.25 37.97% 14.54% 5.48%
SAN TEODORO 23.5 24.43% 9.01% 2.06%
PANSIPIT 11.01 28% 15.04% 9.92%
CORAL 10.7 31.87% 9.52% 5.19%
Source of
SS df MS F P-value F critical
Variation
Between 121204.06926910%
3 40401.35642303%
Groups 1.33842E-
63.38594027 2.94668526
178.468281 12
6.373867178
Within Groups 28
Total 31
Table 1.1 SUBIC-ILAYA (Liquid Limit):
Determination of the Liquid Limit
Description Sample 1 Sample 2 Sample 3
Range 15 – 25 20 - 30 25 – 35
No of blows 20 25 32
Wt. of tin cup (Wc) 25.25 g 25.25 g 25.25 g
Wt. of tin cup + wet soil (Wc + ws) 55.25 g 55.25g 55.25 g
62.93%
60.00%
50.00%
10.00%
0.00%
5 15 25 35
In Figure 1.1 shows thatthe line graph in soil sample 1 falls into (15-20) blows and has a water content of
62.93%, and soil sample 2 falls into (20-30) blows and has a water content of 26.16%, and for soil sample
3 falls into (25-35) blows and has a water content of 21.212%. Therefore, the liquid limit of Subic Ilaya is
26.32%using trend line equation the given moisture content of 25 blows
.
Table 4.1.2 SUBIC-ILAYA (Plastic Limit):
Description Sample 1 Sample 2
Wt. of water (W w) 13 g 15 g
30.00% 30.77%
25.00%
Axis Title
0.2132 0.2132
20.00% 20.20%
10.00%
7.21%
5.00% 0.05
1 10 100
no of blows
In Figure 4.1.2 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 30.77%, and soil sample 2 falls into (20-30) blows and has a water content of 20.20%, and for soil
sample 3 falls into (25-35) blows and has a water content of 7.21%. Therefore, the liquid limit of Panhulan
is 21.32 % using trend line equation the given moisture content of 25 blows
Table 4.2.2 PANHULAN (Plastic Limit):
Description Sample 1 Sample 2
Wt. of water (W w) 12 g 15 g
15.00%
Linear (Series2)
10.00%
5.00%
0.00%
20 25 30 35
In Figure 4.1.3 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 43.37%, and soil sample 2 falls into (20-30) blows and has a water content of 30.77%, and for soil
sample 3 falls into (25-35) blows and has a water content of 20.20%. Therefore, the liquid limit of Subic
Ibaba is 30.77%using trend line equation the given moisture content of 25 blows
.
Table 4.3.2 SUBIC - IBABA (PlasticLimit):
Description Sample 1 Sample 2
Wt. of water (W w) 11 g 16 g
60.00%
50.00%
SANTO TOMAS LIQUID
LIMIT
40.00%
Series2
30.00%
Series3
20.00%
10.00%
0.00%
10 15 20 25 30
In Figure 4.1.4 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 51.70%, and oil sample 2 falls into (20-30) blows and has a water content of 37.93%, and for soil
sample 3 falls into (25-35) blows and has a water content of 16.505%. Therefore, the liquid limit of Santo
Tomas is 37.93% using trend line equation the given moisture content of 25 blows
.
Wt. of water (W w) 8g 11 g
60%
55%
50%
45%
y = -0.0212x + 0.9097
40%
35%
30%
25%
20%
1 10 100
In Figure 4.1.5 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 51.70%, and soil sample 2 falls into (20-30) blows and has a water content of 37.93%, and for soil
sample 3 falls into (25-35) blows and has a water content of 16.505%. Therefore, the liquid limit of
BagongSikatis 37.97% using trend line equation the given moisture content of 25 blows
Wt. of water (W w) 13 g 16 g
35.00%
y = -0.0219x + 0.7918
30.00%
25.00%
20.00%
15.00%
10.00%
1 10 100
In Figure 4.1.6 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 43.47%, and soil sample 2 falls into (20-30) blows and has a water content of 30.77%, and for soil
sample 3 falls into (25-35) blows and has a water content of 20.20%. Therefore, the liquid limit of San
Teodoro is 24.43% using trend line equation the given moisture content of 25 blows
.
