Continue with configuration dialog?

[yes/no]: n

Press RETURN to get started!

Router>en
Router#
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#hostname ARUSHA
ARUSHA(config)#
ARUSHA(config)#
ARUSHA(config)#enable pass 1234
ARUSHA(config)#
ARUSHA(config)#line vty 04
ARUSHA(config-line)#pass 1234
ARUSHA(config-line)#login
ARUSHA(config-line)#exit
ARUSHA(config)#line console 0
ARUSHA(config-line)#pass 1234
ARUSHA(config-line)#login
ARUSHA(config-line)#exit
ARUSHA(config)#
ARUSHA(config)#int
ARUSHA(config)#interface s
ARUSHA(config)#interface serial 0/0/1
ARUSHA(config-if)#ip ad
ARUSHA(config-if)#ip address 172.20.0.98 255.255.255.252
ARUSHA(config-if)#no shu

ARUSHA(config-if)#
%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up

ARUSHA(config-if)#
ARUSHA(config-if)#exit
ARUSHA(config)#int
ARUSHA(config)#interface G
ARUSHA(config)#interface GigabitEthernet 0/0
ARUSHA(config-if)#IP ADD
ARUSHA(config-if)#IP ADDress 172.20.0.65 255.255.248
^
% Invalid input detected at '^' marker.
ARUSHA(config-if)#IP ADDress 172.20.0.65 255.255.255.248
ARUSHA(config-if)#no shu

ARUSHA(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

ARUSHA(config-if)#
ARUSHA(config-if)#
ARUSHA(config-if)#
ARUSHA#
%SYS-5-CONFIG_I: Configured from console by console

ARUSHA#
ARUSHA#
ARUSHA#show ip protocol
ARUSHA#show ip protocol?
protocols
ARUSHA#show ip protocol?
protocols
ARUSHA#show ip protocol?
protocols