Table 4.4.2 SAN TEODORO (Plastic Limit):
Description Sample 1 Sample 2
Wt. of water (W w) 8g 10 g
50%
45%
35%
30%
25%
20%
1 10 100
In Figure 4.1.7 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 43.37%, and soil sample 2 falls into (20-30) blows and has a water content of 30.77%, and for soil
sample 3 falls into (25-35) blows and has a water content of 20.20%. Therefore, the liquid limit of Pansipit
is 28.32 % using trend line equation the given moisture content of 25 blows
Wt. of water (W w) 14 g 16 g
60%
50%
10%
0%
10 15 20 25 30 35
In Figure 4.1.8 shows that the line graph in soil sample 1 falls into (15-20) blows and has a water content
of 60%, and soil sample 2 falls into (20-30) blows and has a water content of 31.87%, and for soil sample
3 falls into (25-35) blows and has a water content of 21.212%. Therefore, the liquid limit of Coral is
31.87% using trend line equation the given moisture content of 25 blows
Wt. of water (W w) 8g 11 g
Discussion
Consistency is an important characteristic in the case of fine soil, the term consistency
describing the ability of a soil to undergo and recoverable deformation without cracking
of crumbing. The consistency of clays and other cohesive soil is usually described as soft,
The Atterberg Limits represent the qualitative limits of soil with varying water
content where the consistence of a soil is changed from plastic state (plastic Limit PL) to
a liquid state (liquid limit LL) and form a semi-solid state (shrinkage limit SL) to a plastic
state. There is probably no single cause of landslides because a number of factors usually
interact to make a soil or rock prone to land sliding. Parameters like the swelling of soil
and the rate of water that infiltrates the soil at depth helps trigger landslides (Kitutu et al,
2009). Atterberg limits will help determine the condition of the soil and evaluate its
properties in order to know which state soils from landslide prone areas are behaving.
Conclusion
the liquid limit of this baranggay is 26.32% ,Inpanhulan the liquid limit is 21.32% , In subic-ibaba
the liquid limit is 30.77% ,In bagongsikat the liquid limit is 39.97%. In pansipit the liquid limit is
28.32. In coral the liquid limit is 31.87%In San Teodoro the liquid limit is 27.317%. In Santo Tomas
the liquid limit is 35.378%.. These liquid limit defined between the liquid and plastic states and as
the lowest water content at which the mass has the capacity to flow as liquid. As we can see the
result that almost 4 of the barangays got the higher moisture content solving by their equation of
their trend line and we concluded that it almost in the liquid state.
In plastic limit, it discussed between the plastic and semi-solid states and is defined as the
lowest water content at which a mass can be easily moulded. In Santo Tomas the plastic limit is
9.524%. In BagongSikat the plastic limit is 14.537%. In San Teodoro the plastic limit is 38.61%.
In Pansipit the plastic limit is 15.038%. In coral the plastic limit is 10.527%. In Panhulan the plastic
limit is 13.534%. In Subic-Ibaba the plastic limit is 13.534%. In Subic-ilaya 14.036%. we can say
easily that the San teodoro is a semi-solid-statesoil, so it has a good factor to use in constructing
Computing those two limits gives the information about the activity of clay and the
toughness of the soil. Computing their plastic index that we determined the state of the soil
whether it in the plastic or liquid state, we can also justify if it is in the plastic to semi-solid
volume stability of soils in the field. In we did the shringkage thepansipit have 9.92 and, san
teodoro have 2.06%. we conclude that the other barangay is consistent in the stability and making
the pansipit got the highest rate and more stabilized than the other and making the san teodoro
is the lowest rate of the stability of soil. In terms of stability we can say that pansipit will give them
satisfaction and if the wanted to build infrastructures in san teodoro we can say that it needs a
soil stability to help them more efficient and good quality of soil.
References
[1] C. Costa (2014). “Liquid limit determination of clayey material by Casagrande method, fall cone test and
EBS parameter.”
https://www.tandfonline.com/doi/abs/10.1179/1753555714Y.0000000153
[2] Ahmed AtefGadallah, (2000) “Determination Of Consistency Limits Of Soils By Moisture -Tension
Method.” http://publications.iowa.gov/17265/
[3] E.R. Russell, (1965) “A Study To Correlate Soil Consistency Limits With Soil Moisture Tensions.”
http://publications.iowa.gov/17265/1/IADOT_hr27_Correlate_Soil_Consistency_Limits_Soil_Moisture_Ten
sions_1965.pdf
[4] Y. Wasti, M. H. Bezirci, (1999). “Determination of the consistency limits of soils by the fall cone test.”
http://www.nrcresearchpress.com/doi/abs/10.1139/t86-033#.W28Tzc4zZdg
[5] Guadalupe Dejarme Calalang, Gilles Colinet, (2002). A review of soils and crops in the Bukidnon
[6] Jairo I. Monte, Stephanie C. Cabasan, Mikko Martin S. Geyrozaga (2005). Soil Quality Assessment for
https://uruae.org/siteadmin/upload/AE09172019.pdf
TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
MANILA CAMPUS
SOIL MECHANICS
CE 401
CE41KA1
FINAL REQUIREMENT
MANUSCRIPT
SUBMITTED TO:
DATE SUBMITTED:
OCTOBER 12, 2018